scholarly journals Weak Tradeoff and Strong Segmentation Among Plant Hydraulic Traits During Seasonal Variation in Four Woody Species

2020 ◽  
Vol 11 ◽  
Author(s):  
Xiao Liu ◽  
Qiang Li ◽  
Feng Wang ◽  
Xiaohan Sun ◽  
Ning Wang ◽  
...  
Keyword(s):  
High Efficiency ◽  
Robinia Pseudoacacia ◽  
Woody Species ◽  
Maximum Efficiency ◽  
Quercus Acutissima ◽  
Relative Water ◽  
Warm Temperate Zone ◽  
Low Efficiency ◽  
Embolism Resistance ◽  
Rhus Typhina

Plants may maintain long-term xylem function via efficiency-safety tradeoff and segmentation. Most studies focus on the growing season and community level. We studied species with different efficiency-safety tradeoff strategies, Quercus acutissima, Robinia pseudoacacia, Vitex negundo var. heterophylla, and Rhus typhina, to determine the seasonality of this mechanism. We separated their branches into perennial shoots and terminal twigs and monitored their midday water potential (Ψmd), relative water content (RWC), stem-specific hydraulic conductivity (Ks), loss of 12, 50, and 88% of maximum efficiency (i.e., P12, P50, P88) for 2 years. There were no correlations between water relations (Ψmd, RWC, Ks) and embolism resistance traits (P12, P50, P88) but they significantly differed between the perennial shoots and terminal twigs. All species had weak annual hydraulic efficiency-safety tradeoff but strong segmentation between the perennial shoots and the terminal twigs. R. pseudoacacia used a high-efficiency, low-safety strategy, whereas R. typhina used a high-safety, low-efficiency strategy. Q. acutissima and V. negundo var. heterophylla alternated these strategies. This mechanism provides a potential basis for habitat partitioning and niche divergence in the changing warm temperate zone environment.

scholarly journals Reduced Efficiency Roll-Off in White Phosphorescent Organic Light-Emitting Diodes Based on Double Emission Layers

Molecules ◽  
2019 ◽  
Vol 24 (1) ◽  
pp. 211
Author(s):  
Ren Sheng ◽  
Ying Gao ◽  
Asu Li ◽  
Yu Duan ◽  
Yi Zhao ◽  
...  
Keyword(s):  
Carrier Transport ◽  
Doping Concentration ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Organic Light Emitting Diodes ◽  
Maximum Efficiency ◽  
Light Emitting ◽  
Organic Light ◽  
Exciton Recombination ◽  
Low Efficiency

We demonstrate high-efficiency white phosphorescent organic light-emitting diodes with low efficiency roll-off. The feature of the device concept is employing two phosphorescent emission layers (EMLs) separated by a mixed interlayer. Both the EMLs are doped by two phosphorescent dyes. The resulting white device with the optimized doping concentration shows a maximum efficiency of 31.0 cd/A with extremely low efficiency roll-off of 30.7 cd/A at 1000 cd/m2, 27.2 cd/A at 5000 cd/m2, and 25.5 cd/A at 10,000 cd/m2, respectively, without any outcoupling structures. This is enabled by the balanced charge carrier transport in EMLs, leading to broader exciton recombination zone.

scholarly journals ZVS Auxiliary Circuit for a 10 kW Unregulated LLC Full-Bridge Operating at Resonant Frequency for Aircraft Application

Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1850 ◽  
Author(s):  
Yann E. Bouvier ◽  
Diego Serrano ◽  
Uroš Borović ◽  
Gonzalo Moreno ◽  
Miroslav Vasić ◽  
...  
Keyword(s):  
Resonant Frequency ◽  
Power Density ◽  
High Efficiency ◽  
Harmonic Approximation ◽  
Maximum Efficiency ◽  
Voltage Gain ◽  
Load Range ◽  
Transition Analysis ◽  
Aircraft Application ◽  
Auxiliary Circuit

In modern aircraft designs, following the More Electrical Aircraft (MEA) philosophy, there is a growing need for new high-power converters. In this context, innovative solutions to provide high efficiency and power density are required. This paper proposes an unregulated LLC full-bridge operating at resonant frequency to obtain a constant gain at all loads. The first harmonic approximation (FHA) model is not accurate enough to estimate the voltage gain in converters with high parasitic resistance. A modified FHA model is proposed for voltage gain analysis, and time-based models are used to calculate the instantaneous current required for the ZVS transition analysis. A method using charge instead of current is proposed and used for this ZVS analysis. Using this method, an auxiliary circuit is proposed to achieve complete ZVS within the whole load range, avoiding a gapped transformer design and increasing the efficiency and power density. A 28 Vdc output voltage prototype, with 10 kW peak output power, has been developed to validate the theoretical analysis and the proposed auxiliary circuit. The maximum efficiency (96.3%) is achieved at the nominal power of 5 kW.

