scholarly journals Analisis Pembangkit Listrik Berbasis Flywheel

2019 ◽  
Vol 17 (1) ◽  
pp. 95
Author(s):  
Jumadi Tangko ◽  
Remigius Tandioga ◽  
Ismail Djufri ◽  
Riza Haardiyanti
Keyword(s):  
Power Plant ◽  
Rotational Speed ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Moment Of Inertia ◽  
Mechanical Device ◽  
Load Bearing ◽  
Wheeled Vehicles ◽  
Load Conditions

Flywheel is a rotating mechanical device, which is generally used on four-wheeled vehicles. Flywheel has a moment of inertia that is able to withstand changes in rotational speed. The energy in flywheel is mechanical energy. This mechanical energy will be converted by generators into electrical energy. At the flywheel-based power plant, tests are carried out in the form of rotation, the generator power of the generator under no load or load conditions, and the time needed for this generator to survive. The results showed that the ability of the flywheel-based power plant in the condition without a backup supply to the motor in the condition of a generator without a load is able to generate power of 860.1 W for 22 seconds, while in a load-bearing generator capable of generating electricity by 708.75 W for 18 seconds 

scholarly journals Pengaruh jumlah nozzle terhadap kinerja turbin pelton sebagai pembangkit listrik di Desa Sumber Agung Kecamatan Suoh Kabupaten Lampung Barat

2020 ◽  
Vol 9 (2) ◽  
Author(s):  
Dwi Irawan ◽  
Eko Nugroho ◽  
Eko Widiyanto
Keyword(s):  
Power Plant ◽  
Power Efficiency ◽  
Mechanical Energy ◽  
Water Discharge ◽  
Electrical Energy ◽  
Outer Diameter ◽  
Impulse Turbine ◽  
Turbine Wheel ◽  
Hydro Power ◽  
Turbine Efficiency

A micro hydro power plant, or commonly known as a turbine is a power plant that utilizes the potential energy of water to be converted into mechanical energy which is then converted into electrical energy using a generator. The Pelton turbine is an extension of the impulse turbine with a split some blades dividing the jet into two equal beaks which are reversed sideways at the turbine wheel. This study aims to determine the effect of the number of nozzles to output power, efficiency, and electric power produced. In this study, a Pelton type water turbine was applied to a water source flowing from the mountains with a head of 26 m and 0.003167 m3/s water discharge. This study used 3 variations of the number of nozzles (single, double, and triple nozzle) with 9 mm outer diameter of nozzle and 35 mm nozzle length. The results of the research conducted, the turbine power is 419.53 watts, the turbine efficiency is 52%, and the generator power is 360 Watts for triple nozzle variation. The turbine power obtained is 388.83 Watts, the turbine efficiency is 48%, and the generator power is 234 Watts for double nozzle variation. And the power obtained is 367.47 Watts, the turbine efficiency is 45%, and the generator power is 175 Watts for single nozzle variations.

scholarly journals Wind power plant resilience

2010 ◽  
Vol 14 (2) ◽  
pp. 533-540 ◽  
Author(s):  
Naim Afgan ◽  
Dejan Cvetinovic
Keyword(s):  
Power Plant ◽  
Kinetic Energy ◽  
Energy Conversion ◽  
Wind Power ◽  
Wind Velocity ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Wind Power Plant ◽  
Electricity Cost ◽  
Resilience Index

A wind energy system transforms the kinetic energy of wind into mechanical or electrical energy that can be harnessed for practical use. Mechanical energy is most commonly used for pumping water in rural or remote locations. Electrical energy is obtained by connecting wind turbine with the electricity generator. The performance of the wind power plant depends on the wind kinetic energy. It depends on the number of design parameter of the wind turbine. For the wind power plant the wind kinetic energy conversion depends on the average wind velocity, mechanical energy conversion into electricity, and electricity transmission. Resilience of the wind power plant is the capacity of the system to withstand changes of the following parameters: wind velocity, mechanical energy conversion into electricity, electricity transmission efficiency and electricity cost. Resilience index comprise following indicators: change in wind velocity, change in mechanical energy conversion efficiency, change in conversion factor, change in transmission efficiency, and change in electricity cost. The demonstration of the resilience index monitoring is presented by using following indicators, namely: average wind velocity, power production, efficiency of electricity production, and power-frequency change. In evaluation of the resilience index of wind power plants special attention is devoted to the determination of the resilience index for situation with priority given to individual indicators.

