scholarly journals Activated carbon and biochar from pineapple waste biomass for the removal of methylene blue

2021 ◽  
Vol 1 (1) ◽  
pp. 30-36
Author(s):  
Khoirun Nisa Mahmud ◽  
Tan Hui Wen ◽  
Zainul Akmar Zakaria
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Water System ◽  
Raw Material ◽  
Waste Biomass ◽  
Adsorbent Dosage ◽  
Pineapple Waste ◽  
Area Functional ◽  
Dye Pollution

Dye pollution in water system is of concern due to its carcinogenicity and its effect on aesthetic feature. One pollutant of interest is methylene blue (MB), which is a cationic dye widely used in industries. In this study, pyrolysis process was used to convert pineapple waste biomass (PWB) into useful adsorbents such as biochar (BC) and activated carbon (AC) to remove MB in water. BC was produced from pyrolysis of PWB (340 °C, 3 hours) whereas AC was prepared from pyrolysis of PWB (500 °C, 1 hour) impregnated with zinc chloride (ZnCl2). Prior to use, AC-PWB and BC-PWB were characterized for surface area, functional groups and surface morphology. Removal of MB was investigated by varying different parameters i.e. initial MB concentration and contact time, adsorbent dosage and temperature. Results obtained showed that AC-PWB has higher adsorption capacity than BC-PWB. The adsorption capacity and adsorption rate increased with increasing initial concentration of MB, adsorbent dosage and temperature until reached equilibrium condition. As a conclusion, PWB can be used as a useful raw material to produce cheap and environmentally friendly adsorbent to remove dye from solution.

scholarly journals Preparation of Activated Carbon from the Wood of Paulownia tomentosa as an Efficient Adsorbent for the Removal of Acid Red 4 and Methylene Blue Present in Wastewater

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1453
Author(s):  
Sultan Alam ◽  
Muhammad Sufaid Khan ◽  
Wahida Bibi ◽  
Ivar Zekker ◽  
Juris Burlakovs ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Second Order ◽  
Raw Material ◽  
Experimental Result ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Paulownia Tomentosa ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

Paulownia tomentosa, a woody plant that is widely found in Pakistan and in other regions of the world, was used as a raw material to prepare activated carbon using chemical and physical activation methods. Adsorption of the dyes- acid red 4 and methylene blue onto the prepared activated carbon were analyzed by batch experiments. The impacts of different adsorption parameters such as pH, temperature, contact time, initial dye concentration and adsorbent dosage were also evaluated. Equilibrium data were fitted into various isotherm models such as: Langmuir, Temkin and Freundlich. High regression values were achieved with Langmuir isotherm model. Different kinetic adsorption models such as pseudo-first-order, pseudo-second-order and intra-particle diffusion model models were applied. The adsorption kinetics was found to be best-fitted into pseudo-second-order kinetic model. The optimum pH for acid red 4 was around 1 while for methylene blue it was 8. The optimum adsorbent dosage was 0.3 g for both dyes used. The activation energy (Ea) values were 30.57 and 3.712 kJ/mol, respectively for acid red 4 and methylene blue while the enthalpy (ΔH) and entropy (ΔS) values were correspondingly as 24.88/1.1927 kJ/mol and −2843.32/−0.329 J·mol/K for the mentioned dyes. The experimental result showed that the prepared activated carbon was the best in the removal of acid red 4 and methylene blue from aqueous media and therefore, could be preferably used as cheap adsorbent in wastewater treatment.

scholarly journals Pengaruh Waktu Kontak dan Massa Adsorben Biji Asam Jawa (Tamarindus indica) dengan Aktivator H3PO4 terhadap Kapasitas Adsorpsi Zat Warna Methylene Blue

2019 ◽  
Vol 8 (2) ◽  
pp. 54-60
Author(s):  
Andri Rizki ◽  
Ervan Syahputra ◽  
Setiaty Pandia ◽  
Halimatuddahliana
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Raw Material ◽  
Wave Number ◽  
Constant Weight ◽  
Methylene Orange ◽  
Freundlich Adsorption Isotherm ◽  
The Fourier Transform

This study aims to determine the best adsorption capacity of methylene blue with variations in the mass of the adsorbent, contact time and determine the reaction kinetics and adsorption isotherms of activated carbon. The raw material for activated carbon is tamarind seeds. Tamarind seeds is started to neutral pH and dried in an oven at 130°C to a constant weight, then mashed using a blender and sifted using a 140 mesh sieve. adsorbent 140 mesh was added to 100 ml of methylene blue solution at a stirring speed 150 rpm for each variation of contact time 30 minutes, 60 minutes, 120 minutes and 180 minutes and mass of adsorbent 0,3 gs, 0,4 gs, 0,6 gs and 0,9 gs. The efficiency of the best description of methylene blue is 98,827% with 120 minutes and pH 6 at 0,9 gs of activated carbon. The maximum methylene orange adsorption capacity is 24,670 mg/g at 100 mg/L methylene blue concentration. The model suitable for this study is the second order kinetics and Freundlich adsorption isotherm. The results of the Fourier Transform Infra-Red (FTIR) spectrophotometer on the raw material of Tamarind seeds before activated were obtained by wave number which shows the presence of functional goups C-O, O-H, and C=O goups which form a special goup found on biosorbent, functional goups that appear after activation is a C=C goup which shows an increase in carbon and C-H goups (Alkenes). The results of the Scanning Electron Microscope (SEM) characterization show that the surface morphology of the activated carbon from tamarind seeds has a surface that is open, coarse, and uniform porosity. The pores of biosorbent after activation in vacant soil without impurity.

