scholarly journals Pengujian Mekanik dan Biodegradabilitas Plastik Biodegradable Berbahan Baku Pati Bonggol Pisang dengan Penambahan Kitosan, Sorbitol, dan Minyak Kayu Manis

2019 ◽  
Vol 4 (2) ◽  
Author(s):  
Dewi Oetary ◽  
Syaubari Syaubari ◽  
Medyan Riza
Keyword(s):  
Tensile Strength ◽  
Environmental Pollution ◽  
Water Absorption ◽  
Raw Materials ◽  
Chitosan Nanoparticles ◽  
Biodegradable Plastic ◽  
Cinnamon Oil ◽  
Complete Degradation ◽  
Materials Used ◽  
Break Water

<p>Biodegradable plastic is an alternative to conventional plastic which has been very difficult to degrade and causes environmental pollution. Biodegradable plastic raw materials come from plants or plant wastes, so they are easily degraded by the environment and the utilization of waste becomes more efficient. The general objective of this study is to obtain the characteristics of plastics that meet the standards by varying the concentration of the materials used. This study used Kepok banana hump starch with variations in the concentration of chitosan, sorbitol, and cinnamon oil. The variable used is the ratio of weight of starch and water (1: 5). The concentration of chitosan nanoparticles was 0.25%, 0.5%, and 0.75%, sorbitol concentrations were 2 ml, 4 ml, and 6 ml, and the concentration of cinnamon was 0%, 0.5%, and 1%. Tests carried out are tensile strength, elongation of break, water absorption, and biodegradability. The best tensile strength results are 19.6 MPa, the best elongation is 47.69%, the highest water absorption is 53.77% and the lowest is 22.63%, and the complete degradation takes the longest time of 77 days.</p>

scholarly journals Pembuatan film plastik biodegradable dari limbah kulit kopi dengan penambahan kitosan/gliserol

2020 ◽  
Vol 4 (1) ◽  
pp. 38
Author(s):  
Edwin Rizki Safitra ◽  
Idra Herlina
Keyword(s):  
Tensile Strength ◽  
Raw Materials ◽  
Biodegradable Plastic ◽  
Optimum Conditions ◽  
Plastic Films ◽  
Waste Glycerol ◽  
Chitosan Concentration ◽  
Long Time ◽  
Standard Value ◽  
Materials Used

Biodegradable plastic production has been developed for a long time by researchers. Data from Ministry of Industry in 2017 stated Indonesia's plastic production reached 3.9 million tons/ year. In this study, the raw materials used came from untapped waste, namely coffee skin, biodiesel-waste glycerol and shrimp-shells chitosan. In this research, biodegradable plastic films have been produced with the addition of glycerol and coffee skin waste with chitosan concentration variations of 0, 2, 4, 6, and 8%. After the optimum conditions were obtained by comparing the elongation and tensile strength values, then the variations in coffee skin waste were added with a weight of 0, 2, 4, 6, and 8 g. Tensile strength and elongation values with variations of chitosan were 0.2-1.87 MPa and 0.22-0.15%, respectively. Whereas the variation of tensile strength and elongation coffee skins were 1.8-0.27 MPa and 0.14-0.2%, respectively. The optimum conditions for producing biodegradable plastic films were obtained with variations of chitosan 4% and 2 g coffee skin with tensile strength and elongation values of 0.98 MPa and 0.16%. The tensile strength and elongation data produced from biodegradable plastic was still below the standard value of commercial plastic or synthetic plastic (HDPE) with values of tensile strength and elongation of 28.64 MPa and 6.5186% respectively.

Quality Technological Properties of Foundry Exhaust Dust as Alternative Ceramic Coating Raw Materials

2015 ◽  
Vol 1088 ◽  
pp. 395-398
Author(s):  
Luiz Oliveira Veriano dalla Valentina ◽  
Marilena Valadares Folgueras ◽  
Wanessa Rejane Knop ◽  
Maria Cristina Pacheco do Nascimento ◽  
Glaucia Aparecida Prates
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Ceramic Coating ◽  
Raw Materials ◽  
Linear Shrinkage ◽  
Inert Atmosphere ◽  
Technological Properties ◽  
Foundry Industry ◽  
Ceramic Manufacturing ◽  
Materials Used

The work evaluates the possibility of the use the exhauster powder generated in the foundry process in ceramic mass atomized semigre type. The raw materials used were semi-stoneware kind atomized powder used on the coating ceramic manufacturing and dust exhaust byproduct supplied by a foundry industry both from brazilian industries . Tests were conducted using a heating rate of 10o.C / min and oxidant and / or inert atmosphere. Specimens contained different amounts of byproduct to the extent of 30% by mass, in order to verify the maximum addition of byproduct and were used in order to analyze the technological properties evaluation (water absorption linear shrinkage, bulk density). at the temperature of 1100 ° C showed higher difference between the results obtained and 1200o C this difference decreased.

