scholarly journals Egy pub új élete

Metszet ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 28-33
Author(s):  
Péter Sebes
Keyword(s):  
International Market ◽  
Point Of View ◽  
Town Planning ◽  
Creative Industry ◽  
Industry Sector ◽  
The United Kingdom ◽  
Public House ◽  
Local Tradition ◽  
Small Footprint

The creative industry sector in the United Kingdom holds a special place regarding cross disciplinary activities which supports collective and individual successes at a decisive level on the international market. Taking a redundant public house, which later functioned as a family home, adding another floor to create an artist's studio retains the local tradition for small footprint vertical developments and provides a studio space which benefits from its location and quality of natural daylighting. From a town planning point of view the streetscape is maintained, as is the historical message, whilst providing a creative place of employment.

scholarly journals Guidance and Counseling Design For Workers in Creative Industry Sector

2017 ◽  
Vol 13 (1) ◽  
Author(s):  
Kamin Sumardi
Keyword(s):  
Economic Crisis ◽  
Creative Industries ◽  
Living Standards ◽  
National Standard ◽  
Creative Industry ◽  
Guidance And Counseling ◽  
Research Subjects ◽  
Development Method ◽  
Industry Sector

Creative industry is one of sectors that most resistant to the economic crisis. The creative industry is a group of industries that relies on individual creativity, skill and talent that has ability to improve living standards and provide employment through creating ideas and exploiting copyright. To optimize their performance they need guidance and counseling which are appropriate to their characteristics and needs. The aim of this study is develop a model of guidance and counseling which is specific and relevant to the needs of workers in the creative industries. The study used research and development method. Additionally, the study used interviews and observations as the research instrument. The location of study was the district of creative industries in Bandung. The research subjects were 3 creative industries. The results of the study show that counseling system toward the employees has not been implemented comprehensively and sustainably. The guidance and counseling were implemented only on certain aspects related to the quantity and quality of the products. The guidance was implemented only by such industries and has not involved other parties. The conclusion of the study concludes that the creative industries need a model of guidance and counseling which would help them to develop their activities and products must be in accordance with national standard in order to be more competitive.

scholarly journals Evaluation of toxic compounds and quality parameters on the aged Brazilian sugarcane spirit

2020 ◽  
Vol 9 (8) ◽  
pp. e395985544 ◽  
Author(s):  
Edilson Jardim Viana ◽  
Iasnaia Maria de Carvalho Tavares ◽  
Leonardo Milani Avelar Rodrigues ◽  
Maria das Graças Cardoso ◽  
José Carlos Baffa Júnior ◽  
...  
Keyword(s):  
Quality Standards ◽  
International Market ◽  
Quality Parameters ◽  
Ethyl Carbamate ◽  
Point Of View ◽  
Limiting Factors ◽  
Alcohol Content ◽  
Toxic Compounds ◽  
Production Stages

The typical Brazilian sugarcane spirit, called “cachaça”, is a drink known and marketed throughout the world. Its worldwide popularity was due to the drink called caipirinha, where cachaça is used as one of its main ingredients. Thus, there is a growing concern with its quality. Among the limiting factors for the quality of cachaça from the point of view of food security and suitability for trade and export, the presence of toxic compounds is one of the most important.  Some toxic compounds may be present in the cachaça through contamination or formation during the production stages. Aiming to investigate the presence of some of these compounds in cachaças from Bahia, twenty-seven samples of aged cachaças were collected and analyzed regarding their identity and quality standards. For this purpose, analyzes of quality parameters in relation to alcohol content, acidity, copper, furfural, methanol, ethyl carbamate, higher alcohols, butan-1-ol, and butan-2-ol. Regarding the quality standards, while 74.1% of the samples were not in conformity with the limit established by the law concerning the contents of toxic compounds such as copper, furfural, or ethyl carbamate. Knowledge on the quality of Brazilian cachaça is of great importance for its recognition, since it is marketed throughout the country with growing insertion into the international market.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Physical capital stock, technological upgrading and modernisation in Hungary

2005 ◽  
Vol 55 (2) ◽  
pp. 201-221 ◽  
Author(s):  
Andrea Szalavetz
Keyword(s):  
Capital Accumulation ◽  
Physical Capital ◽  
Developed Countries ◽  
Point Of View ◽  
Technology Generation ◽  
Development Policies ◽  
Specific Factors ◽  
Physical Capital Accumulation

This paper discusses the relation between the quality and quantity indicators of physical capital and modernisation. While international academic literature emphasises the role of intangible factors enabling technology generation and absorption rather than that of physical capital accumulation, this paper argues that the quantity and quality of physical capital are important modernisation factors, particularly in the case of small, undercapitalised countries that recently integrated into the world economy. The paper shows that in Hungary, as opposed to developed countries, the technological upgrading of capital assets was not necessarily accompanied by the upgrading of human capital i.e. the thesis of capital skill complementarity did not apply to the first decade of transformation and capital accumulation in Hungary. Finally, the paper shows that there are large differences between the average technological levels of individual industries. The dualism of the Hungarian economy, which is also manifest in terms of differences in the size of individual industries' technological gaps, is a disadvantage from the point of view of competitiveness. The increasing differences in the size of the technological gaps can be explained not only with industry-specific factors, but also with the weakness of technology and regional development policies, as well as with institutional deficiencies.