Reduction of structural vibrations with the piezoelectric stacks ring

2020 ◽  
Vol 64 (1-4) ◽  
pp. 729-736
Author(s):  
Jincheng He ◽  
Xing Tan ◽  
Wang Tao ◽  
Xinhai Wu ◽  
Huan He ◽  
...  
Keyword(s):  
Vibration Control ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Structural Vibrations ◽  
Rotor Systems ◽  
Fea Model ◽  
Piezoelectric Stacks ◽  
Shunt Damping ◽  
Reduction Effect ◽  
Euler Bernoulli Beam

It is known that piezoelectric material shunted with external circuits can convert mechanical energy to electrical energy, which is so called piezoelectric shunt damping technology. In this paper, a piezoelectric stacks ring (PSR) is designed for vibration control of beams and rotor systems. A relative simple electromechanical model of an Euler Bernoulli beam supported by two piezoelectric stacks shunted with resonant RL circuits is established. The equation of motion of such simplified system has been derived using Hamilton’s principle. A more realistic FEA model is developed. The numerical analysis is carried out using COMSOL® and the simulation results show a significant reduction of vibration amplitude at the specific natural frequencies. Using finite element method, the influence of circuit parameters on lateral vibration control is discussed. A preliminary experiment of a prototype PSR verifies the PSR’s vibration reduction effect.

scholarly journals A Pot-Like Vibrational Microfluidic Rotational Motor

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 177
Author(s):  
Suzana Uran ◽  
Matjaž Malok ◽  
Božidar Bratina ◽  
Riko Šafarič
Keyword(s):  
Mathematical Model ◽  
Rotational Speed ◽  
Mechanical Energy ◽  
Real Life ◽  
Frequency Region ◽  
Theoretical Research ◽  
Practical Challenge ◽  
The Mathematical Model ◽  
Motor Structure ◽  
Proper Balance

Constructing a micro-sized microfluidic motor always involves the problem of how to transfer the mechanical energy out of the motor. The paper presents several experiments with pot-like microfluidic rotational motor structures driven by two perpendicular sine and cosine vibrations with amplitudes around 10 μm in the frequency region from 200 Hz to 500 Hz. The extensive theoretical research based on the mathematical model of the liquid streaming in a pot-like structure was the base for the successful real-life laboratory application of a microfluidic rotational motor. The final microfluidic motor structure allowed transferring the rotational mechanical energy out of the motor with a central axis. The main practical challenge of the research was to find the proper balance between the torque, due to friction in the bearings and the motor’s maximal torque. The presented motor, with sizes 1 mm by 0.6 mm, reached the maximal rotational speed in both directions between −15 rad/s to +14 rad/s, with the estimated maximal torque of 0.1 pNm. The measured frequency characteristics of vibration amplitudes and phase angle between the directions of both vibrational amplitudes and rotational speed of the motor rotor against frequency of vibrations, allowed us to understand how to build the pot-like microfluidic rotational motor.

scholarly journals In-grid solar-to-electrical energy conversion system modeling and testing

2012 ◽  
Vol 16 (suppl. 1) ◽  
pp. 159-171 ◽  
Author(s):  
Zoltan Corba ◽  
Vladimir Katic ◽  
Boris Dumnic ◽  
Dragan Milicevic
Keyword(s):  
Power Plant ◽  
Simulation Model ◽  
Energy Conversion ◽  
System Modeling ◽  
Electrical Energy ◽  
Photovoltaic Cell ◽  
Modeling Methods ◽  
Photovoltaic Power ◽  
Conversion System ◽  
Energy Conversion System

In this study, a simulation model of in-grid solar-to-electrical energy conversion system is presented. In this case, the in-grid solar-to-electrical energy conversion system is small photovoltaic power plant, which was constructed by the Center for Renewable Energy and Power Quality from Faculty of Technical Sciences (FTS). Equivalent circuit diagram of photovoltaic cell is described which was used to develop the simulation model of modules. Possible types and topologies of inverters are also described. The photovoltaic power plant is described briefly, because it is necessary to understand the simulation model. The result of simulation is an electricity annual production by the power plant. These results were compared with the real values, while its get a good overlap. The paper also presents the modern modeling methods developed at Faculty of Technical Sciences in the Laboratory for RES systems.