Analisis Variasi Temperatur Aktivasi Terhadap Daya Serap Arang Aktif Tandan Aren (Arenga Pinnata Merr) Dengan Agen Aktivasi Potassium Silicate(K2SiO3)

2020 ◽  
Vol 5 (3) ◽  
pp. 221
Author(s):  
Muhammad Azam ◽  
Muhammad Anas ◽  
Erniwati Erniwati
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Temperature Variation ◽  
Chemical Activation ◽  
Weight Ratio ◽  
Potassium Silicate ◽  
Physical Activation ◽  
Activation Temperature ◽  
Pyrolysis Reactor

This study aims to determine the effect of variation of activation temperature of activated carbon from sugar palm bunches of chemically activatied with the activation agent of potassium silicate (K2SiO3) on the adsorption capacity of iodine and methylene blue. Activated carbon from bunches of sugar palmacquired in four steps: preparationsteps, carbonizationstepsusing the pyrolysis reactor with temperature of 300 oC - 400 oC for 8 hours and chemical activation using of potassium silicate (K2SiO3) activator in weight ratio of 2: 1 and physical activation using the electric furnace for 30 minutes with temperature variation of600 oC, 650 oC, 700 oC, 750 oC and 800 oC. The iodine and methyleneblue adsorption testedby Titrimetric method and Spectrophotometry methodrespectively. The results of the adsorption of iodine and methylene blue activated carbon from sugar palm bunches increased from 240.55 mg/g and 63.14 mg/g at a temperature of 600 oC to achieve the highest adsorption capacity of 325.80 mg/g and 73.59 mg/g at temperature of 700 oC and decreased by 257.54 mg/g and 52.03 mg/g at a temperature of 800 oCrespectively.However, it does not meet to Indonesia standard (Standard Nasional Indonesia/SNI), which is 750 mg/g and 120 mg/g respectively.

scholarly journals Cotton stalk-derived hydrothermal carbon for methylene blue dye removal: investigation of the raw material plant tissues

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Libo Zhang ◽  
Junyan Tan ◽  
Gangying Xing ◽  
Xintong Dou ◽  
Xuqiang Guo
Keyword(s):  
Methylene Blue ◽  
Functional Materials ◽  
Raw Material ◽  
Plant Tissues ◽  
Chemical Compositions ◽  
Waste Biomass ◽  
Cotton Stalk ◽  
Acid Base ◽  
X Ray ◽  
Bet Analysis

AbstractConversion of the abundant agricultural residual cotton stalk (CS) into useful chemicals or functional materials could alleviate the fossil fuels caused energy shortages and environmental crises. Although some advances have been achieved, less attention has been paid to the plant tissues effect. In this study, the plant tissue of CS was changed by part degradation of some components (hemicelluloses and lignin, for example) with the aid of acid/base (or both). The pretreated CS was transformed into hydrochar by hydrothermal carbonization (HTC) method. Morphological and chemical compositions of CS hydrochar were analyzed by various techniques, including elemental analysis, Fourier transform infrared (FTIR), BET analysis, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). Methylene blue (MB) removal of prepared CS hydrochar was used to evaluate CS hydrochar pollutions adsorption capacity. Results reveal acid/base (or both) pretreatment is beneficial for CS raw material to prepare high-quality CS hydrochar. The effects of some parameters, such as initial MB concentration, temperature, pH value and recyclability on the adsorption of MB onto both acid and base-pretreated CS hydrochar (CS-H2SO4 + NaOH-HTC) were studied. The present work exhibits the importance of agricultural waste biomass material plant tissues on its derived materials, which will have a positive effect on the direct utilization of waste biomass.

