scholarly journals Development of Learning Modules Based on a Realistic Mathematical Approach with Autograph Software to Improve Creative Mathematical Thinking Ability Students of SMP Negeri 1 Blangkejeren

Author(s):  
Rike Ahmadi ◽  
Edi Syahputra ◽  
Bornok Sinaga

This study aims to analyze the practicality of the learning modules developed based on the Realistic Mathematical Approach with autograph software, to analyze the effectiveness of the learning modules developed based on the Realistic Mathematical Approach assisted by autograph software, and to describe the improvement of students' mathematical creative thinking abilities through learning modules developed based on the Mathematical Approach. Realistic assisted autograph software. The data were obtained through the learning module validity sheet consisting of the lesson plan validation sheet and the mathematical creative ab ility test validation sheet, student response questionnaires and teacher interview guidelines for the learning module and the learning module effectiveness instrument seen from the students' mathematical creative test results. Module development in this study uses the Thiagarajan, Semmel and Semmel development models, namely the 4-D model (define, design, develop, disseminate). The results of the research were students and teachers stated that the developed device was easy to use, the students' critical thinking ability obtained classical completeness with a percentage of 87.5%, the level of student activity met the ideal time tolerance criteria set, student responses to the components of learning devices and learning activities is positive. The increase in creative thinking skills in the first try was 77.9, an increase in the second try to 81.64.

Author(s):  
Endar Chrisdiyanto ◽  
Zudhy Nur Alfian ◽  
Aji Pangestu

The objective of this development research is to produce a mathematical problem-based learning tool on the topic of social arithmetic to improve the creative thinking skills of junior high school students. This research describes the quality of the learning tools developed in terms of three aspects, namely validity, practicality, and effectiveness. The development model employed in the development of this learning device is the ADDIE model. The ADDIE model consists of analysis, design, development, implementation, and evaluation. Learning devices meet the validity criteria indicated by the lesson plan score of 151 in the very good category. The assessment score of student's worksheet is 125 which is in a very good category. Teacher questionnaire responses obtain a score of 87 which is in the very practical category and the student response questionnaire obtains a score of 68.29 which is in the very practical category. The results of the analysis on the effectiveness show that the learning device meets the effectiveness criteria viewed from the percentage of completeness of 87%, the significance value of 0,000 <α (0.005), and the value of t count (6,604)> t table (1,645).


2019 ◽  
Vol 2 (4) ◽  
pp. 213
Author(s):  
Astri Elpiani ◽  
Asep Bagas

This study aims to determine the ability of mathematical creative thinking students who learn using the Problem Based Learning approach. The population in this study were students of SMP 1 Jatisari class VIII A in Sukamaju Village which consisted of 18 students and 12 female students. This study was a quasi-experimental study using the results of a trial test pretest-posttest experimental control group. The instrument used in this study is a test to measure mathematical creative thinking skills in the form of 5 questions. Then the score data of students' mathematical creative thinking ability were analyzed statistically by using a difference test of two average values from the results of the pretest-posttest. The results showed that students' creative mathematical thinking ability using the Problem Based Learning approach was different from the results of the pretest-posttest. Besides that students also showed positive perceptions of problem-based learning and there were good results on mathematical creative thinking skills.


2021 ◽  
Vol 5 (2) ◽  
Author(s):  
Titi Solfitri ◽  
Hesty Marwani Siregar

This study aims to: 1) To find out how the effectiveness of the integration technique module in integral calculus learning, and 2) To find out whether there is an increase in the mathematical creative thinking ability by using the integration technique module in integral calculus learning. Module development is carried out using the ADDIE model which has five stages are Analysis, Design, Development, Implementation, and Evaluation. The subjects in this study were 16 students in the 3rd semester of the Mathematics Education Study Program, Faculty of Teacher Training and Education, Universitas Riau. The research data collection instruments were an expert validation questionnaire, a student response questionnaire, and a mathematical creative thinking ability test. The data obtained were analyzed using quantitative and qualitative descriptive analysis methods. Based on the results of the validity test, the integration technique module was declared valid and suitable for students to use in the integral calculus course. Judging from the results of the module practicality test, the average percentage of practicality values is 77.8125 and is in the practical category. Referring to the results of the module effectiveness test, the n-gain average of students' mathematical creative thinking abilities is 0.64 and is in the medium category. Because the integrated engineering module has met the criteria of validity, practicality, and effectiveness, it can be said that the developed integration technique module can improve students' mathematical creative thinking skills in the integral calculus course.


