scholarly journals Performance Study of Pentacene based Organic Field Effect Transistor by Using monolayer, bilayer and trilayer and Gate Insulators

2020 ◽  
Vol 18 (44) ◽  
pp. 85-97
Author(s):  
Bushra H. Mohammed ◽  
Estabraq Talib Abdullah
Keyword(s):  
Field Effect ◽  
Field Effect Transistor ◽  
Field Effect Transistors ◽  
Electrical Performance ◽  
Output Curve ◽  
Drain Voltage ◽  
Performance Study ◽  
Current Increase ◽  
Gate Insulators ◽  
Effect Transistor

In this paper, Pentacene based-organic field effect transistors (OFETs) by using monolayer , bilayer and three layers of three  different gate insulators (ZrO2, PVA and CYEPL) , two layers of different gate insulators (ZrO2/PVA and ZrO2/CYEPL  ) and three layers of different gate insulators (ZrO2/PVA/CYEPL) were studied its electrical performance (output (Id-Vd)and transfer(Id-Vg) characteristics)by using the gradual-channel approximation model. The device exhibits a typical output curve of a field-effect transistor (FET). Furthermore, analysis of electrical characterization was done to investigate the source-drain voltage (Vd) dependent current and note The effects of gate dielectric on electrical performance for OFET. As this work  take account of  effect capacitance semiconductor in performance OFETs. The values of current which calculated using MATLAB simulation exhibited a value of current increase with increasing source-drain voltage.  Also the Organic Transistor modeling software was used to evaluate the transconductance calculated.

On Razors Edge: Influence of the Source Insulator Edge on the Charge Transport of Vertical Organic Field Effect Transistors

MRS Advances ◽  
2017 ◽  
Vol 2 (23) ◽  
pp. 1249-1257 ◽  
Author(s):  
F. Michael Sawatzki ◽  
Alrun A. Hauke ◽  
Duy Hai Doan ◽  
Peter Formanek ◽  
Daniel Kasemann ◽  
...  
Keyword(s):  
Charge Transport ◽  
Organic Semiconductors ◽  
Organic Solar Cells ◽  
Field Effect ◽  
Field Effect Transistor ◽  
Field Effect Transistors ◽  
Electrical Power ◽  
Strong Impact ◽  
Organic Field Effect Transistor ◽  
Effect Transistor

ABSTRACTTo benefit from the many advantages of organic semiconductors like flexibility, transparency, and small thickness, electronic devices should be entirely made from organic materials. This means, additionally to organic LEDs, organic solar cells, and organic sensors, we need organic transistors to amplify, process, and control signals and electrical power. The standard lateral organic field effect transistor (OFET) does not offer the necessary performance for many of these applications. One promising candidate for solving this problem is the vertical organic field effect transistor (VOFET). In addition to the altered structure of the electrodes, the VOFET has one additional part compared to the OFET – the source-insulator. However, the influence of the used material, the size, and geometry of this insulator on the behavior of the transistor has not yet been examined. We investigate key-parameters of the VOFET with different source insulator materials and geometries. We also present transmission electron microscopy (TEM) images of the edge area. Additionally, we investigate the charge transport in such devices using drift-diffusion simulations and the concept of a vertical organic light emitting transistor (VOLET). The VOLET is a VOFET with an embedded OLED. It allows the tracking of the local current density by measuring the light intensity distribution.We show that the insulator material and thickness only have a small influence on the performance, while there is a strong impact by the insulator geometry – mainly the overlap of the insulator into the channel. By tuning this overlap, on/off-ratios of 9x105 without contact doping are possible.

scholarly journals 2,2'-(Arylenedivinylene)bis-8-hydroxyquinolines exhibiting aromatic π-π stacking interactions as solution-processable p-type organic semiconductors for high-performance organic field effect transistors

2021 ◽  
Author(s):  
Suman Yadav ◽  
Shivani Sharma ◽  
Satinder K Sharma ◽  
Chullikkattil P. Pradeep
Keyword(s):  
Organic Semiconductors ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistor ◽  
Field Effect Transistors ◽  
Organic Field Effect Transistors ◽  
Organic Thin Film ◽  
Effect Transistor ◽  
Solution Processable ◽  
P Type

Solution-processable organic semiconductors capable of functioning at low operating voltages (~5 V) are in demand for organic field-effect transistor (OFET) applications. Exploration of new classes of compounds as organic thin-film...

scholarly journals Diacenopentalene dicarboximides as new n-type organic semiconductors for field-effect transistors

