scholarly journals Thermal Performance of Oil Palm Fibre and Paper Pulp as the Insulation Materials

2014 ◽  
Vol 5 (2) ◽  
pp. 22-28
Author(s):  
S.H. Ibrahim ◽  
Sia W.K. ◽  
A. Baharun ◽  
M.N.M. Nawi ◽  
R. Affandi
Keyword(s):  
Thermal Conductivity ◽  
Thermal Performance ◽  
Oil Palm ◽  
Total Density ◽  
Insulation Material ◽  
Paper Pulp ◽  
Particle Board ◽  
Environment Impact ◽  
Palm Fiber ◽  
Insulation Materials

 Energy consumption for residential use in Malaysia is keep increasing yearly in order to maintain the internal thermal comfort of the building. Roof insulation material plays a vital role in improving the thermal comforts of the building while reduce the cooling load of the building. Oil palm industry in Malaysia had grown aggressively over the past few decades. Tons of oil palm waste had produced during the process such as empty fruit bunch fiber. Another waste material that available and easy to obtain is paper. Paper is a valuable material that can be recycled. Waste paper comes from different sources such as newspaper, office and printing papers. This study will take advantage of the available resources which could contribute to reduce the environment impact. The aim of this study is to investigate the thermal performance of roof insulation materials using mixture of oil palm fiber and paper pulp with different ratio and thickness. This study found that the thermal performance of the paper pulp is slightly better compare to the oil palm fiber. Thermal conductivity of the particle board reduces around 4.1% by adding the 10% of paper pulp into the total density of the particle board. By adding 75% of paper pulp, the thermal conductivity of the particle board could be reduced to 24.6% compare to the oil palm fiber board under the similar condition. Therefore, from this study, it could be concluded that paper pulp has high potential to be used as a building insulation material.

scholarly journals Technical Performance Overview of Bio-Based Insulation Materials Compared to Expanded Polystyrene

Buildings ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 81
Author(s):  
Cassandra Lafond ◽  
Pierre Blanchet
Keyword(s):  
Thermal Conductivity ◽  
Energy Efficiency ◽  
Natural Fibers ◽  
Expanded Polystyrene ◽  
Embodied Energy ◽  
Lower Amount ◽  
Vapor Permeability ◽  
Insulation Material ◽  
Insulation Materials ◽  
Technical Performance

The energy efficiency of buildings is well documented. However, to improve standards of energy efficiency, the embodied energy of materials included in the envelope is also increasing. Natural fibers like wood and hemp are used to make low environmental impact insulation products. Technical characterizations of five bio-based materials are described and compared to a common, traditional, synthetic-based insulation material, i.e., expanded polystyrene. The study tests the thermal conductivity and the vapor transmission performance, as well as the combustibility of the material. Achieving densities below 60 kg/m3, wood and hemp batt insulation products show thermal conductivity in the same range as expanded polystyrene (0.036 kW/mK). The vapor permeability depends on the geometry of the internal structure of the material. With long fibers are intertwined with interstices, vapor can diffuse and flow through the natural insulation up to three times more than with cellular synthetic (polymer) -based insulation. Having a short ignition times, natural insulation materials are highly combustible. On the other hand, they release a significantly lower amount of smoke and heat during combustion, making them safer than the expanded polystyrene. The behavior of a bio-based building envelopes needs to be assessed to understand the hygrothermal characteristics of these nontraditional materials which are currently being used in building systems.

Preparation and Properties of Ultrafine Glass Wool by Centrifugal Blowing

2011 ◽  
Vol 148-149 ◽  
pp. 116-120
Author(s):  
Jin Lian Qiu ◽  
Zhao Feng Chen ◽  
Jie Ming Zhou ◽  
Jian Wang ◽  
Bin Bin Li ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Glass Fiber ◽  
Average Diameter ◽  
Glass Wool ◽  
Insulation Material ◽  
Insulation Materials ◽  
Materials Engineering ◽  
Acoustic Insulation ◽  
Fiber Reinforcements ◽  
Predominant Process

Due to extremely low thermal conductivity, high modulus, high toughness, light weight and non-combustible property, ultrafine glass wool can be widely used as glass fiber reinforcements in composites, thermal insulation materials, acoustic insulation materials, engineering materials, construction, infrastructure and environmental protection projects and so on. In particular, as a insulation material, glass wool exhibits unique advantages. The predominant process of glass wool is centrifugal blowing process. This paper describes a study of the relationship between the diameter of ultrafine glass fiber and thermal conductivity. The thermal conductivity of ultrafine glass wool decreases with the decrease of average diameter.

