scholarly journals USE OF MODIFIED REAGENTS SOLUTIONS WHEN PREPARING DRINKING WATER

2021 ◽  
Vol 6 (166) ◽  
pp. 141-145
Author(s):  
S. Dushkin ◽  
T. Shevchenko ◽  
O. Galkina
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Suspended Solids ◽  
Aluminum Sulfate ◽  
Technology Development ◽  
Environmental Safety ◽  
Aluminum Salts ◽  
The Cost ◽  
Clarified Water

Currently, attention is paid to the intensification of the process of natural and wastewater treatment, improvement of technology, development of new effective methods of intensification of water treatment. This will simplify the existing technology of water treatment, reduce labor-intensive processes of preparation and dosing of reagents, reduce the cost of operating treatment plants, increase their productivity, improve quality and reduce the cost of treated water. Treatment of water with a modified coagulant solution allows to increase the hydraulic size of the coagulated suspension. The strongest effect of the modified coagulant solution has on the hydraulic suspension size of 0.2 mm/s and less, i.e. the smallest and the suspension, which is difficult to remove, which creates conditions for more intensive sedimentation in settling tanks and improve the quality of water clarification and fed to fast filters. It has been experimentally determined that the treatment of water with a modified solution of aluminum sulfate coagulant should be performed when the content of suspended solids in the clarified water is up to 100–150 mg / dm3. The color of the clarified water during treatment with a modified solution of aluminum sulfate coagulant does not depend on the content of suspended solids and is 1.5-1.6 times lower than the color than when using a conventional coagulant solution. It is established that the use of a modified solution of aluminum sulfate coagulant in water purification can reduce the residual aluminum content in clarified water by an average of 50-60%. The results of researches of the modified solutions of reagents which are used at preparation of drinking water are presented. It is established that water treatment with a modified solution of aluminum sulfate coagulant allows to improve the quality of drinking water preparation by suspended solids, color, reduce the content of aluminum salts in the clarified water, thereby increasing the environmental safety of drinking water.

scholarly journals Use of Aloe vera as an Organic Coagulant for Improving Drinking Water Quality

Water ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2024
Author(s):  
Abderrezzaq Benalia ◽  
Kerroum Derbal ◽  
Amel Khalfaoui ◽  
Raouf Bouchareb ◽  
Antonio Panico ◽  
...  
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Suspended Solids ◽  
Aluminum Sulfate ◽  
Aloe Vera ◽  
Drinking Water Treatment ◽  
Water Turbidity ◽  
Turbidity Removal ◽  
Maximum Turbidity ◽  
Optimal Ph

The coagulation–flocculation–sedimentation process is widely used for removal of suspended solids and water turbidity reduction. The most common coagulants used to conduct this process are aluminum sulfate and ferric sulfate. In this paper, the use of Aloe vera as a natural-based coagulant for drinking water treatment was tested. The bio-coagulant was used in two different forms: powder as well as liquid; the latter was extracted with distilled water used as a solvent. The obtained results showed that the use of the natural coagulant (Aloe vera) in both powder (AV-Powder) and liquid (AV-H2O) forms reduced the water turbidity at natural pH by 28.23% and 87.84%, respectively. Moreover, it was found that the use of the two previous forms of bio-coagulant for drinking water treatment had no significant influence on the following three parameters: pH, alkalinity, and hardness. The study of the effect of pH on the process performance using Aloe vera as a bio-coagulant demonstrated that the maximum turbidity removal efficiency accounted for 53.53% and 88.23% using AV-Powder and AV-H2O, respectively, at optimal pH 6.

Study on the Micro-Polluted Water Treatment by GAC-UF

2010 ◽  
Vol 113-116 ◽  
pp. 2049-2052
Author(s):  
Jin Long Zuo
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Suspended Solids ◽  
Treatment Process ◽  
Drinking Water Treatment ◽  
Polluted Water ◽  
Total Removal ◽  
Water Treatment Process

Nowadays drinking water resource has been polluted, while the conventional treatment process cannot effectively remove polluted matters. In order to tackle this problem, the granular activated carbon (GAC) and ultrafiltration membrane (UF) were introduced into drinking water treatment process. The results revealed that when treat the micro-polluted water the effluent water quality of turbidity, permanganate index and color can reach 0.1NTU, 1.3mg/L-2.3mg/L and 5 degree respectively with GAC-UF process. And the total removal efficiency of turbidity, permanganate index and color can reach 98%-99%, 70%~75% and 60% respectively. The GAC can effectively remove organic matters, while the UF membrane can effectively remove suspended solids, colloids. The GAC-UF combined process can get a good water quality when treat the micro-polluted water.