2016 ◽  
Vol 4 (37) ◽  
pp. 8758-8764 ◽  
Author(s):  
Gaole Dai ◽  
Jingjing Chang ◽  
Linzhi Jing ◽  
Chunyan Chi
Keyword(s):  
Organic Semiconductors ◽  
Electron Mobility ◽  
Field Effect ◽  
Field Effect Transistor ◽  
Field Effect Transistors ◽  
Processing Technique ◽  
Solution Processing ◽  
Effect Transistor

Two diacenopentalene dicarboximides were synthesized, and their devices made with solution-processing technique exhibited n-type field-effect transistor behavior with electron mobility of up to 0.06 cm2 V−1 s−1.

scholarly journals Analysis on Band Layer Design and J-V characteristics of Zinc Oxide Based Junction Field Effect Transistor

2020 ◽  
Vol 1 (2) ◽  
pp. 14-21
Author(s):  
Chaw Su Nandar Hlaing Chaw ◽  
Thiri Nwe
Keyword(s):  
Zinc Oxide ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistor ◽  
Field Effect Transistors ◽  
Characteristic Curve ◽  
Vital Role ◽  
Semiconductor Material ◽  
Mathematical Equations ◽  
Effect Transistor

This paper presents the band gap design and J-V characteristic curve of Zinc Oxide (ZnO) based on Junction Field Effect Transistor (JFET). The physical properties for analysis of semiconductor field effect transistor play a vital role in semiconductor measurements to obtain the high-performance devices. The main objective of this research is to design and analyse the band diagram design of semiconductor materials which are used for high performance junction field effect transistor. In this paper, the fundamental theory of semiconductors, the electrical properties analysis and bandgap design of materials for junction field effect transistor are described. Firstly, the energy bandgaps are performed based on the existing mathematical equations and the required parameters depending on the specified semiconductor material. Secondly, the J-V characteristic curves of semiconductor material are discussed in this paper. In order to achieve the current-voltage characteristic for specific junction field effect transistor, numerical values of each parameter which are included in analysis are defined and then these resultant values are predicted for the performance of junction field effect transistors. The computerized analyses have also mentioned in this paper.

scholarly journals Numerical Evaluation of the Effect of Geometric Tolerances on the High-Frequency Performance of Graphene Field-Effect Transistors

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 3121
Author(s):  
Monica La Mura ◽  
Patrizia Lamberti ◽  
Vincenzo Tucci
Keyword(s):  
High Frequency ◽  
Communication Systems ◽  
Field Effect ◽  
Field Effect Transistor ◽  
Field Effect Transistors ◽  
Channel Length ◽  
Geometrical Parameters ◽  
Effect Transistor ◽  
Rf Performance ◽  
The Impact

The interest in graphene-based electronics is due to graphene’s great carrier mobility, atomic thickness, resistance to radiation, and tolerance to extreme temperatures. These characteristics enable the development of extremely miniaturized high-performing electronic devices for next-generation radiofrequency (RF) communication systems. The main building block of graphene-based electronics is the graphene-field effect transistor (GFET). An important issue hindering the diffusion of GFET-based circuits on a commercial level is the repeatability of the fabrication process, which affects the uncertainty of both the device geometry and the graphene quality. Concerning the GFET geometrical parameters, it is well known that the channel length is the main factor that determines the high-frequency limitations of a field-effect transistor, and is therefore the parameter that should be better controlled during the fabrication. Nevertheless, other parameters are affected by a fabrication-related tolerance; to understand to which extent an increase of the accuracy of the GFET layout patterning process steps can improve the performance uniformity, their impact on the GFET performance variability should be considered and compared to that of the channel length. In this work, we assess the impact of the fabrication-related tolerances of GFET-base amplifier geometrical parameters on the RF performance, in terms of the amplifier transit frequency and maximum oscillation frequency, by using a design-of-experiments approach.

Incremental Drain-Voltage-Ramping Training Method for Ferroelectric Field-Effect Transistor Synaptic Devices

2021 ◽  
pp. 1-1
Author(s):  
Manh-Cuong Nguyen ◽  
Kitae Lee ◽  
Sihyun Kim ◽  
Sangwook Youn ◽  
Yeongjin Hwang ◽  
...  
Keyword(s):  
Field Effect ◽  
Field Effect Transistor ◽  
Training Method ◽  
Drain Voltage ◽  
Effect Transistor
Sign in / Sign up

Export Citation Format

Share Document