Failure Analysis of Welded Structures

2021 ◽  
pp. 695-714
Author(s):  
Duane K. Miller ◽  
Curtis L. Decker
Keyword(s):  
Failure Analysis ◽  
Case Studies ◽  
Holistic Approach ◽  
Welded Structures ◽  
Service Failures ◽  
Holistic Perspective ◽  
Common Location ◽  
Causative Factors ◽  
The Future ◽  
Welded Connection

Abstract Welded connections are a common location for failures for many reasons, as explained in this article. This article looks at such failures from a holistic perspective. It discusses the interaction of manufacturing-related cracking and service failures and primarily deals with failures that occur in service due to stresses caused by externally applied loads. The purpose of this article is to enable a failure analyst to identify the causative factors that lead to welded connection failure and to identify the corrective actions needed to overcome such failures in the future. Additionally, the reader will learn from the mistakes of others and use principles that will avoid the occurrence of similar failures in the future. The topics covered include failure analysis fundamentals, welded connections failure analysis, welded connections and discontinuities, and fatigue. In addition, several case studies that demonstrate how a holistic approach to failure analysis is necessary are presented.

A Study of Pad Contamination Defect and Removal

2008 ◽  
Author(s):  
K.A. Mohammad ◽  
L.J. Liu ◽  
S.F. Liew ◽  
S.F. Chong ◽  
D.G. Lee ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Gate Oxide ◽  
Action Plans ◽  
Preventive Action ◽  
Oxide Breakdown ◽  
Reliability Level ◽  
The Future ◽  
Dry Etch ◽  
Removal Technique

Abstract The paper focuses on the pad contamination defect removal technique. The defect is detected at the outgoing inspection step. The failure analysis results showed that the defect is Fluorine type contamination. The failure analysis indicated many source contributors mainly from Fluorine based processes. The focus is in the present work is in the rework method for the removal of this defect. The combination of wet and dry etch processing in the rework routine is utilized for the removal of the defect and preventive action plans for in-line were introduced and implemented to avoid this event in the future. The reliability of the wafer is verified using various tests including full map electrical, electrical sort, gate oxide breakdown (GOI) and wafer reliability level, passivation quick kill to ensure the integrity of the wafer after undergoing the rework routine. The wafer is monitored closely over a period of time to ensure it has no mushroom defect.

Failure Analysis of Single Shared Column Fail in DRAM Using Nano-Probing Technique

2008 ◽  
Author(s):  
Suk Min Kim ◽  
Jung Ho Lee ◽  
Jong Hak Lee ◽  
Hyung Ki Kim ◽  
Myung Sick Chang ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Failure Mechanisms ◽  
Electrical Characteristics ◽  
The Future ◽  
Electrical Analysis

Abstract We report an analysis of a single shared column fail on DRAM technology using a nano-probing technique in this work. The electrical characteristics of the failed transistors show that the column fails were caused by two different failure mechanisms: abnormal contact and implant profiles. We believe that electrical analysis using nano-probing will be a powerful tool for non-visible failure analysis in the future because it is impossible to clearly reveal these two different failure mechanisms solely using physical failure methods.

Case Studies of Brittle Interfacial Failures in Area Array Solder Interconnects

2000 ◽  
Author(s):  
George M. Wenger ◽  
Richard J. Coyle ◽  
Patrick P. Solan ◽  
John K. Dorey ◽  
Courtney V. Dodd ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Case Studies ◽  
Failure Modes ◽  
Electroless Nickel ◽  
Electrical Performance ◽  
Printed Wiring Board ◽  
Solder Interconnects ◽  
Area Array ◽  
Surface Finishes ◽  
Soldering Reaction

Abstract A common pad finish on area array (BGA or CSP) packages and printed wiring board (PWB) substrates is Ni/Au, using either electrolytic or electroless deposition processes. Although both Ni/Au processes provide flat, solderable surface finishes, there are an increasing number of applications of the electroless nickel/immersion gold (ENi/IAu) surface finish in response to requirements for increased density and electrical performance. This increasing usage continues despite mounting evidence that Ni/Au causes or contributes to catastrophic, brittle, interfacial solder joint fractures. These brittle, interfacial fractures occur early in service or can be generated under a variety of laboratory testing conditions including thermal cycling (premature failures), isothermal aging (high temperature storage), and mechanical testing. There are major initiatives by electronics industry consortia as well as research by individual companies to eliminate these fracture phenomena. Despite these efforts, interfacial fractures associated with Ni/Au surface finishes continue to be reported and specific failure mechanisms and root cause of these failures remains under investigation. Failure analysis techniques and methodologies are crucial to advancing the understanding of these phenomena. In this study, the scope of the fracture problem is illustrated using three failure analysis case studies of brittle interfacial fractures in area array solder interconnects. Two distinct failure modes are associated with Ni/Au surface finishes. In both modes, the fracture surfaces appear to be relatively flat with little evidence of plastic deformation. Detailed metallography, scanning electron microscopy (SEM), energy dispersive x-ray analysis (EDX), and an understanding of the metallurgy of the soldering reaction are required to avoid misinterpreting the failure modes.

