scholarly journals Performance Evaluation of GIS-Based Novel Ensemble Approaches for Land Subsidence Susceptibility Mapping

2021 ◽  
Vol 9 ◽  
Author(s):  
Alireza Arabameri ◽  
Saro Lee ◽  
Subodh Chandra Pal ◽  
Omid Asadi Nalivan ◽  
Asish Saha ◽  
...  
Keyword(s):  
Land Subsidence ◽  
Spatial Prediction ◽  
Susceptibility Mapping ◽  
Support Vector ◽  
Ann Model ◽  
Susceptibility Maps ◽  
Future Prediction ◽  
Characteristic Area ◽  
Artificial Neural Network Ann ◽  
And Behavior

The optimal prediction of land subsidence (LS) is very much difficult because of limitations in proper monitoring techniques, field-base surveys and knowledge related to functioning and behavior of LS. Thus, due to the lack of LS susceptibility maps it is almost impossible to identify LS prone areas and as a result it influences severe economic and human losses. Hence, preparation of LS susceptibility mapping (LSSM) can help to prevent natural and human catastrophes and reduce the economic damages significantly. Machine learning (ML) techniques are becoming increasingly proficient in modeling purpose of such kinds of occurrences and they are increasing used for LSSM. This study compares the performances of single and hybrid ML models to preparation of LSSM for future prediction of performance analysis. In this study, the spatial prediction of LS was assessed using four ML models of maximum entropy (MaxEnt), general linear model (GLM), artificial neural network (ANN) and support vector machine (SVM). Alongside, the possible numbers of novel ensemble models were integrated through the aforementioned four ML models for optimal analysis of LSSM. An inventory LS map was prepared based on the previous occurrences of LS points and the dataset were divvied into 70:30 ratios for training and validating of the modeling process. To identify the robust and best LSSMs, receiver operating characteristic-area under curve (ROC-AUC) curve was employed. The ROC-AUC result indicated that ANN model gives the highest ROC-AUC (0.924) in training accuracy. The highest AUC (0.823) of the LSSMs was determined based on validation datasets identified by SVM followed by ANN-SVM (0.812).

scholarly journals Simulating the Stress-Strain Relationship of Geomaterials by Support Vector Machine

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Hongbo Zhao ◽  
Zenghui Huang ◽  
Zhengsheng Zou
Keyword(s):  
Support Vector Machine ◽  
Constitutive Relationship ◽  
Support Vector ◽  
Nonlinear Relationship ◽  
Ann Model ◽  
Stress Strain ◽  
Svm Model ◽  
Strain Relationship ◽  
Artificial Neural Network Ann ◽  
Relationship Of

Stress-strain relationship of geomaterials is important to numerical analysis in geotechnical engineering. It is difficult to be represented by conventional constitutive model accurately. Artificial neural network (ANN) has been proposed as a more effective approach to represent this complex and nonlinear relationship, but ANN itself still has some limitations that restrict the applicability of the method. In this paper, an alternative method, support vector machine (SVM), is proposed to simulate this type of complex constitutive relationship. The SVM model can overcome the limitations of ANN model while still processing the advantages over the traditional model. The application examples show that it is an effective and accurate modeling approach for stress-strain relationship representation for geomaterials.

Prediction of the optimal FSW process parameters for joints using machine learning techniques

2021 ◽  
Vol 63 (12) ◽  
pp. 1104-1111
Author(s):  
Furkan Sarsilmaz ◽  
Gürkan Kavuran
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Ann Model ◽  
Friction Stir ◽  
Learning Techniques ◽  
Svm Model ◽  
Artificial Neural Network Ann ◽  
Fsw Parameters

Abstract In this work, a couple of dissimilar AA2024/AA7075 plates were experimentally welded for the purpose of considering the effect of friction-stir welding (FSW) parameters on mechanical properties. First, the main mechanical properties such as ultimate tensile strength (UTS) and hardness of welded joints were determined experimentally. Secondly, these data were evaluated through modeling and the optimization of the FSW process as well as an optimal parametric combination to affirm tensile strength and hardness using a support vector machine (SVM) and an artificial neural network (ANN). In this study, a new ANN model, including the Nelder-Mead algorithm, was first used and compared with the SVM model in the FSW process. It was concluded that the ANN approach works better than SVM techniques. The validity and accuracy of the proposed method were proved by simulation studies.