Microstructural Analysis of Petroleum Waste Containing Ceramic Tile

2008 ◽  
Vol 591-593 ◽  
pp. 845-848 ◽  
Author(s):  
Bruno C.A. Pinheiro ◽  
J.N.F. Holanda
Keyword(s):  
Water Absorption ◽  
Microstructural Evolution ◽  
Ceramic Tile ◽  
Sintered Density ◽  
Raw Materials ◽  
Microstructural Analysis ◽  
Linear Shrinkage ◽  
Ceramic Tiles ◽  
Petroleum Waste ◽  
Materials Used

In this work is done a study on the sintered microstructure of ceramic tile paste incorporated with petroleum waste. The raw materials used were kaolin, sodic feldspar, quartz and petroleum waste. The ceramic tiles containing up to 5 wt% petroleum waste were prepared by uniaxial pressing and sintered at 1200°C. The microstructural evolution was examined by SEM. In addition, water absorption, linear shrinkage, and sintered density were determined. The results showed that the microstructure of the ceramic tiles is influenced by the added petroleum waste.

Comparison of Mechanical Properties of Fly Ash Artificial Geopolymer Aggregates with Natural Aggregate

2015 ◽  
Vol 754-755 ◽  
pp. 290-295 ◽  
Author(s):  
Alida Abdullah ◽  
Ku Amirrul Rahman Ku Yin ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Kamarudin Hussin ◽  
Mien Van Tran
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Specific Gravity ◽  
Water Absorption ◽  
Raw Materials ◽  
Construction Materials ◽  
High Water ◽  
Natural Aggregate ◽  
Materials Used ◽  
The Impact

This study was conducted to compare the mechanical properties of fly ash artificial geopolymer aggregates with natural aggregate (rock) in term of its impact strength, specific gravity and water absorption.The raw materials used were fly ash, sodium hydroxide, sodium silicate and natural aggregate. After the artificial geopolymer aggregate has been produced, its water absorption, specific gravity and aggregate impact test has been done. All results obtained were compared to natural aggregate. The result shows that the fly ash geopolymer aggregate are lighter than natural aggregate in term of its specific gravity. The impact value for fly ash artificial geopolymer aggregate slightly high compared to natural aggregate while it has high water absorption value compared to natural aggregate. As conclusion, the fly ash artificial geopolymer aggregate can be used as one of the construction materials in concrete as an alternative for coarse aggregate besides natural aggregate with more lightweight properties.

scholarly journals Potensi Pemanfaatan Serat Selulosa sebagai Material Bahan Baku dalam Sintesis Filter Udara Non-Woven sesuai Standar TAPPI T 205

2020 ◽  
Vol 10 (2) ◽  
pp. 37-42
Author(s):  
Irwan Suriaman ◽  
Mardiyati ◽  
Jooned Hendrarsakti ◽  
Ari Darmawan Pasek
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Raw Materials ◽  
Natural Fibers ◽  
Morphological Characteristics ◽  
Sem Analysis ◽  
Raw Material ◽  
Ramie Fiber ◽  
Tropical Country ◽  
Materials Used

Industry 4.0 era materials used by entrepreneurs should be recycled, environmentally friendly, renewable with less chemical content. Indonesia as a tropical country has a large land area with the potential to produce the largest natural fiber in the world. One opportunity that can be applied to the utilization of natural fibers in air filters that currently use dominant materials is synthetic fibers. natural fiber has the advantage because it does not contain toxic chemicals, local raw materials, and is easily produced. This research will analyze the mechanical and morphological characteristics of biological fibers that have great potential as pre-filter raw material. Analysis of mechanical properties through tensile strength testing for single fibers and morphological analysis through scanning electron microscopy (SEM). Tensile testing was the results are; palm oil has a tensile strength of 620 MPa; 998 MPa and 213 MPa flax coconut fiber. For the morphological test results from SEM analysis for ramie fiber, it looks solid without fiber holes; The fibers appear to be many small fibers bound to one another while coir fibers have many pore holes in one observed fiber.

