scholarly journals Soil Degassing From the Xianshuihe–Xiaojiang Fault System at the Eastern Boundary of the Chuan–Dian Rhombic Block, Southwest China

2021 ◽  
Vol 9 ◽  
Author(s):  
Yutao Sun ◽  
Xiaocheng Zhou ◽  
Yucong Yan ◽  
Jingchao Li ◽  
Wenya Fang ◽  
...  
Keyword(s):  
Hot Spring ◽  
Middle Part ◽  
Soil Gas ◽  
Fault System ◽  
The Tibetan Plateau ◽  
Seismic Zone ◽  
Fault Activity ◽  
Eastern Boundary ◽  
Soil Degassing ◽  
Xiaojiang Fault

The Chuan–Dian region, situated in the middle part of the north-south seismic zone of mainland China in a highly deformed area of the eastern margin of the Tibetan Plateau, is one of the principal areas for monitoring earthquake activities in China. In this study, the geochemical characteristics of soil degassing (of CH4, H2, CO2, Rn, and Hg) and, the relationship between degassing and fault activity, were investigated in the Xianshuihe–Xiaojiang fault system (XXFS) at the eastern boundary of the Chuan–Dian rhombic block. The mean soil-gas concentrations of CH4, H2, CO2, Rn, and Hg in the XXFS were 8.1 ppm, 9.9 ppm, 0.5%, 15.1 kBq/m3 and 12.9 ng/m3, respectively. The δ13CCO2 and δ13CCH4 values of the hot-spring gases varied from −11.9‰ to −3.7‰ and −62.5‰ to 17‰, respectively. The He-C isotopic ratios indicate that the carbon in the northern and middle parts of the XXFS may have originated from deep fluids, whereas the carbon in the southern part of the XXFS is of organic origin. The high concentrations of soil gas were distributed near the faults, indicating that the faults could act as channels for gas migration. The distributions of the high soil-gas concentrations in the XXFS coincide with the highest stress and maximum strain rates, indicating that the fault activity enhanced permeability and increased the emission rates of the gases. The results of this study will be helpful for degassing in active fault zones and earthquake monitoring.

scholarly journals Hydrogeochemical Characteristics of Hot Springs and Their Short-Term Seismic Precursor Anomalies along the Xiaojiang Fault Zone, Southeast Tibet Plateau

Water ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 2638
Author(s):  
Chenhua Li ◽  
Xiaocheng Zhou ◽  
Yucong Yan ◽  
Shupei Ouyang ◽  
Fengli Liu
Keyword(s):  
Fault Zone ◽  
Meteoric Water ◽  
Hot Springs ◽  
Hot Spring ◽  
Epicentral Distance ◽  
Tibet Plateau ◽  
The Tibetan Plateau ◽  
Short Term ◽  
Seismic Precursor ◽  
Xiaojiang Fault

Significant hydrogeochemical changes may occur prior- and post-earthquakes. The Xiaojiang fault zone (XJF), situated in a highly deformed area of the southeastern margin of the Tibetan Plateau, is one of the active seismic areas. In this study, major and trace elements, and hydrogen and oxygen isotopes of 28 sites in hot springs along the XJF were investigated from June 2015 to April 2019. The meteoric water acts as the primary water source of the hot spring in the XJF and recharged elevations ranged from 1.8 to 4.5 km. Most of the hot spring water in the study area was immature water and the water–rock reaction degree was weak. The temperature range was inferred from an equation based on the SiO2 concentration and chemical geothermal modeling: 24.3~96.0 °C. The circulation depth for the springs was estimated from 0.45 to 4.04 km. We speculated the meteoric water firstly infiltrated underground and became heated by heat sources, and later circulated to the earth’s surface along the fault and fracture and finally constituted hot spring recharge. Additionally, a continuous monitoring was conducted every three days in the Xundian hot spring since April 2019, and in Panxi and Qujiang hot springs since June 2019. There were short-term (4–35 d) seismic precursor anomalies of the hydrochemical compositions prior to the Xundian ML4.2, Dongchuan ML4.2, and Shuangbai ML5.1 earthquakes. The epicentral distance of anomalous sites ranged from 19.1 to 192.8 km. The anomalous amplitudes were all over 2 times the anomaly threshold. The concentrations of Na+, Cl−, and SO42− are sensitive to the increase of stress in the XJF. Modeling on hydrology cycles of hot springs can provide a plausible physicochemical basis to explain geochemical anomalies in water and the hydrogeochemical anomaly may be useful in future earthquake prediction research of the study area.

scholarly journals Latest Quaternary Active Faulting and Paleoearthquakes on the Southern Segment of the Xiaojiang Fault Zone, SE Tibetan Plateau