scholarly journals Comparison of Different Machine Learning Methods for Debris Flow Susceptibility Mapping: A Case Study in the Sichuan Province, China

2020 ◽  
Vol 12 (2) ◽  
pp. 295 ◽  
Author(s):  
Ke Xiong ◽  
Basanta Raj Adhikari ◽  
Constantine A. Stamatopoulos ◽  
Yu Zhan ◽  
Shaolin Wu ◽  
...  
Keyword(s):  
Machine Learning ◽  
Debris Flow ◽  
Sichuan Province ◽  
Susceptibility Mapping ◽  
Boosted Regression Trees ◽  
Support Vector ◽  
Learning Methods ◽  
Machine Learning Methods ◽  
Susceptibility Maps ◽  
Debris Flow Susceptibility

Debris flow susceptibility mapping is considered to be useful for hazard prevention and mitigation. As a frequent debris flow area, many hazardous events have occurred annually and caused a lot of damage in the Sichuan Province, China. Therefore, this study attempted to evaluate and compare the performance of four state-of-the-art machine-learning methods, namely Logistic Regression (LR), Support Vector Machines (SVM), Random Forest (RF), and Boosted Regression Trees (BRT), for debris flow susceptibility mapping in this region. Four models were constructed based on the debris flow inventory and a range of causal factors. A variety of datasets was obtained through the combined application of remote sensing (RS) and geographic information system (GIS). The mean altitude, altitude difference, aridity index, and groove gradient played the most important role in the assessment. The performance of these modes was evaluated using predictive accuracy (ACC) and the area under the receiver operating characteristic curve (AUC). The results of this study showed that all four models were capable of producing accurate and robust debris flow susceptibility maps (ACC and AUC values were well above 0.75 and 0.80 separately). With an excellent spatial prediction capability and strong robustness, the BRT model (ACC = 0.781, AUC = 0.852) outperformed other models and was the ideal choice. Our results also exhibited the importance of selecting suitable mapping units and optimal predictors. Furthermore, the debris flow susceptibility maps of the Sichuan Province were produced, which can provide helpful data for assessing and mitigating debris flow hazards.

scholarly journals Use of GA-ANN and GA-SVM for a QSPR study on aqueous solubility of pesticides

2020 ◽  
pp. 66-66
Author(s):  
Amel Bouakkadia ◽  
Noureddine Kertiou ◽  
Rana Amiri ◽  
Youssouf Driouche ◽  
Djelloul Messadi
Keyword(s):  
Pearson Correlation ◽  
Chemical Properties ◽  
Aqueous Solubility ◽  
Important Variable ◽  
Support Vector ◽  
Ann Model ◽  
Experimental Procedure ◽  
Svm Model ◽  
Artificial Neural Network Ann ◽  
Selection Of

The partitioning tendency of pesticides, in these study herbicides in particular, into different environmental compartments depends mainly of the physic-chemical properties of the pesticides itself. Aqueous solubility (S) indicates the tendency of a pesticide to be removed from soil by runoff or irrigation and to reach surface water. The experimental procedure determining aqueous solubility of pesticides is very expensive and difficult. QSPR methods are often used to estimate the aqueous solubility of herbicides. The artificial neural network (ANN) and support vector machine (SVM) methods, every time associated with genetic algorithm (GA) selection of the most important variable, were used to develop QSPR models to predict the aqueous solubility of a series 80 herbicides. The values of log S of the studied compounds were well correlated with de descriptors. Considering the pertinent descriptors, a Pearson Correlation Squared (R2) coefficient of 0.8 was obtained for the ANN model with a structure of 5-3-1 and 0.8 was obtained for the SVM model using the RBF function for the optimal parameters values: C = 11.12; ? = 0.1111 and ? = 0.222.

scholarly journals Material Classification via Machine Learning Techniques: Construction Projects Progress Monitoring

2021 ◽  
Author(s):  
Wesam Salah Alaloul ◽  
Abdul Hannan Qureshi
Keyword(s):  
Machine Learning ◽  
Construction Projects ◽  
Industrial Revolution ◽  
Progress Monitoring ◽  
Concrete Block ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Ann Model ◽  
Material Classification ◽  
Artificial Neural Network Ann

