scholarly journals Tectonics of Volcanogenic Massive Sulphide (VMS) Deposits at Flores Back Arc Basin: A Review

2020 ◽  
Vol 35 (2) ◽  
Author(s):  
Noor CD Aryanto ◽  
Hananto Kurnio
Keyword(s):  
Gold Mineralization ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Hydrothermal Activity ◽  
Basaltic Lava ◽  
Sulphide Deposit ◽  
Volcanogenic Massive Sulphide ◽  
Submarine Ridge ◽  
Vms Deposits ◽  
Back Arc

The bathymetry, petrology, marine magnetic, and seismic-SBP data have identified the northwest-southeast direction submarine ridge that shows hydrothermal activity. This activity occurred through Mount Baruna Komba, Abang Komba, and Ibu Komba. The volcanic rocks are andesite basaltic lava flows, tuff, and pumice. The andesite basaltic lava shows porphyritic, intergranular, intersertal to glomeroporphyritic textures. The rock composes anhedral minerals of k-feldspar, plagioclase, and pyroxene. These minerals present in small-sized, short prismatic dispersed in very fine groundmass minerals or glasses. Most of the volcanic rocks have experienced various degrees of alteration. The k-feldspar and plagioclase are most dominantly transformed into sericite, clay mineral, carbonate, epidote and oxide mineral, opaque mineral, and secondary plagioclase through the albitization process, while pyroxene replaced by chlorite. Other minerals are biotite and quartz, and base metals are present Cu, Zn, Ag, As, Pb, and gold. Mineralization categorizes as the phyllic zone, sub-prophylithic zone, and phyllic-potassic zone that formed at a temperature range of 250-400oC. The submarine hydrothermal alteration in the Komba Ridge is associated with a volcanogenic sulphide deposit controlled by crust thinning due to the crust rifts in the back-arc tectonic setting.

Geochemical and isotopic (Nd, O) data from Ordovician felsic plutonic and volcanic rocks of the Miramichi Highlands: petrogenetic and metallogenic implications for the Bathurst Mining Camp

1998 ◽  
Vol 35 (3) ◽  
pp. 237-252 ◽  
Author(s):  
Joseph B Whalen ◽  
Neil Rogers ◽  
Cees R van Staal ◽  
Frederick J Longstaffe ◽  
George A Jenner ◽  
...  
Keyword(s):  
Volcanic Rocks ◽  
Middle Ordovician ◽  
Basaltic Rocks ◽  
Volcanogenic Massive Sulphide ◽  
Vms Deposits ◽  
Bathurst Mining Camp ◽  
Felsic Volcanic ◽  
Back Arc ◽  
T Values ◽  
Felsic Volcanic Rocks

Middle Ordovician felsic magmatism contemporaneous with Bathurst Camp Pb-Zn volcanogenic massive sulphide(VMS) deposits consists of strongly altered volcanic to subvolcanic rocks, belonging to the Tetagouche Group, and relativelyunaltered granitoid plutons, which are divided into northern, central, and southern groups within the Miramichi Highlands.Calc-alkalic felsic volcanic rocks and northern plus central plutons have EpsilonNd(T) values ranging from -8.2 to -1.9 and -4.0 to +0.3, respectively. They exhibit within-plate-type volcanic and transitional I- to A-type granite geochemical characteristics.Granitoid rock Delta18O values range from +8.0 to +10.1‰. Published granitoid rock Pb isotopic compositions overlapunpublished galena data from Bathurst VMS deposits. Field, geochemical, and isotopic evidence indicate that these volcanicand granitoids rocks are consanguineous and mainly derived from Proterozoic orolder infracrustal sources. Alkalic felsic volcanic rocks, and associated alkaline basaltic rocks, are more juvenile (EpsilonNd(T) = +3.2 to +4.2) and were possibly derivedfrom slightly enriched mantle sources. Southern plutons exhibit continental arc-type features. The felsic magmatism and VMS deposits likely formed in an Okinawa-type back-arc basin developed from rifting the Early Ordovician Popelogan continentalarc, of which the southern plutons are remnants. Correlations between pluton groups and volcanic formations indicate that felsic magmatism was erupted through and onto the Miramichi Group. As most felsic volcanic formations lack plutonicequivalents, the Tetagouche Group probably does not represent disrupted slices of an originally conformable stratigraphic section. This supports a model in which thrust slices juxtapose remnants of volcanic centres erupted at different locationswithin a back-arc basin.

