Effect of Water-Binder Ratio and Complex Organic-Mineral Additive on Properties of Concrete for Marine Hydrotechnical Constructions

2019 ◽  
pp. 11-21 ◽  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Large Scale ◽  
Concrete Mixture ◽  
Free Calcium ◽  
Relative Deformation ◽  
Regression Equations ◽  
Binder Ratio ◽  
Water Binder Ratio ◽  
Modifying Additive

Large-scale construction of marine structures in the coastal and offshore areas of Vietnam requires the development of new compositions of hydrotechnical concrete and innovative technologies for the preparation of concrete mixes, as well as their transportation to the place of placement. A preliminary composition of heavy concrete was determined and its properties were studied. The effect of the water-binder ratio (W/B) and the effect of using the developed complex organo-mineral modifying additive consisting of fly ash (FA) of Vung Ang TPP, microsilica SF-90 (SF90) and polycarboxylate superplasticizer SR 5000F (SP) on the concrete properties. To process the obtained results, the method of mathematical planning of the experiment with the construction of a four-factor plan was used. As a result of the studies conducted, first-order regression equations were obtained depending on the objective functions - the mobility of the concrete mixture on the cone sediment, the compressive strength of concrete and the deformations of concrete on input factors - x1 (W/B), x2 (amount of SP), x3 (amount of FA) and x4 (amount of SF90). From the obtained regression equations, it follows that the water-binder ratio, as well as the content of superplasticizer, fly ash and microsilica in the composition of the additive have a significant impact on the mobility of concrete mixtures. When reducing W/B and the amount of FA, as well as the increase in the amount of SF90 (x4) concrete compressive strength in 28 days also increases. The result of this study showed the relative deformation of concrete also increases with an increase in the content of FA and reducing W/B and the amount of SF90. At the same time, the effect of the water-binder relationship is most pronounced. It can be assumed that, in the composition of the developed modifying additive, the particles FA and SF90 played the role of a kind of “sliding bearings” between the grains of cement, with which you can control the dispersion of cement and finely dispersed mineral grains in the concrete mixture, and hence its mobility and persistence construction sites in the coastal areas of Vietnam. In addition, SF90, containing 91.65% of amorphous silica, binds free calcium hydroxide to less soluble low-basic calcium silicate silicates, compresses the structure of concrete and increases its compressive strength.

Experimental Study on Workability and Strength of Green High Performance Concrete with High Volume Fly Ash

2013 ◽  
Vol 859 ◽  
pp. 52-55 ◽  
Author(s):  
Yong Qiang Ma
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Ash Content ◽  
Splitting Tensile Strength ◽  
Binder Ratio ◽  
Water Binder Ratio

A great deal of experiments have been carried out in this study to reveal the effect of the water-binder ratio and fly ash content on the workability and strengths of GHPC (green high performance concrete). The workability of GHPC was evaluated by slump and slump flow. The strengths include compressive strength and splitting tensile strength. The results indicate that the increase of water-binder ratio can improve the workability of GHPC, however the strengths of GHPC were decreased with the increase of water-binder ratio. When the fly ash content is lower than 40%, the increase in fly ash content has positive effect on workability of GHPC, while the workability begins to decrease after the fly ash content is more than 40%. The addition of fly ash in GHPC has adverse effect on the strengths, and there is a tendency of decrease in the compressive strength and splitting tensile strength of GHPC with the increase of fly ash content.

scholarly journals EFFECTS OF MIX PROPORTION ON ELECTRICAL RESISTIVITY OF CONCRETE WITH FLY ASH

2017 ◽  
Vol 7 (2) ◽  
pp. 53-65
Author(s):  
Su Wai Hnin ◽  
Pakawat Sancharoen ◽  
Somnuk Tangtermsirikul
Keyword(s):  
Compressive Strength ◽  
Electrical Resistivity ◽  
Fly Ash ◽  
Chloride Penetration ◽  
Mix Proportion ◽  
Binder Ratio ◽  
Saturated Concrete ◽  
Paste Content ◽  
Water Saturated ◽  
Water Binder Ratio

The aim of this paper is to investigate the effects of mix proportion on electrical resistivity of concrete with fly ash. The electrical resistivity of concrete is measured by using four Wenner probes. The varied parameters in this study were water/binder ratio, fly ash content, and paste content. Electrical resistivity of water-saturated concrete at several different ages was studied and compared with compressive strength and rapid chloride penetration. Based on experimental results, a good relationship was obtained between results of compressive strength and rapid chloride penetration with electrical resistivity of concrete. The results of this study can be applied further to predict electrical resistivity of concrete when mix proportions are provided. According to the results, lower water/binder ratio concrete had higher resistivity than those with higher water/binder ratios. When cement was replaced at 40% by fly ash, electrical resistivity increased four times when compared to that of OPC concrete.

