scholarly journals Ethnomathematics Activity in Tulungagungan Shibori Fabric Production

Author(s):  
Ratih Puspasari ◽  
Setyo Hartanto ◽  
Moh. Gufron ◽  
Pradnyo Wijayanti ◽  
Mochammad Amirudin ◽  
...  
Keyword(s):  
2021 ◽  
pp. 004051752110062
Author(s):  
Weiran Qian ◽  
Xiang Ji ◽  
Pinghua Xu ◽  
Laili Wang

Recycled polyester textile fibers stemming from waste polyester material have been applied in the textile industry in recent years. However, there are few studies focusing on the evaluation and comparison of the environmental impacts caused by the production of virgin polyester textiles and recycled polyester textiles. In this study, the carbon footprint and water footprint of virgin polyester textiles and recycled polyester textiles were calculated and compared. The results showed that the carbon footprint of the virgin polyester textiles production was 119.59 kgCO2/100 kg. Terephthalic acid production process occupied the largest proportion, accounting for 45.83%, followed by polyester fabric production process, ethylene production process, paraxylene production process, ethylene glycol production process and polyester fiber production process. The total carbon footprint of waste polyester recycling was 1154.15 kgCO2/100 kg, approximately ten times that of virgin polyester textiles production. As for the water footprint, it showed that virgin polyester fabric production and recycled polyester fabric production both had great impact on water eutrophication and water scarcity. Chemical oxygen demand caused the largest water eutrophication footprint, followed by ammonia-nitrogen and five-day biochemical oxygen demand. The water scarcity footprint of virgin polyester fabric production and recycled polyester fabric production was 5.98 m3 H2Oeq/100 kg and 1.90 m3 H2Oeq/100 kg, respectively. The comprehensive evaluation of carbon footprint and water footprint with the life cycle assessment polygon method indicated that the polyester fabric production process exhibited greater environmental impacts both for virgin polyester and recycled polyester.


Author(s):  
Dulce Maria Holanda Maciel ◽  
Luísa Córdova Wandscheer ◽  
Daniela Novelli

Thinking about innovations that reduce environmental impact and offer quality consumer goods is a way of proposing a future scenario governed by eco-efficiency values. Through an exploratory bibliographic and documentary research, which qualitatively analyses Kombucha authors and fermenters, this article seeks to identify the relationship between biomimetics and bacterial fabric production as an eco-efficient product in the fashion market chain. The general objective of this case study is to explain the fermentation process to encourage the search for raw materials inserted in the sustainability proposal.


2020 ◽  
Vol 5 (2) ◽  
pp. 446-452
Author(s):  
Ruslan R ◽  
Agrippina Wiraningtyas ◽  
Ahmad Sandi ◽  
Muhammad Nasir

The "Nari-Nari" Weaving Village in Rabadompu Timur Village, Bima City, is a community group engaged in the weaving industry which has been carried on for generations. During this time, Bima woven fabric products use yarn raw material that has been colored using synthetic dyes. Yarn with synthetic dyes has a more diverse color, the fabric coloring process is easier and the cost is cheap, but synthetic dyes are carcinogenic and harmful to the environment. The solution to the problems faced by using natural dyes obtained from plants. This activity aims to train the Nari-Nari weaving group in yarn coloring using natural dyes. The method used is training through several stages of the activity namely the stage of socialization of activities; the training stage of yarn dyeing and woven fabric production. The dyes used are yellow wood extract and mahogany wood. The results obtained in this activity are the colored yarn has a different color based on the extract of the dye and fixation material. In yellow wood obtained with a maroon red color on alum, black on tunjung and reddish beige on lime. In mahogany wood is obtained beige on alum, black gray on tunjung and beige on lime.  


2018 ◽  
Vol 89 (6) ◽  
pp. 1094-1104 ◽  
Author(s):  
Juyeon Han ◽  
Euijin Shim ◽  
Hye Rim Kim

This study aims to compare different conditions in the three-step (cultivation, washing, and bleaching) production of white bacterial cellulose (BC) fabric to introduce it as a new type of fabric in the textile industry. The BC fabric was evaluated on the basis of its surface morphology and chemical structure. The “production BC” after the cultivation step was cultured using glucose as the carbon source in the Hestrin–Schramm (HS) medium. It was produced with the highest production yield (33.2 ± 6.85%), the highest thickness (0.35 ± 0.09 mm), and the flattest surface (211 nm). The bacteria remaining on “washed BC” after the washing step were washed out using 3% NaOH solution, and the nanoscale network structure maintained its integrity after washing. The white BC fabric after the bleaching step was bleached using 5% H2O2 solution. The white BC fabric with the highest white index (73.15 ± 1.09%) without a natural yellowish-brown color was produced. In the Fourier transform infrared spectroscopy (FTIR) spectra of the white BC fabric, the peaks of proteins and amino acids derived from the bacteria disappeared, while the cellulose I crystal structure was maintained. Also, X-ray diffraction analysis showed that the crystallinity of the white BC fabric increased compared to that of the control sample, and the highest crystallinity of 80.6% was obtained.