Numerical Investigation of Thermal Flow Field of Air-Cooled Condensers for Yongshou Plant

2012 ◽  
Vol 248 ◽  
pp. 391-394
Author(s):  
Wen Zhou Yan ◽  
Wan Li Zhao ◽  
Qiu Yan Li
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Speed ◽  
Power Plant ◽  
Flow Field ◽  
Wind Direction ◽  
Rotational Speed ◽  
Power Plants ◽  
Thermal Flow ◽  
Air Cooled Condensers

By using the computational fluid dynamics code, FLUENT, Numerically simulation is investigated for Youngshou power plant. Under the constant ambient temperature, the effects of different wind speed and wind direction on the thermal flow field are qualitatively considered. It was found that when considering about the existing and normally operating power plants, the thermal flow field is more sensitive to wind direction and wind speed. Based on the above results, three improved measures such as: increasing the wind-wall height and accelerating the rotational speed of the fans near the edge of the ACC platform and lengthen or widen the platform are developed to effectively improving the thermal flow field, and enhanced the heat dispersal of ACC.

Solar Chimney Power Plant - A Review on Latest Technological Advances for Performance Enhancement

2021 ◽  
Vol 9 (VI) ◽  
pp. 2434-2443
Author(s):  
Sreelekha Arun
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Performance Enhancement ◽  
Mechanical Energy ◽  
Technological Advancement ◽  
Solar Chimney ◽  
Air Turbine ◽  
Power Generation Technology ◽  
Solar Chimney Power Plant ◽  
Generation Technology

The energy consumption on global scale is continuously increasing, resulting in rapid use of energy resources available. Solar chimney power generation technology hence began to get growing attention as its basic model needs no depleting resources like fossil fuels for its functioning but only uses sunlight and air as a medium. It takes the advantage of the chimney effect and the temperature difference in the collector that produces negative pressure to cause the airflow in the system, converting solar energy into mechanical energy in order to drive the air turbine generator situated at the base of the chimney. Solar Chimney Power Plant (SCPP) brings together the solar thermal technology, thermal storage technology, chimney technology and air turbine power generation technology. However, studies have shown that even if the chimney is as high as 1000 m, the efficiency achievable is only around 3%. Hence, this review paper intents to put together the new technological advancement that aims to improve the efficiency of SCPP.

scholarly journals Feasibility study of power generation using a turbine mounted in aircraft wing

2018 ◽  
Vol 7 (2-1) ◽  
pp. 433
Author(s):  
K. Sri Vamsi Krishna ◽  
Shiva Prasad ◽  
R. Sabari Vihar ◽  
K. Babitha ◽  
K Veeranjaneyulu ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Power Systems ◽  
Free Stream ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Aircraft Wing ◽  
Aerodynamic Efficiency ◽  
Turbulent Reynolds Number ◽  
Main Motive ◽  
Emergency Power

The main objective of this study is to increase the aerodynamic efficiency of turbine mounted novel wing. The main motive behind this work is to reduce the drag by attaining the positive velocity gradient and generate power by converting the stagnation pressure which also acts as emergency power source. By using the energy source of free stream air, Mechanical energy is converted into electrical energy. The obtained power is presented in terms of voltage generated at various angles of attack with different Reynolds number. Experimental analysis is carried out for NACA4415 airfoil at various angles with respect to free stream ranging from 0deg to 30deg from laminar to turbulent Reynolds number. The results were obtained using the research tunnel at IARE aerodynamic facility center. The aerodynamic advantage of this design in terms of voltage is 9.5 V at 35m/s which can be utilized for the aircraft on board power systems.

scholarly journals Triboelectric nanogenerators (TENG): Factors affecting its efficiency and applications

2021 ◽  
Vol 34 (2) ◽  
pp. 157-172
Author(s):  
Deepak Anand ◽  
Singh Sambyal ◽  
Rakesh Vaid
Keyword(s):  
Large Scale ◽  
Review Paper ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Wearable Electronics ◽  
Factors Affecting ◽  
Electrostatic Induction ◽  
Triboelectric Nanogenerators ◽  
Human Motions ◽  
Great Scope

The demand for energy is increasing tremendously with modernization of the technology and requires new sources of renewable energy. The triboelectric nanogenerators (TENG) are capable of harvesting ambient energy and converting it into electricity with the process of triboelectrification and electrostatic-induction. TENG can convert mechanical energy available in the form of vibrations, rotation, wind and human motions etc., into electrical energy there by developing a great scope for scavenging large scale energy. In this review paper, we have discussed various modes of operation of TENG along with the various factors contributing towards its efficiency and applications in wearable electronics.

Sign in / Sign up

Export Citation Format

Share Document