scholarly journals MILKING EQUIPMENT OF " YALYNKA" (“HERRINGBONE”) "EUROCLASS 1200" TYPE TESTING RESULTS

2021 ◽  
Author(s):  
V. Smolyar ◽  
◽  
V. Rozhenko
Keyword(s):  
Technological Process ◽  
Low Voltage ◽  
Experimental Testing ◽  
Electricity Consumption ◽  
Electrical Equipment ◽  
Evidence Base ◽  
Average Intensity ◽  
Research Results ◽  
Machine Milking ◽  
Technical Regulations

Abstract The purpose of the research is – to evaluate the milking platform of "Yalynka" ("Herringbone") "EuroClass 1200" type manufactured by "GEA" (Germany) for milking cows based on the results of experimental testing. Research methods. During the testing of the milking parlor "Yalynka" "EuroClass 1200" type the quality of the technological process was determined using the methods described in ISO 5707:2007, ISO 6690:2007, DSTU 7435:2013 and DSTU 3662:2018, operational-technological and economic evaluation was carried out according to DSTU 8424:2015 and DSTU 4397:2005, safety and ergonomics of the equipment were determined according to DSTU EN ISO 12100:2014. Research results. According to the results of experimental testing, it was established that the milking parlor "Yalinka" "EuroClass 1200" type of German production at the appropriate level performs the technological process of machine milking of cows. The obtained research results showed that the average total milking time of one cow is 5,07 minutes, the average intensity of milk excretion as a whole during milking – 2,35 kg / min. Milk obtained during milking cows in terms of quality corresponds to the grade "Extra" in accordance with DSTU 3662: 2018. Devices for controlling the process of milking cows "DemaTron 70" and computer herd management system "Dairy Plan C21" perform the technological process of milking cows in automatic mode, control over the implementation of technical parameters of the milking process, milk accounting and shutdown of milking machines. Based on the results of conformity assessment of the construction of the milking parlor "Yalinka" "EuroClass 1200" type in terms of safety and ergonomics, it is established that it meets the requirements of DSTU EN 12100: 2014 and DSTU 60204-1: 2015 for items related to its design, which is the evidence base of its compliance with the Technical Regulations for the Safety of Machinery and the Technical Regulations for Low-Voltage Electrical Equipment. Productivity of the milking installation-platform makes 70 heads / hour. Serves the milking parlor 2 operators of machine milking. Electricity consumption per milking a cow is 0,13 kWh. Annual operating costs are 4247 UAH / head in the conditions of 3 times milking of cows. Conclusions. For the first time in Ukraine, experimental testing of the milking parlor "Yalinka" "EuroClass 1200" type showed that the equipment satisfactorily performs the technological process of machine milking of cows with their loose housing and provides milk of the "Extra" grade. The «Euroclass 1200» «Yalinka» milking parlor is characterized by a high technical level and can be widely used in Ukraine.

scholarly journals Mechanical Properties of Graphene Oxide–Copper Composites

2016 ◽  
Vol 61 (2) ◽  
pp. 863-868 ◽  
Author(s):  
P. Duda ◽  
R. Muzyka ◽  
Z. Robak ◽  
S. Kaptacz
Keyword(s):  
Graphene Oxide ◽  
Tribological Properties ◽  
Low Voltage ◽  
Electrical Equipment ◽  
Oxide Content ◽  
Large Current ◽  
Current Densities ◽  
Materials Used ◽  
System Disk ◽  
Positive Effect

Abstract Due to their characteristics, sintered Cu-C composites are materials used in electrical equipment. These characteristics include high electrical conductivity, thermal conductivity and excellent resistance to abrasion. Currently, graphite nanopowder is used successfully as a carbon material. Metal-graphite, which is created on its basis, exists in different proportions of graphite to metal. A larger graphite content has a positive effect on smaller wear of commutators and rings. In contrast, a material with a higher copper content is used at high current densities. An example of such machines is a DC motor starter characterized by low voltage and large current. Tribological properties of Cu-C composites depend on the form of carbon they include. Owing to the capability to manufacture graphene, it has become possible to produce composites with its content. The present study tested the effect of a graphene oxide content on tribological properties in contact with steel. Tests were conducted on a ball-on-disk apparatus in conditions of dry friction. Microscopic observation was performed on the Hitachi SU70 field emission electron microscope. EDS analyses were performed using the Thermo Scientific X-ray Microanalysis system. Disk wear and surface geometrical structure parameters (SGP) of the samples after tribological tests were determined on the basis of measurements made on the Talysurf 3D contact profilometer from Taylor Hobson.