Lithosphere ◽  
2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Peng Guo ◽  
Zhujun Han ◽  
Shaopeng Dong ◽  
Zebin Mao ◽  
Nan Hu ◽  
...  
Keyword(s):  
Tibetan Plateau ◽  
Fault Zone ◽  
Dominant Role ◽  
Fault System ◽  
Tectonic Deformation ◽  
Time Interval ◽  
The Tibetan Plateau ◽  
Lateral Extrusion ◽  
The Right ◽  
Xiaojiang Fault

Abstract The Xiaojiang fault zone (XJFZ) is an important part of the Xianshuihe-Xiaojiang fault system, acting as the eastern boundary of the Chuan-Dian block on the southeastern margin of the Tibetan Plateau and accommodating the lateral extrusion of the block. The faulting activity and paleoseismic history on the southern segment of the XJFZ remain poorly understood. Here, trench excavations and radiocarbon dating revealed that four recent surface-rupturing paleoearthquakes have occurred on the Jianshui fault (JSF) in the southern segment of the XJFZ since ~15370 yr BP. The ages of these events, labeled E4-E1 from oldest to youngest, are limited to the following time ranges: 15360-12755, 10845-6900, 1455-670, and 635-145 yr BP, respectively. The most recent event E1 was most likely the 1606 Jianshui earthquake. These events appear to occur unregularly in time. The time interval between the last two events is 726±235 yr, and the average recurrence interval for all four events is 4589±3132 yr. The deformed strata show that the JSF is characterized kinematically by transtension, which likely respond to the apparent change in the direction of clockwise rotation of the Chuan-Dian block around the eastern Himalayan syntaxis. Combined with the analysis of the neighboring NW-striking faults, our study suggests that the south-southeastward motion of the Chuan-Dian block is likely to be firstly accommodated in part by the right-lateral shear and dip-slip motions of the Qujiang and Shiping faults and continues across the Red River fault zone, then is transmitted southward along the Dien Bien Phu fault. Therefore, the southern segment of the XJFZ plays a dominant role in the tectonic deformation of the southeastern Chuan-Dian block, with a high seismic hazard.

scholarly journals Spatial-Temporal Patterns and Controls of Evapotranspiration across the Tibetan Plateau (2000–2012)

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Hao Zhang ◽  
Jian Sun ◽  
Junnan Xiong
Keyword(s):  
Tibetan Plateau ◽  
Environmental Factors ◽  
Vegetation Type ◽  
Middle Part ◽  
Rate Of Change ◽  
Ecological Indicator ◽  
The Tibetan Plateau ◽  
Grassland Ecosystems ◽  
Key Factor ◽  
Positive Correlations

Evapotranspiration (ET) is a key factor to further our understanding of climate change processes, especially on the Tibetan Plateau, which is sensitive to global change. Herein, the spatial patterns of ET are examined, and the effects of environmental factors on ET at different scales are explored from the years 2000 to 2012. The results indicated that a steady trend in ET was detected over the past decade. Meanwhile, the spatial distribution shows an increase of ET from the northwest to the southeast, and the rate of change in ET is lower in the middle part of the Tibetan Plateau. Besides, the positive effect of radiation on ET existed mainly in the southwest. Based on the environment gradient transects, the ET had positive correlations with temperature (R>0.85, p<0.0001), precipitation (R > 0.89, p < 0.0001), and NDVI (R > 0.75, p < 0.0001), but a negative correlation between ET and radiation (R = 0.76, p < 0.0001) was observed. We also found that the relationships between environmental factors and ET differed in the different grassland ecosystems, which indicated that vegetation type is one factor that can affect ET. Generally, the results indicate that ET can serve as a valuable ecological indicator.

scholarly journals Linking deeply-sourced volatile emissions to plateau growth dynamics in southeastern Tibetan Plateau

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Maoliang Zhang ◽  
Zhengfu Guo ◽  
Sheng Xu ◽  
Peter H. Barry ◽  
Yuji Sano ◽  
...  
Keyword(s):  
Tibetan Plateau ◽  
Growth Dynamics ◽  
High Elevation ◽  
Fault System ◽  
The Tibetan Plateau ◽  
Southeastern Tibetan Plateau ◽  
Surface Uplift ◽  
Multi Stage ◽  
Geodynamic Processes ◽  
Underlying Mechanisms

AbstractThe episodic growth of high-elevation orogenic plateaux is controlled by a series of geodynamic processes. However, determining the underlying mechanisms that drive plateau growth dynamics over geological history and constraining the depths at which growth originates, remains challenging. Here we present He-CO2-N2 systematics of hydrothermal fluids that reveal the existence of a lithospheric-scale fault system in the southeastern Tibetan Plateau, whereby multi-stage plateau growth occurred in the geological past and continues to the present. He isotopes provide unambiguous evidence for the involvement of mantle-scale dynamics in lateral expansion and localized surface uplift of the Tibetan Plateau. The excellent correlation between 3He/4He values and strain rates, along the strike of Indian indentation into Asia, suggests non-uniform distribution of stresses between the plateau boundary and interior, which modulate southeastward growth of the Tibetan Plateau within the context of India-Asia convergence. Our results demonstrate that deeply-sourced volatile geochemistry can be used to constrain deep dynamic processes involved in orogenic plateau growth.

