scholarly journals Characteristics of sweet potatoes flour used as emergency food based on the type of varieties and the duration of fermentation

2018 ◽  
Vol 1 (1) ◽  
pp. 48-56
Author(s):  
Marleen Sunyoto ◽  
◽  
Roby Andoyo ◽  
Keyword(s):  
Starch Content ◽  
Block Design ◽  
Raw Material ◽  
Sweet Potatoes ◽  
Physical Chemical ◽  
Randomized Block Design ◽  
High Starch Content ◽  
Good Potential ◽  
High Starch ◽  
Swelling Volume

Sweet potato breeding at the Padjadjaran University farmland has produced new clones of sweet potatoes, Awachy 5 and Biang Varieties. Both clones contain high starch content, 25.46% and 15.96% respectively, having a good potential to be processed into flour as raw material for emergency food. However, due to poorly functional and amylograph characteristics, the clones need to be modified, one of which through fermentation. The objective of the study was to select the best varieties type of sweet potatoes and to determine the appropriate duration of fermentation to produce fermented sweet potatoes with the best physical, chemical and amylograph characteristics. The research method used was Randomized Block Design, consisting of 8 treatments and 3 repetitions. Awachy 5 and Biang Varieties were fermented for 0, 24, 48 and 72 hours respectively. The results showed that the fermented sweet potatoes flour of Awachy 5 with 72 hours of fermentation have produced the best characteristics of physical, chemical and amylograph, 7.21 ml/g swelling volume, 8.4% solubility, 84.37oC initial gelatinization temperature, 5092 cP peak viscosity, 2471 cP breakdown viscosity, 1089 cP setback viscosity, 68.04% starch content and 3.51% water content.

scholarly journals Pengaruh Waktu dan Suhu Pengeringan terhadap Kandungan Pati pada Pembuatan Bubuk Umbi Talas (Colocasia esculenta L. Schott) untuk Bioplastik

2019 ◽  
Vol 12 (1) ◽  
pp. 39-49
Author(s):  
Musthofa Lutfi ◽  
Alin Rosyidatul Afidah SR ◽  
Sandra Malin Sutan ◽  
Gunomo Djoyowasito
Keyword(s):  
Agricultural Sector ◽  
Starch Content ◽  
Block Design ◽  
Colocasia Esculenta ◽  
Treatment Temperature ◽  
High Yield ◽  
Drying Time ◽  
Randomized Block Design ◽  
High Starch Content ◽  
High Starch