Flouride and Nitrate Status of Some Ground Waters in Chittor District of Rajasthan State (India)

2018 ◽  
Vol 6 (9) ◽  
pp. 119
Author(s):  
Trapti Sharma ◽  
R. P. Nagar ◽  
R. C. Gaur ◽  
Pooja Gupta ◽  
Charanjit Kaur
Keyword(s):  
Point Of View ◽  
World Health ◽  
Indian Council ◽  
Standard Methods ◽  
Ground Waters ◽  
Drinking Waters ◽  
Health Organization ◽  
Research World ◽  
Drinking Purpose

In Rajasthan state the ground waters of some areas like Ramganj-mandi, Morak, Barmer, Jaisalmer, Chittor and Udaipur etc. are susceptible from drinking point of view.To test the quality of groundwater in Chittor district 14, ground water samples were collected from various places and analyzed for pH, E.C., Fluoride and Nitrate parameters by standard methods (A.P.H. A., Washington, USA, 1995). The study revealed that none of the ground waters was found suitable completely from drinking point of view. Some are having electrical conductivity > 1.4 dS/m, some are having pH >8.5, some area having fluoride >1.5 ppm and some are having nitrate>45 ppm. These are the limits of various parameters permitted by various International authorities like Bureau of Indian Standard, Indian Council of Medical Research,world health Organization etc. for drinking waters. So, it is recommended to the residents of above areas to use water for drinking purpose only after reverse osmosis or adopting suitable method of removing excess of Fluoride and Nitrate for drinking water to avoid unwanted pathogenic diseases harmful for human health.

POTENSI PENGEMBANGAN SADE SEBAGAI DESA WISATA LOMBOK

2016 ◽  
Vol 20 (2) ◽  
pp. 69-82
Author(s):  
W. Suprihatin ◽  
H. Hailuddin
Keyword(s):  
Analytical Hierarchy Process ◽  
Environmental Aspect ◽  
Priority Level ◽  
Highest Weight ◽  
Local Tradition ◽  
Tourist Village ◽  
Hierarchy Process ◽  
Initial Pattern

The background of the problems in this study is the decreasing quality of Sade hamlet amid rising tourist arrivals. From the environmental aspect, the conditions of the hamlet began to decline, in which the initial pattern of Sade has started a lot of changes towards the deficient and began to leave the local tradition. One effort to improve the condition of Sade hamlet in social, cultural and the environmental aspect is through the formulation of a sustainable structuring, the presence and identity maintaining and making a sustainable Tourism Village. Through analysis of AHP (Analytical Hierarchy Process) by collecting the perceptions of some experts through interviews and questionnaires, obtained by weighting the priority of the experts, namely the preservation of culture as an element of priority-level goals to be achieved in the development of Sade Hamlet as a tourist village at 0,476. While the determination of the level of the main criteria in the achievement of these objectives is the highest weight while maintaining a typical village environment at 0.319. Priority strategies that get the highest weight of the experts is that Sade Hamlet Revitalization with a priority weighting of 0.583. The second priority is the relocation of Hamlet at 0.235. Lowest weighting or last priority is Replication Sade Hamlet at 0.182.

A Futures Study on the Quality Of Life from the Point Of View of Iranian Youth

2017 ◽  
Vol 14 (2) ◽  
pp. 1
Author(s):  
Sina Saeedy ◽  
Mojtaba Amiri ◽  
Mohammad Mahdi Zolfagharzadeh ◽  
Mohammad Rahim Eyvazi
Keyword(s):  
Quality Of Life ◽  
Life Satisfaction ◽  
Mixed Model ◽  
Satisfaction With Life ◽  
Point Of View ◽  
Human Society ◽  
Futures Studies ◽  
The Social ◽  
The University

Quality of life and satisfaction with life as tightly interconnected concepts have become of much importance in the urbanism era. No doubt, it is one of the most important goals of every human society to enhance a citizen’s quality of life and to increase their satisfaction with life. However, there are many signs which demonstrate the low level of life satisfaction of Iranian citizens especially among the youth. Thus, considering the temporal concept of life satisfaction, this research aims to make a futures study in this field. Therefore, using a mixed model and employing research methods from futures studies, life satisfaction among the students of the University of Tehran were measured and their views on this subject investigated. Both quantitative and qualitative data were analysed together in order to test the hypotheses and to address the research questions on the youth discontentment with quality of life. Findings showed that the level of life satisfaction among students is relatively low and their image of the future is not positive and not optimistic. These views were elicited and discussed in the social, economic, political, environmental and technological perspectives. Keywords:  futures studies, quality of life, satisfaction with life, youth