Nowadays, the construction industry is on a fast track to adopting digital processes under the Industrial Revolution (IR) 4.0. The desire to automate maximum construction processes with less human interference has led the industry and research community to inclined towards artificial intelligence. This chapter has been themed on automated construction monitoring practices by adopting material classification via machine learning (ML) techniques. The study has been conducted by following the structure review approach to gain an understanding of the applications of ML techniques for construction progress assessment. Data were collected from the Web of Science (WoS) and Scopus databases, concluding 14 relevant studies. The literature review depicted the support vector machine (SVM) and artificial neural network (ANN) techniques as more effective than other ML techniques for material classification. The last section of this chapter includes a python-based ANN model for material classification. This ANN model has been tested for construction items (brick, wood, concrete block, and asphalt) for training and prediction. Moreover, the predictive ANN model results have been shared for the readers, along with the resources and open-source web links.

scholarly journals Analysis of Model Performance and Implementation of an Optimized Flood Prediction Model Using Data Mining Techniques

2021 ◽  
Vol 10 (2) ◽  
pp. 888-893
Keyword(s):  
Prediction Model ◽  
Model Performance ◽  
Warning System ◽  
Support Vector ◽  
Ann Model ◽  
Flood Prediction ◽  
River Region ◽  
Input Variables ◽  
Using Data ◽  
Artificial Neural Network Ann

Flooding is a major problem globally, and especially in SuratThani province, Thailand. Along the lower Tapeeriver in SuratThani, the population density is high. Implementing an early warning system can benefit people living along the banks here. In this study, our aim was to build a flood prediction model using artificial neural network (ANN), which would utilize water and stream levels along the lower Tapeeriver to predict floods. This model was used to predict flood using a dataset of rainfall and stream levels measured at local stations. The developed flood prediction model consisted of 4 input variables, namely, the rainfall amounts and stream levels at stations located in the PhraSeang district (X.37A), the Khian Sa district (X.217), and in the Phunphin district (X.5C). Model performance was evaluated using input data spanning a period of eight years (2011–2018). The model performance was compared with support vector machine (SVM), and ANN had better accuracy. The results showed an accuracy of 97.91% for the ANN model; however, for SVM it was 97.54%. Furthermore, the recall (42.78%) and f-measure (52.24%) were better for our model, however, the precision was lower. Therefore, the designed flood prediction model can estimate the likelihood of floods around the lower Tapee river region

scholarly journals Dielectric technique combined with artificial neural network and support vector regression in moisture content prediction of olive

2020 ◽  
Vol 66 (No. 1) ◽  
pp. 1-7
Author(s):  
Mahdi Rashvand ◽  
Mahmoud Soltani Firouz
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Moisture Content ◽  
Support Vector Regression ◽  
Prediction Models ◽  
Electronic Device ◽  
Support Vector ◽  
Ann Model ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Olives are one of the most important agriculture crops in the world, which are harvested in different stages of growth for various uses. One of the ways to detect the adequate time to process the olives is to determine their moisture content. In this study, to determine the moisture content of olives, a dielectric technique was used in seven periods of harvesting and three different varieties of olive including Oily, Mary and Fishemi. The dielectric properties of the olive fruits were measured using an electronic device in the range of 0.1–30 MHz. Artificial Neural Network (ANN) and Support Vector Regression (SVR) methods were applied to develop the prediction models by using the obtained data acquired by the system. The best results (R = 0.999 and MSE = 0.014) were obtained by the ANN model with a topology of 384–12–1 (384 features in the input vector, 12 neurons in the hidden layer and 1 output). The results obtained indicated the acceptable accuracy of the dielectric technique combined with the ANN model.