2020 ◽  
pp. 152808372091441
Author(s):  
Gizem Kayabaşı ◽  
Özgü Özen ◽  
Demet Yılmaz

Electronic or conductive textiles have attracted particular attention because of their potential applications in the fields of energy storage, supercapacitors, solar cells, health care devices, etc. Contrary to solid materials, the properties of textile materials such as stretchability, foldability, washability, etc. make the textiles ideal support materials for electronic devices. Therefore, in recent years, various conductive materials and production methods have been researched extensively to make the textiles conductive. In the present study, an alternative method based on imparting the conductivity to the fiber-based structure for the production of conductive textiles was established. Considering the contribution of unique characteristics of the fiber-based structure to the clothing systems, imparting the conductivity to the fibrous structure before yarn and fabric production may help to protect the breathable, lightweight, softness, deformable and washable of textile structure, and hence to improve the wearability properties of the electronic textiles. In the study, carbon black nanoparticles were selected as a conductive material due to low cost and easy procurable while cotton fiber together with other fiber types such as polyester, acrylic and viscose rayon fibers were used due to their common usage in the textile industry. In addition, various production parameters (CB concentration, feeding rate, etc.) were analyzed and the results indicated that the developed alternative method is capable to produce conductive yarns and electrical resistance of the yarns was about 94–4481 kΩ. The yarns had comparable yarn tenacity and breaking elongation properties, and still carried conductive character even after washing. In literature, there has been no effort to get conductivity in this manner and the method can be considered to be a new application for added-on or built-in future wearable electronics. Also, in the study, produced conductive yarns were used as a collector to gather the nanofibers onto the yarn to produce hybrid yarns enabling the production of functional textile products.


2012 ◽  
Vol 461 ◽  
pp. 606-610
Author(s):  
Wei Ping Luo

Focused on the S-shape deviation problem in the narrow fabric production process, this paper introduces an intelligent control system with DC servomotor as the actuator for an intermediate guide roll system. To improve the dynamic performance of the deviation control system and solve the motor vibration problem, the deviation control algorithm is proposed, which is related to intelligent PD feedback control combined with the feed-forward regulation for the system deviation, and its MatLab simulation results show its good performances and advantages. Furthermore, a technical approach for the deviation controller using DSP processor chip TMS320F2812 is presented. The system is applied in the intermediate guide roll system, and the application result indicates that the system is characterized by fast response and steady operation and it is a good solution for the motor vibration.


Author(s):  
Reza Saeidpourazar ◽  
Nader Jalili

This paper presents the design and development of a fused vision force feedback robust controller for a nanomanipulator used in nanofiber grasping and nano-fabric production applications. The RRP (Revolute Revolute Prismatic) manipulator considered here utilizes two rotational motors with 0.1 μrad resolution and one linear Nanomotor® with 0.25 nm resolution. Weighing just about 30g and having short lever arms (<5cm), the manipulator is capable of achieving well-behaved kinematic characteristics without the backlash in addition to atomic scale precision to guarantee accurate manipulation at the nanoscale. A mathematical model of the nanomanipulator is formulated and both direct and inverse kinematics of the system as well as dynamic equations are presented. A fused force vision feedback based modified optimal robust controller with perturbation estimation for nanomanipulator positioning is then derived and analyzed extensively. Unlike typical macroscale manipulator models and controllers, the controller development is not trivial here due to nanoscale movement and forces, coupled with unmodeled dynamics, nonlinear structural dynamics and mainly lack of position and velocity feedback in this nanomanipulator. Following the development of the fused force vision robust controller, numerical simulations of the proposed controller are preformed to demonstrate the positioning performance capability in nanofiber grasping applications.


2017 ◽  
pp. 313-334
Author(s):  
Jitendra Pratap Singh ◽  
Swadesh Verma
Keyword(s):  

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1251
Author(s):  
Stana Kovačević ◽  
Ivana Schwarz ◽  
Suzana Đorđević ◽  
Dragan Đorđević

The use of synthesized natural starches for the sizing process in fabric production is primarily an environmental contribution. Synthesized corn starch is environmentally friendly and productive, showing good results in cotton yarn sizing. Acrylamide (AA) and 2-hydroxyethyl methacrylate (HEMA) were applied for the grafting process of corn starch, and the initiators azobisisobutyronitrile (AIBN), potassium persulfate (KPS), and benzoyl peroxide (BP) were chosen to form the grafted monomers more effectively. The application of synthesized corn starch has been confirmed, especially with the AIBIN initiator in the grafting process of HEMA onto starch. The FTIR analysis confirmed that new and efficient products for sizing cotton yarns based on natural raw material (corn) were developed. The research showed that the synthesized corn starch improved physical-mechanical yarn properties and abrasion resistance and reduced yarn surface hairiness. Ultrasonic desizing of yarn and the use of a lower size concentration led to better results than desizing by washing, and the Tegewa numbers confirmed that the desizing process was successful.


Sign in / Sign up

Export Citation Format

Share Document