An Abrasion Damage of Fly Ash Concretes Previously Subjected to Scaling

2016 ◽  
Vol 258 ◽  
pp. 587-590
Author(s):  
Aneta Nowak-Michta
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Abrasion Resistance ◽  
Air Entrainment ◽  
Binder Ratio ◽  
Abrasion Damage ◽  
Water Binder Ratio ◽  
Class F

Effect of quantity and quality of fly ash and compressive strength of concretes with their addition on abrasion resistance previously subjected to scaling is analyzed in the paper. The abrasion resistance was measured in Böhme test according to EN 1338: 2005. The cement was replaced with 20, 35, and 50% of Class F siliceous fly ash in three categories of losses on ignition A, B and C by mass. The water-binder ratio, the air-entrainment and the workability of mixtures were maintained constant at 0.38, 4,5% and 150 mm respectively.Prior scaling causes a decrease in abrasion resistance of fly ash concretes. In addition, both quantitative and qualitative fly ash parameters and compressive strength have an influence on abrasion damage.

Application of Sulfoaluminate Cement for Solidification/Stabilization of Fly Ash from Municipal Solid Waste Incinerators

2012 ◽  
Vol 178-181 ◽  
pp. 795-798 ◽  
Author(s):  
Qi Na Sun ◽  
Jing Miao Li ◽  
Bao Quan Huo ◽  
Ji Bing Wang
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
High Performance ◽  
Curing Time ◽  
Leaching Toxicity ◽  
Binder Ratio ◽  
Waste Incinerators ◽  
Water Binder Ratio

Sulfoaluminate cement (SAC) was utilized for the solidification/stabilization of fly ash from municipal solid waste (MSW) incinerators. The effects of fly ash amount and water/binder ratio were investigated on compressive strength and heavy metals leaching toxicity of solidified matrices at different curing times. The results showed that prolonged curing time, lower fly ash amount and water/binder ratio enhanced the compressive strength and decreased the leaching concentrations of Zn, Pb and Cu. For 28 days cured matrices with fly ash amount 50% and water/binder ratio 0.30, the compressive strength was 32.6 MPa and the leaching concentrations of Zn, Pb and Cu were 14.73, 0.75 and 0.43 mg/L respectively. The leaching concentrations of Zn, Pb and Cu met the demand of GB 5085.3-2007. SAC is proved to be effective for MSW incinerator fly ash solidification/stabilization and high performance matrices for disposal and reuse may be achieved with further formula optimization.

Influencing Factors of the Fluidity and Strength of Phosphate Concrete

2011 ◽  
Vol 250-253 ◽  
pp. 464-468
Author(s):  
Hong Tao Wang ◽  
Ju Hui Cao ◽  
Shuang Mei Li ◽  
Ming Xue
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Water Retention ◽  
Natural Conditions ◽  
Slump Flow ◽  
Influence Of Water ◽  
Binder Ratio ◽  
Curing Methods ◽  
Early Strength ◽  
Water Binder Ratio

The influence of water binder ratio, content of borax and fly ash on the fluidity and strength of phosphate concrete were investigated. Results showed that the slump and slump flow of phosphate concrete improved with content of water and borax increasing. But the strength decreased, especially early strength. While the mixing amount of borax was less than 1.5% of the magnesium phosphate cement, the influence on later strength was relatively less. The fluidity decreased significantly and the cohesiveness and water retention improved while the content of fly ash was between 10% and 30%.The compressive strength increased while the content of fly ash was 10%.The better curing methods was curing in the natural conditions, the compressive increased with the age prolonged.