Gene Expression Programming and Machine Learning Methods for Bushfire Susceptibility Mapping in New South Wales, Australia

2021 ◽  
Author(s):  
Maryamsadat Hosseini ◽  
Samsung Lim
Keyword(s):  
Gene Expression ◽  
New South ◽  
Gene Expression Programming ◽  
Single Gene ◽  
New South Wales ◽  
Susceptibility Mapping ◽  
Support Vector ◽  
Ensemble Techniques ◽  
South Wales ◽  
Susceptibility Maps

Abstract Australia is one of the most bushfire-prone countries. Prediction and management of bushfires in bushfire-susceptible areas can reduce the negative impacts of bushfires. The generation of bushfire susceptibility maps can help improve the prediction of bushfires. The main aim of this study was to use single gene expression programming (GEP) and ensemble of GEP with well-known statistical methods to generate bushfire susceptibility maps for New South Wales, Australia as a case study. We used eight methods for bushfire susceptibility mapping: GEP, random forest (RF), support vector machine (SVM), frequency ratio (FR), ensemble techniques of GEP and FR (GEPFR), RF and FR (RFFR), SVM and FR (SVMFR), and LR and FR (LRFR). Areas under the curve (AUCs) of the receiver operating characteristic were used to evaluate the proposed methods. GEPFR exhibited the best performance for bushfire susceptibility mapping based on the AUC (0.890), while RFFR had the highest accuracy (94.70%) among the proposed methods. GEPFR is an ensemble method that uses features from the evolutionary algorithm and the statistical FR method, which results in a better AUC for the bushfire susceptibility maps. The ensemble methods had better performances than those of the single methods.

scholarly journals Soil depth modelling using terrain analysis and satellite imagery: the case study of Qeshlaq mountainous watershed (Kurdistan, Iran)

2017 ◽  
Vol 48 (3) ◽  
pp. 167 ◽  
Author(s):  
Salahudin Zahedi ◽  
Kaka Shahedi ◽  
Mahmod Habibnejad Rawshan ◽  
Karim Solimani ◽  
Kourosh Dadkhah
Keyword(s):  
Soil Depth ◽  
Remote Sensing Data ◽  
Support Vector ◽  
Terrain Analysis ◽  
Ann Model ◽  
Deep Soil ◽  
Explanatory Variables ◽  
Model Soil ◽  
Mountainous Watershed ◽  
Artificial Neural Network Ann

Soil depth is a major soil characteristic, which is commonly used in distributed hydrological modelling in order to present watershed subsurface attributes. This study aims at developing a statistical model for predicting the spatial pattern of soil depth over the mountainous watershed from environmental variables derived from a digital elevation model (DEM) and remote sensing data. Among the explanatory variables used in the models, seven are derived from a 10 m resolution DEM, namely specific catchment area, wetness index, aspect, slope, plan curvature, elevation and sediment transport index. Three variables landuse, NDVI and pca1 are derived from Landsat8 imagery, and are used for predicting soil depth by the models. Soil attributes, soil moisture, topographic curvature, training samples for each landuse and major vegetation types are considered at 429 profiles within four subwatersheds. Random forests (RF), support vector machine (SVM) and artificial neural network (ANN) are used to predict soil depth using the explanatory variables. The models are run using 336 data points in the calibration dataset with all 31 explanatory variables, and soil depth as the response of the models. Mean decrease permutation accuracy is performed on Variable selection. Testing dataset is done with the model soil depth values at testing locations (93 points) using different efficiency criteria. Prediction error is computed for both the calibration and testing datasets. Results show that the variables landuse, specific surface area, slope, pca1, NDVI and aspect are the most important explanatory variables in predicting soil depth. RF and SVM models are appropriate for the mountainous watershed areas that have been limited in the depth of the soil and ANN model is more suitable for watershed with the fields of agricultural and deep soil depth.

A Novel SVM-Based Method for Seismic First-Arrival Detecting

2010 ◽  
Vol 29-32 ◽  
pp. 973-978 ◽  
Author(s):  
Ming Chen ◽  
Yong Li ◽  
Jun Xie
Keyword(s):  
Support Vector ◽  
The Novel ◽  
Ann Model ◽  
Seismic Record ◽  
Feature Vectors ◽  
Svm Model ◽  
First Arrival ◽  
Ann Models ◽  
Novel Method ◽  
Artificial Neural Network Ann

First arrivals detecting on seismic record is important at all times. A novel support vector machine (SVM)-based method for seismic first-arrival pickup is proposed in this research. Firstly, the multi-resolution wavelet decomposition is used to de-noise the seismic record. And then, feature vectors are extracted from the denoise data. Finally, both SVM and artificial neural network (ANN) models are employed to train and predict the feature vectors. Experimental results demonstrate that the SVM model gives better accuracy than the ANN model. It is promising that the novel method is very prospective.

Sign in / Sign up

Export Citation Format

Share Document