scholarly journals Effect of Performance of Soil Cultivator with Different Surface Textures of Shovel Wing

Agriculture ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1039
Author(s):  
Ming Wang ◽  
Zuoli Fu ◽  
Zhiqi Zheng ◽  
Yuxiang Huang ◽  
Wuquan Wei
Keyword(s):  
Convex Hull ◽  
Surface Textures ◽  
Main Research ◽  
Fragmentation Rate ◽  
Element Simulation ◽  
Verification Test ◽  
Working Performance ◽  
Relative Errors ◽  
Main Factor

Cultivating the soil is a necessary measure to ensure the growth of potatoes, and it has a significant impact on potato yield. In this study, a soil cultivator with a textured shovel wing was designed to address the problem that soil cultivators have poor working performance. Based on a combination of discrete element simulation and a digital soil trench verification test, the effects of the structure parameters of the surface textures on the traction resistance and soil fragmentation rate of the soil cultivator with a textured shovel wing were studied. These parameters were optimized to provide a basis for the design of the soil cultivator. The main research results of this paper are as follows. (1) The factors influencing the traction resistance of the soil cultivator were as follows: blade penetration angle > convex hull distance > convex hull diameter. The convex hull diameter was the main factor affecting the soil fragmentation rate. The traction resistance of the soil cultivator with a textured wing was reduced by 9.49%, and the soil fragmentation rate was increased by 10.67%, showing that the quality of soil cultivation was significantly improved. (2) The best parameters for the texture structure of the shovel wing were a blade penetration angle of 26°, a convex hull diameter of 34.4 mm, and a convex hull distance of 28.5 mm. (3) The relative errors between the simulation and the soil trench test for the traction resistance and the soil fragmentation rate were 2.60% and 13.97%, respectively. This study can provide technical support for the design of soil cultivators and is of great significance in improving the quality of soil cultivators.

scholarly journals On the Design of Efficient Hierarchic Architecture for Software Defined Vehicular Networks

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1400
Author(s):  
Muhammad Adnan ◽  
Jawaid Iqbal ◽  
Abdul Waheed ◽  
Noor Ul Amin ◽  
Mahdi Zareei ◽  
...  
Keyword(s):  
Cloud Computing ◽  
Quality Of Service ◽  
Traffic Management ◽  
Vehicular Networks ◽  
Scheduling Algorithm ◽  
Main Research ◽  
First Come First Serve ◽  
Computing Framework ◽  
Simulation Results

Modern vehicles are equipped with various sensors, onboard units, and devices such as Application Unit (AU) that support routing and communication. In VANETs, traffic management and Quality of Service (QoS) are the main research dimensions to be considered while designing VANETs architectures. To cope with the issues of QoS faced by the VANETs, we design an efficient SDN-based architecture where we focus on the QoS of VANETs. In this paper, QoS is achieved by a priority-based scheduling algorithm in which we prioritize traffic flow messages in the safety queue and non-safety queue. In the safety queue, the messages are prioritized based on deadline and size using the New Deadline and Size of data method (NDS) with constrained location and deadline. In contrast, the non-safety queue is prioritized based on First Come First Serve (FCFS) method. For the simulation of our proposed scheduling algorithm, we use a well-known cloud computing framework CloudSim toolkit. The simulation results of safety messages show better performance than non-safety messages in terms of execution time.

scholarly journals Techniques for Mitigating the Effects of Smoke Taint While Maintaining Quality in Wine Production: A Review

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1672
Author(s):  
Ysadora A. Mirabelli-Montan ◽  
Matteo Marangon ◽  
Antonio Graça ◽  
Christine M. Mayr Marangon ◽  
Kerry L. Wilkinson
Keyword(s):  
Global Perspective ◽  
Wine Industry ◽  
Wine Production ◽  
Specific Data ◽  
Main Research ◽  
Initial Severity ◽  
The Subject ◽  
Available Information