Effect of Operating Temperatures on Thermal Conductivity of Polystyrene Insulation Material: Impact on Envelope-Induced Cooling Load

2014 ◽  
Vol 564 ◽  
pp. 315-320 ◽  
Author(s):  
Maatouk Khoukhi ◽  
Mahmoud Tahat
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Energy Performance ◽  
Building Envelope ◽  
Insulation Material ◽  
Cooling Load ◽  
Thermal Insulation Material ◽  
Insulation Materials ◽  
Energy Performance Of Buildings ◽  
The Impact

The impact of the thermal conductivity (k-value) change of polystyrene insulation material in building envelope due to changes in temperature on the thermal and energy performance of a typical residential building under hot climate is investigated. Indeed, the thermal and energy performance of buildings depends on the thermal characteristics of the building envelope, and particularly on the thermal resistance of the insulation material used. The thermal insulation material which is determined by its thermal conductivity, which describes the ability of heat to flow cross the material in presence of a gradient of temperature, is the main key to assess the performance of the thermal insulation material. When performing the energy analysis or calculating the cooling load for buildings, we use published values of thermal conductivity of insulation materials, which are normally evaluated at 24°C according to the ASTM standards. In reality, thermal insulation in building is exposed to significant and continuous temperature variations, due essentially to the change of outdoor air temperature and solar radiation. Many types of insulation materials are produced and used in Oman, but not enough information is available to evaluate their performance under the prevailing climatic condition. The main objective of this study is to investigate the relationship between the temperature and thermal conductivity of various densities of polystyrene, which is widely used as building insulation material in Oman. Moreover, the impact of thermal conductivity variation with temperature on the envelope-induced cooling load for a simple building model is discussed. This work will serve as a platform to investigate the effect of the operating temperature on thermal conductivity of other building material insulations, and leads to more accurate assessment of the thermal and energy performance of buildings in Oman.

scholarly journals Effect of egg white, perlite, gypsum and fly ash in environment friendly insulation materials

2018 ◽  
Vol 16 (3) ◽  
pp. 329-342
Author(s):  
Hanifi Binici ◽  
Orhan Aksogan ◽  
Rifat Resatoglu
Keyword(s):  
Thermal Conductivity ◽  
Fly Ash ◽  
Absorption Coefficient ◽  
Egg White ◽  
Radiation Hazard ◽  
Binding Property ◽  
Insulation Material ◽  
Linear Absorption Coefficient ◽  
Linear Absorption ◽  
Insulation Materials

In this study, engineering features of insulation materials produced from egg white, perlite, gypsum and fly ash were investigated. Densities, water absorption ratios, ultrasonic velocities and thermal conductivity coefficients of samples were determined. Furthermore, linear absorption coefficient were measured by gamma ray saturation levels at 17.7, 26 and 60 keV energies. Thermal conductivity coefficients of the produced composites were found to be in the range 0.0882- 0.0995 Kcal/mh?C. Egg white decreased the linear absorption coefficients. Unit weights of samples were found to be dependent on their contents. As gypsum rate increased, unit weight also increased. As perlite rate increased thermal conductivity coefficient decreased. As egg white decreased the linear absorption coefficient decreased, also. The most important benefits of these types of materials are their being impermeable and perfectly compatible with the environment. These lighter type materials were/are compatible with Turkey and the Middle East environment. Egg white has been resistant to radiation. Hence, it is highly compatible with the environment. The compressive and flexural strengths of mortars decreased with the use of egg whites in mortar. So, egg white enhances the binding property of samples. In most cases, some organic and/or inorganic additives are used as well, to improve the physical and mechanical properties of mortar, such as egg whites and others. Finally, this study shows that it is possible to produce an insulation material resistant to sound and radiation by using egg white, perlite and fly ash. It is seen that the samples incorporating egg white could be used at hospitals, military and industrial facilities and shelters which are under radiation hazard. Furthermore, this insulation materials will be put to use in industry in Turkey after many experiments have been done on laboratory.

scholarly journals Thermal Characterization of a New Bio-Based Insulation Material Containing Puffed Rice