Characterization and Properties of Lampang Kaolinite Clay for Standard Clay

2019 ◽  
Vol 798 ◽  
pp. 248-253
Author(s):  
Soravich Mulinta ◽  
Sakdiphon Thiansem
Keyword(s):  
Water Absorption ◽  
Bending Strength ◽  
Silicon Oxide ◽  
Raw Materials ◽  
Raw Material ◽  
Chemical Components ◽  
Kaolin Clay ◽  
Kaolinite Clay ◽  
X Ray ◽  
Materials Used

The aim of this study was to study and characterize the properties of raw material for standard clay, Lampang province. The raw materials used in the study are from local sources. They are Lampang kaolin clay (WC-1) and Lampang kaolin residual (WC-2). The characterization of raw material was analyzed by particle analyzer, X-ray fluorescence (XRF) and X-ray diffraction (XRD). The mixing ratio of standard clay as an addition Lampang kaolin clay 50-90% and Lampang kaolin residual 10-50% on physical-mechanical properties of standard clay. The properties of standard clay after firing at temperature at 1200°C were studied. The shrinkage, water absorption and bending strength of standard clay were tested. The results showed that the chemical components of 60%lampang kaolinite clay and 40% Lampang kaolin residual included of large amount of 67.47wt% Silicon oxide and 20.92wt%Aluminum oxide. The physical properties of standard clay had a shrinkage of 11.2%, water absorption of 1.9 % and bending strength of 659 kg/cm2. The standard clay produced fulfilled the requirements of Thai industrial standard (TIS 485-2542).

SIFAT FISIK DAN MEKANIK PAPAN PARTIKEL DARI LIMBAH PLASTIK JENIS HDPE (High Density Polyetylene) DAN RANTING/CABANG KARET (Hevea brasiliensis Muell.Arg)

2011 ◽  
Vol 3 (1) ◽  
pp. 7
Author(s):  
Sari Mirad Noor
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Raw Materials ◽  
Urea Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Plastic Waste ◽  
High Density ◽  
Different Types ◽  
Materials Used ◽  
The Impact

The need of log increace rapidly, mean while forest product decrease, so efficiency on wood process should be done wisely, in the other hand plastic waste is uncompossed material, become an environmental problems. This research aims to determine the impact of particles of type HDPE plastic wastes and twigs/branches of rubber on some physical and mechanical properties of wood. Physical properties have been tested for water content, density, thickness, and water absorption. Although mechanical properties tests were tough Broken/Module of Rufture (MOR) and the preservation of architecture/modulus of elasticity (MOE).     The raw materials used are polyethylene of high density of waste plastic and rubber adhesive urea formaldehyde branch branch. Experimental design used the randomized Completely Design (RCD) 5 x 4, in which each treatment became much like 5 times replicated).The treatment used is the diversity of the composition of the waste of plastic of different types of polyethylene of high density provides a significant effect on the content of water, water absorption, the density and the development of thickness. With regard to the persistence and the fracture of the arch determination not to give a significant effect.Keywords: physical and mechanical properties, particle board, HDPE plastic waste, branch/twig of  rubber.

Study on the Preparation Process of Corn Straw-Pumice Composite Concrete

2013 ◽  
Vol 357-360 ◽  
pp. 955-958
Author(s):  
Jian Suo Ma ◽  
Jing Sun ◽  
Huan Qin Cai ◽  
Run Shan Bai
Keyword(s):  
Water Absorption ◽  
Building Materials ◽  
Raw Materials ◽  
Northern China ◽  
Preparation Process ◽  
Corn Straw ◽  
Molding Process ◽  
Main Crop ◽  
Large Water ◽  
Materials Used

In order to prepare energy saving and environmental protection building materials, a new kind of concrete was made by the combination of corn stalks which is the main crop in northern China, natural pumice resources and cement. Corn stalks and pumice are all lightweight material with open pores and large water absorption; therefore they must be pretreated before preparing concrete by blocking holes to reduce the amount of grout. The raw materials used in the experiments are lightweight materials; it is advisable to adopt the pressure vibration molding process to reduce aggregate stratification.

