scholarly journals Useful Bioactive Substances from Wastes: Recovery of Trans-Resveratrol from Grapevine Stems

2016 ◽  
Vol 10 (1) ◽  
pp. 4-9 ◽  
Author(s):  
George Angelov ◽  
Lubomir Boyadzhiev ◽  
Silviya Georgieva
Keyword(s):  
Water Solubility ◽  
Pharmaceutical Preparations ◽  
Water Soluble ◽  
Raw Material ◽  
Bioactive Substances ◽  
Total Extract ◽  
Initial Extract ◽  
Efficient Extraction ◽  
Simple Extraction ◽  
The Many

The methods for producing natural resveratrol are of big interest because of the many health benefits of this substance and its increasing use in functional foods, food supplements and para-pharmaceutical preparations. Generally, resveratrol is extracted from different natural sources, most of them usually produced for consumption purposes (grapes, nuts). This paper presents a method for recovery of resveratrol from a widely available raw material - grapevine stems, a by-product of vine pruning. An efficient extraction-fractionation scheme is developed, based on shifting the phase equilibrium, by which more concentrated extracts of resveratrol are obtained. After a simple extraction, the initial extract is further separated into two fractions, containing either water or ethanol-soluble compounds. Using this approach, the resveratrol’s low water solubility helps isolate it from other water-soluble substances. The resulting product is almost ten times more concentrated in trans-resveratrol than the initial total extract. Additionally, a fraction containing water-soluble polyphenols is obtained, which could be used for water-based pharmaceutical and cosmetic preparations.

scholarly journals Modifications of Porphyrins and Hydroporphyrins for their Solubilization in Aqueous Media

2017 ◽  
Author(s):  
Michael Luciano ◽  
Christian Brückner
Keyword(s):  
Photodynamic Therapy ◽  
Water Solubility ◽  
Photoacoustic Imaging ◽  
Aqueous Media ◽  
Water Soluble ◽  
Chemical Modifications ◽  
Synthetic Sequence ◽  
Synthetic Chemist ◽  
The Many ◽  
As Solubility

The increasing popularity of porphyrins and hydroporphyrins for application in a variety of biomedical (photodynamic therapy, fluorescence tagging and imaging, photoacoustic imaging) and technical (chemosensing, catalysis, light harvesting) applications is also associated with the growing number of methodologies that enable their solubilization in aqueous media. Natively, the vast majority of synthetic porphyrinic compounds are not water-soluble. Moreover, any water-solubility imposes several restrictions on the synthetic chemist on when to install solubilizing groups in the synthetic sequence, and how to isolate and purify these compounds. This review summarizes the chemical modifications to render synthetic porphyrins water-soluble, with a focus on the work since 2000. Where available, practical data such as solubility, indicators for the degree of aggregation, and special notes for the practicioner are listed. We hope that this review will guide synthetic chemists through the many strategies known to make porphyrins and hydroporphyrins water soluble.

scholarly journals Preparation of water-soluble asphalt carbon dots and hyperchromic effect to Cr (VI)

2018 ◽  
Vol 238 ◽  
pp. 02007
Author(s):  
Lijuan Gao ◽  
Jia Sui ◽  
Xiaoqin Qiao ◽  
Chaoshuai Hu ◽  
Xuefei Zhao
Keyword(s):  
Carbon Dots ◽  
Water Solubility ◽  
Fluorescence Emission ◽  
Acid Precipitation ◽  
Water Soluble ◽  
Raw Material ◽  
Precipitation Method ◽  
Acid Oxidation ◽  
Excitation Wavelength ◽  
Uv Spectrum