Age, chemistry, and tectonic setting of Miramichi terrane (Early Paleozoic) volcanic rocks, eastern and east-central Maine, USA

2021 ◽  
Vol 57 ◽  
pp. 239-273
Author(s):  
Allan Ludman ◽  
Christopher McFarlane ◽  
Amber T.H. Whittaker
Keyword(s):  
New Brunswick ◽  
Subduction Zone ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Calc Alkaline ◽  
East Central ◽  
Arc Volcanism ◽  
Middle Ordovician ◽  
Volcanic Suite ◽  
Back Arc

Volcanic rocks in the Miramichi inlier in Maine occur in two areas separated by the Bottle Lake plutonic complex: the Danforth segment (Stetson Mountain Formation) north of the complex and Greenfield segment to the south (Olamon Stream Formation). Both suites are dominantly pyroclastic, with abundant andesite, dacite, and rhyolite tuffs and subordinate lavas, breccias, and agglomerates. Rare basaltic tuffs and a small area of basaltic tuffs, agglomerates, and lavas are restricted to the Greenfield segment. U–Pb zircon geochronology dates Greenfield segment volcanism at ca. 469 Ma, the Floian–Dapingian boundary between the Lower and Middle Ordovician. Chemical analyses reveal a calc-alkaline suite erupted in a continental volcanic arc, either the Meductic or earliest Balmoral phase of Popelogan arc activity. The Maine Miramichi volcanic rocks are most likely correlative with the Meductic Group volcanic suite in west-central New Brunswick. Orogen-parallel lithologic and chemical variations from New Brunswick to east-central Maine may result from eruptions at different volcanic centers. The bimodal Poplar Mountain volcanic suite at the Maine–New Brunswick border is 10–20 myr younger than the Miramichi volcanic rocks and more likely an early phase of back-arc basin rifting than a late-stage Meductic phase event. Coeval calc-alkaline arc volcanism in the Miramichi, Weeksboro–Lunksoos Lake, and Munsungun Cambrian–Ordovician inliers in Maine is not consistent with tectonic models involving northwestward migration of arc volcanism. This >150 km span cannot be explained by a single east-facing subduction zone, suggesting more than one subduction zone/arc complex in the region.

Geochemistry and U/Pb geochronology of the Williams Brook area, Tobique-Chaleur zone, New Brunswick: stratigraphic and geotectonic setting of gold mineralization

2021 ◽  
Author(s):  
Dennis Sánchez-Mora ◽  
Christopher R.M. McFarlane ◽  
James A Walker ◽  
David R. Lentz
Keyword(s):  
New Brunswick ◽  
Gold Mineralization ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Crustal Contamination ◽  
Volcanic Belt ◽  
Temporal Variations ◽  
Lower Percentage ◽  
Oblique Convergence ◽  
Felsic Volcanic

Gold mineralization at Williams Brook in northern New Brunswick is hosted within the Siluro-Devonian, bimodal, volcano-sedimentary rocks of the Tobique-Chaleur Zone (Wapske Formation). Gold mineralization occurs in two styles: 1) as disseminations (refractory gold) in rhyolite, and 2) in cross-cutting quartz veins (free gold). Dating of the felsic volcanic host rocks by in situ LA-ICP-MS zircon U-Pb geochronology returned ages of 422 ± 3, 409 ± 2, 408 ± 3, 405 ± 2, 401 ± 9 Ma. Zr/Y of subvolcanic felsic intrusion (<8 for syn-mineralization and >8 for post-mineralization) suggests evolution from transitional to more alkalic affinities. Two mineralizing events are recognized; the first is a disseminated mineralization style formed at ~422–416 Ma and the second consists of quartz vein-hosted gold emplaced at 410–408 Ma. Felsic rocks from Williams Brook and elsewhere in the Tobique Group (i.e. Wapske, Costigan Mountain, and Benjamin formations), and the Coastal Volcanic Belt have similar Th/Nb ratios of ~0.1 to 1, reflecting similar levels of crustal contamination, and similar Nb and Y content, suggesting A-type affinities. These data indicate a similar environment of formation. Regionally, mafic rocks show similar within-plate continental signatures and an E-MORB mantle source that formed from partial melts of 10–30%. Mafic volcanic rocks from Williams Brook have a more alkaline affinity (based on Ti/V), and derivation from lower percentage partial melting (~5%). The chemical and temporal variations in the Williams Brook rocks suggest that they were erupted in an evolving transpressional tectonic setting during the oblique convergence of Gondwana and Laurentia.