The Importance of Knowledge Transfer to Industry

2016 ◽  
Vol 4 (1) ◽  
pp. 1-6
Author(s):  
Emília Madudová ◽  
Keyword(s):  
Literature Review ◽  
Competitive Advantage ◽  
Divergent Thinking ◽  
Business Environment ◽  
Point Of View ◽  
Creative Industry ◽  
Specific Knowledge ◽  
Creative People ◽  
Industry Needs ◽  
Firm Owners

The paper examines the specific knowledge universities transfer to industry, reflecting to creative industry needs. As results shows, the most asked alumni competences should be tacit knowledge and divergent thinking. Divergent thinking influence the creativity. Creativity is often defined as the ability to develop new and useful ideas, but in deep literature review, we can see few irregularities and different definitions of creativity. The paper also evaluates the importance of creativity from business environment point of view and from the creative industry perspective and creative firm owners. As point of view. Another key finding is, that to educate creative people will be one of the key competitive advantage, because mainly the ability to create and disseminate knowledge is often at the heart of the organization's competitive advantage not only in creative industry, but in transport industry as well.

POTENTIAL OF THE ASTRAKHAN REGION IN THE CONTEXT OF DEVELOPMENT OF RGANIZED FISHING TOURISM

2020 ◽  
pp. 224-234
Author(s):  
Tatiana A. Sribnaya ◽  
◽  
Natalya А. Bodneva ◽  
Keyword(s):  
South Africa ◽  
Quality Of Service ◽  
International Market ◽  
Fish Resources ◽  
Specialized Services

Fishing tourism is one of the modern types of tourism that is aimed at meeting the needs of a certain segment of tourists in fishing. This type of tourism is organized by special enterprises to favorable places for fishing. Fishing tours in most cases include specialized services such as: fishing license, tackle rental, boat rental, instruction and joint fishing with a qualified fishing guide, as well as services aimed at preserving and preparing the fish caught. Such countries as Finland, Norway, Egypt, Namibia, South Africa, Iceland, Sweden, Slovakia, Thailand and Israel occupy high positions in the international market of fishing tourism and are famous for their fish resources. As for fishing tourism in Russia, the demand for fishing tourism is currently increasing. Tourist companies are engaged in expanding the geography of fishing tours and improving the quality of service, which affects the increase in demand for this type of tour. The analysis of the potential of the Astrakhan region, carried out in the article, allowed us to identify opportunities for the development of organizational fishing tourism.

FUNDAMENTAL AND APPLIED SCIENTIFIC RESEARCH: сб.науч.тр./ OEAPS Inc.; редкол.: Флора Бертран (отв.ред.) [и др.]. - Берлин, Германия : OEAPS Inc., 2018. - 58 С.

2018 ◽  
Author(s):  
Мария Григорьевна Алпатова ◽  
Мария Игоревна Щеглова ◽  
Elmira Kalybaevna Adil’bekova ◽  
Nuradin Alibaev ◽  
Arunas Svitojus
Keyword(s):  
Service Sector ◽  
Applied Research ◽  
Point Of View ◽  
Scientific Quality ◽  
Final Decision ◽  
Main Criterion ◽  
The Public ◽  
Peer Reviewers ◽  
Verification Process

The conference is a major international forum for analyzing and discussing trends and approaches in research in the field of basic science and applied research. We provide a platform for discussions on innovative, theoretical and empirical research. The form of the conference: in absentia, without specifying the form in the collection of articles. Working languages: Russian, English Doctors and candidates of science, scientists, specialists of various profiles and directions, applicants for academic degrees, teachers, graduate students, undergraduates, students are invited to participate in the conference. There is one blind verification process in the journal. All articles will be initially evaluated by the editor for compliance with the journal. Manuscripts that are considered appropriate are then usually sent to at least two independent peer reviewers to assess the scientific quality of the article. The editor is responsible for the final decision on whether to accept or reject the article. The editor's decision is final. The main criterion used in assessing the manuscript submitted to the journal is: uniqueness or innovation in the work from the point of view of the methodology being developed and / or its application to a problem of particular importance in the public sector or service sector and / or the setting in which the efforts, for example, in the developing region of the world. That is, the very model / methodology, application and context of problems, at least one of them must be unique and important. Additional criteria considered in the consideration of the submitted document are its accuracy, organization / presentation (ie logical flow) and recording quality.

Sign in / Sign up

Export Citation Format

Share Document