scholarly journals Total Variance Approach on Commercial Vehicle Handling Dynamics

2021 ◽  
Author(s):  
Yaohua Guo ◽  
Jinquan Ding
Keyword(s):  
Optimization Design ◽  
Commercial Vehicle ◽  
Damping Ratio ◽  
Total Variance ◽  
Design Parameters ◽  
Slip Angle ◽  
Commercial Vehicles ◽  
Vehicle Handling ◽  
Lateral Forces ◽  
Variance Approach

The suspension roll motion can produce roll steer, which are functions of roll angle, thus producing extra lateral forces. This paper develops the total variance approach to analyze the effect of suspension roll on commercial vehicle handling dynamics. The side-slip angle unified transfer function, reaction time, transition time, damping ratio and total variance are introduced with the effect of suspension. The vehicle designers could use this approach to get optimization design parameters of vehicle without numerical calculation. For the two-axle commercial vehicles, the total variance approach is useful and could serve as an important tool for evaluating the effect of vehicle suspension roll on commercial vehicle dynamics.

Parameter study and optimization design of a hat oblique tunnel portal

2021 ◽  
pp. 095440972110140
Author(s):  
Zijian Guo ◽  
Tanghong Liu ◽  
Wenhui Li ◽  
Yutao Xia
Keyword(s):  
High Speed ◽  
Optimization Design ◽  
Pareto Front ◽  
Optimization Problem ◽  
Optimization Method ◽  
Design Parameters ◽  
Parameter Study ◽  
Buffer Structure ◽  
Tunnel Entrance ◽  
The Ideal

The present work focuses on the aerodynamic problems resulting from a high-speed train (HST) passing through a tunnel. Numerical simulations were employed to obtain the numerical results, and they were verified by a moving-model test. Two responses, [Formula: see text] (coefficient of the peak-to-peak pressure of a single fluctuation) and[Formula: see text] (pressure value of micro-pressure wave), were studied with regard to the three building parameters of the portal-hat buffer structure of the tunnel entrance and exit. The MOPSO (multi-objective particle swarm optimization) method was employed to solve the optimization problem in order to find the minimum [Formula: see text] and[Formula: see text]. Results showed that the effects of the three design parameters on [Formula: see text] were not monotonous, and the influences of[Formula: see text] (the oblique angle of the portal) and [Formula: see text] (the height of the hat structure) were more significant than that of[Formula: see text] (the angle between the vertical line of the portal and the hat). Monotonically decreasing responses were found in [Formula: see text] for [Formula: see text] and[Formula: see text]. The Pareto front of [Formula: see text] and[Formula: see text]was obtained. The ideal single-objective optimums for each response located at the ends of the Pareto front had values of 1.0560 for [Formula: see text] and 101.8 Pa for[Formula: see text].

scholarly journals Multi-Objective Optimisation of Tyre and Suspension Parameters during Cornering for Different Road Roughness Profiles

2021 ◽  
Vol 11 (13) ◽  
pp. 5934
Author(s):  
Georgios Papaioannou ◽  
Jenny Jerrelind ◽  
Lars Drugge
Keyword(s):  
Optimal Solution ◽  
Design Parameters ◽  
Road Vehicles ◽  
Propulsion Systems ◽  
Vehicle Handling ◽  
Optimum Parameters ◽  
Trade Offs ◽  
Road Roughness ◽  
Control Technologies ◽  
Tyre Wear