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5700
Author(s):  
Maatouk Khoukhi ◽  
Abeer Dar Saleh ◽  
Ahmed Hassan ◽  
Shaimaa Abdelbaqi
Keyword(s):  
Thermal Conductivity ◽  
Thermal Characterization ◽  
Insulation Material ◽  
Optimal Range ◽  
Insulation Materials ◽  
Material Optimization ◽  
Sample Amount ◽  
Puffed Rice ◽  
Influential Parameters

Although many advanced insulation materials have been recently developed, very few are eco-friendly and their production requires a substantial amount of energy and complex manufacturing processes. To address this issue, a bio-based thermal insulation material was developed using short- and long-grained puffed rice. A set of experiments was subsequently carried out to identify the best rice type and the optimal range for the most influential parameters (sample amount, temperature, and moisture level). Our findings revealed that short-grained rice exhibited greater puffing ability and was thus adopted in further material optimization experiments. These assessments indicated that the most optimal thermal conductivity of the insulation material and the highest puffing ratio was attained at 12–15% moisture, 260–270 °C temperature, and 15–18 g sample weight. The thermal properties, including thermal conductivity and fire reaction, and thermal performance of samples obtained using these parameters were similar to those of common insulation materials.

Development of Thermal Insulation from Oil Palm Fiber for Chimney of Fire Tube Steam Packaged Boiler

2014 ◽  
Vol 666 ◽  
pp. 31-35
Author(s):  
Suhaimi Hassan ◽  
Hussain Hamoud Al-Kayiem ◽  
Abuzar Ghaffari
Keyword(s):  
Thermal Conductivity ◽  
Temperature Gradient ◽  
Packing Density ◽  
Oil Palm ◽  
Environmental Benefits ◽  
Palm Fiber ◽  
Thermal Insulator ◽  
Temperature Ranges ◽  
Palm Oil Mill ◽  
The Cost

In this study, an investigation was conducted to develop oil palm fiber from palm oil mill waste as a thermal insulator. The experimental study focused on comparisons of thermal conductivity and temperature gradient or difference between the existing commercial rockwool and the produced oil palm fiber as a thermal insulator for a chimney of steam packaged boiler. The experiments were conducted at different temperature ranges and packing density. The values of the measured thermal conductivity were found to be 0.02 W/m·K to 0.112 W/m·K for a packing density of 78, 96 and 112 kg/m3, and at a temperatures between 40 oC to 90 oC. The value of the thermal conductivity of the oil palm fiber showed an increase at higher temperatures and greater temperature gradient as compared to the rockwool insulator. Although not being able to match the values at higher temperatures and temperature difference, other factors such as the cost and the environmental benefits of using oil palm waste material should be taken into consideration and hence encouraging its use as at least a supplement to existing insulation materials.

Comparative Analysis of the Use of Thermal Insulation Materials Depending on Climatic Conditions and Comfort Microclimate Supply Systems

2022 ◽  
Vol 906 ◽  
pp. 99-106
Author(s):  
Siranush Egnatosyan ◽  
David Hakobyan ◽  
Spartak Sargsyan
Keyword(s):  
Energy Efficiency ◽  
Comparative Analysis ◽  
Thermal Insulation ◽  
Thermal Performance ◽  
Climatic Conditions ◽  
Insulation Material ◽  
Insulation Layer ◽  
Transfer Resistance ◽  
Insulation Materials ◽  
Wide Range

The use of thermal insulation materials to reduce the heating and cooling demand of the building in order to provide energy efficiency is the main solution. But there is a wide range of these products on the market and, therefore, the choice and application of these materials is a rather difficult task, since many factors must be taken into account, such as environmental safety, cost, durability, climatic conditions, application technology, etc. Basically, comfort microclimate systems are designed based on normative standards, where the thickness of the thermal insulation material is selected depending on the required heat transfer resistance. These values are calculated taking into account climate conditions, that is the duration of the heating period, as well as taking into account sanitary and hygienic requirements. This article discusses the thermal performance of building materials, and also provides a comparative analysis of the use of thermal insulation materials depending on climatic factors and on the system providing comfort microclimate. Based on the calculations by mathematical modeling and optimization, it is advisable to choose the thickness of the thermal insulation, taking into account the capital and operating costs of the comfort microclimate systems. Comparing the optimization data with the normative one, the energy efficiency of the building increases by 50-70% when applying the optimal thickness of the thermal insulation layer, and when the thermal insulation layer is increased, the thermal performance of the enclosing structures has improved by 30%, which contributes to energy saving.