Removal of Cd(II) from Water System Using Novel Biosorbent Derived from Persimmon Fallen Leaves

2015 ◽  
Vol 1130 ◽  
pp. 685-688
Author(s):  
Rui Yi Fan ◽  
Qing Ping Yi ◽  
Qing Lin Zhang ◽  
Zheng Rong Luo
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Water System ◽  
Raw Material ◽  
Batch Adsorption ◽  
Diospyros Kaki ◽  
Cadmium Metal ◽  
Fallen Leaves ◽  
Adsorption Desorption

A biosorbent was prepared by treating the persimmon (Diospyros kaki Thunb.) fallen leaves with sodium hydroxide (NaOH). The NaOH concentration and stirring period for the preparation of the biosorbent were adjusted to optimise the Cd(I) adsorption capacity of the biosorbents. Removal of highly toxic Cadmium metal ions from water system using the optimal biosorbent named ‘NPFL’ was investigated using a mimic industrial column. The result showed that NPFL could remove Cd(II) in large quantities from aqueous solution with coexisting metal ions. The raw material, NPFL and Cd(II) loaded NPFL were characterized by SEM-EDS. The reusability of NPFL was also studied by batch adsorption-desorption test.

Characterization of Adsorbents Derived from Palm Fiber Waste and its Potential on Methylene Blue Adsorption

2020 ◽  
Vol 841 ◽  
pp. 273-277
Author(s):  
Ariany Zulkania ◽  
Muhammad Iqbal ◽  
Syamsumarlin
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Phosphoric Acid ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Methylene Blue Adsorption ◽  
Palm Fiber ◽  
Methylene Blue Removal ◽  
Phosphoric Acid Concentration

In this study, two types of adsorbent including activated carbon and bio-sorbent were produced from Palm fiber wastes (PFW), which were activated by phosphoric acid. The influence of adsorbent type and phosphoric acid concentration on methylene blue adsorption was investigated. The most optimum adsorbent was determined based on adsorption capacity and removal percentage of each adsorbent. The result shows that 9.984 mg/g of adsorption capacity and 99.84% of removal percentage were achieved in 90 minutes’ adsorption, which demonstrates the huge potential of bio-sorbent and was chosen to be the most optimum adsorbent based on methylene blue removal. The characterization of bio-sorbent was then investigated using FTIR and SEM. FTIR result shows that bio-sorbent contains cellulose which affected the adsorption process while SEM result shows the cleaner pores and surface compared to bio-sorbent before activation.

scholarly journals Synthesis of activated carbon from biowaste of fir bark for methylene blue removal

2019 ◽  
Vol 6 (9) ◽  
pp. 190523 ◽  
Author(s):  
Lu Luo ◽  
Xi Wu ◽  
Zeliang Li ◽  
Yalan Zhou ◽  
Tingting Chen ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Nonlinear Models ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Raw Material ◽  
Maximum Adsorption Capacity ◽  
Koh Activation ◽  
Mb Adsorption

Activated carbon (AC) was successfully prepared from low-cost forestry fir bark (FB) waste using KOH activation method. Morphology and texture properties of ACFB were studied by scanning and high-resolution transmission electron microscopies (SEM and HRTEM), respectively. The resulting fir bark-based activated carbon (ACFB) demonstrated high surface area (1552 m 2 g −1 ) and pore volume (0.84 cm 3 g −1 ), both of which reflect excellent potential adsorption properties of ACFB towards methylene blue (MB). The effect of various factors, such as pH, initial concentration, adsorbent content as well as adsorption duration, was studied individually. Adsorption isotherms of MB were fitted using all three nonlinear models (Freundlich, Langmuir and Tempkin). The best fitting of MB adsorption results was obtained using Freundlich and Temkin. Experimental results showed that kinetics of MB adsorption by our ACFB adsorbent followed pseudo-second-order model. The maximum adsorption capacity obtained was 330 mg g −1 , which indicated that FB is an excellent raw material for low-cost production of AC suitable for cationic dye removal.

scholarly journals Modeling and Optimization for Production of Rice Husk Activated Carbon and Adsorption of Phenol

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Y. S. Mohammad ◽  
E. M. Shaibu-Imodagbe ◽  
S. B. Igboro ◽  
A. Giwa ◽  
C. A. Okuofu
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Rice Husk ◽  
Adsorption Process ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Process Variables ◽  
Adsorbent Dosage ◽  
Pretreatment Temperature

Modeling of adsorption process establishes mathematical relationship between the interacting process variables and process optimization is important in determining the values of factors for which the response is at maximum. In this paper, response surface methodology was employed for the modeling and optimization of adsorption of phenol onto rice husk activated carbon. Among the action variables considered are activated carbon pretreatment temperature, adsorbent dosage, and initial concentration of phenol, while the response variables are removal efficiency and adsorption capacity. Regression analysis was used to analyze the models developed. The outcome of this research showed that 99.79% and 99.81% of the variations in removal efficiency and adsorption capacity, respectively, are attributed to the three process variables considered, that is, pretreatment temperature, adsorbent dosage, and initial phenol concentration. Therefore, the models can be used to predict the interaction of the process variables. Optimization tests showed that the optimum operating conditions for the adsorption process occurred at initial solute concentration of 40.61 mg/L, pretreatment temperature of 441.46°C, adsorbent dosage 4 g, adsorption capacity of 0.9595 mg/g, and removal efficiency of 97.16%. These optimum operating conditions were experimentally validated.

Sign in / Sign up

Export Citation Format

Share Document