scholarly journals Logical-probabilistic assessment of the occurrence of destruction during intersystem interactions in the electrical system of the seaport

2021 ◽  
Vol 2061 (1) ◽  
pp. 012131
Author(s):  
O N Litskevich ◽  
A P Litskevich
Keyword(s):  
Technological Process ◽  
Power Supply ◽  
Physical Nature ◽  
Electrical Equipment ◽  
Technical Condition ◽  
Power Line ◽  
Electrical System ◽  
Cable Line ◽  
Composite Object ◽  
Electrical Wear

Abstract This article solves the problem of a quantitative assessment of the occurrence of destruction in the intersystem interactions of the transport system and the electrical system of the seaport, in the conditions of the technological process in the seaport, which indicates its significant impact on the electrical system, as a result of which the reliability of the berthing power line is significantly reduced. The intersystem interactions that occur during the implementation of the technological process, as experience shows, are the causes of critical situations that occur at the border of areas of different physical nature, and the consequences are recorded, in the case under consideration, in the electrical system. A mathematical model describing intersystem destruction in quantitative form is presented in this paper using a logical-probabilistic model that reflects internal and external relationships. In the object under study, the destructive cause (collision) and the consequence (accumulation of electrical damage in the insulation of the cable line) are in the same object (the mooring power supply unit), and this is limited to the effects of intersystem destruction. In such a statement, the object of power supply of the technological process and equipment is considered as a composite object containing a cable line and an electric contact column. The problem being formulated is an important and relevant scientific task, which includes not only the question of identifying the causes of increased electrical wear of the power line, but also the development of methods for obtaining quantitative results, and in practical terms also involves the diagnosis of the technical condition of electrical equipment and timely preventive maintenance.

scholarly journals RESULTS OF TESTING OF MODERN INDIVIDUAL MILKING INSTALLATION

2021 ◽  
Author(s):  
O. Kryshtal ◽  
Keyword(s):  
Technological Process ◽  
Mass Fraction ◽  
Total Duration ◽  
Small Diameter ◽  
First Grade ◽  
Vacuum Pump ◽  
Average Intensity ◽  
Milking Machine ◽  
The Individual

The purpose of the research: comprehensive assessment of the individual milking unit of the company "Kurtsan" (Turkey) during operation. Methods of research: Analysis of the structural features of the individual milking unit performed by the observation method given to test sample, the quality of the machine was evaluated by standardized methods: the quality of the technological process and operational-technological indicators in accordance with the SOU 74.3-37-273, energy indices according to DSTU 2331, economic Indicators according to DSTU 4397, safety indicators and ergonomics according to DSTU IEES 60335-1, DSTU EN 60335-2-70. Research Results: The conducted research confirms a sufficiently high quality of the technological process of selection of milk in cows in the conditions of use of milking installation in a personal economy, which provides favorable conditions for the milking of the cow, taking into account its physiological features. Performance per hour of basic time is 10 heads. Milking installation works on the principle of a closed milking system, thanks to which milk does not contact the environment and immediately from the basin enters a sealed can. Such system protects milk from the possibility of bacterial and physical contamination. Milk obtained during milking by milking installation according to quality indicators (acidity, density, content of somatic cells, mass fraction of dry matter, mass fraction of fat) meets the requirements for the first grade according to DSTU 3662. Milking installation is equipped with a dry vacuum pump. Power consumption during installation does not exceed 0.54 kW. Specific electricity consumption for milking of one cow is 0.05 kWh / head. Annual operating expenses for milking of two cows in the farm are 1591.90 UAH / head. Conclusions. According to the testing of the individual milking plant manufacturing company "KURTSAN", it has been established that this installation reliably performs the technological process of machine milking of cows in milking can for their tethered maintenance and allows you to get milk of the first grade. The total duration of visiting one cow is 5.75 minutes. The average intensity of milk is 1.0 kg / min. Milking machine provides complete bodies of cows. The magnitude of the control manual feed is 50 ml. The milking machine is equipped with an adjustable pulsator of pairwise milking, which creates a manual milking process and works for a working vacuum of 40 ± 1 kPa, which prevents injury to dies and diseases of mastitis. In the cover the "Stop-Milk" system is installed, which prevents milk from entering a vacuum pump during the overflow of the poor, or water while washing All items are compactly assembled on a single cart. However, a small diameter of wheels on an unequal surface creates some inconvenience to the operator during the transportation of the machine with a filled milk capacity. The application of the installation increases the amount of milk received. Its gentle work does not harm the emotional and physical health of the cow: the dysfunctions during operation are not pushed, and light vibration creates a massage effect. Milking installation allows you to significantly reduce the labor of service personnel in an economy with a maintenance of 1 to 10 cows.