Abstrak. Sektor pertanian merupakan salah satu sektor usaha di Indonesia yang banyak menghasilkan produk makanan untuk kebutuhan pangan masyarakat Indonesia. Salah satu bagian organ tanaman yang dapat dimanfaatkan adalah umbi. Kategori tanaman untuk jenis umbi-umbian ini sangat beragam. Salah satunya adalah umbi talas. Talas merupakan tanaman yang mengandung kadar pati tinggi yaitu 80%. Pati yang ada pada umbi talas ini sangat potensial untuk dijadikan bahan pembuatan bioplastik. Penelitian ini dilakukan untuk menguji kadar pati pada bubuk talas yang memiliki variasi suhu dan waktu pada pengeringannya. Metode penelitian ini menggunakan rancangan acak kelompok (RAK), yang terdiri dari dua faktor, yaitu: Faktor I : Waktu pengeringan (T) yang terdiri dari 4 taraf, yaitu T1 = 3 jam, T2 = 4 jam, T3 = 5 jam, dan T4 = 6 jam. Faktor II : Suhu Pengeringan (P) yang terdiri dari 3 taraf, yaitu P1 = 40°C, P2 = 50°C, dan P3 = 60°C. Berdasarkan hasil penelitian waktu dan suhu pengeringan memberikan pengaruh yang nyata terhadap kadar pati yang diperoleh. Semakin tinggi suhu dan waktu pengeringan maka kadar pati bubuk umbi talas akan semakin rendah. Perlakuan yang paling optimal dan terbaik dalam penelitian adalah perlakuan suhu 40oC waktu 4 jam. Pada perlakuan tersebut diperoleh kadar pati yang tinggi yaitu 76,89%, selain itu pada perlakuan tersebut dapat memperoleh rendemen bubuk umbi talas yang tinggi dalam waktu yang singkat.  The Effect of Time and Temperature of Drying on Starch Content in The Making of Taro Tuber Powder (Colocasia esculenta L. Schott) for Bioplastics Abstract. The agricultural sector is one of the business sectors in Indonesia that produces a lot of food products for the food needs of the Indonesian people. One part of the plant organ that can be used is tuber. The plant categories for these types of tubers are very diverse. One of them is taro tuber. Taro is a plant that contains a high starch content of 80%. Starch in taro tubers is very potential to be used as a material for making bioplastics. This research was conducted to test the starch content of taro powder which has variations in temperature and time on drying. This research method uses a randomized block design (RBD), which consists of two factors, namely: Factor I: Drying time (T) consisting of 4 levels, namely T1 = 3 hours, T2 = 4 hours, T3 = 5 hours, and T4 = 6 hours. Factor II: Drying Temperature (P) which consists of 3 levels, namely P1 = 40 ° C, P2 = 50 ° C, and P3 = 60 ° C. Based on the results of the research the drying time and temperature gave a significant effect on the starch content obtained. The higher the temperature and time of drying, the lower the starch content of powdered taro tuber. The most optimal and best treatment in the study was a treatment temperature of 40oC for 4 hours. In the treatment obtained a high starch content that is 76.89%, in addition to that the treatment can obtain a high yield of taro tuber powder in a short time.

scholarly journals STUDI OPTIMALISASI KOMPOSISI GLISEROL DAN KITOSAN TERHADAP KARAKTERISTIK SIFAT FISIK PLASTIK BIODEGRADABLE DARI LIMBAH NASI AKING DAN TEPUNG TAPIOKA

2021 ◽  
Vol 15 (1) ◽  
pp. 27
Author(s):  
Nisa Nurhidayanti ◽  
Indah Yulian Kusuma Wardani ◽  
Nur Ilman Ilyas
Keyword(s):  
Starch Content ◽  
Rice Flour ◽  
Biodegradable Plastics ◽  
Biodegradable Plastic ◽  
Raw Material ◽  
Tapioca Starch ◽  
Public Consumption ◽  
Composition Variation ◽  
High Starch Content ◽  
High Starch

Aking rice is rice waste that is no longer suitable for public consumption, however, the high starch content of aking rice can be used as a raw material for making biodegradable plastics. Good biodegradable plastic made from cassava starch and rice flour, to increase its elasticity and extensibility it is necessary to add chitosan additives and glycerol plasticizers. This study aims to determine the optimum conditions for the composition of glycerol and chitosan for the physical properties of biodegradable plastics made from aking rice and tapioca starch. Biodegradable plastics in this study were made with 3 grams of aking rice flour and 7 grams of tapioka flour with the addition of variations in the composition of chitosan (3 grams, 5 grams, and 7 grams) and the addition of variations in the composition of glycerol (2 ml, 4 ml, 6 ml, and 8 ml). As a result, the highest tensile strength value at 7: 2 composition variation is 41.29 MPa, the highest elongation percentage at 3: 8 composition variation is 135.8%, the highest water resistance at 7: 8 composition variation is -206%, the highest percent water absorption and the fastest biodegradation process at a variation of the composition of 3: 2, namely 1603% and completely degraded on the 4th day.Keywords: aking rice, biodegradable plastic, chitosan, glycerol and tapioca starch.

scholarly journals Preparasi Dan Karakterisasi Edible Film Dari Poliblend Pati Sukun-Kitosan

2013 ◽  
Vol 3 (2) ◽  
Author(s):  
Wini Setiani ◽  
Tety Sudiarti ◽  
Lena Rahmidar
Keyword(s):  
Tensile Strength ◽  
Water Uptake ◽  
Water Resistance ◽  
Starch Content ◽  
Raw Material ◽  
Edible Film ◽  
High Starch Content ◽  
High Starch ◽  
Grey Colour