Microbiological quality of residues from drinking water preparation

1995 ◽  
Vol 31 (5-6) ◽  
pp. 75-79 ◽  
Author(s):  
M. Würzer ◽  
A. Wiedenmann ◽  
K. Botzenhart
Keyword(s):  
Waste Water ◽  
Escherichia Coli ◽  
Pseudomonas Aeruginosa ◽  
Drinking Water ◽  
Water Treatment ◽  
Pathogenic Bacteria ◽  
Waste Water Treatment ◽  
Microbiological Quality ◽  
Detection Limits

In Germany the application of procedures such as flocculation and filtration in the preparation of drinking water results in the annual production of an estimated 500,000 t of sediments and sludges. Some of these residues have a potential for being reused, for example in agriculture, forestry, brickworks or waste water treatment. To assess the microbiological quality of residues from waterworks methods for the detection of enterobacteria, Escherichia coli, Salmonella, Pseudomonas aeruginosa, Legionella, poliovirus, Ascaris suis eggs and Cryptosporidium have been evaluated regarding their detection limits and were applied to various residues from German waterworks. Results show that sediments and sludges may contain pathogenic bacteria, viruses and protista. When residues from waterworks are intended to be reused in agriculture or forestry the microbiological quality should therefore be considered.

scholarly journals Designing The Improvement of SPAM UNS Water Dispenser Service Quality

2020 ◽  
Vol 19 (1) ◽  
pp. 22-29
Author(s):  
Yosua Natalianto ◽  
Eko Pujiyanto ◽  
Wahyudi Sutopo
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Service Quality ◽  
Drinking Water Treatment ◽  
Academic Community ◽  
Treatment System ◽  
Water Treatment System

SPAM (Sistem Pengolahan Air Minum or Drinking Water Treatment System) UNS was established in 2015 to meet the drinking water needs of the UNS academic community by providing 129 dispensers and water tap machines spread across buildings at UNS. A survey conducted by UNS students in 2017 showed that 54 % of students were not sure of the quality of UNS SPAM water. So the service quality questionnaire was distributed to 160 UNS students randomly and it was found that only 3 % of respondents stated that they used SPAM UNS water dispenser very often. Processing results shown the highest gap value is in the reliability dimension, with CTS namely cleanliness and flow of water. From the survey regarding the cleanliness and flow of the water carried out the DPMO value of the process was 332,589 (1, 930 sigma) . Recommendations for improvement are in the form of several SOPs to improve the cleanliness and quality of SPAM UNS water dispenser services.

scholarly journals Research on improving water quality using two experimental statistical methods

2018 ◽  
Vol 178 ◽  
pp. 08014
Author(s):  
Mihail Aurel Ţîţu ◽  
Andrei Victor Sandu ◽  
Costel Ceocea ◽  
Alina Bianca Pop ◽  
Ştefan Ţîţu ◽  
...  
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Treatment Process ◽  
Treatment Plant ◽  
Scientific Paper ◽  
Taguchi’S Method ◽  
Water Treatment Process ◽  
Experiment Method ◽  
Points Of View

This scientific paper addresses the importance of water treatment process until it becomes drinkable, studying the treatment process from different points of view that are considered to be relevant. The choice of this subject was motivated by the water consumption importance for the entire population, the scientific paper proposing to study in what way this water treatment process could be improved, using for analysis two methods of experimental statistical modeling, namely the Taguchi's method and the factorial experiment method. The purpose of this scientific paper was to identify the deficiencies of the water treatment process after it entered the treatment plant and analyze is carried out using the two mentioned methods above, were continued by finding optimization solutions for the process. These solutions are intended to avoid the situations in which the treatment plant may be unable to cover the required volume of drinking water and to ensure the quality of the drinking water supplied to consumers according to the legislation to date. The knowledge benefit of this research consists in the realization of the research intentions formulated and the practical applicability of the results.

scholarly journals Analytical quantification of electrochemical ferrates for drinking water treatments