Thermal Performance Evaluation of Textile Waste as an Alternative Solution for Heat Transfer Reduction in Buildings

2018 ◽  
Vol 140 (2) ◽  
Author(s):  
Ayoub Gounni ◽  
Mohamed El Wazna ◽  
Mustapha El Alami ◽  
Abdeslam El Bouari ◽  
Omar Cherkaoui ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Surface Temperature ◽  
Thermal Insulation ◽  
Thermal Performance ◽  
Air Permeability ◽  
Heat Fluxes ◽  
Insulation Material ◽  
Potential Applicability ◽  
Building Walls ◽  
Wall Surface Temperature

The potential applicability of a developed recycled textile material, based on acrylic spinning waste, as thermal insulation is conducted. The prepared acrylic spinning waste (AS) is thermo-physically characterized in terms of density, air permeability, and thermal conductivity. The results show that the density and air permeability are 10.583 kg/m3 and 1100 L/m2/s, respectively. In addition, the thermal conductivity is found to be 38.27 mW/(m K). The developed thermal insulator is then tested in a thermally controlled reduced scale cavity. Two walls of the cavity are outfitted with AS at two different locations and compared to the walls without AS. The comparison is made based on the wall surface temperature and heat flux. A reduction in surface temperature is observed in the walls outfitted with AS, compared to wall without AS. Indeed, compared to a control wall, the peak heat fluxes are reduced by 27.23% and 18.67%, respectively, related to the walls with AS at location 1 and location 2. The obtained results show that the AS is a competitive thermal insulation material and can increase the thermal performance of the building walls.

Review on Reinforcement of Aerogel for Development of Advanced Nano Insulation Material for Application in Sustainable Buildings

2014 ◽  
Vol 699 ◽  
pp. 277-282 ◽  
Author(s):  
Nadzhratul Husna Ahmad Puad ◽  
Mohd Faris Khamidi ◽  
Khairun Azizi Azizli ◽  
Syed Ahmad Farhan
Keyword(s):  
Thermal Conductivity ◽  
Mechanical And Thermal Properties ◽  
Insulation Material ◽  
Fibre Glass ◽  
Sustainable Buildings ◽  
Existing Building ◽  
Air Conditioners ◽  
Insulation Materials ◽  
Building Insulation ◽  
Research Gap

Installation of insulation materials in buildings can reduce the usage of air conditioners by retarding heat flow into the building. Aerogel is one of the best insulation materials with distinctive properties that can replace existing building insulation materials such as fibre glass and polyurethane. However, brittleness of Aerogel makes it difficult to handle and disqualifies its viability as a building insulation material. Reinforcement of Aerogel with binding materials can improve its mechanical and thermal properties to overcome its brittleness. However, only a few studies have been carried out on this area. Furthermore, from the few existing studies, vital information such as thermal conductivity and specific application of the reinforced Aerogel studied were not considered. As an initiative to fill in this research gap, a review on reinforcement of Aerogel is presented.

Effect of Material Constitution on the Properties of Thermal Insulation Materials

2014 ◽  
Vol 541-542 ◽  
pp. 141-145
Author(s):  
Bo Liu ◽  
Shou De Wang ◽  
Shuai Yang ◽  
Chen Chen Gong ◽  
Ling Chao Lu
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Cementitious Materials ◽  
Cellulose Ether ◽  
Dry Density ◽  
Ratio Test ◽  
Insulation Material ◽  
Material Constitution ◽  
Insulation Materials

Cement-based foam insulation board is a lightweight thermal insulation and have a characteristic of energy saving. The effects of material constitution on the properties of mechanical properties, dry densityand thermal conductivity for thermal insulation materials. The subject of fast hardening sulphoaluminate cement as cementitious materials, polystyrene particles as a lightweight thermal insulation material, adding a certain amount of water reducer, cellulose ethers, air entraining agent to make thermal insulation materials. The experimental results shows that the appropriate material constitution is following: the cement-bead ratio is 12, the ratio is 0.65, the water-cement ratio is 0.4, the content of water reducer is 0.5%, the content of cellulose ether is 0.4%, the content of the air entraining agent is 0.4% .This mix ratio test of mechanical properties are: flexural strength is 0.72MPa, compressive strength is 1.24MPa, dry density is 375kg/m3, water content is 2.3%, water absorption is 10.8%, softening coefficient is 0.95 and coefficient of thermal conductivity is 0.053 W/ (m K).

Sign in / Sign up

Export Citation Format

Share Document