Smoke taint has become a prominent issue for the global wine industry as climate change continues to impact the length and extremity of fire seasons around the world. Although the issue has prompted a surge in research on the subject in recent years, no singular solution has yet been identified that is capable of maintaining the quality of wine made from smoke-affected grapes. In this review, we summarize the main research on smoke taint, the key discoveries, as well as the prevailing uncertainties. We also examine methods for mitigating smoke taint in the vineyard, in the winery, and post production. We assess the effectiveness of remediation methods (proposed and actual) based on available research. Our findings are in agreement with previous studies, suggesting that the most viable remedies for smoke taint are still the commercially available activated carbon fining and reverse osmosis treatments, but that the quality of the final treated wines is fundamentally dependent on the initial severity of the taint. In this review, suggestions for future studies are introduced for improving our understanding of methods that have thus far only been preliminarily investigated. We select regions that have already been subjected to severe wildfires, and therefore subjected to smoke taint (particularly Australia and California) as a case study to inform other wine-producing countries that will likely be impacted in the future and suggest specific data collection and policy implementation actions that should be taken, even in countries that have not yet been impacted by smoke taint. Ultimately, we streamline the available information on the topic of smoke taint, apply it to a global perspective that considers the various stakeholders involved, and provide a launching point for further research on the topic.

scholarly journals Modules and Techniques for Motion Planning: An Industrial Perspective

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 420
Author(s):  
Stefano Quer ◽  
Luz Garcia
Keyword(s):  
Data Fusion ◽  
Autonomous Driving ◽  
Random Trees ◽  
Approximation Techniques ◽  
Main Research ◽  
Autonomous Cars ◽  
Critical Issues ◽  
Relative Errors ◽  
Path Planner ◽  
Many Core

Research on autonomous cars has become one of the main research paths in the automotive industry, with many critical issues that remain to be explored while considering the overall methodology and its practical applicability. In this paper, we present an industrial experience in which we build a complete autonomous driving system, from the sensor units to the car control equipment, and we describe its adoption and testing phase on the field. We report how we organize data fusion and map manipulation to represent the required reality. We focus on the communication and synchronization issues between the data-fusion device and the path-planner, between the CPU and the GPU units, and among different CUDA kernels implementing the core local planner module. In these frameworks, we propose simple representation strategies and approximation techniques which guarantee almost no penalty in terms of accuracy and large savings in terms of memory occupation and memory transfer times. We show how we adopt a recent implementation on parallel many-core devices, such as CUDA-based GPGPU, to reduce the computational burden of rapidly exploring random trees to explore the state space along with a given reference path. We report on our use of the controller and the vehicle simulator. We run experiments on several real scenarios, and we report the paths generated with the different settings, with their relative errors and computation times. We prove that our approach can generate reasonable paths on a multitude of standard maneuvers in real time.

scholarly journals A guide to do randomized controlled trials in the field of otolaryngology

2021 ◽  
Vol 37 (1) ◽  
Author(s):  
Sameh M. Zamzam ◽  
Mosaad Abdel-Aziz ◽  
Ahmed Atef ◽  
Usama Abdel-Naseer ◽  
Mostafa Hamoda ◽  
...  
Keyword(s):  
Randomized Controlled Trials ◽  
Study Groups ◽  
Controlled Trials ◽  
Main Body ◽  
Main Research ◽  
Randomized Controlled ◽  
New Treatment ◽  
Meta Analyses ◽  
Based Medicine

Abstract Background Randomized controlled trials (RCTs) are prospective comparative studies in which study groups are allocated randomly to intervention or serve as controls. RCT is the mainstay to achieve evidence in the literature in clinical research. A RCT is the main research design to study the effect of an intervention and the only way to confirm the value of a new treatment. Main body RCT also gives the way to generate meta-analyses and systematic reviews giving a stronger evidence for clinical practice. Evidence-based medicine (EBM) is crucial for safe, effective, and standardized patient care. Although there is an agreement on the importance of performing RCT, it can be challenging to do it efficiently including different aspects like study design, funding, randomization, blinding, follow-up, data analysis, statistics, generalization of results, and reporting of quality of the studies. Conclusion In this article, we gave a comprehensive review for RCT in otolaryngology discussing their importance, advantages, and drawbacks, types, steps, challenges, reporting their quality and their prevalence in the literature.