Theoretical and Experimental Research on Compressive Strength of High Fly-Ash Content Concrete

2011 ◽  
Vol 477 ◽  
pp. 257-262 ◽  
Author(s):  
Hong Mei Ai ◽  
Li Jiu Wang ◽  
Jing Wei ◽  
Jun Ying Bai ◽  
Pu Guang Lu
Keyword(s):  
Growth Rate ◽  
Compressive Strength ◽  
Fly Ash ◽  
Ash Content ◽  
Theoretical Formula ◽  
Term Strength ◽  
Single Factor ◽  
Binder Ratio ◽  
Water Binder Ratio

Introduced the concept of “Cementitious Coefficient” of fly ash, theoretical formula of strength of HFCC at a certain age was found with two variables: actual water-binder ratio and micro-aggregate-binder ratio. Development regularity of compressive strength of HFCC was studied and formula of long-term strength coefficient D28t was settled. Influence of actual water-binder ratio and micro-aggregate-binder ratio on long-term strength of HFCC was analyzed. Experimental results showed that along with the single-factor increase of actual water-binder ratio and micro-aggregate-binder ratio, growth rate of long-term strength of HFCC increased; influence of actual water-binder ratio was deeper than that of micro-aggregate-binder ratio.

scholarly journals The effect of water binder ratio on strength development of class C fly ash geopolymer mortar prepared by dry geopolymer powder

2019 ◽  
Vol 258 ◽  
pp. 05032 ◽  
Author(s):  
Arie Wardhono
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Calcium Content ◽  
Strength Properties ◽  
Strength Development ◽  
Effect Of Water ◽  
High Calcium ◽  
Binder Ratio ◽  
Geopolymer Binder ◽  
Water Binder Ratio

The use of geopolymer binder as cement replacement material can reduce the amount of carbon dioxide gas produced during the Portland Cement manufacturing process. However, the main issue of geopolymer binder is in the mixing process of sodium silicate and NaOH which requires specialized knowledge and strict supervision. This paper reports the effect of water binder ratio on strength development of fly ash geopolymer mortar using dry geopolymer powder. Fly ash with high calcium content was used as primary material. The dry geopolymer powder was prepared by wet mixing method which was made by drying a mixture of NaOH solution and limestone for 24 hours. The variations of water to binder ratio were 0.30, 0.35, 0.40, 0.45, and 0.50. Strength properties were measured by compressive strength at the age of 7, 14 and 28 days. The results showed that the water binder ratio significantly affect the strength development of geopolymer mortar prepared by dry geopolymer powder. The water binder ratio of 0.40 gives the highest compressive strength of 10.3 MPa at 28 days. This suggests that the use of dry geopolymer powder on geopolymer mortar production can overcome the difficulties of geopolymer mortar mixing on site.

Calculation Model of Compressive Strength of High Fly-AshContent Concrete at Specific Age

2011 ◽  
Vol 261-263 ◽  
pp. 361-365
Author(s):  
Hong Mei Ai ◽  
Jing Wei ◽  
Pu Guang Lu ◽  
Jun Ying Bai
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Calculation Model ◽  
Strength Calculation ◽  
Specific Design ◽  
Design Strength ◽  
Binder Ratio ◽  
Water Binder Ratio

Cementitious coefficient βtwas introduced to reflect the comprehensive effect of fly-ash quality on HFCC strength. On the basis of βt, actual water-binder ratio [W/(C+βtF)] and ash-binder ratio K was proposed, and the strength calculation model of HFCC with specific design age was established. On the basis of economy principal, the formula to determine K was founded. Influence of the design strength of HFCC and βt on K and the content of fly ash was analyzed.

scholarly journals Predicting the Compressive Strength of Portland Cement Concretes with the Addition of Fluidized Bed Combustion Fly Ashes from Bituminous Coal and Lignite

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 753
Author(s):  
Jacek Śliwiński ◽  
Artur Łagosz ◽  
Tomasz Tracz ◽  
Radosław Mróz ◽  
Jan Deja
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Portland Cement ◽  
Fluidized Bed ◽  
Bituminous Coal ◽  
Pozzolanic Reaction ◽  
Fluidized Bed Combustion ◽  
Fly Ashes ◽  
Binder Ratio ◽  
Water Binder Ratio