The interrelationship between electrical resistivity and VP/VS ratio: A novel approach to constrain the subsurface resistivity structure in data gap areas in a seismogenic zone

Geophysics ◽  
2021 ◽  
pp. 1-44
Author(s):  
Ujjal K. Borah ◽  
Prasanta K. Patro
Keyword(s):  
Electrical Resistivity ◽  
A Priori ◽  
Fault Zones ◽  
Middle Part ◽  
Seismogenic Zone ◽  
Earth Model ◽  
Seismic Zone ◽  
S Wave ◽  
Data Gap ◽  
Earthquake Zone

Large man-made water-reservoirs promote fluid diffusion and cause critically stressed fault zones underneath to trigger earthquakes. Electrical resistivity is a crucial property to investigate such fluid-filled fault zones. We, therefore, carry out magnetotelluric (MT) investigation to explore an intra-plate earthquake zone, which is related to artificial reservoir triggered seismicity. However, due to surface access restrictions, our dataset has a gap in coverage in the middle part of the study area. This data gap region coincides with the earthquake hypocenter distribution in that intra-plate earthquake zone. Therefore, it is vital to fill the data gap to get the electrical signature of the active seismic zone. To compensate for the data gap, we develop a relation that connects resistivity with the ratio of seismic P- to S-wave velocity ( VP/ VS). Utilizing this relation, we estimate a priori resistivity distribution in the data gap region from known vp/vs values during inversion to compensate for the data gap. A comparison study of the root mean square (RMS) misfits of inversion outputs (with and without data gap filled) proves the effectiveness of the established relation. The inversion outputs obtained using the established relation brings out fault signatures in the data gap region. To examine the reliability and accuracy of these fault signatures, we occupy a portion of the data gap with new MT sites. We compare the inversion output from this new setup with the inversion output obtained from the established relation and observe that the electrical signatures in both outputs are spatially correlated. Further, a synthetic test on a similar earth model establishes the credibility and robustness of the derived relation.

Sequential modelling of the 2016 Central Italy earthquake cluster using multisource satellite observations and quantitative assessment of Coulomb stress change

2020 ◽  
Vol 221 (1) ◽  
pp. 451-466 ◽  
Author(s):  
Qian Xu ◽  
Qiang Chen ◽  
Jingjing Zhao ◽  
Xianwen Liu ◽  
Yinghui Yang ◽  
...  
Keyword(s):  
Surface Deformation ◽  
Central Italy ◽  
Normal Fault ◽  
Satellite Observations ◽  
Fault System ◽  
Potential Zone ◽  
Seismic Zone ◽  
Seismogenic Fault ◽  
Positive Effects ◽  
Sequence Of Events

SUMMARY A sequence of earthquake events consisting of three large shocks occurred in Central Italy from August to October in 2016 with the duration of almost 2 months. The preliminary study on the seismic mechanism suggests that the sequence of events is the result from the activity of the SW dipping Mt Bove–Mt Vettore–Mt Gorzano normal fault system. For investigation and understanding of the coseismic faulting of the seismogenic fault alignment, we collect a set of comprehensive satellite observations including the Sentinel-1A, ALOS-2/PALSAR-2 and GPS data to map the coseismic surface deformation and estimate the source models in this study. The derived faulting model for the first Amatrice event is characterized by two distinct slip asperities suggesting that it is a predominantly normal dip-slip motion with slight strike-slip component. The second event, Visso earthquake is almost a purely normal rupture. The third Norcia event is dominated by the normal dip-slip rupture of the seismogenic fault, and has propagated up to the ground with significant slip. The three faulting models are then utilized to quantify the Coulomb failure stress (CFS) change over the seismic zone. First, the CFS change on the subsequent two seismogenic faults of the earthquake sequence is estimated, and the derived positive CFS change induced by the preceding earthquakes suggests that the early events have positive effects on triggering the subsequent seismicity. We then explore the response relation of the aftershocks including 961 events with magnitudes larger than M 3.0 to the CFS change over the seismic zone. It suggests that the rupture pattern of the aftershocks is similar to the major shocks with predominantly normal dip-slip. To assess the risk of the future seismic hazard, we analyse quantitatively the spatial distribution of aftershock occurrence and CFS transfer at the seismogenic depth, indicating that the ruptures of the three major shocks do partly release the accumulated strain on the associated fault alignment as well as the dense aftershock, but the CFS increase zone with few aftershocks in the southwest of the eastern Quaternary fault alignment of Central Italy poses the potential of further rupture. In particular, the distribution of aftershock migration also suggests that the north extension of the Mt Bove fault is the potential zone with rupture risk.

Sign in / Sign up

Export Citation Format

Share Document