2018 ◽  
Vol 2 (1) ◽  
pp. 33
Author(s):  
Rina Febriana ◽  
Zulyadaini Zulyadaini ◽  
Aisyah Aisyah

Abstract: Math is able to train logical, analytical, systematic, critical, and creative thinking of students. Mathematical critical thinking ability is a capability that supports a variety of other mathematical thinking abilities. The students' critical thinking ability is also closely related to the personality or character of the student. Personality can affect how a person behaves, thinks, or interacts with around. The personality types discussed in this study are examined from four types of temperaments by the theories of Hippocrates and Galenus. This research includes the type of qualitative research that uses descriptive qualitative research methodology. This research will be conducted on the students of class XI MIA SMA Negeri 2 Kota Jambi. The thing described in this research is the students' mathematical critical thinking based on the dominant personality type on linear program solution. The results of personality tests of the instrument adapted from the patterns of personality by Lana Bateman found 40 dominant students that is the type of phlegmatic personality. Furthermore, based on sampling technique that is purposive sampling technique, 2 students are taken as research subjects ie phlegmatic students with the highest level of critical thinking ability called first phlegmatic students and phlegmatic students with the lowest level of critical thinking ability is called second phlegmatic student. From the results obtained can be concluded that the first phlegmatic students have the level of critical thinking skills are very critical and the second phlegmatic students have a critical level of critical thinking is not critical. This is inversely between the ability to think critically and the type of phlegmatic personality. The first phlegmatic student with enough phlegmatic category has critical critical mathematical thinking and the second phlegmatic student with very high / dominant phlegmatic category, critical critical thinking ability is not critical.Keywords: Mathematical Critical Thinking Ability, Four Temperament Types


2017 ◽  
Vol 5 (1) ◽  
pp. 795
Author(s):  
Wahdatun Nisa Khoirunah ◽  
Suyatno Suyatno ◽  
Muslimin Ibrahim

This study aimed to describe the feasibility, student activities, student response, student mastery of concepts, creative thinking skills, and the relationship between creative thinking skills with concept mastery, and obstacles after implementation of the Hypothetical Deductive learning cycle model on buffer solution topic. This study was conducted in three stages, namely preparation of teaching materials, validation and revision stages of teaching materials, and  implementation the Hypothetical Deductive learning cycle model using the one group pretest-posttest design. Results of research showed that the feasibility of the lesson plan included in the excellent category, the dominant activity of students were to discuss with their group, students indicated a positive response to learning, the average gain score of concept mastery was 0.78 (high gain) and those of creative thinking skill was 0.62 (moderate gain), and there was a strong and significant correlation between creative thinking skill and student concept mastery with correlation value of 0.905, and the main obstacles found at the first meeting was students difficulties in designing experiments and still not familiar with the learning model that applied. Based on the data analysis, it had been concluded that the hypothetical Deductive learning cycle model could increased students’ creative thinking skills and student’s concept mastery. Penelitian ini ditujukan untuk mendeskripsikan keterlaksanaan, aktivitas siswa, respons siswa, penguasaan konsep siswa, keterampilan berpikir kreatif, hubungan antara keterampilan berpikir kreatif dengan penguasaan konsep siswa, dan hambatan-hambatan setelah implementasi model siklus belajar Hipotetikal Deduktif pada pokok bahasan larutan penyangga. Penelitian ini dilaksanakan dalam tiga tahap, yaitu tahap pembuatan perangkat pembelajaran, tahap validasi dan revisi perangkat pembelajaran, serta tahap implementasi model pembelajaran siklus belajar Hipotetikal Deduktif menggunakan rancangan One Group Pretest-Posttest Design. Hasil penelitian menunjukkan bahwa keterlaksanaan RPP termasuk dalam kategori sangat baik, aktivitas siswa yang dominan adalah berdiskusi dengan teman sekelompok, siswa menunjukkan respon positif terhadap pembelajaran, skor peningkatan penguasaan konsep siswa rata-rata sebesar 0,78 (gain tinggi) sedangkan skor peningkatan keterampilan berpikir kreatif rata-rata sebesar 0,62 (gain sedang), serta terdapat korelasi yang kuat dan signifikan antara keterampilan berpikir kreatif dan penguasaan konsep siswa, dengan harga koefisien korelasi sebesar 0,905, dan hambatan utama yang ditemukan pada pertemuan pertama yaitu siswa kesulitan dalam merancang eksperimen serta masih canggung dengan model pembelajaran yang diterapkan. Berdasarkan hasil analisis data dapat disimpulkan bahwa model siklus belajar Hipotetikal Deduktif dapat digunakan untuk meningkatkan keterampilan berpikir kreatif dan penguasaan konsep siswa.