Geology, geochronology, and fluid inclusion studies of the Xiaorequanzi volcanogenic massive sulphide Cu–Zn deposit in the East Tianshan Terrane, China

2020 ◽  
Vol 57 (12) ◽  
pp. 1392-1410 ◽  
Author(s):  
Xi-Heng He ◽  
Xiao-Hua Deng ◽  
Leon Bagas ◽  
Jing Zhang ◽  
Chao Li ◽  
...  
Keyword(s):  
Fluid Inclusion ◽  
Fluid Inclusions ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Massive Sulphide ◽  
Calc Alkaline ◽  
The North ◽  
Volcanogenic Massive Sulphide ◽  
Secondary Fluid ◽  
East Tianshan

The Xiaorequanzi Cu–Zn deposit is in the westernmost part of East Tianshan Terrane in northwestern China. The deposit is unique in the region being a volcanogenic massive sulphide (VMS) deposit located near a zone (or belt) containing giant late Paleozoic porphyry Cu deposits. Aiming to better understand the genesis of the mineral deposits in the terrane and their tectonic setting, we report our findings of detailed studies on fluid inclusion microthermometry, Re–Os dating of chalcopyrite from the massive ore, and U–Pb dating of zircons from the host volcanic rocks. There are two sulphide stages with early pyrite succeeded by chalcopyrite–sphalerite, which are hydrothermally overprinted and supergene enriched. The hydrothermal overprinting is characterised by quartz–sulphide veins crossed by carbonate-rich quartz veins. Quartz from the chalcopyrite–sphalerite stage is characterised by primary fluid inclusions containing H2O–NaCl(–CO2) and homogenise at 228–392 °C with a salinity of 2.2–13.3 wt.% NaCl equiv. Secondary fluid inclusions related to the hydrothermal overprinting homogenise at 170–205 °C with a salinity of 2.7–12.1 wt.% NaCl equiv. Fluid inclusions in the quartz–sulphide stage of the hydrothermal overprinting contain H2O–NaCl with homogenisation temperatures of 164–281 °C and salinities in ranging from 2.9 to 12.4 wt.% NaCl equiv. Fluid inclusion in the quartz–calcite stage contain H2O–NaCl with homogenisation temperatures of 122–204 °C with salinities of 1.4–12.4 wt.% NaCl equiv. These characteristics are like those of the secondary fluid inclusions in the VMS mineralisation. Combining these findings with H–O isotopic data from previous studies, we propose that the primary mineralising fluid is magmatic in origin. Tuff hosting the mineralisation yields a SHRIMP U–Pb zircon age of 352 ± 5 Ma, which is interpreted as the age of the tuff, and a porphyritic felsite dyke intruding the tuff yields a SHRIMP U–Pb zircon date of 345 ± 6 Ma, interpreted as the emplacement age of the dyke. Chalcopyrite from the main orebody at Xiaorequanzi yields a Re–Os isochron age of 336 ± 13 Ma with an initial 187Os/188Os ratio of 0.25 ± 0.55 (MSWD = 12). Given that the VMS deposit is a syngenetic deposit, we regard the upper ca. 349 Ma limit of the Re–Os date as the approximate age of the chalcopyrite. The three dates are the same within error, and the upper limit of the Re–Os date of ca. 349 is taken as the age of the volcanic, dyke, and mineralisation. The volcanic rocks around the Xiaorequanzi deposit have been previously classified as calc–alkaline to high-K calc–alkaline enriched in large-ion lithophile elements and depleted in high-field-strength elements, which are characteristics indicative of a forearc setting. It is suggested that VMS mineralisation formed in a forearc setting related to the north-directed subduction of the Palaeo-Kangguer or North Tianshan oceanic plates.