Water-soluble asphalt carbon dots (W-CDs) was prepared from medium - temperature coal tar pitch as raw material, via mixed acid oxidation, alkali solubilization and acid precipitation method. It was observed that as-prepared W-CDs were irregular particles with good water dispersibility and the particle size was controlled by the pH of the acid precipitation solution by a polarizing microscope. Infrared spectroscopy confirmed that the surface of the W-CDs was functionalized by hydrophilic and color-promoting functional groups, which had good water solubility; the thermal weight loss proved to be good thermal stability below 200°C; the fluorescence spectrum proved that the fluorescence emission peak position of the carbon dots appears red shift with increase of excitation wavelength, with fluorescence conversion property, and its emission light intensity decreases, belonging to non-resonant fluorescence type of direct jump fluorescence; UV spectrum proves that the addition of W-CDs can be chromium (VI) CrO42- content The detection limit was increased from milligram to microgram; the molar absorptivity of CrO42- was increased by 4 times. The experimentally optimized W-CDs-ultraviolet-viscometry method for measuring CrO42- conditions: W-CDs to chromium ratio of 8:2, pH of 8, hexamethylenetetramine as a surfactant, and the solution was allowed to stand at room temperature for 45 min.

scholarly journals CONTROL OF RADIOACTIVE SAFETY AND QUALITY OF MEDICINAL VEGETABLE RAW MATERIALS OF THE GREATER BURDOCK (ARCTIUM LAPPA L.) ROOTS IN VORONEZH REGION

2019 ◽  
Vol 8 (1) ◽  
pp. 73-77
Author(s):  
N. A. Dyakova ◽  
A. I. Slivkin ◽  
S. P. Gaponov
Keyword(s):  
Raw Materials ◽  
Surrounding Medium ◽  
Correlation Coefficients ◽  
Water Soluble ◽  
Raw Material ◽  
Bioactive Substances ◽  
Anthropogenic Effect ◽  
Perennial Plant ◽  
Voronezh Region ◽  
A Minor

Introduction. Radionuclides are recognized as one of the most dangerous pollutants of a surrounding medium in forces of their fissile migration on biological chains and influences on metabolism of alive organisms now. Aim. Studying of accumulation of radionuclides and polysaccharides in roots of a burdock big, collected in the territory of the Voronezh region in the areas which are influenced various anthropogenic influence and also an interrelation research between accumulation of these groups of substances. Materials and methods. The raw material was collected in the territory of Voronezh Region in the areas with different anthropogenic impact. Based on cartography the 36 points of the medicinal vegetable raw material samples collection were chosen in Voronezh Region. The subject matter was the roots of the Greater Burdocks as a wide spread perennial plant. The main artificial (Sr-90 and Cs-137) and natural (K-40, Th-232 and Ra-226) radionuclides as well as a concentration of the total amount of polysaccharides in terms of fructose and the total amount of gravimetrically determined polysaccharides were defined in the samples. Results and discussion. All the samples met the requirements of the pharmacoeial article of the artificial radionuclides content. A content of the total amount of polysaccharides in terms of fructose determined by spectrophotometry significantly varied in the root samples depends on their collection point. Thus, in protected reserved areas a content of the total amount of polysaccharides in term of fructose was 30-45 % high than in the samples from ecologically unfavourable areas. However all the samples also met the requirements of the pharmacoeial article of the total amount of polysaccharides in terms of fructose. A content of the polycaccharides close to the lower norm was found out in a sample collected in Povorino, while a content of the polycaccharides in terms of fructose significantly exceeded the normative standard in the rest of the samples. A content of gravimetrically determined water-soluble polysaccharides in the roots varied from 21,17 to 37,82 %. No noticeable anthropogenic effect on the accumulation of these substances was found. The samples from ecologically unfavourable and protected areas were little different from each other in a quantitative content of water-soluble polysaccharides. Conclusion. The correlation coefficients between the content of radionuclides and major groups of bioactive substances in the roots indicated that the radionuclides accumulated in the greater budock roots in a minor amounts and they did not affect the content of bioactive substances in plant raw material.