A Model of Voltage Distribution and Change of Current in the Network Containing Unaccounted Electricity Consumption

Vestnik MEI ◽  
2021 ◽  
pp. 91-99
Author(s):  
Ivan M. Kazymov ◽  
◽  
Boris S. Kompaneets ◽  
Keyword(s):  
Graphical Representation ◽  
Low Voltage ◽  
Electricity Consumption ◽  
Distribution Networks ◽  
Electrical Network ◽  
Electrical Networks ◽  
Voltage Distribution ◽  
Electrical Grids ◽  
Proposed Model ◽  
Nominal Voltage

The aim of the study is control of commercial losses in electrical grids, especially in low voltage grids, which is one of the priority lines of activities conducted by electric network companies. The complexity of solving this problem is stemming from the difficulty of exactly locating the commercial loss occurrence place under the conditions of extensively branched low and medium voltage electrical networks. Various methods are currently used to determine the commercial loss occurrence places. However, no effective methods have been created for determining the fact and place of unaccounted electricity consumption in networks under the conditions of performing remote analysis of networks based on the data from modern electricity meters used in the automated fiscal electricity metering system. These difficulties can be overcome by developing a model of voltage distribution and change of current in distribution networks of the 0.4--35 kV nominal voltage levels. A model of voltage distribution and changes of current for a network containing unaccounted electricity consumption is proposed. The effectiveness of using the proposed model has been theoretically substantiated; its applicability limits are defined, and the accuracy of the obtained results is estimated. Graphical representation of the proposed model, which is one of the electrical network digital imaging forms, can be used to analyze electrical networks for revealing if there is unaccounted electricity consumption in them. By using the proposed model of voltage distribution and change of current in the network, it is possible to represent the electrical network as a set of electrical parameters to analyze electrical networks for the presence of commercial losses.

scholarly journals Thyristor Arc Eliminator for Protection of Low Voltage Electrical Equipment

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2749 ◽  
Author(s):  
Karol Nowak ◽  
Jerzy Janiszewski ◽  
Grzegorz Dombek
Keyword(s):  
Lower Cost ◽  
Low Voltage ◽  
Short Circuit ◽  
Electrical Equipment ◽  
Power Network ◽  
System Operation ◽  
Test Circuit ◽  
Wide Range ◽  
Short Circuit Currents ◽  
Electrical Apparatus

The paper presents the layout of two opposing thyristors working as an Arc Eliminator (AE). The presented solution makes it possible to protect an electrical apparatus against the effects of an arcing fault. An Arc Eliminator is assumed to be a device cooperating with the protected apparatus. Thyristors were used because of their speed of operation and a relatively lower cost compared to other semiconductors with the same current-carrying capacity. The proposed solution, as one of the few currently available, makes it possible to eliminate the fault arc—both at short-circuit currents and current values to which overcurrent protections do not react. A test circuit was designed and made to study the effectiveness of the thyristor arc eliminator. A series of tests was carried out with variable impedance in the arc branch, including the influence of circuit inductance on arc time. It was found that the thyristor arc eliminator effectively protects devices powered from a low voltage power network against the effects of a fault or arc fault. The correctness of system operation for a wide range of impedance changes in the circuit feeding the arc location was demonstrated.