2017 ◽  
Vol 95 (1) ◽  
pp. 105-112 ◽  
Author(s):  
Macarena A. Cataldo Hernández ◽  
Andrew May ◽  
Arman Bonakdapour ◽  
Madjid Mohseni ◽  
David P. Wilkinson
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Analytical Methods ◽  
Advantages And Disadvantages ◽  
Excellent Candidate ◽  
Colorimetric Measurements ◽  
Analytical Quantification ◽  
Time Required ◽  
The Cost ◽  
Water Treatments

Ferrate ions are a highly oxidizing and unstable species that are challenging to quantify and analyze. They are, however, becoming increasingly recognized as an excellent candidate for a number of applications such as for water treatment. A wider acceptance of ferrates requires an accurate assay of the produced ferrates. We report on four analytical methods (existing and new) for quantification of ferrates and discuss their advantages and disadvantages. These methods include titrimetric analysis and spectrometric techniques such as direct colorimetric measurements of ABTS or NaI colorimetric. In terms of accuracy, the cost, simplicity, and time required the modified indirect UV-Vis NaI method is shown to be the most effective of all of the four methods investigated.

scholarly journals Effect of Media Properties on Performance of Sand Filtration for Drain Water Treatment

2020 ◽  
Author(s):  
Khaled A. I. Ismail ◽  
Sayed I. A. Ismail ◽  
Ahmed S. El-Gendy ◽  
Tarek I. M. Sabry
Keyword(s):  
Activated Carbon ◽  
Water Treatment ◽  
Removal Efficiency ◽  
Pilot Plant ◽  
Suspended Solids ◽  
Low Cost ◽  
Infiltration Rate ◽  
Drain Water ◽  
Sand Filter

In an attempt to improve the quality of the agricultural drain in Egypt for its reuse again in the irrigation, low cost solution such as sand filter along with/ without other filtration media have been used in this research, As a result of that, pilot plant of sand filter mixed with other filtration media was tested for its ability to improve the sand performance in removing the suspended solids and organic matters from agricultural drain water of the Belbeis drain (in Sharkia governorate in Egypt). Only sand compared with sand with sponge and sand with Liyan Nanfang activated carbon (L.N.A.C) have been tested to find the optimum mixing sand/ medium ratio &optimum infiltration rate. The work has been done on four runs. It was found that sand mixed with sponge gave the best removal efficiency compared to that of the sand only and the sand mixed with L.N.A.C. The results presented that the concentration of CODt, CODsol and TSS was reduced from 125, 47 and 162 mg/l to 44, 34 and 28 mg/l respectively at optimum infiltration rate of 2 m3/m2/d for sand mixed with sponge.

scholarly journals Long-Term Drinking Water Quality Assessment Using Index and Multivariate Statistical Analysis for Three Water Treatment Plants of Erbil City, Iraq

2018 ◽  
Vol 2 (2) ◽  
pp. 39-48
Author(s):  
Hayder Mohammed Issa ◽  
Reem Ahmed Alrwai
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Water Supply ◽  
Drinking Water Treatment ◽  
Drinking Water Quality ◽  
Total Alkalinity ◽  
Total Hardness ◽  
Water Treatment Plants

Safe source of drinking water is always considered as an essential factor in water supply for cities and urban areas. As a part of this issue, drinking water quality is monitored via a useful scheme: developing drinking water quality index DWQI. DWQI is preferably used as it summarizes the whole physicochemical and bacteriological properties of a drinking water sample into a single and simple term. In this study, an evaluation was made for three drinking water treatment plants DWTPs named: Efraz 1, Efraz 2 and Efraz 3 that supply drinking water to Erbil City. The assessment was made by testing thirteen physicochemical and two bacteriological parameters during a long period of (2003 – 2017). It has been found that turbidity, electrical conductivity EC, total alkalinity, total hardness, total coliform and fecal coliform have more influence on drinking water quality. DWQI results showed that the quality of drinking water supplied by the three DWTPs in Erbil City fallen within good level. Except various occasional periods where the quality was varying from good to fair. The quality of the drinking water supply never reached the level of marginal or poor over the time investigated. The applied hierarchical clustering analysis HCA classifies the drinking water dataset into three major clusters, reflecting diverse sources of the physicochemical and bacteriological parameter: natural, agriculture and urban discharges.