Abstrak   Plastik biodegradable dan terbuat dari bahan terbarukan seperti edible film merupakan salah satu solusi permasalahan lingkungan. Bahan baku utamanya yaitu pati, karena keberadaannya melimpah serta beragam di Indonesia, salah satunya pati sukun yang memiliki kandungan pati cukup tinggi (60 %). Namun edible film berbahan dasar pati saja memberikan sifat mekanik dan ketahanan air yang masih rendah. Pada penelitian ini akan dipreparasi edible film dari poliblend pati sukun-kitosan dengan plasticizer sorbitol. Metode yang dilakukan yaitu preparasi dan karakterisasi pati sukun kemudian preparasi dan karakterisasi edible film. Hasil karakterisasi pati sukun yang diperoleh yaitu kadar pati total 76,39 %, kadar amilosa dan amilopektin berturut-turut 26,76 % dan 73,24 %, suhu gelatinisasi pati sukun 73,98 ºC, kadar air 22,38 % serta derajat kecerahan yang menunjukkan karakteristik cerah dan berwarna abu-abu pucat. Hasil karakterisasi edible film menunjukkan, dengan bertambahnya kitosan maka kuat tarik dan ketahanan air cenderung meningkat. Secara umum hasil terbaik edible film adalah pada formulasi pati sukun-kitosan 6:4 dengan nilai water uptake sebesar 212,98 %, nilai kuat tarik sebesar 16,34 MPa, nilai elongasi sebesar 6,00 % dan modulus young sebesar 2,72 MPa. Meskipun demikian, hasil analisis morfologi edible film pada formulasi pati sukun-kitosan 6:4 masih terdapat pori dan retakan.   Kata kunci : edible film, pati sukun, kitosa.   Abstract   Biodegradable and renewable plastic such as edible film is one of solution the environmental problem. The main raw material is from starch, because of it is abundant and varied in Indonesia, one of them is breadfruit starch which has enough high starch content (60 %). But edible film based on starch give less mechanical properties and less water resistance. In this research the edible film was made from poliblend of breadfruit starch-chitosan with sorbitol addition. The Method was done, preparation and characterization of breadfruit starch then preparation and characterization of edible film. The characteristic result of breadfruit starch was obtained for total starch content 76.39 %, content of amylose and amylopecktin were 26.76 % and 73.24 % respectively, the gelatinitation temperature of breadfruit starch was 73.98 ºC, water content 22,38 % and the degree of brightness showed bright characteristic and pale grey colour. The characteristic result of edible film showed the increasing of chitosan concentration, the tensile strength and water resistance tended to rise. Generally the best result of edible film was on breadfruit starch-chitosan formulation 6:4 g/g by the value of water uptake was 212.98 %, tensile strength was 16.34 MPa, elongation was 6,00 % and modulus young was 2,72 MPa. However, the result of mhorphology analysis showed that the edible film of breadfruit starch-chitosan formulation 6:4 are still pores and cracks.   Keywords : edible film, breadfruit starch, chitosan.

scholarly journals Arpanın İnsan Gıdası Olarak Değerlendirilmesi

2013 ◽  
Vol 1 (2) ◽  
pp. 51
Author(s):  
Mehmet Köten ◽  
Sabri Ünsal ◽  
Ayhan Atlı
Keyword(s):  
Animal Feed ◽  
Starch Content ◽  
Human Nutrition ◽  
Raw Material ◽  
Blood Cholesterol ◽  
Soluble Fiber ◽  
Human Food ◽  
High Starch Content ◽  
The World ◽  
High Starch