Simultaneous Spectrophotometric Determination of Salbutamol by Coupling with Diazotized 4-Aminobenzoic acid

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
Hind Hadi ◽  
Gufran Salim
Keyword(s):  
Pharmaceutical Preparations ◽  
Coupling Reaction ◽  
Dosage Forms ◽  
Water Soluble ◽  
Trace Determination ◽  
Aminobenzoic Acid ◽  
Optimum Conditions ◽  
Colored Product ◽  
Versus Concentration

A simple, rapid and sensitive spectrophotmetric method for trace determination of salbutamol (SAL) in aqueous solution and in pharmaceutical preparations is described. The method is based on the diazotization coupling reaction of the intended compound with 4-amino benzoic acid (ABA) in alkaline medium to form an intense orange, water soluble dye that is stable and shows maximum absorption at 410 nm. A graph of absorbance versus concentration indicates that Beer’s law is obeyed over the concentration range of 0.5-30 ppm, with a molar absorbtivity 3.76×104 L.mol-1 .cm-1 depending on the concentration of SAL. The optimum conditions and stability of the colored product have been investigated and the method was applied successfully to the determination of SAL in dosage forms.

BODIPY Fluorophores for Membrane Potential Imaging

2019 ◽  
Author(s):  
Jenna Franke ◽  
Benjamin Raliski ◽  
Steven Boggess ◽  
Divya Natesan ◽  
Evan Koretsky ◽  
...  
Keyword(s):  
Mammalian Cells ◽  
Water Solubility ◽  
Water Soluble ◽  
Voltage Sensitivity ◽  
Chemical Transformations ◽  
Direct Modification ◽  
Biological Compatibility ◽  
Meso Position ◽  
Ionizable Groups ◽  
Boron Center

Fluorophores based on the BODIPY scaffold are prized for their tunable excitation and emission profiles, mild syntheses, and biological compatibility. Improving the water-solubility of BODIPY dyes remains an outstanding challenge. The development of water-soluble BODIPY dyes usually involves direct modification of the BODIPY fluorophore core with ionizable groups or substitution at the boron center. While these strategies are effective for the generation of water-soluble fluorophores, they are challenging to implement when developing BODIPY-based indicators: direct modification of BODIPY core can disrupt the electronics of the dye, complicating the design of functional indicators; and substitution at the boron center often renders the resultant BODIPY incompatible with the chemical transformations required to generate fluorescent sensors. In this study, we show that BODIPYs bearing a sulfonated aromatic group at the meso position provide a general solution for water-soluble BODIPYs. We outline the route to a suite of 5 new sulfonated BODIPYs with 2,6-disubstitution patterns spanning a range of electron-donating and -withdrawing propensities. To highlight the utility of these new, sulfonated BODIPYs, we further functionalize them to access 13 new, BODIPY-based voltage-sensitive fluorophores. The most sensitive of these BODIPY VF dyes displays a 48% ΔF/F per 100 mV in mammalian cells. Two additional BODIPY VFs show good voltage sensitivity (≥24% ΔF/F) and excellent brightness in cells. These compounds can report on action potential dynamics in both mammalian neurons and human stem cell-derived cardiomyocytes. Accessing a range of substituents in the context of a water soluble BODIPY fluorophore provides opportunities to tune the electronic properties of water-soluble BODIPY dyes for functional indicators.

Wastewater Treatment Using Marine Algae Biomass as Pollutants Removal

2018 ◽  
Vol 69 (5) ◽  
pp. 1089-1098
Author(s):  
Elena Suzana Biris Dorhoi ◽  
Maria Tofana ◽  
Simona Maria Chis ◽  
Carmen Elena Lupu ◽  
Ticuta Negreanu Pirjol
Keyword(s):  
Wastewater Treatment ◽  
Green Algae ◽  
Marine Algae ◽  
Tap Water ◽  
Ulva Lactuca ◽  
Raw Material ◽  
Bioactive Substances ◽  
Algae Biomass ◽  
Marine Biomass ◽  
Pollutants Removal

The valorification of the marine biomass is an important resource for many industries like pharmaceutical, supplying raw material for the extraction of bioactive substances (vitamins, sterols and collagen), cosmetics, biofertilizers and wastewater treatment. In the last years a special attention has been given to the use of macroalgae. The aim of this study was to emphasize the capacity of two representative green algae species frequent presents on the Romanian shore, Ulva lactuca (L.) and Cladophora vagabunda (L.) Hoek, to remove two usual detergents from wastewater. The green algae washed, dried at room temperature, macerated to powder were introduced into different filter paper for comparison, then immersed in waste water treated with different concentrations of detergents. Tap water was used for the experiment. The results show that Ulva lactuca (L.) species is suitable than Cladophora vagabunda (L.) Hoek species, for wastewater treatment.