scholarly journals SEMENTES DE Moringa oleífera Lam: EFICIÊNCIA NO USO DE COAGULANTE BIOLÓGICO NO TRATAMENTO DE ÁGUA COM TURBIDEZ, COMPARADO AO COAGULANTE QUÍMICO SULFATO DE ALUMÍNIO

2020 ◽  
Vol 9 (11) ◽  
pp. 1-18
Author(s):  
Maiara Luzia Grigoli OLIVIO ◽  
Elizângela Flávia Jacob ESTEVES ◽  
Dagmar Aparecida de Marco FERRO
Keyword(s):  
Water Treatment ◽  
Moringa Oleifera ◽  
Aluminum Sulfate ◽  
Low Cost ◽  
Turbid Water ◽  
Quality Of Water ◽  
Before And After ◽  
Natural Coagulants ◽  
Moringa Oleifera Lam

Comumente o sulfato de alumínio é o coagulante químico utilizado nas Estações de Tratamentos para a clarificação da água, embora produza um lodo tóxico de difícil deposição no ambiente. No entanto, os coagulantes naturais como sementes de Moringa oleífera Lam. têm demonstrado vantagens para tratamento em comparação aos químicos, pela simplicidade de uso e baixo custo. O estudo objetivou analisar a eficiência coagulante da semente de Moringa oleífera na clarificação de água com turbidez e comparar com os parâmetros do coagulante químico sulfato de alumínio. As amostras de água foram coletadas no Córrego Jacu Queimado e as sementes colhidas em um plantio da própria espécie. Foram realizados, em laboratório, etapas sequenciais do experimento: comparação da eficiência da semente verde e seca, determinação da concentração e tempo de exposição da semente à água, comparação de agitação manual e magnética entre elas e do coagulante biológico com o químico, sendo analisados os aspectos físico, químico e biológico antes e após a adição de ambos. Observou-se que apenas a semente seca realiza a clarificação da água em comparação com os resultados das análises da água clarificada com o sulfato, determinando-se que 5 sementes são eficazes para tratar 1 litro de água com turbidez de até 25,0 NTU, considerando-se mais relevante a agitação manual para o efeito de coagulação e o aguardo de 2 horas para o término da decantação. Conclui-se, que a semente de Moringa é um coagulante biológico que se apresenta como alternativa para o tratamento de água com turbidez, porém, ainda não é indicada para a potabilidade. É preciso dar continuidade ao tratamento em busca de processos que visam melhorar a qualidade da água para aproximar-se aos parâmetros aceitáveis para o consumo humano.   Moringa oleífera Lam SEEDS: EFFICIENT USE OF BIOLOGICAL COAGULANT FOR WATER TURBIDITY TREATMENT, COMPARED TO ALUMINUM SULFATE CHEMICAL COAGULANT   ABSTRACT Aluminum sulfate is a chemical coagulant commonly used at Water Treatment Plants for water clarification, although it produces a toxic sludge of difficult deposition in the environment. However, natural coagulants such as Moringa oleíferaLam seeds have evidenced the advantages for the treatment when compared to chemicals, due to either their simplicity in and low cost.  This research aims at reviewing the efficient use of   Moringa oleífera seeds as coagulants for turbid water clarification as well as comparing the parameters of aluminum sulfate chemical coagulants. The water samples were collected at Córrego Jacu Queimado and the seeds were harvested from a crop of its own species. Sequential steps were performed in the lab for this experiment: Comparison of green and dry seeds efficiency, concentration and time of exposition of the seed to water measurements, comparison of manual and magnetic stirring among them and among biological and chemical coagulants, being analyzed physical, chemical and biological aspects before and after adding both of them. It was observed that only the dry seed enables water clarification when comparing the analysis results to sulfate water clarification, it was ascertained that 5 seeds are efficient to treat a liter of 25,0 NTU turbidity in water, considering as more relevant manual stirring for coagulation effect after a two-hour rest for decantation completion. It was concluded that Moringa seed is a biological coagulant presented as an alternative for turbid water treatment, although it is not indicated for drinkability. Further treatment is necessary in order to keep searching for processes that target to improve the quality of water and meeting acceptable parameters for water consumption.   Keywords: Biological Coagulant. Chemical Coagulant. Efficiency. Water Clarification. Comparative Parameters.

Sign in / Sign up

Export Citation Format

Share Document