scholarly journals 6 RF Based Wireless Fire Security System for Hospitals

2012 ◽  
Vol 2 (1) ◽  
pp. 3
Author(s):  
Muhammad Arsalan Khan
Keyword(s):  
Health Care ◽  
Radio Frequency ◽  
Low Cost ◽  
Control Unit ◽  
Security System ◽  
Control Panel ◽  
Security Systems ◽  
Additional Training ◽  
Smoke Detectors ◽  
And Control

Wireless Fire Security System increases the secu-rity against fire as compared to conventional fire security systems. Conventional fire security systems are wired and they usually contain smoke detectors and control panel. The control panel is sometimes hard to operate. It’s hard to understand the control panel and operation of security systems. In hospitals and other health care institutions high security against fire is required in order to protect the expensive equipments and chemicals. Every organization needs proper insurance and safety for their equipments and patients. Radio frequency based fire security system was designed to provide high securi-ty against fire with easy to use, hand-held portable control unit. Anyone can easily operate the portable receiver without additional training or knowledge. Wireless fire security system for hospitals is also very low cost device.

scholarly journals 6 RF Based Wireless Fire Security System for Hospitals

2012 ◽  
Vol 1 (1) ◽  
pp. 3
Author(s):  
Muhammad Arsalan Khan
Keyword(s):  
Health Care ◽  
Radio Frequency ◽  
Low Cost ◽  
Control Unit ◽  
Security System ◽  
Control Panel ◽  
Security Systems ◽  
Additional Training ◽  
Smoke Detectors ◽  
And Control

Wireless Fire Security System increases the secu-rity against fire as compared to conventional fire security systems. Conventional fire security systems are wired and they usually contain smoke detectors and control panel. The control panel is sometimes hard to operate. It’s hard to understand the control panel and operation of security systems. In hospitals and other health care institutions high security against fire is required in order to protect the expensive equipments and chemicals. Every organization needs proper insurance and safety for their equipments and patients. Radio frequency based fire security system was designed to provide high securi-ty against fire with easy to use, hand-held portable control unit. Anyone can easily operate the portable receiver without additional training or knowledge. Wireless fire security system for hospitals is also very low cost device.

Design and Development of Low Cost Navigation and Security System for Indian Fisherman Using Adrino Nano Platform

2015 ◽  
Vol 4 (1) ◽  
pp. 28
Author(s):  
Sanket Dessai ◽  
Mahir M.M. ◽  
Mayur R. ◽  
Nilkantha Singha ◽  
Vinutha Avaradhi
Keyword(s):  
Fuel Injection ◽  
Low Cost ◽  
Base Station ◽  
Coast Guard ◽  
Security System ◽  
Injection System ◽  
Control Panel ◽  
Material Loss ◽  
Maritime Boundary ◽  
Time Stamps

<p>The fishing industry plays a major role in development of Indian economy. The recent attacks on fishermen taking place in Indo-Srilanka and Indo-Pakistan maritime boundaries have been major concerns. These attacks are primarily caused by the lack of navigation and security features during the voyage. Hence the current situation demands the implementation of precise facilities for reducing man and material loss. This project involves the design and implementation of a Low cost Navigation and Security System for Indian fishermen on Arduino Nano platform. The system developed solves the above said issues by continously tracking the location of fishing vessel and providing minimal security features. The system ensures that navigation is in safe zone within the nation’s maritime boundary and also prevents crossover. This is acheived using GPS receiver which directly links to GPS satellites for current location of the vessel. The required data fields like the latitude and longitude data along with the time stamps are extracted from the GPS samples and used for comparision for determining the exact location of the vessel. This procedure will help in detection of corner cases when the vessel is nearing or about to crossover the maritime boundary, which cannot be marked physically. It is useful for triggering conditions like enabling or disabling fuel injection system, the warning beeps and display notifications to the fishermen. Manual override facility for restarting the engine in case of crossover for limited duration is provided. The security features like authentication for the genuine operator to get access to the engine panel, the support for distress message and the storage of the exact time stamps and GPS locations after encryption in case of initiation of transmitting distress message is provided as a blackbox feature. The passcode based mechanism allows for maximum of three attempts to unlock access to control panel. The GSM modem allows for transmission of distress message to the registered base station/coast guard. The encrypted GPS samples and time stamps are stored in on-chip EEPROM memory for future reference.    <strong></strong></p>

scholarly journals Extending Legacy Industrial Machines by a Low-Cost Easy-to-Use IoT Module for Data Acquisition