U–Pb ages, geochemistry, and tectonomagmatic history of the Cambro-Ordovician Annidale Group: a remnant of the Penobscot arc system in southern New Brunswick?1This article is one of a series of papers published in this CJES Special Issue: In honour of Ward Neale on the theme of Appalachian and Grenvillian geology.

2012 ◽  
Vol 49 (1) ◽  
pp. 166-188 ◽  
Author(s):  
Susan C. Johnson ◽  
Leslie R. Fyffe ◽  
Malcolm J. McLeod ◽  
Gregory R. Dunning
Keyword(s):  
New Brunswick ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Conclusive Evidence ◽  
The Past ◽  
Late Cambrian ◽  
Suprasubduction Zone ◽  
History Of ◽  
Group A ◽  
Back Arc

The Penobscot arc system of the northeastern Appalachians is an Early Cambrian to early Tremadocian (ca. 514–485 Ma) ensialic to ensimatic arc–back-arc complex that developed along the margin of the peri-Gondwanan microcontinent Ganderia. Remnants of this Paleozoic arc system are best preserved in the Exploits Subzone of central Newfoundland. Correlative rocks in southern New Brunswick are thought to occur in the ca. 514 Ma Mosquito Lake Road Formation of the Ellsworth Group and ca. 497–493 Ma Annidale Group; however in the past, the work that has been conducted on the latter has been of a preliminary nature. New data bearing on the age and tectonic setting of the Annidale Group provides more conclusive evidence for this correlation. The Annidale Group contains subalkaline, tholeiitic to transitional, basalts to basaltic andesites, picritic tuffs and calc-alkaline to tholeiitic felsic dome complexes that have geochemical signatures consistent with suprasubduction zone magmatism that was likely generated in a back-arc basin. New U–Pb ages establish that the Late Cambrian to Early Tremadocian Annidale Group and adjacent ca. 541 Ma volcanic rocks of the Belleisle Bay Group in the New River belt were affected by a period of younger magmatism ranging in age from ca. 479–467 Ma. This provides important constraints on the timing of tectonism in the area. A ca. 479 Ma age for the Stewarton Gabbro that stitches the faulted contact between the Annidale and Belleisle Bay groups, demonstrates that structural interleaving and juxtaposition occurred during early Tremadocian time, which closely coincides with the timing of obduction of Penobscottian back-arc ophiolites onto the Ganderian margin in Newfoundland.

Chronology of crustal growth and recycling in the Paleoproterozoic Amisk collage (Flin Flon Belt), Trans-Hudson Orogen, Canada

1999 ◽  
Vol 36 (11) ◽  
pp. 1807-1827 ◽  
Author(s):  
R A Stern ◽  
N Machado ◽  
E C Syme ◽  
S B Lucas ◽  
J David
Keyword(s):  
Upper Mantle ◽  
Tectonic Setting ◽  
Bulk Composition ◽  
Volcanic Rocks ◽  
Crust And Upper Mantle ◽  
Zircon Age ◽  
Magmatic Rocks ◽  
Main Period ◽  
Flin Flon ◽  
Back Arc

U-Pb zircon ages have been compiled for magmatic and sedimentary rocks from the low metamorphic grade portion of the Flin Flon greenstone belt, now recognized as a Paleoproterozoic tectonic collage. The "Amisk collage" formed in two major magmatic periods that were separated by an interval of intraoceanic accretionary tectonics. Pre-accretionary volcanic and plutonic rocks of arc and ocean-floor tectonic affinities have crystallization ages of 1.906-1.901 and 1.888-1.881 Ga; the earlier period was dominated by juvenile tholeiitic arc basalts and related back-arc-basin basalts, and the younger period by juvenile calc-alkaline volcanic rocks and turbidites. Intraoceanic accretion of the diverse tectono-stratigraphic assemblages may have commenced between 1.90 and 1.89 Ga, but the main period was 1.88-1.87 Ga. The post-accretionary period (1.876-1.838 Ga) was characterized by intrusion of juvenile calk-alkaline plutons generated by a successor arc that stitched the diverse pre-accretionary assemblages. Marine to subaerial volcaniclastic and epiclastic units were deposited in successor basins <=1.87 Ga (Schist-Wekusko suite), succeeded by alluvial-fluvial (Missi Group) to marine (Burntwood Group) sediments after 1.85 Ga. Despite the dominance of juvenile magmatic rocks within the collage, U-Pb zircon age and Nd-isotopic data show that older (>2.2-3.0 Ga) basement fragments were present throughout the development of the Amisk collage. An arc-back-arc system close to an Archean craton is proposed as the most likely tectonic setting during formation and accretion of the Amisk collage from 1.90 to 1.84 Ga. Subsequent continental collision during peak orogeny (1.84-1.81 Ga) is interpreted to have delaminated the lower crust and upper mantle of the collage, preferentially preserving crust of intermediate bulk composition.