scholarly journals A Comparative Study of Electric Load Curve Changes in an Urban Low-Voltage Substation in Spain during the Economic Crisis (2008–2013)

2014 ◽  
Vol 2014 ◽  
pp. 1-14 ◽  
Author(s):  
Pedro M. Lara-Santillán ◽  
Montserrat Mendoza-Villena ◽  
L. Alfredo Fernández-Jiménez ◽  
Mario Mañana-Canteli
Keyword(s):  
Comparative Study ◽  
Economic Crisis ◽  
Low Voltage ◽  
Electricity Consumption ◽  
Load Curve ◽  
Consumption Values ◽  
Time Period ◽  
Selection Parameter ◽  
Day Of The Week ◽  
Daily Time

This paper presents a comparative study of the electricity consumption (EC) in an urban low-voltage substation before and during the economic crisis (2008–2013). This low-voltage substation supplies electric power to near 400 users. The EC was measured for an 11-year period (2002–2012) with a sampling time of 1 minute. The study described in the paper consists of detecting the changes produced in the load curves of this substation along the time due to changes in the behaviour of consumers. The EC was compared using representative curves per time period (precrisis and crisis). These representative curves were obtained after a computational process, which was based on a search for days with similar curves to the curve of a determined (base) date. This similitude was assessed by the proximity on the calendar, day of the week, daylight time, and outdoor temperature. The last selection parameter was the error between the nearest neighbour curves and the base date curve. The obtained representative curves were linearized to determine changes in their structure (maximum and minimum consumption values, duration of the daily time slot, etc.). The results primarily indicate an increase in the EC in the night slot during the summer months in the crisis period.

Methodical approaches to the substantiation of accommodation of the object for food products in the boundaries of sanitary-protective zones of enterprises of other lines of the industry

2020 ◽  
Vol 99 (11) ◽  
pp. 1308-1314
Author(s):  
Irina V. May ◽  
Svetlana A. Vekovshinina ◽  
Svetlana V. Kleyn ◽  
Nadejda V. Nikiforova
Keyword(s):  
Technological Process ◽  
Food Production ◽  
Raw Materials ◽  
Food Products ◽  
Evidence Base ◽  
Hazard Identification ◽  
Production Facility ◽  
Protection Zone ◽  
Quality Of Food

Introduction. In conditions of the high density of urban development, efficient use of municipal lands is of particular relevance. Food production facilities make up a significant sector of many cities’ economy, including centers of ferrous and non-ferrous metallurgy, chemistry, petrochemistry, mining, etc., i.e., settlements where significant areas are limited in use by sanitary protection zones. Resolution of the Government of the Russian Federation dated March 3, 2018, No. However, such a justification is a scientific and methodological problem since there is no regulatory consolidation of the procedure. The purpose of the study was to develop and practically test methodological approaches to justification the admissibility (inadmissibility) of placing a food production facility in the sanitary protection zone of enterprises in other line of the industry. Material and methods. Design and technical documentation were studied on sources of data on air quality at the industrial site and indoors, and the quality of food products. Authors performed hygienic assessment of the safety and quality of air, raw materials, water, and manufactured food products for compliance with sanitary requirements and standards. When analyzing potential threats to contamination of food products, a mechanism was used to isolate critical points of the technological process. Results. An algorithm for the formation of the evidence base of the absence (presence) of the negative impact on food quality, the fact of the location of the production facility in the sanitary protection zone of a large industrial enterprise on the quality of food products is proposed. On the example of the production of juices from natural concentrated products, each step of the algorithm has been worked out: analysis of the technological process of production; hazard identification, instrumental measurements of the quality of environmental objects and raw materials and products. Conclusion. The proposed algorithm allows creating a reliable evidence base for deciding on the admissibility (inadmissibility) of the location of the food production facility in the sanitary protection zone of the enterprise with a different type of activity, tested in real conditions of a large industrial unit. The algorithm can be used as a base for the widespread use and further improvement.

Sign in / Sign up

Export Citation Format

Share Document