scholarly journals Work Safety Management for Optimization Production Process

2019 ◽  
Vol 7 (11) ◽  
pp. 371-379
Author(s):  
Jacks Rodrigues da Silva ◽  
David Barbosa de Alencar ◽  
Alexandra Priscilla Tregue Costa ◽  
Antônio Estanislau Sanches
Keyword(s):  
Production Process ◽  
Occupational Safety ◽  
Safety Management ◽  
Behavioral Changes ◽  
Work Safety ◽  
Safety Standards ◽  
Safe Environment ◽  
Work Accidents ◽  
The Government ◽  
Safe Working

The safety at work of employees is not always viewed with due importance. However, with the help of technology, such as E-social, the government system that organizes companies to communicate in a unified way as information for their employees, it executes with whom employers comply with strict safety standards. The main objective of this article is to demonstrate that occupational safety management improves accident rates in the company through actions on enforcement methods that are the basic causes of accidents. What's more, quality, management, costs and other values ​​are better through behavioral changes. Within the Thematic service, we seek or develop conscientious and motivated employees, as a safe environment must be in place to support safe working employees. Therefore, after the implant or safety management system, you can reduce a satisfactory reduction of work accidents and get good results in the production process.

Research on Safety Management to Promote Mechanical Safety

2013 ◽  
Vol 765-767 ◽  
pp. 291-294
Author(s):  
Wen Long Liu ◽  
Hong Zhang
Keyword(s):  
Production Process ◽  
Safety Management ◽  
Safety Issues ◽  
Safety Standards ◽  
Safety Requirements ◽  
Social Organizations ◽  
Technical Institutes ◽  
Mechanical Products ◽  
Safety Production ◽  
The Government

Mechanical Safety is very important in safety production. Not only China, the machinery safety issues are still not optimistic. Safety becomes more and more important nowadays. So, to ensure the mechanical safety is not ones responsibility but all society. Measures must be taken jointly by the government, social organizations, enterprises and technical institutes to maintain the machinery safe. Government should develop the safety standards, the same as certification for social organizations. For enterprises, they must ensure that mechanical products meet the safety requirements. Strengthen the safety management in production process is the responsible of technical institutes. Together through a series of measures to make the mechanical safety situation has a good development in China.

scholarly journals Predictive Models of Accidents at Work in the Steel Sector as a Framework for Sustainable Safety

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 129
Author(s):  
Tomasz Małysa ◽  
Bożena Gajdzik
Keyword(s):  
Occupational Safety ◽  
Safety Management ◽  
Optimal Model ◽  
Work Safety ◽  
Sustainable Business ◽  
Combined Model ◽  
Steel Sector ◽  
Work Accidents ◽  
Combined Forecasting ◽  
Combined Forecasts

Work safety can be a component of the broadly understood sustainable enterprise approach that goes beyond the idea of sustainable development. Sustainability in an unpredictable and turbulent environment has many constellations, many aspects and many fields of the enterprise’s activity and it complements the rationality of the business. The aim is to understand the sustainability of safety, because this is the term we have adopted for rationality in occupational safety management, in the context of the analysis of work accidents in the Polish steel industry, with particular emphasis on the methodology of forecast assessment in the studied area, proposed by us. The realized forecasts were used for the creation of a combined model which formed the basis for formulating conclusions from the analysis. The publication presents the modeling of the victims of work accidents in the steel sector in Poland. Based on the research of the forecasts obtained, a downward trend is recorded in the number of persons injured in accidents at work in the steel sector. In order to select the optimal model, it was proposed to set combined forecasts. In order to select the optimal model, it was proposed to set combined forecasts. The obtained values of ex-ante forecasts in the combined model also confirmed the forecasted trends determined within the adaptation models. The study is a proposal to extend the combined forecasting methods used to assess occupational safety. We consciously chose to include the methodology of combined forecasting of the number of people injured in accidents in the interpretation of sustainability, because we see the possibility of interpreting accident rates in sustainable business in the future. In the publication, we propose the framework of the sustainable safety model as an element of work safety management in an enterprise. We are trying to answer the question about the place of accident prediction in sustainable safety.

scholarly journals Legal review of the implementation of work safety and health atpt multi nabatimaleo unit, pohuwato district

2019 ◽  
Vol 3 (2) ◽  
pp. 163-167
Author(s):  
HERLINA SULAIMAN
Keyword(s):  
Personal Protective Equipment ◽  
Management System ◽  
Occupational Safety ◽  
Safety Management ◽  
Health And Safety ◽  
Occupational Safety And Health ◽  
Occupational Accidents ◽  
Protective Equipment ◽  
Work Safety ◽  
Safety And Health

Implementation of Occupational Safety and Health at PT. Multi Nabati Unit Maleo is done by Enviromental Unit, Health and Safety. EHS is a policy applied by PT Multi Nabati Unit Maleo in providing protection for the safety and health of its workers. EHS is a direct handle or the first handle if there is an accident and also work to make preventive efforts to prevent accidents. In addition, the company develops the health and work safety management system (SMK3 & L). The efforts undertaken by PT Multi Nabati To reduce the risk of occupational accidents by applying: Engineering (engineering), Administration (administration) and Labor must use APD (Personal protective equipment).