This paper presents the results of an extensive experimental study on the effect of the addition of two types of fly ash produced during fluidized bed combustion of bituminous coal and lignite, which differ substantially in their chemical and mineral compositions, on the compressive strength of concrete. Concretes with water/binder ratios of 0.65, 0.55 and 0.45 made with CEM I 42.5 R Portland cement and gravel aggregate were tested. The analyzed amounts of fly ash added to the binder were 0, 15% and 30% by weight. Based on the results of compressive strength testing after 28 and 90 days of curing, the relationships with the water/binder ratio and fly ash content in the binder were determined. The fly ashes used were highly active and capable of pozzolanic reaction. The relationships established allow the compressive strength of concretes based on composite cement-fly ash binder to be predicted with sufficient accuracy. The results presented in this study are an important contribution to the knowledge of concretes with combined binders. They have the exploratory value of establishing the dependence of compressive strength at 28 and 90 days on binder composition and water-binder ratio. In addition, they could be used almost directly in practical applications.

scholarly journals Kuat Tekan Beton Mutu Tinggi dengan Memanfaatkan Fly Ash dan Bubuk Kaca Sebagai Bahan Pengisi

2020 ◽  
Vol 20 (01) ◽  
pp. 61-68
Author(s):  
Siska Apriwelni ◽  
Nugraha Bintang Wirawan
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Glass Powder ◽  
Concrete Mixture ◽  
Strength Testing ◽  
Concrete Compressive Strength ◽  
High Quality ◽  
Glass Waste ◽  
Powder Addition ◽  
Compressive Strength Of Concrete

(ID) Penelitian ini membahas pengaruh kuat tekan beton mutu tinggi dengan memanfaatkan limbah fly ash dan limbah kaca. Tujuan dari penelitian ini untuk mengetahui kuat tekan beton pada masing-masing variasi, mengetahui persentase campuran beton untuk menghasilkan kuat tekan maksimum, dan mengetahui apakah fly ash dan serbuk kaca efektif digunakan secara bersamaan sebagai bahan campuran beton. Komposisi fly ash terdiri dari 5 variasi yaitu persentase 0%, 5%, 10%, 15%, dan 20%. Sedangkan untuk komposisi serbuk kaca terdiri dari 2 variasi yaitu persentase 5% dan 10%. Jumlah benda uji 30 buah silinder berukuran diameter 15 cm dan tinggi 30 cm dengan 3 benda uji untuk setiap variasi. Perencanaan campuran beton menggunakan SNI 03-2834-2000 yang dimodifikasi. Pengujian kuat tekan diuji pada umur beton 28 hari. Beton dengan fly ash 0% dan serbuk kaca 10% memiliki kuat tekan paling tinggi dibandingkan dengan beton dengan tambahan fly ash, yaitu 46,77%. Selain itu, dapat disimpulkan bahwa semakin bertambahnya jumlah persentase serbuk kaca yang digunakan menunjukkan bahwa kuat tekan beton semakin bertambah juga. Penambahan fly ash pada campuran beton mempengaruhi kuat tekan beton yang dihasilkan. Pada variasi fly ash 0% memiliki kuat tekan tertinggi baik pada saat campuran serbuk kaca 5%dan 10%. Variasi fly ash 15% adalah kondisi optimum campuran beton dengan kuat tekan beton yaitu 43,31 Mpa. Kedua limbah ini dapat dikombinasikan dan dimanfaatkan dengan baik dan digunakan dalam pembuatan beton mutu tinggi. (EN) This study discusses the effect of high quality concrete by utilizing fly ash and glass waste. The purpose of this study is to determine the compressive strength of concrete in each variation, to determine the contribution of concrete to produce compressive strength, and to find out that fly ash and glass powder are effectively used in full as a concrete admixture. Fly ash composition consists of 5 variations, namely the percentage of 0%, 5%, 10%, 15%, and 20%. While for the composition of glass powder consists of 2 variations, namely the percentage of 5% and 10%. The number of specimens is 30 cylinders with a diameter of 15 cm and a height of 30 cm with 3 specimens for each variation. Concrete mixture planning using SNI 03-2834-2000 was developed. Compressive strength testing on concrete age 28 days. Concrete with 0% fly ash and 10% glass powder have the highest compressive strength compared to concrete with additional fly ash, which is 46.77%. In addition, it can increase the amount of glass powder addition that is used to show the concrete compressive strength is increasing as well. The addition of fly ash in the concrete mixture has an effect on the compressive strength of the concrete produced. In the variation of 0% fly ash has the highest compressive strength when the glass powder mixture of 5% and 10%. The 15% fly ash variation is the optimal concrete mixture with compressive strength of 43.31 MPa. These two wastes can be combined and utilized properly and are used in making high quality concrete.  

Sign in / Sign up

Export Citation Format

Share Document