Separation Standards—II

1966 ◽  
Vol 19 (2) ◽  
pp. 169-186 ◽  
Author(s):  
P. G. Reich
Keyword(s):  
One Dimension ◽  
Collision Risk ◽  
Practical Applications ◽  
Upper Limit ◽  
Intensive Observation ◽  
Relative Errors ◽  
Separation Standards

In the first part of this series of papers an outline was given of the approach made at the Royal Aircraft Establishment to the problems of estimating collision risk and of specifying the quality of navigation needed to make separation standards safe. It was stressed that estimates should be based on intensive observation of flying errors, rather than on speculative theories, and that it is more feasible to develop ‘upper limit’ estimating techniques than those which purport to give the exact risk. In summary, a list of seven ‘requirements’ was given, as a reminder of the essential principles which can so easily be overlooked in the piecemeal task of relating separation standards to collision risk.The purpose of this paper is to show some of the theoretical techniques which have been developed at R.A.E. to satisfy five of these requirements. (The remaining two do not call for special techniques and will be dealt with when practical applications are described in Part III.) The paper contains three Appendixes, dealing with the frequency of losing separation in one dimension, the computation of P's from the assumed tail shapes, and the treatment of relative errors. These are not included here but will appear in the off-printed version which may be obtained from the Royal Aircraft Establishment.Both this paper and the paper that follows by Mr. Attwooll are crown copyright and are reproduced with the permission of H.M. Stationery Office.

scholarly journals Strength Training Characteristics of Different Loads Based on Acceleration Sensor and Finite Element Simulation

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 647
Author(s):  
Bo Pang ◽  
Zhongqiu Ji ◽  
Zihua Zhang ◽  
Yunchuan Sun ◽  
Chunmin Ma ◽  
...  
Keyword(s):  
Finite Element ◽  
Knee Joint ◽  
Evaluation System ◽  
Bench Press ◽  
Element Analysis ◽  
Element Simulation ◽  
The Finite Element Analysis ◽  
Intensity Of Exercise ◽  
Deep Squat ◽  
Main Factor

Deep squat, bench press and hard pull are important ways for people to improve their strength. The use of sensors to measure force is rare. Measuring strength with sensors is extremely valuable for people to master the intensity of exercise to scientifically effective exercise. To this end, in this paper, we used a real-time wireless motion capture and mechanical evaluation system of the wearable sensor to measure the dynamic characteristics of 30 young men performing deep squat, bench press and hard pull maneuvers. The data of tibia were simulated with AnyBody 5.2 and ANSYS 19.2 to verify the authenticity. The result demonstrated that the appropriate force of the deep squat elbow joint, the hip joint and the knee joint is 40% 1RM, the appropriate force of the bench press is 40% 1RM and the appropriate force of the hard pull is 80% 1RM. The external force is the main factor of bone change. The mechanical characteristics of knee joint can be simulated after the Finite Element Analysis and the simulation of AnyBody model are verified.

Qualitŕ della vita e invecchiamento della popolazione. Materiali per un'ipotesi alternativa alla questione pensionistica

2009 ◽  
pp. 67-91
Author(s):  
Adele Bianco
Keyword(s):  
Quality Of Life ◽  
Life Quality ◽  
Main Idea ◽  
Living Condition ◽  
Climate And Environmental Change ◽  
Safety And Health ◽  
Positive Ageing ◽  
The Impact ◽  
Main Factor

The topic of this article is quality of life and ageing process specially focused on today young generations and their coming retirement situation. The main idea is that quality of life is increasing, that means longer, safer and better living condition; consequently positive ageing processes mean also reforming retirement sector. The hypothesis carried out in this paper is an alternative one. Despite of the positive trends, we describe how three main factor of nowadays life are, on the contrary, turning into worse condition the future of young generations and their coming life situation. Firstly we consider the socio-economic aspects, the impact on health and the implications connected with precarious work. Secondly we consider pollution and its effects on health, life quality and life expectation. Thirdly we pay attention about climate and environmental change and their effect on health, life quality and expectation. In conclusion, the retirement future of today young generations may be very different (worse) than expected. The paper in based on WHO, IPCC and European Agency for Safety and Health at Work data and reports.Key words: Young generations; Coming quality of life; Population ageing and future of retirement question.Parole chiave: Giovani generazioni; Qualitŕ della vita; Invecchiamento della popolazione e pensioni.