scholarly journals POTENSI KERTAS SEBAGAI BAHAN BAKU PAPER ROPES (POTENTIAL OF PAPER AS THE RAW MATERIAL FOR PAPER ROPES)

2017 ◽  
Vol 7 (02) ◽  
pp. 91
Author(s):  
Mungki Septian Romas ◽  
Ikhwan Pramuaji ◽  
Lies Indriati ◽  
Sonny Kurnia Wirawan
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Water Absorption ◽  
Water Resistance ◽  
Raw Materials ◽  
Raw Material ◽  
Paper Surface ◽  
Water Barrier ◽  
Reduced Water

One of the raw materials furniture common in Indonesia is rattan. Because of the availability of local rattan is very limited so that it is necessary to find alternative raw materials that can be used to substitute the rattan. Paper ropes made from spinning paper, is one of alternative that can be utilized. Paper ropes making from various spinning papers have been studied. Some types of paper were used in this experiment. The spinning papers were characterized and treated to modify its surface properties especially to increase their water resistance. Paper ropes making were done by using the twisting machine and then the physical properties of paper ropes resulted were tested. The results showed that paper surface treatment increased tensile strength, and reduced water absorption and porosity of treated papers. The use of water barrier chemicals and adhesive are effective in increasing water resistance of paper surface. Decreased water absorption and porosity are  20% - 43% and 30% - 98%, respectively. Based on this result, paper ropes is potential to become an alternative raw material for furniture.  ABSTRAKSalah satu bahan baku furnitur umum di Indonesia adalah rotan. Karena ketersediaan rotan lokal sangat terbatas sehingga diperlukan untuk mencari bahan baku alternatif yang dapat digunakan untuk menggantikan rotan. Paper ropes yang terbuat dari spinning paper, merupakan salah satu alternatif yang dapat dimanfaatkan. Pembuatan paper ropes dari berbagai jenis spinning paper telah dipelajari pada penelitian ini. Beberapa jenis kertas digunakan dalam percobaan ini. Spinning paper dikarakterisasi dan diperlakukan khusus untuk memodifikasi sifat permukaannya terutama untuk meningkatkan ketahanan airnya. Pembuatan paper ropes dilakukan dengan menggunakan mesin pemilin dan pengujian sifat fisik paper ropes telah dilakukan. Hasil penelitian menunjukkan bahwa perlakuan khusus permukaan kertas meningkatkan kekuatan tarik, dan mengurangi penyerapan air dan porositas. Penggunaan bahan kimia water barrier dan adhesif cukup efektif dalam meningkatkan ketahanan air permukaan kertas.  Penurunan penyerapan air dan porositas masing-masing sebesar 20% - 43% dan 30% - 98%. Berdasarkan hasil ini, paper ropes memiliki potensi sebagai bahan bahan baku alternatif untuk furnitur.

PAPAN PARTIKEL DARI CAMPURAN LIMBAH ROTAN DAN PENYULINGAN KULIT KAYU GEMOR (Alseodaphne spp)

2014 ◽  
Vol 6 (1) ◽  
pp. 41
Author(s):  
Budi Tri Cahyana
Keyword(s):  
Tensile Strength ◽  
Modulus Of Elasticity ◽  
Raw Materials ◽  
Modulus Of Rupture ◽  
Particle Board ◽  
Materials Used

Utilization of rattan waste and gemor bark (Alseodaphne spp) distillation  for particle board had been carried out. The aim of this research was to know physical mechanical particle board from rattan waste mixed with gemor bark distillation. The raw materials used were cut-rattan waste of 2 cm and gemor bark distillation mashed in 16 mesh. The adhesive used were starch and PVAC. Composition variety of the mixture of rattan waste and gemor bark distillation particle were 50%: 50%, 60%: 40%, 70%: 30% and 5% adhesive. The results showed that highest average of modulus of rupture (26,62 kg/cm2) was obtained in 60% : 40% comparison of rattan waste and gemor bark distillation with starch adhesive (a2b1) and the density was 0.75 gr/cm3. The highest average of modulus of elasticity (633,76 kg/cm2) was in composition of 60%: 40% with PVAc adhesive (a2b2) and the density was 0,71 gr/cm3. The highest average of tensile strength (3,15 kg/cm2) was obtained in composition of 60%: 40% with starch adhesive (a2b1) and the density was  0.75 gr/cm3.Keywords: rattan waste, gemor bark distillation, particle board

Sign in / Sign up

Export Citation Format

Share Document