Effective emission control technologies and novel propulsion systems have been developed for road vehicles, decreasing exhaust particle emissions. However, work has to be done on non-exhaust traffic related sources such as tyre–road interaction and tyre wear. Given that both are inevitable in road vehicles, efforts for assessing and minimising tyre wear should be considered. The amount of tyre wear is because of internal (tyre structure, manufacturing, etc.) and external (suspension configuration, speed, road surface, etc.) factors. In this work, the emphasis is on the optimisation of such parameters for minimising tyre wear, but also enhancing occupant’s comfort and improving vehicle handling. In addition to the search for the optimum parameters, the optimisation is also used as a tool to identify and highlight potential trade-offs between the objectives and the various design parameters. Hence, initially, the tyre design (based on some chosen tyre parameters) is optimised with regards to the above-mentioned objectives, for a vehicle while cornering over both Class A and B road roughness profiles. Afterwards, an optimal solution is sought between the Pareto alternatives provided by the two road cases, in order for the tyre wear levels to be less affected under different road profiles. Therefore, it is required that the tyre parameters are as close possible and that they provide similar tyre wear in both road cases. Then, the identified tyre design is adopted and the optimum suspension design is sought for the two road cases for both passive and semi-active suspension types. From the results, significant conclusions regarding how tyre wear behaves with regards to passenger comfort and vehicle handling are extracted, while the results illustrate where the optimum suspension and tyre parameters have converged trying to compromise among the above objectives under different road types and how suspension types, passive and semi-active, could compromise among all of them more optimally.

scholarly journals A Two-Round Optimization Design Method for Aerostatic Spindles Considering the Fluid–Structure Interaction Effect

2021 ◽  
Vol 11 (7) ◽  
pp. 3017
Author(s):  
Qiang Gao ◽  
Siyu Gao ◽  
Lihua Lu ◽  
Min Zhu ◽  
Feihu Zhang
Keyword(s):  
Optimal Design ◽  
Optimization Design ◽  
Design Method ◽  
Fluid Structure Interaction ◽  
Design Procedure ◽  
Design Parameters ◽  
Geometrical Parameters ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Aerostatic Spindle

The fluid–structure interaction (FSI) effect has a significant impact on the static and dynamic performance of aerostatic spindles, which should be fully considered when developing a new product. To enhance the overall performance of aerostatic spindles, a two-round optimization design method for aerostatic spindles considering the FSI effect is proposed in this article. An aerostatic spindle is optimized to elaborate the design procedure of the proposed method. In the first-round design, the geometrical parameters of the aerostatic bearing were optimized to improve its stiffness. Then, the key structural dimension of the aerostatic spindle is optimized in the second-round design to improve the natural frequency of the spindle. Finally, optimal design parameters are acquired and experimentally verified. This research guides the optimal design of aerostatic spindles considering the FSI effect.

Multi-objective optimization of squirrel cage fan for range hood based on Kriging model

2021 ◽  
pp. 095440622199586
Author(s):  
Qianhao Xiao ◽  
Jun Wang ◽  
Boyan Jiang ◽  
Weigang Yang ◽  
Xiaopei Yang
Keyword(s):  
Flow Rate ◽  
Optimization Design ◽  
Volume Flow Rate ◽  
Kriging Model ◽  
Volume Flow ◽  
Design Parameters ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Squirrel Cage

In view of the multi-objective optimization design of the squirrel cage fan for the range hood, a blade parameterization method based on the quadratic non-uniform B-spline (NUBS) determined by four control points was proposed to control the outlet angle, chord length and maximum camber of the blade. Morris-Mitchell criteria were used to obtain the optimal Latin hypercube sample based on the evolutionary operation, and different subsets of sample numbers were created to study the influence of sample numbers on the multi-objective optimization results. The Kriging model, which can accurately reflect the response relationship between design variables and optimization objectives, was established. The second-generation Non-dominated Sorting Genetic algorithm (NSGA-II) was used to optimize the volume flow rate at the best efficiency point (BEP) and the maximum volume flow rate point (MVP). The results show that the design parameters corresponding to the optimization results under different sample numbers are not the same, and the fluctuation range of the optimal design parameters is related to the influence of the design parameters on the optimization objectives. Compared with the prototype, the optimized impeller increases the radial velocity of the impeller outlet, reduces the flow loss in the volute, and increases the diffusion capacity, which improves the volume flow rate, and efficiency of the range hood system under multiple working conditions.