scholarly journals Design of Grating Al2O3 Passivation Structure Optimized for High-Efficiency Cu(In,Ga)Se2 Solar Cells

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4849
Author(s):  
Chan Hyeon Park ◽  
Jun Yong Kim ◽  
Shi-Joon Sung ◽  
Dae-Hwan Kim ◽  
Yun Seon Do
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Surface Passivation ◽  
Rear Surface ◽  
Maximum Efficiency ◽  
Structural Factors ◽  
Carrier Recombination ◽  
Cigs Solar Cells ◽  
Effective Carrier ◽  
Opening Width

In this paper, we propose an optimized structure of thin Cu(In,Ga)Se2 (CIGS) solar cells with a grating aluminum oxide (Al2O3) passivation layer (GAPL) providing nano-sized contact openings in order to improve power conversion efficiency using optoelectrical simulations. Al2O3 is used as a rear surface passivation material to reduce carrier recombination and improve reflectivity at a rear surface for high efficiency in thin CIGS solar cells. To realize high efficiency for thin CIGS solar cells, the optimized structure was designed by manipulating two structural factors: the contact opening width (COW) and the pitch of the GAPL. Compared with an unpassivated thin CIGS solar cell, the efficiency was improved up to 20.38% when the pitch of the GAPL was 7.5–12.5 μm. Furthermore, the efficiency was improved as the COW of the GAPL was decreased. The maximum efficiency value occurred when the COW was 100 nm because of the effective carrier recombination inhibition and high reflectivity of the Al2O3 insulator passivation with local contacts. These results indicate that the designed structure has optimized structural points for high-efficiency thin CIGS solar cells. Therefore, the photovoltaic (PV) generator and sensor designers can achieve the higher performance of photosensitive thin CIGS solar cells by considering these results.

scholarly journals CHROMOSOMAL BASIS OF THE MEROZYGOSITY IN A PARTIALLY DIPLOID MUTANT OF PNEUMOCOCCUS

Genetics ◽  
1975 ◽  
Vol 80 (4) ◽  
pp. 667-678
Author(s):  
Mary Lee S Ledbetter ◽  
Rollin D Hotchkiss
Keyword(s):  
High Efficiency ◽  
Point Mutations ◽  
Resistant Mutant ◽  
Chromosomal Marker ◽  
Structural Abnormality ◽  
C Cells ◽  
Wild Type ◽  
Chromosomal Locus ◽  
Low Efficiency ◽  
Derivatives Of

ABSTRACT A sulfonamide-resistant mutant of pneumococcus, sulr-c, displays a genetic instability, regularly segregating to wild type. DNA extracts of derivatives of the strain possess transforming activities for both the mutant and wild-type alleles, establishing that the strain is a partial diploid. The linkage of sulr-c to strr-61, a stable chromosomal marker, was established, thus defining a chromosomal locus for sulr-c. DNA isolated from sulr-c cells transforms two mutant recipient strains at the same low efficiency as it does a wild-type recipient, although the mutant property of these strains makes them capable of integrating classical "low-efficiency" donor markers equally as efficiently as "high efficiency" markers. Hence sulr-c must have a different basis for its low efficiency than do classical low efficiency point mutations. We suggest that the DNA in the region of the sulr-c mutation has a structural abnormality which leads both to its frequent segregation during growth and its difficulty in efficiently mediating genetic transformation.

scholarly journals A Brief Review on Solvent-Free Synthesis of Zeolites

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 788
Author(s):  
Jinlin Mei ◽  
Aijun Duan ◽  
Xilong Wang
Keyword(s):  
High Efficiency ◽  
Raw Materials ◽  
Solvent Free ◽  
High Yield ◽  
Control Synthesis ◽  
Mechanical Mixing ◽  
Synthesis Mechanism ◽  
Wastewater Pollution ◽  
Low Efficiency ◽  
Solvent Free Synthesis

The traditional hydrothermal method to prepare zeolite will inevitably use a large amount of water as a solvent, which will lead to higher autogenous pressure, low efficiency, and wastewater pollution. The solvent-free method can be used to synthesize various types of zeolites by mechanical mixing, grinding, and heating of solid raw materials, which exhibits the apparent advantages of high yield, low pollution, and high efficiency. This review mainly introduces the development process of solvent-free synthesis, preparation of hierarchical zeolite, morphology control, synthesis mechanism and applications of solvent-free methods. It can be believed that solvent-free methods will become a research focus and have enormous industrial application potential.

scholarly journals Inflight Transmission of COVID-19 Based on Experimental Aerosol Dispersion Data

