scholarly journals A High-Precision and Wideband Fundamental Frequency Measurement Method for Synchronous Sampling Used in the Power Analyzer

2021 ◽  
Vol 9 ◽  
Author(s):  
Yifan Wang ◽  
Kai Chen ◽  
Xuan Gou ◽  
Renjun He ◽  
Wenjian Zhou ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Fundamental Frequency ◽  
High Precision ◽  
Frequency Measurement ◽  
Optimization Method ◽  
Measurement Range ◽  
Synchronous Sampling ◽  
Wide Range ◽  
High Measurement ◽  
Point Fast Fourier Transform

In the dedicated high-precision power quality analyzer, synchronous sampling is required to reduce the effect of spectrum leakage produced by the discrete Fourier transform process. Thus, accurate fundamental frequency measurement is urgently needed. However, due to the harmonics and noise in the power signal, it is difficult to achieve the accurate fundamental frequency measurement. Moreover, with the wide application of high-frequency programmable power supply, the fundamental frequency is gradually increasing, which requires power analyzers to have the abilities of both high precision and a wide range of the fundamental frequency measurement. To solve these issues, a new fundamental frequency measurement architecture used in synchronous sampling is proposed. This architecture consists of a small-point fast Fourier transform module, spectrum refinement algorithm, and a multimodal optimization method to calculate the accurate fundamental frequency under large harmonic conditions. In the practical hardware platform results, this architecture has a large fundamental frequency measurement range from 20 Hz to 200 kHz with a relative error which is <0.004%. The wideband fundamental frequency measurement structure proposed in this article achieves high measurement accuracy.

scholarly journals Wide-range, high-precision multiple microwave frequency measurement using a chip-based photonic Brillouin filter

Optica ◽  
2016 ◽  
Vol 3 (1) ◽  
pp. 30 ◽  
Author(s):  
Hengyun Jiang ◽  
David Marpaung ◽  
Mattia Pagani ◽  
Khu Vu ◽  
Duk-Yong Choi ◽  
...  
Keyword(s):  
High Precision ◽  
Microwave Frequency ◽  
Frequency Measurement ◽  
Wide Range

scholarly journals The new analytical expression for measurement uncertainty in a measuring of RMS value of AC signals as result of non ideal synchronization

2006 ◽  
Vol 3 (1) ◽  
pp. 33-43
Author(s):  
Predrag Petrovic
Keyword(s):  
Computer Simulation ◽  
Measurement Uncertainty ◽  
Root Mean Square ◽  
Fundamental Frequency ◽  
High Precision ◽  
Mathematical Expression ◽  
Mean Square ◽  
Precision Instrument ◽  
Synchronous Sampling ◽  
Measurement Uncertainties

Synchronous sampling allows alternating current (AC) quantities, such as the root mean square (RMS) values of voltage and power, to be determined with very low uncertainties (on the order of a few parts of 10-6 [1]). In this a new mathematical expression for estimating measurement uncertainties in non ideal synchronization with fundamental frequency AC signals is presented. The obtained results were compared with those obtained with a high-precision instrument for measuring basic AC values. Computer simulation demonstrating the effectiveness of these new expression, are also presented.

State special primary acceleration measurement standard for gravimetry GET 190-2019

2020 ◽  
pp. 3-8
Author(s):  
L.F. Vitushkin ◽  
F.F. Karpeshin ◽  
E.P. Krivtsov ◽  
P.P. Krolitsky ◽  
V.V. Nalivaev ◽  
...  
Keyword(s):  
High Precision ◽  
Free Fall ◽  
Measurement Range ◽  
Measurement Standard ◽  
Acceleration Measurement ◽  
Measurement Systems ◽  
Free Fall Acceleration ◽  
Investigation Methods ◽  
Measurement Results ◽  
Upper Level

The State special primary acceleration measurement standard for gravimetry (GET 190-2019), its composition, principle of operation and basic metrological characteristics are presented. This standard is on the upper level of reference for free-fall acceleration measurements. Its accuracy and reliability were improved as a result of optimisation of the adjustment procedures for measurement systems and its integration within the upgraded systems, units and modern hardware components. A special attention was given to adjusting the corrections applied to measurement results with respect to procedural, physical and technical limitations. The used investigation methods made it possibled to confirm the measurement range of GET 190-2019 and to determine the contributions of main sources of errors and the total value of these errors. The measurement characteristics and GET 90-2019 were confirmed by the results obtained from measurements of the absolute value of the free fall acceleration at the gravimetrical site “Lomonosov-1” and by their collation with the data of different dates obtained from measurements by high-precision foreign and domestic gravimeters. Topicality of such measurements ensues from the requirements to handle the applied problems that need data on parameters of the Earth gravitational field, to be adequately faced. Geophysics and navigation are the main fields of application for high-precision measurements in this field.