The Biomimetic Shark Skin Optimization Design Method for Improving Lubrication Effect of Engineering Surface

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
Yan Lu ◽  
Meng Hua ◽  
Zuomin Liu
Keyword(s):  
Coefficient Of Friction ◽  
Optimization Design ◽  
Design Method ◽  
Theory Model ◽  
Tribological Performance ◽  
Design Parameters ◽  
Width Ratio ◽  
Textured Surface ◽  
Shark Skin ◽  
Biomimetic Surface

Nature has long been an important source of inspiration for mankind to develop artificial ways to mimic the remarkable properties of biological systems. In this work, a new method was explored to fabricate a biomimetic engineering surface comprising both the shark-skin, the shark body denticle, and rib morphology. It can help reduce water resistance and the friction contact area as well as accommodate lubricant. The lubrication theory model was established to predict the effect of geometric parameters of a biomimetic surface on tribological performance. The model has been proved to be feasible to predict tribological performance by the experimental results. The model was then used to investigate the effect of the grid textured surface on frictional performance of different geometries. The investigation was aimed at providing a rule for deriving the design parameters of a biomimetic surface with good lubrication characteristics. Results suggest that: (i) the increase in depression width ratio Λ decreases its corresponding coefficient of friction, and (ii) the small coefficient of friction is achievable when Λ is beyond 0.45. Superposition of depth ratio Γ and angle's couple under the condition of Λ < 0.45 affects the value of friction coefficient. It shows the decrease in angle decreases with the increase in dimension depth Γ.

Research on commercial vehicle sound quality objective evaluation

2021 ◽  
Vol 263 (2) ◽  
pp. 4526-4531
Author(s):  
Kun Qian ◽  
Zhichao Hou ◽  
Ruixue Liu ◽  
Dengke Sun ◽  
Rongkang Luo
Keyword(s):  
Evaluation Method ◽  
Commercial Vehicle ◽  
Objective Evaluation ◽  
Sound Quality ◽  
Subjective Perception ◽  
Commercial Vehicles ◽  
Comfort Evaluation ◽  
Quality Design ◽  
Increasing Demand ◽  
And Control

With the increasing demand of users for the acoustical comfort of commercial vehicles, the sound quality has become one of the important indicators of comfort evaluation. The research focuses on the objective evaluation method of the subjective perception of the sound quality in commercial vehicle. The interior noises of commercial vehicle with an inline six diesel engine are measured. The five psychoacoustic parameters (loudness, roughness, sharpness, fluctuation strength, tonality and articulation index) are applied to the evaluation and analysis of the interior noises of the commercial vehicle. Using psychoacoustic parameters to evaluate the noises in commercial vehicle, it is of great significance for the analysis and control of the noises in commercial vehicle. The research results provide a theoretical basis for guiding the sound quality design and development of commercial vehicles.

Optimal Design of Vibration Absorber Systems Supported by Elastic Base

1991 ◽  
Author(s):  
Hashem Ashrafiuon
Keyword(s):  
Dynamic Models ◽  
Damping Ratio ◽  
Equations Of Motion ◽  
Elastic Base ◽  
Design Parameters ◽  
Primary System ◽  
Vibration Absorbers ◽  
Equivalent Damping ◽  
System Equations ◽  
Different Levels

Abstract This paper presents the effect of foundation flexibility on the optimum design of vibration absorbers. Flexibility of the base is incorporated into the absorber system equations of motion through an equivalent damping ratio and stiffness value in the direction of motion at the connection point. The optimum values of the uncoupled natural frequency and damping ratio of the absorber are determined over a range of excitation frequencies and the primary system damping ratio. The design parameters are computed and compared for the rigid, static, and dynamic models of the base as well as different levels of base flexibility.

OPTIMIZATION DESIGN OF ALU FOAM-FILLED S-SHAPE SQUARE TUBE UNDER AXIAL DYNAMIC LOADING

2020 ◽  
Vol 40 (04) ◽  
Author(s):  
NGUYEN VAN SY ◽  
NGUYEN THANH TAM
Keyword(s):  
Energy Absorption ◽  
Optimization Design ◽  
Optimal Designs ◽  
Design Parameters ◽  
Aluminum Foams ◽  
Response Surface Models ◽  
Element Simulation ◽  
Crushing Force ◽  
Surface Models ◽  
Foam Filled

This paper presents finite element simulation of the crash behavior and the energy absorption characteristics of S-shape square tubes which were fully or partially filled with aluminum foams. Base on the numerical results, it is found that, the density, the length of the filled foam and the thickness of tube directly affect the specific energy absorption (SEA) and peak crushing force (PCF) of the S-shape tubes. In this paper, the multi-objective particle swarm optimization (MOPSO) algorithm is employed to seek for optimal designs for the partial foam-filled S-shape tubes (PFSTs) and the full foam-filled S-shape tubes (FFSTs) with various design parameters such as the density, the length of filled foam and the thickness of tube, where response surface models are established to formulation SEA and PCF. The optimization results showed the energy absorption capability per unit mass of the PFSTs is more powerful than that of the FFSTs while the PCF constrained under the same level.