scholarly journals Evidence for voluminous bimodal pyroclastic volcanism during rifting of a Paleoproterozoic arc at Snow Lake, Manitoba

2017 ◽  
Vol 54 (6) ◽  
pp. 654-676 ◽  
Author(s):  
Kate E. Rubingh ◽  
Harold L. Gibson ◽  
Bruno Lafrance
Keyword(s):  
Massive Sulfide ◽  
Hydrothermal Activity ◽  
Stratigraphic Correlation ◽  
Pyroclastic Deposits ◽  
Volcanic Event ◽  
Vms Deposits ◽  
Flin Flon ◽  
Arc Setting ◽  
Gold Producer ◽  
Back Arc

The thrust-bounded McLeod Road – Birch Lake (MB) sequence occurs within the Paleoproterozoic Snow Lake arc (SLA) assemblage of the Flin Flon belt. Stratigraphic correlation of volcanic strata of the MB sequence with strata of the thrust-bounded Chisel sequence indicates that distinctive, submarine, eruption-fed, pyroclastic flow deposits are more extensive and voluminous than previously recognized (>10 km3). These voluminous felsic pyroclastic deposits define a distinct magmatic and explosive volcanic event during bimodal volcanism that accompanied rifting of the SLA. The felsic pyroclastic deposits define the remnants of a basin, or of nested basins, that formed during arc rifting and subsidence, and their eruption immediately preceded formation of the Chisel sequence volcanogenic massive sulfide (VMS) deposits. Although the Chisel sequence ore interval is recognized in the MB sequence, the lack of VMS-related alteration indicates that VMS hydrothermal activity was restricted to the Chisel portion of the basin. However, the MB sequence is host to the younger Snow Lake gold mine, a 1.4M oz (43 699 kg) gold producer. The overlying MORB-like Birch Lake basalts, if conformable with the MB sequence, may represent a progression from a rifted-arc to a back-arc setting. However, if they are thrust fault bounded, then they may represent the initial phases of arc-rifting, prior to the voluminous felsic pyroclastic eruptions. Correlation and integrity of stratigraphy between the thrust-bounded MB and SLA sequences indicates that the bounding thrust faults, which developed during accretionary processes, have less regional significance than previously interpreted.

Tectonic setting and regional correlation of Ordovician metavolcanic rocks of the Casco Bay Group, Maine: evidence from trace element and isotope geochemistry

2004 ◽  
Vol 141 (2) ◽  
pp. 125-140 ◽  
Author(s):  
DAVID P. WEST ◽  
RAYMOND A. COISH ◽  
PAUL B. TOMASCAK
Keyword(s):  
Trace Element ◽  
Continental Crust ◽  
Isotope Geochemistry ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Mafic Magma ◽  
Ocean Basin ◽  
Middle Ordovician ◽  
South Central ◽  
Back Arc