SEM-Based Nanoprobing on 40, 32 and 28 nm CMOS Devices Challenges for Semiconductor Failure Analysis

2013 ◽  
Author(s):  
Erik Paul ◽  
Holger Herzog ◽  
Sören Jansen ◽  
Christian Hobert ◽  
Eckhard Langer
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Scanning Electron Microscope ◽  
Failure Analysis ◽  
Case Studies ◽  
State Of The Art ◽  
Root Cause ◽  
Highly Efficient ◽  
Technology Nodes ◽  
Scanning Electron

Abstract This paper presents an effective device-level failure analysis (FA) method which uses a high-resolution low-kV Scanning Electron Microscope (SEM) in combination with an integrated state-of-the-art nanomanipulator to locate and characterize single defects in failing CMOS devices. The presented case studies utilize several FA-techniques in combination with SEM-based nanoprobing for nanometer node technologies and demonstrate how these methods are used to investigate the root cause of IC device failures. The methodology represents a highly-efficient physical failure analysis flow for 28nm and larger technology nodes.

Process Induced Defects in the Silicon Substrate: Approaches for Successful Failure Analysis

2010 ◽  
Author(s):  
J.G. van Hassel ◽  
Xiao-Mei Zhang
Keyword(s):  
Failure Analysis ◽  
Case Studies ◽  
Silicon Substrate ◽  
Processing Technique ◽  
Electrical Characteristics ◽  
Localization Method ◽  
The Right ◽  
Induced Defects

Abstract Failures induced in the silicon substrate by process marginalities or process mistakes need continuous attention in new as well as established technologies. Several case studies showing implant related defects and dislocations in silicon will be discussed. Depending on the electrical characteristics of the failure the localization method has to be chosen. The emphasis of the discussion will be on the importance of the right choice for further physical de-processing to reveal the defect. This paper focuses on the localization method, the de- processing technique and the use of Wright etch for subsequent TEM preparation.

Case Studies in Atomic Force Probe Analysis

2006 ◽  
Author(s):  
Randal Mulder ◽  
Sam Subramanian ◽  
Tony Chrastecky
Keyword(s):  
Failure Analysis ◽  
Case Studies ◽  
Light Emission ◽  
Electrical Characterization ◽  
Logic Circuits ◽  
Contrast Imaging ◽  
Atomic Force ◽  
Measuring Surface ◽  
Analysis Environment

Abstract The use of atomic force probe (AFP) analysis in the analysis of semiconductor devices is expanding from its initial purpose of solely characterizing CMOS transistors at the contact level with a parametric analyzer. Other uses found for the AFP include the full electrical characterization of failing SRAM bit cells, current contrast imaging of SOI transistors, measuring surface roughness, the probing of metallization layers to measure leakages, and use with other tools, such as light emission, to quickly localize and identify defects in logic circuits. This paper presents several case studies in regards to these activities and their results. These case studies demonstrate the versatility of the AFP. The needs and demands of the failure analysis environment have quickly expanded its use. These expanded capabilities make the AFP more valuable for the failure analysis community.

Device Selection for Failure Analysis of Chain Fails Using Diagnosis Driven Yield Analysis

2011 ◽  
Author(s):  
Chris Schuermyer ◽  
Brady Benware ◽  
Graham Rhodes ◽  
Davide Appello ◽  
Vincenzo Tancorre ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Case Studies ◽  
Yield Analysis ◽  
Analysis Methodology ◽  
Device Selection ◽  
Selection For ◽  
Random Defects

Abstract This work presents the first application of a diagnosis driven approach for identifying systematic chain fail defects in order to reduce the time spent in failure analysis. The zonal analysis methodology that is applied separates devices into systematic and random populations of chain fails in order to prevent submitting random defects for failure analysis. Two silicon case studies are presented to validate the production worthiness of diagnosis driven yield analysis for chain fails. The defects uncovered in these case studies are very subtle and would be difficult to identify with any other methodology.

Combine Micro-Probing and OBIRCH to Catch Non-Recognizable Fault in RF and Mixed-Mode Integrated Circuits

2007 ◽  
Author(s):  
Cha-Ming Shen ◽  
Yen-Long Chang ◽  
Lian-Fon Wen ◽  
Tan-Chen Chuang ◽  
Shi-Chen Lin ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Radio Frequency ◽  
Failure Analysis ◽  
Case Studies ◽  
Mixed Mode ◽  
Failure Mechanisms ◽  
Deep Submicron ◽  
Digital Logic ◽  
Successful Approach ◽  
Cmos Processes

Abstract Highly-integrated radio frequency and mixed-mode devices that are manufactured in deep-submicron or more advanced CMOS processes are becoming more complex to analyze. The increased complexity presents us with many eccentric failure mechanisms that are uniquely different from traditional failure mechanisms found during failure analysis on digital logic applications. This paper presents a novel methodology to overcome the difficulties and discusses two case studies which demonstrate the application of the methodology. Through the case studies, the methodology was proven to be a successful approach. It is also proved how this methodology would work for such non-recognizable failures.

Advanced Acoustic Micro Imaging Applications: Deciphering Multiple Acoustic Echoes and Reflections

2004 ◽  
Author(s):  
Andrew J. Komrowski ◽  
Luis A. Curiel ◽  
Daniel J. D. Sullivan ◽  
Quang Nguyen ◽  
Lisa Logan-Willams
Keyword(s):  
Failure Analysis ◽  
Case Studies ◽  
New Technologies ◽  
Electronic Packages ◽  
Advanced Packaging ◽  
Ic Package ◽  
Non Destructive

Abstract The acquisition of reliable Acoustic Micro Images (AMI) are an essential non-destructive step in the Failure Analysis (FA) of electronic packages. Advanced packaging and new IC materials present challenges to the collection of reliable AMI signals. The AMI is complicated due to new technologies that utilize an increasing number of interfaces in ICs and packages. We present two case studies in which it is necessary to decipher the acoustic echoes from the signals generated by the interface of interest in order to acquire trustworthy information about the IC package.

Sign in / Sign up

Export Citation Format

Share Document