Barley, as animal feed, raw material for malting and human food, constitute an important part among cereal sources in the world. Majority of barley that produced both in Turkey and other countries of the world, is being used as animal feed. Poor baking quality, taste and appearance of barley restricted its use in human nutrition. However, recently high protein, fiber, especially β-glucan and high starch content appeal to food industry. Many scientific researches established that β-glucan, a soluble fiber, has an effect in healing coronary-hearth diseases, lowering blood cholesterol level, balancing blood sugar level, preventing obesity. Being a healthy cereal that can be used in various purposes, and an additive in many food products, barley is considered a very promising cereal, and research to increase possibilities of its use in human nutrition is being increased. In the literature, there has been researches on making noodles, bulgur, kavut (roasted cereal), breakfast cereals. In this study the researches relating to evaluation of barley, importance of which is increased every day, as human food was reviewed.

scholarly journals KARAKTERISTIK MORFOLOGI DAN KIMIAWI BEBERAPA VARIETAS UBI KAYU MANIS ASAL KECAMATAN PALAS, KABUPATEN LAMPUNG SELATAN BERDASARKAN UMUR PANEN YANG BERBEDA

2020 ◽  
Vol 14 (02) ◽  
pp. 126
Author(s):  
Siti Nurdjanah ◽  
Susilawati Susilawati ◽  
Udin Hasanudin ◽  
Ayu Anitasari
Keyword(s):  
Moisture Content ◽  
Significant Interaction ◽  
Raw Materials ◽  
Starch Content ◽  
Block Design ◽  
Raw Material ◽  
Manihot Esculenta Crantz ◽  
Significant Interaction Effect ◽  
Randomized Block Design ◽  
Starch Yield

Most of cassava grown in Palas, South Lampung District is sweet type cassava (Manihot esculenta Crantz) utilized as raw materials for cassava-based snack production. However, their characteristic had never been reported. The aims of the research were to determine the effect of varieties, harvesting age, and interaction between varieties and the harvesting age on morphology and chemical characteristics of sweet type cassava planted in Palas District, South Lampung. The experiment was factorial and arranged in a Complete Randomized Block Design (CRBD) with two factors and four replications. The first factor was cassava variety, i.e., manalagi (V1), mentega (V2), and krembi (V3). The second factor was the harvest age (U) i.e., 7-8 months (U1) and 8-9 months (U2). Morphology data were reported descriptively, while data for other characteristics were tested for homogeneity and additivity using Barlett and Tuckey test, then subjected to ANOVA, and further tested using Duncan test at the level of 5%. The results showed that the variety and harvest age significantly affected of water content, starch yield, starch content, amylose, and amylopectin. There was a significant interaction between varieties and age of harvest on moisture content, starch yield, and starch content, but there was no significant interaction effect on amylose and amylopectin. The highest value of moisture content was found in manalagi aged at 7-8 months (67.28% wb), the highest value of starch yield was found in manalagi age at 8-9 months of (16.34%), the highest value of starch content was found in mentega aged at 8-9 of months (17.52 % wb), the highest value of amylose was found in mentega aged at 8-9 of month (10.35% db), the highest value of amylopectin was found in krembi aged at 7-8 of month (92.78% db). Overall, krembi, manalagi, and mentega can be categorized as low-amylose cassava which has potential to be developed as raw material for crispy cassava-based snack. Keywords: harvesting age, krembi, low-amylose cassava, manalagi, mentega

scholarly journals Characteristics of avocado (Persea americana) and kluwih (Artocarpus camansi) seeds starch with different extraction methods

2022 ◽  
Vol 951 (1) ◽  
pp. 012095
Author(s):  
E Indarti ◽  
Nurlaila ◽  
M Muzaifa ◽  
S Noviasari ◽  
Z F Rozali ◽  
...  
Keyword(s):  
Starch Content ◽  
Extraction Methods ◽  
Persea Americana ◽  
Raw Material ◽  
Sodium Metabisulfite ◽  
Starch Properties ◽  
High Starch Content ◽  
High Starch ◽  
Starch Yield ◽  
Avocado Seed