2021 ◽  
Author(s):  
Zhaozhi Wang ◽  
Edwin R Galea ◽  
Angus Grandison ◽  
John Ewer ◽  
Fuchen Jia
Keyword(s):  
High Efficiency ◽  
Face Mask ◽  
Generation Rate ◽  
Aviation Industry ◽  
Filtration System ◽  
Dispersion Data ◽  
Low Probability ◽  
Meal Service ◽  
Low Efficiency ◽  
Aerosol Dispersion

Abstract Background An issue of concern to the travelling public is the possibility of in-flight transmission of COVID-19 during long- and short-haul flights. The aviation industry maintains that the probability of contracting the illness is small based on reported cases, modelling and data from aerosol dispersion experiments conducted on-board aircraft. Methods Using experimentally derived aerosol dispersion data for a B777–200 aircraft and a modified version of the Wells-Riley equation we estimate inflight infection probability for a range of scenarios involving quanta generation rate and face mask efficiency. Quanta generation rates were selected based on COVID-19 events reported in the literature while mask efficiency was determined from the aerosol dispersion experiments. Results The MID-AFT cabin exhibits the highest infection probability. The calculated maximum individual infection probability (without masks) for a 2-hour flight in this section varies from 4.5% for the ‘Mild Scenario’ to 60.2% for the ‘Severe Scenario’ although the corresponding average infection probability varies from 0.1% to 2.5%. For a 12-hour flight, the corresponding maximum individual infection probability varies from 24.1% to 99.6% and the average infection probability varies from 0.8% to 10.8%. If all passengers wear face masks throughout the 12-hour flight, the average infection probability can be reduced by approximately 73%/32% for high/low efficiency masks. If face masks are worn by all passengers except during a one-hour meal service, the average infection probability is increased by 59%/8% compared to the situation where the mask is not removed. Conclusions This analysis has demonstrated that while there is a significant reduction in aerosol concentration due to the nature of the cabin ventilation and filtration system, this does not necessarily mean that there is a low probability or risk of in-flight infection. However, mask wearing, particularly high-efficiency ones, significantly reduces this risk.

scholarly journals Low-pressure reversible axial fan with straight profile blades and relatively high efficiency

2012 ◽  
Vol 16 (suppl. 2) ◽  
pp. 593-603 ◽  
Author(s):  
Zivan Spasic ◽  
Sasa Milanovic ◽  
Vanja Sustersic ◽  
Boban Nikolic
Keyword(s):  
Numerical Simulations ◽  
High Efficiency ◽  
Suction Side ◽  
Standard Test ◽  
Maximum Efficiency ◽  
Specific Work ◽  
Blade Profile ◽  
Operating Characteristics ◽  
Axial Fan ◽  
Increase Energy Efficiency

The paper presents the design and operating characteristics of a model of reversible axial fan with only one impeller, whose reversibility is achieved by changing the direction of rotation. The fan is designed for the purpose of providing alternating air circulation in wood dryers in order to reduce the consumption of electricity for the fan and increase energy efficiency of the entire dryer. To satisfy the reversibility of flow, the shape of the blade profile is symmetrical along the longitudinal and transversal axes of the profile. The fan is designed with equal specific work of all elementary stages, using the method of lift forces. The impeller blades have straight mean line profiles. The shape of the blade profile was adopted after the numerical simulations were carried out and high efficiency was achieved. Based on the calculation and conducted numerical simulations, a physical model of the fan was created and tested on a standard test rig, with air loading at the suction side of the fan. The operating characteristics are shown for different blade angles. The obtained maximum efficiency was around 0.65, which represents a rather high value for axial fans with straight profile blades.

Theoretical Study on the Influence of Transmission Parameters on the Transmission Performance of Magnetic Resonance Wireless Power Transmission Systems

2014 ◽  
Vol 926-930 ◽  
pp. 434-439
Author(s):  
Chang Sheng Li ◽  
Juan Cao ◽  
He Zhang
Keyword(s):  
Magnetic Resonance ◽  
High Efficiency ◽  
Power Transmission ◽  
Maximum Efficiency ◽  
System Quality ◽  
Wireless Power ◽  
Transmission Performance ◽  
Wireless Power Transmission ◽  
Transmission Systems ◽  
Transmission Parameters

Magnetic resonance wireless power transmission technology is based on the phenomenon of resonant coupling to realize non-contact power transmission via near magnetic field. Based on the mutual coupling model of resonance system, the influence laws of system transmission parameters, such as coil coupling coefficients, load resistance, etc., on the transmission performance are theoretically studied in this paper. The research results shows that the power high-efficiency and high-quality transmission does not depend on the large coil loop coupling coefficient and the working frequencies of maximum power and maximum efficiency transmission do not coincide at most condition. Transmission systems with a high resonance frequency can produce high power and efficiency transmission over short distances. In addition, by increasing the coil diameter or wire diameter can improve the system quality factor, and optimize the energy transmission performance.

Sign in / Sign up

Export Citation Format

Share Document