Symmetry ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1486
Author(s):  
Laslo Tarjan ◽  
Ivana Šenk ◽  
Jelena Erić Obućina ◽  
Stevan Stankovski ◽  
Gordana Ostojić
Keyword(s):  
Industry 4.0 ◽  
Low Cost ◽  
Control Unit ◽  
Smartphone Application ◽  
Conveyor Belt ◽  
Global Network ◽  
Monitoring And Control ◽  
Variable Frequency Drive ◽  
Automation Systems ◽  
And Control

Industry 4.0 is a paradigm that enhances industrial automation systems with the recent advances in the domain of the Internet of Things (IoT), gaining new possibilities and providing new services. Traditional industrial machines do not have IoT capabilities, and in order to integrate such a machine into Industry 4.0, there is a need for an intermediary device or system that communicates with the machine through its supported communication interfaces and protocols and forwards the communication to the global network. This paper presents the development and experimental validation of a low-cost hardware module that can easily integrate the machine’s existing control unit into the IoT and enable synchronization of the measurements and states of the variables of the machine and its environment with a cloud server. The developed module is universal, can connect to any control unit that is able to communicate through basic RS232 serial communication, and does not require the control unit to have any higher level communication protocol implemented. On the other end, the presented solution uses a dedicated smartphone application to provide remote monitoring and control of the machine through the cloud by using the synchronized variable states, as well as further possibilities for storing, processing, and analyzing the historical data from the system. The developed solution was experimentally validated on an experimental setup consisting of a conveyor belt driven by a three-phase asynchronous electromotor controlled by a programmable logic controller through a variable-frequency drive.

IoT Based Comprehensive Autonomous Home Automation and Security System Using M2M Communication

2020 ◽  
Vol 13 ◽  
Author(s):  
Mesele Worku Ejigu ◽  
Jayagopalan Santhosh
Keyword(s):  
Geographical Location ◽  
Smartphone Application ◽  
Security System ◽  
Cloud Services ◽  
Home Automation ◽  
Security Systems ◽  
Home Appliances ◽  
Alternative Means ◽  
Multiple Alternative ◽  
And Control

Background: In the era of Internet of Things (IoT) automation of home and security systems was becoming remarkably easy. Many research works have been also conducted to bring the most convenient way of automating the home appliances and security systems but insignificant research has been carried out in providing the most comprehensive and autonomous or self-controlled home automation. The aim of this paper is to provide a comprehensive solution to mitigate the existing need. End users can interact with household appliances in a variety of means irrespective of platforms used and their geographical location through smartphone application developed. Using their speech as input users can also operate the electrical appliances via voice commands. In addition to the mobile application and voice command, by integrating some cloud services an attractive web interface would be provided as another alternative for better data presentation and analysis. The autonomous feature would allow the home to monitor and control its environment by itself through installed sensors, sharing data into one another and taking a relevant measurement without a need for human intervention Method: In order to achieve those performances the work will deploy an MQTT (Message Queuing Telemetry Transport) messaging protocol to enable the modules easily communicates one another. Results: Multiple alternative means of controlling and interacting with home appliances was provided. Both autonomous mode and safe mode features would make the system to behave and run autonomously. Conclusion: The paper also embraces the presentation for an application of multiway, cross-platform and user oriented home automation and security system as well as convenient means of controlling and monitoring household electrical appliances.

scholarly journals Telephone Damage Analysis on Voice Control Unit (VCU) At Perum LPPNPI Manado Branch Office

2021 ◽  
Vol 4 (1) ◽  
pp. 47-51
Author(s):  
Adhitya Octavianie ◽  
Aqram Adi Putra
Keyword(s):  
Control Unit ◽  
Control Panel ◽  
Voice Communication ◽  
Control Center ◽  
Voice Control ◽  
Communication Devices ◽  
Screen System ◽  
Branch Office ◽  
Communication Control ◽  
And Control

Voice Communication Control System (VCCS) is a tool designed to make it easier for users to communicate voice by integrating all users (clients) and means of communication in one system and controlled using a control panel. VCCS is a voice switching device used in VHF A / G and Direct Speech communications. The benefit of using VCCS is that when the user makes flight communication it becomes easy because all frequencies and telephones are combined in a VCU (Voice Control Unit) so that the ATC desk/work desk is not filled with communication devices. In addition, to facilitate its use, the VCCS client control panel uses a touch screen system. AirNav Indonesia Manado Branch has a LESS brand VCCS equipment server manufactured by China. VCCS consists of two main parts, namely the server and client. The server is a processing center and control center for switching input and output, while the client or VCU (Voice Control Unit) is the device used by the user in VCCS operations. There are 7 VCUs at AirNav Indonesia Manado which are placed in the Tower room (3 VCU), APP room (3 VCU), and FSS Kompen room (1 VCU).

