scholarly journals Features of lyophilization of a nanoliposomal drug

Author(s):  
V. G. Pushkar ◽  
K. A. Rotov ◽  
I. V. Novitskaya ◽  
E. A. Snatenkov

The conditions of lyophilization of nanoliposomes with encapsulated gentamicin (liposomal gentamicin) were studied. A mode of its safe lyophilization was suggested. A program for eliminating adverse factors was developed. It includes smooth increase of temperature from -70°C (freezing temperature) to room temperature (22±2)°C and gradual reduction of vacuum from 30 to 10 Pa without jumps and drops. The characteristics of the labile nanoliposomal drugs were not lost. The suggested program consisted of 10 steps allowing computer control to attain a slow and uniform increase in the temperature of the frozen product. The precise control of pressure in the chamber was provided by a system of automatic regulation of vacuum supplied with the equipment. After the rehydration the lyophilized preparations completely restored their original shape and properties.

2021 ◽  
Vol 33 (7) ◽  
pp. 2387-2397
Author(s):  
Alasdair A. M. Brown ◽  
Parth Vashishtha ◽  
Thomas J. N. Hooper ◽  
Yan Fong Ng ◽  
Gautam V. Nutan ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Saurabh Dixit ◽  
Nihar Ranjan Sahoo ◽  
Abhishek Mall ◽  
Anshuman Kumar

AbstractMid-infrared (IR) spectral region is of immense importance for astronomy, medical diagnosis, security and imaging due to the existence of the vibrational modes of many important molecules in this spectral range. Therefore, there is a particular interest in miniaturization and integration of IR optical components. To this end, 2D van der Waals (vdW) crystals have shown great potential owing to their ease of integration with other optoelectronic platforms and room temperature operation. Recently, 2D vdW crystals of $$\alpha$$ α -$$\hbox {MoO}_{3}$$ MoO 3 and $$\alpha$$ α -$$\hbox {V}_2 \hbox {O}_5$$ V 2 O 5 have been shown to possess the unique phenomenon of natural in-plane biaxial hyperbolicity in the mid-infrared frequency regime at room temperature. Here, we report a unique application of this in-plane hyperbolicity for designing highly efficient, lithography free and extremely subwavelength mid-IR photonic devices for polarization engineering. In particular, we show the possibility of a significant reduction in the device footprint while maintaining an enormous extinction ratio from $$\alpha$$ α -$$\hbox {MoO}_{3}$$ MoO 3 and $$\alpha$$ α -$$\hbox {V}_2$$ V 2 $$\hbox {O}_5$$ O 5 based mid-IR polarizers. Furthermore, we investigate the application of sub-wavelength thin films of these vdW crystals towards engineering the polarization state of incident mid-IR light via precise control of polarization rotation, ellipticity and relative phase. We explain our results using natural in-plane hyperbolic anisotropy of $$\alpha$$ α -$$\hbox {MoO}_{3}$$ MoO 3 and $$\alpha$$ α -$$\hbox {V}_2$$ V 2 $$\hbox {O}_5$$ O 5 via both analytical and full-wave electromagnetic simulations. This work provides a lithography free alternative for miniaturized mid-infrared photonic devices using the hyperbolic anisotropy of $$\alpha$$ α -$$\hbox {MoO}_{3}$$ MoO 3 and $$\alpha$$ α -$$\hbox {V}_2$$ V 2 $$\hbox {O}_5$$ O 5 .


1921 ◽  
Vol 34 (3) ◽  
pp. 259-270 ◽  
Author(s):  
H. W. Graybill

In observations on the development of the ova of Heterakis papillosa in cultures, it was found that they failed to develop at a temperature ranging from 2.5–8°C., but developed slowly at a temperature of 11.5–13.5°C. The minimum temperature for development seems to lie between 8° and 11.5–13.5°C. At temperatures ranging in various cultures from 18–29°C. ova developed to their final stage in 7 to 12 days. Undeveloped ova subjected to a freezing temperature for a period of 4 days were viable at the end of that time. Fully developed ones remained alive when exposed out of doors for a period of 7 days at a temperature ranging from 5–62°F. Undeveloped ova survived desiccation at room temperature for a period of 16 days, but not for 41 days. Fully developed eggs were alive after desiccation for 18 days, but not after 49 days. In another instance they were no longer viable after 10 days. Embryos within ova kept in physiological salt solution at room temperature survived during a period of a little over 12 months. Fully developed ova kept in soil outdoors under circumstances approaching natural conditions contained living embryos after a period of 8 months. From a study of a series of artificially infested chickens killed at short intervals it appears that the ova of Heterakis hatch in the small intestine and the larvæ pass by way of the small and large intestines to the ceca where they undergo development to maturity. Larvæ found in the mucosa of the ceca were not in an encysted condition. Feeding of numerous artificially incubated ova may lead to a light infestation, the cause of which has not been definitely determined. A period of 57 days was required for larvæ to reach maturity in a host. The entire cycle from egg to adult requires a minimum time of about 64 days. A brief study of the growth and development of larvæ within the host has been made. No evidence was found of a migration through the tissues. A few penetrate into the mucosa of the ceca.