scholarly journals Analysis of Occupational Safety and Health in the Production Process Section Using the Failure Mode And Effect Analysis (FMEA) Method at PT Mitra Mandiri Perkasa

Jurnal IPTEK ◽  
2021 ◽  
Vol 25 (1) ◽  
pp. 27-34
Author(s):  
Gatot Basuki HM
Keyword(s):  
Production Process ◽  
Occupational Safety ◽  
Raw Materials ◽  
Working Environment ◽  
Effect Analysis ◽  
Danger Signs ◽  
Safety And Health ◽  
Potential Failure ◽  
Work Accidents ◽  
Fmea Method

Based on the results of the analysis carried out, it was found that there were 29 work accidents in the turning wood production process for a period of 3 years, then after the classification was carried out based on the company's working environment conditions obtained 5 categories of work accidents. The results of the calculation of the risk prority number (RPN) show that the potential failure with the highest RPN level is that the hand is exposed to wood on the rip saw machine with an RPN value of 140. Proposed improvement is that machine operators must use PPE when doing work, provide a grace period when moving raw materials to rip saw machines to provide space for workers, routine inspections and always moving materials after being processed in the rip saw machines and giving danger signs in the production process area, improving standard operational procedures and periodic supervision in accordance with the applied K3 procedures.

scholarly journals Modern Trends in Occupational Safety Management

2019 ◽  
Vol 2 (2) ◽  
pp. 126-138
Author(s):  
Teresa Lis ◽  
Krzysztof Nowacki
Keyword(s):  
Occupational Health ◽  
Occupational Safety ◽  
Industrial Revolution ◽  
Safety Management ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Management Systems ◽  
The European Union ◽  
Work Safety ◽  
Systems Requirements

Abstract Problems related to work safety have been accompanying humanity since the dawn of time. In times before the Industrial Revolution, human and animal muscle strength was used to work, and “safe work” solutions were developed and introduced individually by the user or supervising the work. Only a change in the way work was done due to the industrial revolution, the introduction of new energy sources, the transformation of manufactories into factories and the birth of the working class brought about greater, concrete changes. It was at that time that various machines and devices began to be introduced into the workplace, which on the one hand improved work and on the other hand created more and more potentially dangerous situations. Security was started holistically and institutionally. With the transformation and return of capitalism, the subject of real work safety returned. Health and safety was to be not only a fashionable slogan, but a value that was supposed to guarantee profit – in accordance with the principle that accidents reduce productivity. It was also connected with the process of adapting Polish law in the field of health and safety to the law of the European Union (EU), which resulted from Poland’s pursuit of EU membership. Moreover, an important factor initiating these changes was the interest of enterprises in quality management systems compliant with the ISO 9000 series and environmental management systems compliant with the ISO 14000 series, and related attempts to adapt the system management concept to the area of occupational health and safety, resulting in PN-N standards 18000 series. This publication analyzes the new standard PN-ISO 45001:2018 – “Occupational health and safety management systems – Requirements with guidance for use” comparing it with the standard PN-N 18001:2004 – “Occupational health and safety management. Requirements”.

Research on Measures to Promote Mechanical Safety

2013 ◽  
Vol 380-384 ◽  
pp. 4614-4618
Author(s):  
Wen Long Liu ◽  
Hong Zhang
Keyword(s):  
Safety Management ◽  
Safety Issues ◽  
Safety Standards ◽  
Safety Requirements ◽  
Social Organizations ◽  
Technical Institutes ◽  
The World ◽  
Mechanical Products ◽  
Safety Production ◽  
The Government

Mechanical Safety is very important in safety production. Not only China, but all over the world, the machinery safety issues are still in study. Safety becomes more and more important nowadays. So, to ensure the mechanical safety is not ones responsibility but all society. Measures must be taken jointly by the government, social organizations, enterprises and technical institutes to maintain the machinery safe. Government should develop the safety standards, the same as certification for social organizations. For enterprises, they must ensure that mechanical products meet the safety requirements. Strengthen the safety management in production process is the responsible of technical institutes. Together through a series of measures to make the mechanical safety situation has a good development in China.

scholarly journals OPTIMALISASI PERLINDUNGAN HUKUM TENAGA KERJA DALAM ASPEK KESELAMATAN KERJA PADA PROYEK KONSTRUKSI DI WILAYAH BOGOR

2020 ◽  
Vol 12 (1) ◽  
pp. 41
Author(s):  
Dani Purwanto ◽  
Ujang Bahar ◽  
Endeh Suhartini
Keyword(s):  
Construction Project ◽  
Health And Safety ◽  
Legal Protection ◽  
Third Party ◽  
Work Safety ◽  
Safety Issues ◽  
Construction Company ◽  
Work Health ◽  
Work Accidents ◽  
The Government