ADAPTIVE INTEGRATED SECURITY ASSURANCE SYSTEM AS AN ELEMENT OF THE INFRASTRUCTURE OF THE SITUATION CENTER

2020 ◽  
Vol 52 (4) ◽  
pp. 75-84
Author(s):  
MIKHAIL M. PUTYATO ◽  
◽  
ALEXANDER S. MAKARYAN ◽  
ALEXANDER N. CHERKASOV ◽  
IVAN G. GORIN ◽  
...  
Keyword(s):  
Security System ◽  
Software Systems ◽  
Security Model ◽  
Security Systems ◽  
Integration Platform ◽  
Automatic Adaptation ◽  
Situation Center ◽  
And Control ◽  
Modern Technologies

The article deals with the analysis and modeling of an adaptive system for integrated security provision as an element of the infrastructure of the situation center. The constantly changing conditions of the information environment and the global information space dictate the possibility of automated or automatic "adaptation" of security systems to the requirements of modern software systems. The main tasks for organizing the integration of an integrated security system into the situation center system and determining the rules for interaction with functional blocks is the analysis and implementation of various formalized procedures for ensuring integrated security. An adaptive integrated security system is considered as an object that implements the ability to manage and quickly build a security model for a situation center, depending on the problem being solved, or preventing or eliminating an incident. The proposed approach is dictated not only by an increase in the functionality of modern technologies, but also by the requirements for the creation of adaptive integrated solutions that are scalable within the architecture to protect against various types of threats. The use of an integrated security system within the framework of the proposed approach will make it possible to promptly respond to incidents of both external and internal nature, which will allow timely neutralization of the consequences of their influence. An adaptive integrated security system as a common platform will provide timely monitoring, context and control capabilities in various situations. The development of such an integration platform will improve automation and improve the quality of information provided by information security products.

Design and Implementation of Home Security System Acquisition Terminal

2014 ◽  
Vol 631-632 ◽  
pp. 318-321
Author(s):  
Hao Zhang ◽  
Kai Zhu ◽  
Ren Jie Geng
Keyword(s):  
Low Power ◽  
Low Cost ◽  
Modern Society ◽  
Security System ◽  
Security Requirements ◽  
High Tech ◽  
Security Systems ◽  
Home Security ◽  
Terminal Design ◽  
System Acquisition

In modern society, burglaries occur frequently, showing such crimes more high-tech, intelligent trend in recent years. People pay more and more attention to home security. Requirements for home security systems also further improve. In order to establish a sound and reliable home security system, a combination of Zigbee and STM32 terminal acquisition system, achieving low power consumption, data visualization has come true. Compared with traditional alarm systems, this home security terminal design uses new hardware, with smaller volume, easier installation and some data analysis capabilities, making the security system more secure and reliable. The terminals giving a further improve to home security systems, achieving a low cost, low power requirements, have a more broad application prospects and market.

scholarly journals Design and Development of Vehicle Theft Detection, Tracking and Accident Identifier System using IoT

2021 ◽  
Vol 23 (07) ◽  
pp. 420-425
Author(s):  
Tejashwini R ◽  
◽  
Dr. Subodh Kumar Panda ◽  
Keyword(s):  
Low Cost ◽  
Security System ◽  
Alarm System ◽  
Security Systems ◽  
Common People ◽  
Public Places ◽  
Vehicle Theft ◽  
Wide Range ◽  
Vehicle Security ◽  
The Internet Of Things

Vehicle security is one of the major concerns that the entire world is currently experiencing. People generally own automobiles, yet these automobiles are not always secure. Vehicle theft occurs in parking lots, public places, and other unsafe areas. The vehicle’s manufacturer does not consider the vehicle security system to be a factor in the overall cost of the vehicle. Nowadays, only a few vehicles come equipped with high-priced security systems. Door locking, alarm system, GSM, GPS, and other security features are built into high-end vehicles only. There is a necessity to build a low-cost security system for vehicles that common people can afford it and the manufacture can built-in the security system in a wide range of automobiles. This paper proposed a method for vehicle theft detection, tracking, and accident identification using the Internet of Things.

Sign in / Sign up

Export Citation Format

Share Document