2013 ◽  
Vol 2013 (CICMT) ◽  
pp. 000014-000018 ◽  
Author(s):  
M. Osada ◽  
T. Sasaki

We present a novel procedure for ceramic nanocoating using oxide nanosheet as a building block. A variety of oxide nanosheets (such as Ti1−δO2, MnO2 and perovsites) were synthesized by delaminating appropriate layered precursors into their molecular single sheets. These nanosheets are exceptionally rich in both structural diversity and electronic properties, with potential applications including conductors, semiconductors, insulators, and ferromagnets. Another attractive aspect is that nanosheets can be organized into various nanoarchitectures by applying solution-based synthetic techniques involving electrostatic layer-by-layer assembly and Langmuir-Blodgett deposition. It is even possible to tailor superlattice assemblies, incorporating into the nanosheet galleries with a wide range of materials such as organic molecules, polymers, and inorganic/metal nanoparticles. Sophisticated functionalities or paper-like devices can be designed through the selection of nanosheets and combining materials, and precise control over their arrangement at the molecular scale.


2012 ◽  
Vol 2012 (1) ◽  
pp. 000410-000413
Author(s):  
David J Rasmussen

Microelectronics used in automotive applications have grown considerably in the last few years with more high tech electronics controlling more functions in automobiles. In an effort to have more precise control and to reduce vehicle weight manufacturers are integrating more functions into smaller packages. Many of these packages are embedded in molded plastic. This causes challenges when it comes to wirebonding these devices. They often cannot be heated to traditional Gold Ball Thermosonic wirebonding temperatures of 120 – 150C. However, using a heated capillary to bond the parts which remain at room temperature simplifies the process considerably. Alternatives such as pre-heating the parts in an oven and complex hot gas handler systems are not required. With a resistive wire coil heater surrounding a standard (or long capillary for deep access) sufficient heat can be provided to the wire bond site for a strong and reliable interconnect. The bonding surface can be any material used in gold ball bonding: aluminum bond pads on die, plated contacts, ceramic substrates or plated copper traces on PCBs. This paper will show that this heated tool process has been successfully utilized with 1mil Au wire and many of the standard die and substrate materials with little impact on process parameters.


Minerals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 172
Author(s):  
Mamert Mbonimpa ◽  
Parrein Kwizera ◽  
Tikou Belem

When cemented paste backfill (CPB) is used to fill underground stopes opened in permafrost, depending on the distance from the permafrost wall, the curing temperature within the CPB matrix decreases progressively over time until equilibrium with the permafrost is reached (after several years). In this study, the influence of declining curing temperature (above freezing temperature) on the evolution of the unconfined compressive strength (UCS) of CPB over 28 days’ curing is investigated. CPB mixtures were prepared with a high early (HE) cement and a blend of 80% slag and 20% General Use cement (S-GU) at 5% and 3% contents and cured at room temperature in a humidity chamber and under decreasing temperatures in a temperature-controlled chamber. Results indicate that UCS is higher for CPB cured at room temperature than under declining temperatures. UCS increases progressively from the stope wall toward the inside of the CPB mass. Under declines in curing temperature, HE cement provides better short-term compressive strength than does S-GU binder. In addition, the gradual decline in temperature does not appear to affect the fact that the higher the binder proportion, the greater the strength development. Therefore, UCS is higher for samples prepared with 5% than 3% HE cement. Findings are discussed in terms of practical applications.


2013 ◽  
Vol 582 ◽  
pp. 210-213 ◽  
Author(s):  
Junichi Hamagami ◽  
Ryo Araki ◽  
Shohei Onimaru ◽  
G. Kawamura ◽  
Atsunori Matsuda

We reported that titania ceramic coating loaded with palladium catalyst worked as an optical hydrogen gas sensor at room temperature. The palladium metal of this sensor worked as a catalyst not only for room-temperature operation but also for high selectivity to hydrogen gas. Precise control of metal/ceramic interface between the titania and the palladium was very important in order to improve the sensor performance such as sensitivity, response time, recovery time. Influence of a difference in palladium-catalyst loading method (photodeposition and sputtering) on the optical hydrogen gas sensing properties for the titania-based sensor was investigated. It was found that the catalytic loading process significantly affected the optical hydrogen characteristics of the titania-based coating.


2022 ◽  
pp. 152660282110687
Author(s):  
Giorgio A. Medranda ◽  
Brian J. Forrestal ◽  
Brian C. Case ◽  
Ron Waksman ◽  
Nelson L. Bernardo

Purpose: Nickel-titanium (nitinol) alloys possess a special set of properties that allow for a wide range of applications. Specifically, the transformation temperature for self-expanding nitinol peripheral stents allows for easy crimping at or below room temperature and reformation at body temperature becoming superelastic. Case Report: We report the case of an elderly man with iliac stenting 1 month prior, who presented several weeks after recovering from coronavirus disease 2019 with recurrent anterior-wall ST-elevation myocardial infarction. This was complicated by deformation and infolding of the previously implanted nitinol self-expanding stent in his right common iliac artery (CIA). Understanding nitinol’s specific properties, we proceeded with rapid injections of iced saline to cool the nitinol stent to its transformation temperature while nudging the distal end of the stent with a partially inflated balloon. This maneuver softened the nitinol stent, allowing us to “unfold” and reappose it against the wall of the right CIA, resulting in successful restoration of the original shape of the nitinol self-expanding stent. Conclusion: This represents the first reported case describing treatment of an infolded nitinol self-expanding peripheral stent by exploiting the transformation temperature of nitinol using iced cold saline to successfully restore the stent’s original shape and structure.


Sign in / Sign up

Export Citation Format

Share Document