scholarly journals Functionalization of Enzymatically Treated Apple Pomace from Juice Production by Extrusion Processing

Foods ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 485
Author(s):  
Vera Schmid ◽  
Antje Trabert ◽  
Judith (Schäfer) Keller ◽  
Mirko Bunzel ◽  
Heike P. Karbstein ◽  
...  
Keyword(s):  
Water Absorption ◽  
Dietary Fiber ◽  
Water Solubility ◽  
Apple Pomace ◽  
Raw Material ◽  
Food Ingredients ◽  
Insoluble Dietary Fiber ◽  
Extrusion Processing ◽  
The Impact ◽  
Treated Apple

Food by-products can be used as natural and sustainable food ingredients. However, a modification is needed to improve the technofunctional properties according to the specific needs of designated applications. A lab-scale twin-screw extruder was used to process enzymatically treated apple pomace from commercial fruit juice production. To vary the range of the thermomechanical treatment, various screw speeds (200, 600, 1000 min−1), and screw configurations were applied to the raw material. Detailed chemical and functional analyses were performed to develop a comprehensive understanding of the impact of the extrusion processing on apple pomace composition and technofunctional properties as well as structures of individual polymers. Extrusion at moderate thermomechanical conditions increased the water absorption, swelling, and viscosity of the material. An increase in thermomechanical stress resulted in a higher water solubility index, but negatively affected the water absorption index, viscosity, and swelling. Scanning electron microscopy showed an extrusion-processing-related disruption of the cell wall. Dietary fiber analysis revealed an increase of soluble dietary fiber from 12.6 to 17.2 g/100 g dry matter at maximum thermo-mechanical treatment. Dietary fiber polysaccharide analysis demonstrated compositional changes, mainly in the insoluble dietary fiber fraction. In short, pectin polysaccharides seem to be susceptible to thermo-mechanical stress, especially arabinans as neutral side chains of rhamnogalacturonan I.

scholarly journals Synthesis, Characterization and Bactericidal Activity of a 4-Ammoniumbuthylstyrene-Based Random Copolymer

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1140
Author(s):  
Silvana Alfei ◽  
Gabriella Piatti ◽  
Debora Caviglia ◽  
Anna Maria Schito
Keyword(s):  
Antibacterial Activity ◽  
Bactericidal Activity ◽  
Antimicrobial Agents ◽  
Water Solubility ◽  
Physicochemical Characterization ◽  
Random Copolymer ◽  
Water Soluble ◽  
Cationic Polymers ◽  
Severe Infections

The growing resistance of bacteria to current chemotherapy is a global concern that urgently requires new and effective antimicrobial agents, aimed at curing untreatable infection, reducing unacceptable healthcare costs and human mortality. Cationic polymers, that mimic antimicrobial cationic peptides, represent promising broad-spectrum agents, being less susceptible to develop resistance than low molecular weight antibiotics. We, thus, designed, and herein report, the synthesis and physicochemical characterization of a water-soluble cationic copolymer (P5), obtained by copolymerizing the laboratory-made monomer 4-ammoniumbuthylstyrene hydrochloride with di-methyl-acrylamide as uncharged diluent. The antibacterial activity of P5 was assessed against several multi-drug-resistant clinical isolates of both Gram-positive and Gram-negative species. Except for strains characterized by modifications of the membrane charge, most of the tested isolates were sensible to the new molecule. P5 showed remarkable antibacterial activity against several isolates of genera Enterococcus, Staphylococcus, Pseudomonas, Klebsiella, and against Escherichia coli, Acinetobacter baumannii and Stenotrophomonas maltophilia, displaying a minimum MIC value of 3.15 µM. In time-killing and turbidimetric studies, P5 displayed a rapid non-lytic bactericidal activity. Due to its water-solubility and wide bactericidal spectrum, P5 could represent a promising novel agent capable of overcoming severe infections sustained by bacteria resistant the presently available antibiotics.