Development of a Pedestrian Collision Warning System Integrated Into Windscreen Pillars

2018 ◽  
Author(s):  
D. V. Zeziulin ◽  
D. Y. Tyugin ◽  
A. V. Tumasov ◽  
A. M. Groshev ◽  
D. M. Porubov
Keyword(s):  
Commercial Vehicle ◽  
Warning System ◽  
Recognition System ◽  
Traffic Situation ◽  
Structural Elements ◽  
Commercial Vehicles ◽  
Warning Signals ◽  
Collision Warning ◽  
Video Cameras ◽  
Experimental Researches

In Russia, 36% [1] of all accidents are a collision with a pedestrian. Vehicle structural elements limit visibility to drivers and do not allow fully assessing the traffic situation, forming blind zones. It especially applies to commercial vehicles with large dimensions. The system allowing to expand visibility of the car due to use of displays in windscreen pillars is presented in this article. It is proposed to use the pedestrian recognition system integrated into the windscreen pillars based on neural networks. The system allows to detect and estimate distance to the objects and to give warning signals about possible collision. It consists of an on-board computer, video cameras and output devices. Interior elements of a commercial vehicle were developed and installed. External side mirrors were replaced with video cameras. The exterior elements were designed and installed. Further there were carried out experimental researches of the system.

Optimization Design of Agricultural Fans Based on Skewed-Swept Blade Technology

2019 ◽  
Vol 35 (2) ◽  
pp. 249-258
Author(s):  
Tao Ding ◽  
Lumeng Fang ◽  
Ji-Qin Ni ◽  
Zhengxiang Shi ◽  
Baoming Li ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Energy Efficiency ◽  
Optimization Design ◽  
Control Parameter ◽  
Rapid Development ◽  
Performance Testing ◽  
Design Parameters ◽  
Leakage Flow ◽  
Blade Design ◽  
Direction Control

Abstract.With the rapid development of modern agriculture facilities, agricultural fans have been widely used due to their low pressure and large airflow characteristics. However, existing agricultural fans have large flow losses and low energy efficiencies. To increase the airflow and energy efficiency of these fans, optimization designs based on skewed and swept blades were carried out. First, a “DDZ” agricultural fan (a leaf model agricultural fan commonly used in China) was chosen as the archetype fan. Its performance curves and flow field distribution were obtained by performance testing and numerical simulation. Second, the stack lines of the skewed blade and swept blade were designed based on the original blade, 3 skewed blade parameters (skewed angle a, x direction control parameter kx, and y direction control parameter ky), and 3 swept blade design parameters (swept angle ß, z direction control parameter kz, and r direction control parameter kr). Finally, the optimal skewed blade design parameters (a = 16.8°, kx = 1.65, and ky = 0.5) and optimal swept blade design parameters (ß = 10.6°, kz = -0.33, and kr =0.6) were obtained using numerical simulations and orthogonal testing, which is a response surface method. The numerical simulation results showed that the airflow and energy efficiency ratios of the optimal skewed blade fan were increased by 4.3% and 20.5%, and those of the optimal swept blade fan were increased by 4.5% and 15.4%, respectively, in comparison with those of the original fan. The flow fields showed that the optimal skewed blade mainly reduced the radial flow at the blade root and the leakage flow. The optimal swept blade mainly reduced the leakage flow by changing the distribution of the static pressure on the blade surfaces. Keywords: Agricultural fan, Skewed-Swept blade, Numerical simulation, Optimization.

Sign in / Sign up

Export Citation Format

Share Document