Lack of awareness of workers is one of the factors causing work accidents that have occurred. This cannot be done as it should, so there are still frequent work accidents involving construction project workers. In the Bogor region itself, the issue of work safety is also a special concern of the government in realizing development. The method used by the author in this study is a descriptive legal normative research method, the implementation of work safety protection for construction project workers in Bogor City is still not running optimally, this is due to the absence of an agreement between workers and employers. Because in general construction project workers only have a working relationship with third parties outside the construction company. So that the participation of the government is needed to resolve work safety issues for construction project workers. The legal consequence arising from the absence of a work agreement for construction project workers is that they do not receive work health and safety insurance, other than that the wages received do not correspond to what has been provided by the company, because there is a third party tasked with coordinating these workers, so construction project workers do not have legal protection as mandated by law.

scholarly journals Work safety climate. Comparison of selected occupational groups

PLoS ONE ◽  
2020 ◽  
Vol 15 (12) ◽  
pp. e0243056
Author(s):  
Marta Stasiła-Sieradzka ◽  
Agata Chudzicka-Czupała ◽  
Marta Znajmiecka-Sikora
Keyword(s):  
Occupational Safety ◽  
Safety Climate ◽  
Safety Management ◽  
Health And Safety ◽  
Working Environment ◽  
Management Policy ◽  
Work Safety ◽  
Occupational Groups ◽  
Significant Difference ◽  
The Individual

Implementation of effective programs to improve occupational safety should be linked to an understanding of the specific nature of the given job. The aim of the research was to compare occupational groups with different job-related specificities: industrial production line workers, retail workers and mine rescuers, in terms of their assessment of the work safety climate. The survey covered 2,995 respondents with diversified demographic characteristics. The study used an abridged version of the Safety Climate Questionnaire by Znajmiecka-Sikora (2019) to assess 10 separate safety climate dimensions. The results of the MANOVA multivariate analysis, Wilks’ multivariate F-tests and univariate F tests prove that there is a statistically significant difference between the respondents representing the three occupational groups collectively in terms of global assessment of all work safety climate dimensions, and also indicate significant differences between workers belonging to the three occupational groups in terms of their assessment of the individual dimensions of the work safety climate, except the organization’s occupational health and safety management policy as well as technical facilities and ergonomics, which may be due to the universality of the requirements set for organizations with regard to these two aspects of safe behavior. The differences observed in the assessment of the remaining work safety climate dimensions induces one to promote more differentiated and individualized activities, taking into account the work specificity and the nature of the threats occurring in the respective working environment of the representatives of the different occupations. The difference in assessment of the work safety climate found in the research encourages one to create practical programs for safety, not only in the procedural and technical dimension, but also in the social and psychological one.

scholarly journals GAMBARAN TINGKAT PENGETAHUAN TENAGA KERJA PT’X’ TENTANG UNDANG-UNDANG DAN PERATURAN KESEHATAN DAN KESELAMATAN KERJA

2019 ◽  
Vol 6 (2) ◽  
pp. 69-81
Author(s):  
Andi Hendrawan
Keyword(s):  
Occupational Safety ◽  
Employee Performance ◽  
Sampling Technique ◽  
Company Performance ◽  
Knowledge Level ◽  
Safety Factors ◽  
Work Safety ◽  
Long Time ◽  
Level Of Knowledge ◽  
Work Accidents

Work safety has been a concern in government and business for a long time. Occupational safety factors are important because they are closely related to employee performance and in turn to company performance. The increasing availability of work safety facilities the less likely the occurrence of work accidents. Metpde used in this research is metodesurvey with approach of cross sectional.sampelyang used as many as 40 people with total sampling technique, Samples are asked to fill questionnaires distributed by researcher then collected and processed with statitik diskripttif. The results showed 10 samples have a good level of knowledge, 25 samples of sufficient knowledge level and 5 samples of knowledge level of bad.

scholarly journals Enterprise Work Safety Standardization Optimization Mode on VSM in China

2020 ◽  
Author(s):  
Dunwen Liu ◽  
Chun Gong ◽  
Yinghua Jian
Keyword(s):  
Management System ◽  
Production Management ◽  
Safety Management ◽  
Work Safety ◽  
Safety Production ◽  
The Government ◽  
Traditional Work ◽  
The One ◽  
Viable System ◽  
And Control

The work safety standardization of enterprises based on the traditional work safety theory has played a significant role in reducing the number of accidents and improving work safety to some extent in China. However, some problems are coming with the work safety standardization of enterprises developing constantly in China. On the one hand, it is not combined with the actual situation of the enterprise, lacking pertinence and specificity, these defects resulted that it is not integrated with original safety production management system of enterprise and make it difficult to carry out. On the other hand, there is a lack of systematic management methods for the work safety management system of enterprise, most of enterprises only pay attention to the inspection result rather than the process control. This means after the check of the government, many enterprises will relax to carry out the system. This paper puts forward a new method for optimizing the standardization management mode of work safety based on the Viable System Model(VSM), which can solve the defects of work safety standardization of enterprises management system. An optimization model of work safety standardization based on VSM was construct for explaining the process optimization and control of work safety standardization management. It can improve the connectivity between the enterprise and the government. The conclusion of this paper can provide reference for achieving the development and optimization of work safety standardization of enterprises in China.

Sign in / Sign up

Export Citation Format

Share Document