scholarly journals Effect of DMPA and Molecular Weight of Polyethylene Glycol on Water-Soluble Polyurethane

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1915 ◽  
Author(s):  
Eyob Wondu ◽  
Hyun Woo Oh ◽  
Jooheon Kim
Keyword(s):  
Molecular Weight ◽  
Contact Angle ◽  
Polyethylene Glycol ◽  
Photoelectron Spectroscopy ◽  
Water Solubility ◽  
Soft Segment ◽  
Water Soluble ◽  
Size Exclusion ◽  
Resonance Spectroscopy ◽  
Scanning Calorimetry

In this study water-soluble polyurethane (WSPU) was synthesized from isophorone diisocyanate (IPDI), and polyethylene glycol (PEG), 2-bis(hydroxymethyl) propionic acid or dimethylolpropionic acid (DMPA), butane-1,4-diol (BD), and triethylamine (TEA) using an acetone process. The water solubility was investigated by solubilizing the polymer in water and measuring the contact angle and the results indicated that water solubility and contact angle tendency were increased as the molecular weight of the soft segment decreased, the amount of emulsifier was increased, and soft segment to hard segment ratio was lower. The contact angle of samples without emulsifier was greater than 87°, while that of with emulsifier was less than 67°, indicating a shift from highly hydrophobic to hydrophilic. The WSPU was also analyzed using Fourier transform infrared spectroscopy (FT-IR) to identify the absorption of functional groups and further checked by X-ray photoelectron spectroscopy (XPS). The molecular weight of WSPU was measured using size-exclusion chromatography (SEC). The structure of the WSPU was confirmed by nuclear magnetic resonance spectroscopy (NMR). The thermal properties of WSPU were analyzed using thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC).

scholarly journals Enhanced Water Solubility and Oral Bioavailability of Paclitaxel Crystal Powders through an Innovative Antisolvent Precipitation Process: Antisolvent Crystallization Using Ionic Liquids as Solvent

Pharmaceutics ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1008 ◽  
Author(s):  
Qilei Yang ◽  
Chang Zu ◽  
Wengang Li ◽  
Weiwei Wu ◽  
Yunlong Ge ◽  
...  
Keyword(s):  
Oral Bioavailability ◽  
High Performance ◽  
Water Solubility ◽  
Water Soluble ◽  
Precipitation Process ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Antisolvent Precipitation ◽  
Antisolvent Crystallization ◽  
Artificial Gastric Juice

Paclitaxel (PTX) is a poor water-soluble antineoplastic drug with significant antitumor activity. However, its low bioavailability is a major obstacle for its biomedical applications. Thus, this experiment is designed to prepare PTX crystal powders through an antisolvent precipitation process using 1-hexyl-3-methylimidazolium bromide (HMImBr) as solvent and water as an antisolvent. The factors influencing saturation solubility of PTX crystal powders in water in water were optimized using a single-factor design. The optimum conditions for the antisolvent precipitation process were as follows: 50 mg/mL concentration of the PTX solution, 25 °C temperature, and 1:7 solvent-to-antisolvent ratio. The PTX crystal powders were characterized via scanning electron microscopy, Fourier transform infrared spectroscopy, high-performance liquid chromatography–mass spectrometry, X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Raman spectroscopy, solid-state nuclear magnetic resonance, and dissolution and oral bioavailability studies. Results showed that the chemical structure of PTX crystal powders were unchanged; however, precipitation of the crystalline structure changed. The dissolution test showed that the dissolution rate and solubility of PTX crystal powders were nearly 3.21-folds higher compared to raw PTX in water, and 1.27 times higher in artificial gastric juice. Meanwhile, the bioavailability of PTX crystal increased 10.88 times than raw PTX. These results suggested that PTX crystal powders might have potential value to become a new oral PTX formulation with high bioavailability.

Sign in / Sign up

Export Citation Format

Share Document