scholarly journals Separate Universe calibration of the dependence of halo bias on cosmic web anisotropy

2020 ◽  
Vol 499 (3) ◽  
pp. 4418-4431 ◽  
Author(s):  
Sujatha Ramakrishnan ◽  
Aseem Paranjape
Keyword(s):  
Dark Matter ◽  
High Precision ◽  
Gaussian Distribution ◽  
Initial Perturbation ◽  
Analytical Framework ◽  
Web Environment ◽  
Wide Range ◽  
Galaxy Assembly ◽  
Very High ◽  
Good Agreement

ABSTRACT We use the Separate Universe technique to calibrate the dependence of linear and quadratic halo bias b1 and b2 on the local cosmic web environment of dark matter haloes. We do this by measuring the response of halo abundances at fixed mass and cosmic web tidal anisotropy α to an infinite wavelength initial perturbation. We augment our measurements with an analytical framework developed in earlier work that exploits the near-lognormal shape of the distribution of α and results in very high precision calibrations. We present convenient fitting functions for the dependence of b1 and b2 on α over a wide range of halo mass for redshifts 0 ≤ z ≤ 1. Our calibration of b2(α) is the first demonstration to date of the dependence of non-linear bias on the local web environment. Motivated by previous results that showed that α is the primary indicator of halo assembly bias for a number of halo properties beyond halo mass, we then extend our analytical framework to accommodate the dependence of b1 and b2 on any such secondary property that has, or can be monotonically transformed to have, a Gaussian distribution. We demonstrate this technique for the specific case of halo concentration, finding good agreement with previous results. Our calibrations will be useful for a variety of halo model analyses focusing on galaxy assembly bias, as well as analytical forecasts of the potential for using α as a segregating variable in multitracer analyses.

scholarly journals A Resonant Pressure Microsensor with a Wide Pressure Measurement Range

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 382
Author(s):  
Chao Xiang ◽  
Yulan Lu ◽  
Chao Cheng ◽  
Junbo Wang ◽  
Deyong Chen ◽  
...  
Keyword(s):  
Chemical Mechanical Planarization ◽  
Measurement Range ◽  
Silicon On Insulator ◽  
Anodic Bonding ◽  
Pressure Measurements ◽  
Quality Factors ◽  
Deep Reactive Ion Etching ◽  
Wide Range ◽  
Form Pressure ◽  
Silicon Islands

This paper presents a resonant pressure microsensor with a wide range of pressure measurements. The developed microsensor is mainly composed of a silicon-on-insulator (SOI) wafer to form pressure-sensing elements, and a silicon-on-glass (SOG) cap to form vacuum encapsulation. To realize a wide range of pressure measurements, silicon islands were deployed on the device layer of the SOI wafer to enhance equivalent stiffness and structural stability of the pressure-sensitive diaphragm. Moreover, a cylindrical vacuum cavity was deployed on the SOG cap with the purpose to decrease the stresses generated during the silicon-to-glass contact during pressure measurements. The fabrication processes mainly contained photolithography, deep reactive ion etching (DRIE), chemical mechanical planarization (CMP) and anodic bonding. According to the characterization experiments, the quality factors of the resonators were higher than 15,000 with pressure sensitivities of 0.51 Hz/kPa (resonator I), −1.75 Hz/kPa (resonator II) and temperature coefficients of frequency of 1.92 Hz/°C (resonator I), 1.98 Hz/°C (resonator II). Following temperature compensation, the fitting error of the microsensor was within the range of 0.006% FS and the measurement accuracy was as high as 0.017% FS in the pressure range of 200 ~ 7000 kPa and the temperature range of −40 °C to 80 °C.

scholarly journals Frequency synchronization detection method based on adaptive frequency standard tracking