Abstract Seed from avocado (Persea Americana) and kluwih (Artocarpus camansi) fruit are waste and by product from processing fruit. Due to the high starch content from both seeds, there are many extractions process have been applied. The immersed raw material in sodium metabisulfite solution affected to starch properties. The purpose of this study is to characterize of starch extracted with and without immersed in sodium metabisulfite solution. The results showed that the starch yield by immersed in alkaline solution was 21.6% for avocado seed starch and 24.4% for kluwih seed starch, while yield without immersed in sodium metabisulfite solution was 17.5% and 18,2% for avocado seed starch and kluwih seed starch, respectively. The starch content with sodium metabisulfite immersion process of avocado seed and kuwih seed were 79.26% and 72.62%, respectively. Meanwhile without the immersion process resulted starch of 75.13 and 67.30%, in avocado seed starch and kluwih seed starch, respectively. Furthermore, XRD and FTIR analysis were also carried out on starch to see the crystallinity character and functional groups contained in the extracted starch.

scholarly journals Kualitas ubi kentang pada dosis pupuk NPK dan umur panen yang berbeda

Jurnal Agro ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 14-24
Author(s):  
Kusumiyati Kusumiyati ◽  
Diky Indrawibawa ◽  
Syariful Mubarok ◽  
Gustiono Tegar Prasetyo
Keyword(s):  
Potato Tuber ◽  
Starch Content ◽  
Block Design ◽  
French Fries ◽  
Raw Material ◽  
Tuber Quality ◽  
Harvesting Time ◽  
Randomized Block Design ◽  
Npk Fertilizer ◽  
The Right

Semakin tingginya permintaan bahan baku kentang untuk french fries khususnya, perlu diimbangi oleh peningkatan suplai kentang dengan kualitas yang memenuhi persyaratan skala industri. Aplikasi dosis pupuk NPK yang tepat serta umur panen yang sesuai merupakan strategi dalam meningkatkan kualitas kentang. Penelitian bertujuan untuk menentukan  dosis pupuk NPK dan umur panen yang dapat menghasilkan ubi kentang dengan kualitas olah terbaik. Percobaan dilakukan dengan menggunakan Rancangan Acak Kelompok pola faktorial dengan dua faktor dan tiga ulangan. Faktor pertama, yaitu dosis pupuk NPK (50, 100, 150% dosis rekomendasi) dan umur panen (90, 105, 120 HST). Hasil penelitian memperlihatkan bahwa perlakuan dosis pupuk NPK dan umur panen tidak memperlihatkan interaksi. Kadar air dan gula reduksi tidak dipengaruhi oleh perlakuan dosis pupuk dan umur panen. Perlakuan dosis pupuk 150 kg N ha-1, 225 kg P ha-1, dan 225 kg K ha-1 menunjukkan kadar pati ubi tertinggi dengan tingkat kerenyahan french fries paling disukai. Perlakuan umur panen 120 hari setelah tanam (HST) memberikan kadar pati dan tingkat kesukaan warna dan kerenyahan french fries paling tinggi. AbstractThe potato demand is increasing, as a raw material for french fries in particular, yet followed by potato improvement to fulfil the industry requirement. The application of NPK fertilizer in appropriate dosage and harvesting time is the essential strategy to increase potato quality. This study aimed to determine the proper dosage of NPK and harvesting time to obtain the best characteristics of potato tuber for processing. The experimental design used a factorial randomized block design consisting of two factors; NPK fertilizer dosages (50, 100, 150% recommended dosage) and harvesting time (90, 105, 120 DAP). NPK fertilizer dosage had no interaction with harvesting time. Tuber water content and reducing sugars were not affected by NPK fertilizer dosage and harvesting time. The treatment of 150 kg N ha-1, 225 kg P ha-1 and 225 kg K ha-1 had the best tuber starch content, and after processing to be french fries, it showed the most favored crispness. Meanwhile, harvesting time at 120 DAP resulted in the highest tuber starch content, french fries colour and crispness score. Giving a certain dose of NPK fertilizer will affect the quality of potato tubers. The right harvesting time affects on the potato tuber quality.  

scholarly journals Evaluasi Hasil dan Kandungan Pati Mutan Ubi Kayu Hasil Iradiasi Sinar Gamma Generasi M1V4