THE ROLE OF COW PROCESSING IN IMPROVEMENT MILK QUALITY

2018 ◽  
Vol 1 (1) ◽  
pp. 59-63
Author(s):  
G. A. Larionov ◽  
◽  
O. Yu. Сhecheneshkina ◽  
E. S. Yatrusheva ◽  
N. I. Yendierov ◽  
...  
Keyword(s):  
Somatic Cell Count ◽  
Somatic Cells ◽  
Cow Milk ◽  
Microbiological Contamination ◽  
High Quality ◽  
Quality Of Milk ◽  
Correct Understanding ◽  
Main Factor

The main factor of determining the level of sanitary and hygienic indicators of the quality of milk produced is the hygiene of milking cows. The study of the role of hygiene of milking is of great importance for a correct understanding of the ways of solving the problem of obtaining high quality milk. Special attention of scientists and practitioners in recent years are focused on the development and implementation of highly effective detergents and disinfectants in the production of milk of cows. Many researchers and practitioners have directed their work to developing measures to prevent the entry of pathogenic microflora into milk during and after milking cows. In spite of many researches carried out, aimed at controlling the number of somatic cells in milk with the use of different products based on lactic acid, chlorhexidine and iodine, the problem of high quality milk production remains unresolved. In our work results of researches on the use of probiotic means for treatment of udders of cows are given. Processing the udder of cows with probiotic means before milking by Skin Cleaner, after milking by PIP Cow Teat Cleaner reduced the amount of somatic cells in cow milk 12,8-84,0%. The use of probiotic means Biomastim lowed somatic cell count of 18,4-51,9%. Microbiological contamination of milk using probiotic means for processing the udder before milking Skin Cleaner, after milking PIP Cow Teat Cleaner decreased 4,9- 70,4 times. The application of probiotic means Biomastim after milking on the teats led to the decrease in milk of cows QMAFAnM 5,0-6,6 times.

INFRA-OBTURATOR TENSION SLING FOR URINARY INCONTINENCE TREATMENT

2019 ◽  
Vol 19 (03) ◽  
pp. 1950001
Author(s):  
YEONGJIN KIM ◽  
YOUNGJIN NA ◽  
SOOBYEONG KIM ◽  
JEONGYOON YI ◽  
BUMMO AHN
Keyword(s):  
Daily Life ◽  
Contact Point ◽  
Three Dimensional ◽  
Geometrical Model ◽  
Abdominal Pressure ◽  
Computed Tomography Images ◽  
Pubourethral Ligament ◽  
Element Simulation ◽  
Rotatory Motion

Stress incontinence occurs due to the inability to control an urge to urinate, which affects the quality of daily life. Although there is an existing therapeutics with polymer mesh tape, it is hard to fix around the urethra to restore the function of the pubourethral ligament. Therefore, in this research, an infra-obturator tension (IOT) sling was introduced to minimize the mobility of the bladder and urethra against intra-abdominal pressure. To verify the IOT performance, two different hypotheses were formulated: The hardness and volume of the IOT support the urethra and help prevent it from deforming by intra-abdominal pressure. The rotatory motion of the IOT can bend the urethra at the contact point and help restore the function of pubourethral ligament to increase vaginal tension. For the first hypothesis, a finite element simulation was conducted using three-dimensional geometrical model obtained by the computed tomography images of patients. For the second hypothesis, surgeons performed an IOT insertion operation and analyzed the sling rotation from the patients’ CT images (mean: 21∘). From the results, the mobility of the urethra was decreased because of IOT insertion. The mobility was also decreased because of the subsequent fibrotic changes from the encapsulation of the IOT.

Influence of Roller on Tooth Height of Internal Spline Formed by Spin-Forming

2012 ◽  
Vol 522 ◽  
pp. 268-271
Author(s):  
Ling Yan Sun ◽  
Qin Xiang Xia ◽  
Xiu Quan Cheng ◽  
Bang Yan Ye
Keyword(s):  
New Technology ◽  
Internal Surface ◽  
Height Distribution ◽  
Forming Force ◽  
Nose Radius ◽  
Forming Process ◽  
Element Simulation ◽  
Gear Manufacturing ◽  
Spinning Force

Spin-forming of part with internal tooth is a new technology of the near-net forming in gear manufacturing field. And the main purpose of the parts spin-forming is to shape teeth on the internal surface of blank. In order to improve the forming quality of internal tooth, the effect of roller on tooth height of spline was investigated by processing experiments and finite element simulation. The result indicates that, for full-radius roller, a large nose radius has also witnessed a discernible growth in spinning force and tooth height; considering the uniformity of tooth height distribution of spun part and decrease in forming force, the bio-conical roller is more suitable for this forming process

Sign in / Sign up

Export Citation Format

Share Document