2019 ◽  
Vol 3 (1) ◽  
pp. 93-100
Author(s):  
Krisdia Wati

This research is based on the low level of creative thinking of the students, this is because in the current study it is felt that the teacher is still less creative in composing the problem, why can be said so because the teacher only gives convergent problem where there is only one correct answer. One alternative to overcome this with teachers should provide a devergen problem by applying the model of learning Think Pair and Share with Open ended approach. The aim of this research is to know and to describe 1) to describe the improvement of students' mathematical thinking ability to construct flat rectangle, 2) to know the student's response to the use of Cooperative TPS learning model with Open-Ended approach on rectangular material. This research includes classroom action research. Location of research in SMP N 2 Widang with subject of student of class VII-E counted 25 student. Instruments in this research is a test of students' creative thinking ability and student response questionnaire. The result of the creative thinking test is obtained after applying the think pair share model with the open ended approach shows that the students' mathematical creative thinking ability has increased on each indicator, the average of creative thinking ability each cycle has increased, because from the initial average of 0.3 in cycle I, increased to 12.4 in cycle II, and in cycle III also increased by 16, and student response to use of Think Pair Share learning model with Open ended approach proved quite effective, efficient, and student responded positively when learning process take place. This is indicated by the results of the study average percentage of student response 99% because greater than 75% and who respond negatively as much as 1% then it can be said positive response


2020 ◽  
Vol 4 (3) ◽  
Author(s):  
Endang Istikomah

The use of modules in learning aims so that students can learn independently without or with the guidance of the lecturer. There is no teaching material as a learning guide that meets the needs of students in IT-based mathematics learning courses in the form of LKM, Modules or textbooks.This study aims at finding and examining further the response of students to ICT-based mathematics learning modules. The form of this research is descriptive research. The research subjects of the even semester students are 2018/2019 in ICT-based mathematics learning courses. The instrument used was a student response questionnaire. Data collection techniques using a Likert scale through Google Form. The data was processed using Microsoft Excel 2010. The results showed that student’s responses to the ICT-based mathematics learning module as a whole were positive with an average on the material Aspects, the Interest Aspects of the module and the Module Aspects respectively of 92, 42%, 87 % and 93, 16%.. Thus it can be concluded that ICT-based mathematics learning using modules can be applied.


2020 ◽  
Vol 6 (2) ◽  
pp. 151
Author(s):  
Muhammad Asriadi ◽  
Edi Istiyono

This study aims to determine the ability of creative thinking high school students in physics learning, know the form of assessment of creative thinking abilities. The study was conducted at SMAN 6 Yogyakrata. This type of research is a survey with a cross-sectional method that is a survey conducted once and at a time. The subjects were the principals, teachers of physics from SMAN 6 Yogyakrata and 30 grade XI students. observations, interviews, and questionnaires were used as data collection techniques. The data analysis method used was the quantitative-qualitative descriptive analysis. The results showed that the creative thinking ability of class XI MIA 1 students at SMAN 6 Yogyakarta can be said to be in the average and quite good category, although there are some students whose level of creative thinking ability is low. In addition, the form of assessment used by physics teachers has not been effective and accurate enough in assessing students 'creative thinking abilities. So it is recommended to use The Torrance Tests of Creative Thinking (TTCT) in physics learning because it has been proven to be accurate in assessing students' creative thinking abilities.


2020 ◽  
Vol 4 (2) ◽  
pp. 202-2015
Author(s):  
May Sarah ◽  
Rahmiati Rahmiati

This research aims to analyze and describe the design of online learning modules integrated macromedia flash that is feasible, practical and effective to be used in the lessons of traditional bun arrangement. This research includes a type of development research with the target is students of grade XI SMK Private PAB  Medan. The research data was collected through validation sheets, student response questionnaires as well as tests. Data analysis techniques used are quantitative and qualitative data analysis and t-test. The results obtained: (1)  macromedia flash integrated online learning module developed with 4-D model(define,  design,  develop  and  disseminate),module designed in PDF format with sizeA4 (21 × 29.7 cm) and integrated macromedia flash that can be accessed and downloaded by students online through Google Classroom application; (2) the integrated online learning module  macromedia flash developed has been declared valid and practically used in the learning of traditional bun arrangement; and (3)  The resulting macromedia flash integrated online learning module is also stated to be effective in the learning of traditional bun arrangement and proven from the results of hypothesis testing with t-count  >  t-table value of 3,761  >  2.00 and sig. 0.000 < 0.05.


2020 ◽  
Vol 6 (12) ◽  
pp. 3007-3011
Author(s):  
Alpi Zaidah ◽  
◽  
Ermila Mahariyanti ◽  

This study aims to obtain a valid scientific-based physics learning module to improve critical thinking skills in Dynamic Fluid material for high school/MA students. This study uses a research development design and approach or is included in development research. In this study, a scientific-based physics learning module was developed. The development of this module refers to the development of the (4-D model) proposed by Thiagarajan. This model consists of 4 development stages, namely (Define, Design, Develop, and Disseminate). However, this study is only limited to the development stage, namely the validation stage. The validation test is a theoretical validation. Namely, assurance carried out by experts in their fields. The confirmation includes material, media, language, teacher and peer validation. The research results found that the physics-based learning module was scientifically based on improving critical thinking skills in Dynamic Fluid material for high school / MA students, which were developed to meet the validity criteria. In conclusion, the physics-based learning module to improve critical thinking skills in Dynamic Fluid material for high school / MA students is very well developed.


Sign in / Sign up

Export Citation Format

Share Document