2018 ◽  
Vol 46 (1) ◽  
pp. 64
Author(s):  
Isnani Subekti ◽  
Nurul Khumaida ◽  
Sintho Wahyuning Ardie ◽  
Dan Muhamad Syukur
Keyword(s):  
Specific Gravity ◽  
Gamma Ray ◽  
Starch Content ◽  
Block Design ◽  
Yield Potential ◽  
High Yield ◽  
Mutant Genotype ◽  
High Starch Content ◽  
High Starch ◽  
Gamma Irradiated

<em>Cassava is one of the important starch producer crops. Although Indonesia ranks as the third largest cassava producer country, Indonesia still imports cassava starch to meet the domestic demand in food and non-food industries. Gamma ray irradiation has been implemented to generate cassava mutants in order to support development of superior cassava variety, especially high yield and high starch content, especially high yield and high starch content. The objectives of this research were to evaluate the yield potential and the starch content of gamma irradiated 40 putative cassava mutants at M1V4 generation. This research was arranged in randomized complete block design with three replications and conducted at Cikabayan Experimental Field, IPB, Bogor, from May 2016 to March 2017. The starch content was measured using gravimetric methods. The results showed that five mutants, G2142, G3151, G2141, G1143, and G3111, had higher tuber weight per plant (6-7 kg per plant) compared to the background ‘Gajah’ genotype (4.7 kg per plant). ‘G2112’ mutant genotype showed higher starch content (23.86%) compared to the background ‘Gajah’ genotype (17.65%). The specific gravity (SG) was positively correlated with starch content (r = 0.905), indicated that the higher the SG, the higher the starch content of cassava.<br /><br />Keywords: gravimetric, mutant, specific gravity (SG), yield</em>

scholarly journals Nonparametric Stability Analysis of Starch Content of Gamma Irradiated Cassava at Three Locations in West Java, Indonesia

2020 ◽  
Vol 7 (02) ◽  
pp. 66-74
Author(s):  
Ferra Anggita Agustina ◽  
Nurul Khumaida ◽  
Sintho Wahyuning Ardie ◽  
Muhamad Syukur
Keyword(s):  
Raw Materials ◽  
Starch Content ◽  
Block Design ◽  
Gravimetric Method ◽  
Static Stability ◽  
Stem Cuttings ◽  
West Java ◽  
New Variety ◽  
High Starch Content ◽  
High Starch

Cassava is one of the largest starch producing tuber crops in Indonesia. Tapioca from cassava starch can be used as a raw materials for a variety of foods including biscuits, instant porridge, meatball, sausage, nuggets, and flour condiment. Breeding programs to improve cassava yield and starch content by using mutagen gamma rays irradiation was tested in four cassava generations (M1V4). Cassava is propagated by stem cuttings and the new characteristic obtained from gamma irradiation mutation is stable and can be passed from one generation to the next. Cassava mutants were obtained by evaluating the performance in different environmental conditions. The testing of yield adaptability and stability through a series of multi location is an important step before a new variety can be released. The aim of this research was to compare nonparametric stability and to evaluate the stability of the starch content of 16 genotypes (14 mutants and 2 varieties) in three locations in West Java Province i.e. Tapos (Depok), Cikarawang (Bogor), and Ciseeng (Bogor). Experiments were conducted in a completely randomized block design with three replications nested in each environment. Testing of yield stability in this study used four approaches with 10 parameters of nonparametric method. Starch content was estimated using gravimetric method. Based on frequency stability ranking of starch content from gravimetric method the G63142 genotype had the highest starch content estimation (29.99%), and the top five genotypes with high starch content were G63142, G61142, “Manggu”, G62151, and G63124. G61142 was categorized as genotype with static and dynamic stability, therefore this genotype is a very potential mutant to be released, whereas G63124 is categorized as a genotype with a static stability. Genotypes G63142, G62151, and “Manggu” had variable but relatively high starch content.

Sign in / Sign up

Export Citation Format

Share Document