Ordovician metamorphic rocks of the Casco Bay Group are exposed in an approximately 170 km long NE-trending belt (Liberty-Orrington belt) in southern and south-central Maine. Geochemical analysis of rocks within the Spring Point Formation (469±3 Ma) of the Casco Bay Group indicate that it is an assemblage of metamorphosed bimodal volcanic rocks. The mafic rocks (originally basalts) have trace element and Nd isotopic characteristics consistent with derivation from a mantle source enriched by a crustal and/or subduction component. The felsic rocks (originally rhyolites and dacites) were likely generated through partial melting of continental crust in response to intrusion of the mafic magma. Relatively low initial εNd values for both the mafic (−1.3 to +0.6) and felsic (−4.1 to −3.8) rocks suggest interactions with Gander zone continental crust and support a correlation between the Casco Bay Group and the Bathurst Supergroup in the Miramichi belt of New Brunswick. This correlation suggests that elements of the Early to Middle Ordovician Tetagouche-Exploits back-arc basin can be traced well into southern Maine. A possible tectonic model for the evolution of the Casco Bay Group involves the initiation of arc volcanism in Early Ordovician time along the Gander continental margin on the eastern side of the Iapetus Ocean basin. Slab rollback and trenchward migration of arc magmatism initiated crustal thinning and rifting of the volcanic arc around 470 Ma and resulted in the eruption of the Spring Point volcanic rocks in a back-arc tectonic setting.

scholarly journals Subseafloor sulphide deposit formed by pumice replacement mineralisation

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Tatsuo Nozaki ◽  
◽  
Toshiro Nagase ◽  
Yutaro Takaya ◽  
Toru Yamasaki ◽  
...  
Keyword(s):  
Okinawa Trough ◽  
Precious Metals ◽  
Massive Sulphide ◽  
Void Space ◽  
Sulphide Deposit ◽  
Framboidal Pyrite ◽  
Volcanogenic Massive Sulphide ◽  
Vms Deposits ◽  
Hemipelagic Sediment ◽  
Drill Holes

AbstractSeafloor massive sulphide (SMS) deposits, modern analogues of volcanogenic massive sulphide (VMS) deposits on land, represent future resources of base and precious metals. Studies of VMS deposits have proposed two emplacement mechanisms for SMS deposits: exhalative deposition on the seafloor and mineral and void space replacement beneath the seafloor. The details of the latter mechanism are poorly characterised in detail, despite its potentially significant role in global metal cycling throughout Earth’s history, because in-situ studies require costly drilling campaigns to sample SMS deposits. Here, we interpret petrographic, geochemical and geophysical data from drill holes in a modern SMS deposit and demonstrate that it formed via subseafloor replacement of pumice. Samples from the sulphide body and overlying sediment at the Hakurei Site, Izena Hole, middle Okinawa Trough indicate that sulphides initially formed as aggregates of framboidal pyrite and matured into colloform and euhedral pyrite, which were replaced by chalcopyrite, sphalerite and galena. The initial framboidal pyrite is closely associated with altered material derived from pumice, and alternating layers of pumiceous and hemipelagic sediments functioned as a factory of sulphide mineralisation. We infer that anhydrite-rich layers within the hemipelagic sediment forced hydrothermal fluids to flow laterally, controlling precipitation of a sulphide body extending hundreds of meters.

scholarly journals Oligocene-Pleistocene Paleogeography within Banyumas Basin and implication to petroleum potential

2018 ◽  
Vol 1 ◽  
pp. 00006 ◽  
Author(s):  
Eko Bayu Purwasatriya ◽  
Sugeng Sapto Surjono ◽  
Donatus Hendra Amijaya
Keyword(s):  
Depositional Environment ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Source Rocks ◽  
Petroleum Potential ◽  
Magmatic Arc ◽  
The North ◽  
Potential Source ◽  
Back Arc ◽  
Exploration Activity

<p>This study attempts to reconstruct paleogeography of Banyumas Basin in association with magmatic arc evolution and its implication to petroleum potential. Based on the volcanic rocks distribution, their association and relatives age, there are three alignments of a magmatic arc, that are: (1) Oligo-Miocene arc in the south (2) Mio-Pliocene arc in the middle (3) Plio-Pleistocene arc in the north. The consequences of the magmatic arc movement were tectonic setting changing during Oligocene to Pleistocene, as well as their paleogeography. During Oligo-Miocene where magmatic arc existed in the southern part, the Banyumas tectonic setting was a back-arc basin. This tectonic setting was changing to intra-arc basin during Mio-Pliocene and subsequently to fore-arc basin since Plio-Pleistocene until today. Back-arc basin is the most suitable paleogeography to create a depositional environment for potential source rocks. Exploration activity to prove the existence of source rocks during Oligo-Miocene is needed to reveal petroleum potential in Banyumas Basin.<br></p>

Sign in / Sign up

Export Citation Format

Share Document