Open Physics ◽  
2021 ◽  
Vol 19 (1) ◽  
pp. 434-438
Author(s):  
Xin Geng ◽  
Baoqiang Du ◽  
Jianwei Zhang ◽  
Erlin Tian
Keyword(s):  
Detection Method ◽  
Wide Band ◽  
Frequency Standard ◽  
Frequency Measurement ◽  
Measurement Range ◽  
Period Change ◽  
Measured Signal ◽  
Frequency Synchronization ◽  
Measured Frequency ◽  
Field Programmable

Abstract In order to achieve wide-band high-resolution frequency measurement, a frequency synchronization detection method based on adaptive frequency standard tracking is proposed based on the quantized phase processing. First, the nominal value of the measured frequency signal was obtained from the rough frequency measurement module. Then, the field programmable gate array generated the nominal value of the measured frequency. After that, the direct comparison between the tracking frequency and the measured signal was carried out. Finally, the group quantized processing module gave the final result according to the phase full-period change time. Experimental results showed that the method has a wide frequency measurement range and high accuracy and can obtain frequency stability of the order of 10−13/s.

scholarly journals Dynamic Optimization Method for Broadband ADCP Waveform with Environment Constraints

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3768
Author(s):  
Yongshou Yang ◽  
Shiliang Fang
Keyword(s):  
Distance Estimation ◽  
Acoustic Doppler Current Profiler ◽  
Optimization Method ◽  
Measurement Range ◽  
Velocity Estimation ◽  
Estimation Accuracy ◽  
Dynamic Configuration ◽  
Optimal Velocity ◽  
Flood Warning ◽  
The Impact

Broadband acoustic Doppler current profiler (ADCP) is widely used in agricultural water resource explorations, such as river discharge monitoring and flood warning. Improving the velocity estimation accuracy of broadband ADCP by adjusting the waveform parameters of a phase-encoded signal will reduce the velocity measurement range and water stratification accuracy, while the promotion of stratification accuracy will degrade the velocity estimation accuracy. In order to minimize the impact of these two problems on the measurement results, the ADCP waveform optimization problem that satisfies the environment constraints while keeping high velocity estimation accuracy or stratification accuracy is studied. Firstly, the relationship between velocity or distance estimation accuracy and signal waveform parameters is studied by using an ambiguity function. Secondly, the constraints of current velocity range, velocity distribution and other environmental characteristics on the waveform parameters are studied. For two common measurement applications, two dynamic configuration methods of waveform parameters with environmental adaptability and optimal velocity estimation accuracy or stratification accuracy are proposed based on the nonlinear programming principle. Experimental results show that compared with the existing methods, the velocity estimation accuracy of the proposed method is improved by more than 50%, and the stratification accuracy is improved by more than 22%.

scholarly journals Optical whispering-gallery mode barcodes for high-precision and wide-range temperature measurements

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Jie Liao ◽  
Lan Yang
Keyword(s):  
High Precision ◽  
Dynamic Range ◽  
Single Mode ◽  
Whispering Gallery Mode ◽  
Temperature Measurements ◽  
Laser Source ◽  
Multiple Modes ◽  
Whispering Gallery ◽  
Wide Range ◽  
Thermal Sensing

AbstractTemperature is one of the most fundamental physical properties to characterize various physical, chemical, and biological processes. Even a slight change in temperature could have an impact on the status or dynamics of a system. Thus, there is a great need for high-precision and large-dynamic-range temperature measurements. Conventional temperature sensors encounter difficulties in high-precision thermal sensing on the submicron scale. Recently, optical whispering-gallery mode (WGM) sensors have shown promise for many sensing applications, such as thermal sensing, magnetic detection, and biosensing. However, despite their superior sensitivity, the conventional sensing method for WGM resonators relies on tracking the changes in a single mode, which limits the dynamic range constrained by the laser source that has to be fine-tuned in a timely manner to follow the selected mode during the measurement. Moreover, we cannot derive the actual temperature from the spectrum directly but rather derive a relative temperature change. Here, we demonstrate an optical WGM barcode technique involving simultaneous monitoring of the patterns of multiple modes that can provide a direct temperature readout from the spectrum. The measurement relies on the patterns of multiple modes in the WGM spectrum instead of the changes of a particular mode. It can provide us with more information than the single-mode spectrum, such as the precise measurement of actual temperatures. Leveraging the high sensitivity of WGMs and eliminating the need to monitor particular modes, this work lays the foundation for developing a high-performance temperature sensor with not only superior sensitivity but also a broad dynamic range.

Sign in / Sign up

Export Citation Format

Share Document