scholarly journals Comparing Semantic Differential Methods in Affective Engineering Processes: A Case Study on Vehicle Instrument Panels

2020 ◽  
Vol 10 (14) ◽  
pp. 4751
Author(s):  
Gee Won Shin ◽  
Sunghwan Park ◽  
Yong Min Kim ◽  
Yushin Lee ◽  
Myung Hwan Yun
Keyword(s):  
Correlation Analysis ◽  
Repeated Measures ◽  
Evaluation Method ◽  
Correlation Coefficients ◽  
Semantic Differential ◽  
Affective Evaluation ◽  
Relative Evaluation ◽  
The Difference ◽  
Sample Pair

When developing a user-oriented product, it is crucial to consider users’ affective needs. Various semantic differential (SD) methods have been used to identify affect regarding materials, and this is the most important property in products. This study aims to determine which of the three conventional SD methods (absolute evaluation 1 [AE 1], absolute evaluation 2 [AE 2], or relative evaluation [RE]) is most effective for affective evaluation. Affective evaluation was performed for vehicle instrument panels by each of these three SD methods. Two quantitative analysis methods (correlation analysis and repeated-measures ANOVA) were used to examine the performance (sample distinguishability) of each evaluation method, and it was found that both AE 2 and RE produced better results than AE 1. The correlation coefficients and p-values in correlation analysis were slightly better for RE than for AE 2. In conclusion, an affective evaluation produced better results when pairwise samples (especially one sample pair) were presented, indicating that maintaining distinct samples is very important. The clearer the difference in comparison targets is, the more accurate the evaluation results.

Large Naval Ship Evaluation Method Attended by Multiple Experts

2014 ◽  
Vol 571-572 ◽  
pp. 299-302
Author(s):  
Yuan Hang Hou ◽  
Jia Ning Zhang ◽  
Chun Bo Zhen
Keyword(s):  
Evaluation Method ◽  
Evaluation Index System ◽  
New Method ◽  
Naval Ship ◽  
Expert’S Opinion ◽  
Numerical Computing ◽  
The Difference ◽  
Multiple Experts ◽  
Evaluation Platform

An integrating, coordinating and optimization for experts’ evaluate opinion method according to naval ship evaluation case study is researched. Ship projects evaluation index system is proposed pointing at large surface naval ship, meanwhile the weights of index of experts’ opinion and ship projects are identified. After combining the actual demand of evaluation with the algorithm, a sequence deviation estimating method is formed for estimating the difference between individual and group opinions. Thus a naval ship evaluation platform is proposed which could integrate, coordinate and optimize expert's opinion effectively. Calculation shows this new method system, which mixed the numerical computing and computer iteration technology together, could meet the actual demand of naval ship evaluation commendably. Not only can it retain each expert's original preference, but also consistent the consulting result rapidly. Thus the new method has great applicability in naval ship evaluating progress, with the ability of solving conflict among the expert group.

Measurement of Knee-Joint-Position Sense in Women with Genu Recurvatum

2000 ◽  
Vol 9 (1) ◽  
pp. 15-25 ◽  
Author(s):  
Janice K. Loudon
Keyword(s):  
Knee Joint ◽  
Outcome Measures ◽  
Repeated Measures ◽  
Pearson Correlation ◽  
Correlation Coefficients ◽  
Knee Extension ◽  
Position Sense ◽  
Joint Position Sense ◽  
Genu Recurvatum ◽  
The Difference

Context:Proprioception of the knee joint.Objective:To determine the difference in knee-joint-angle reproduction in women with and without genu recurvatum (GR).Design:Between-subjects.Setting:Clinic.Subjects:Twenty-four women divided into 2 groups according to their standing knee-extension angle.Main Outcome Measures:Each subject's ability to actively reproduce active positioning of 3 knee angles (10, 30, and 60°) was measured. Pearson correlation coefficients were calculated to determine correlation values for standing GR angle and absolute angular error (AAE). A1 -way repeated-measures MANOVA was computed to evaluate differences in group, angle, limb, and trial.Results:Standing GR angle correlated significantly to the AAE angle at 10° (r= .48). The high-recurvatum group consistently scored worse, with the highest error rate occurring at 10°.Conclusion:Individuals with GR might have diminished proprioceptive sense at end-range extension that could potentially lead to knee injury.

Evaluating Methods of Traditional Dances: Case Study in Nihon Buyo

2009 ◽  
Vol 41 (S1) ◽  
pp. 228-233
Author(s):  
Mieko Marumo ◽  
Yukitaka Shinoda ◽  
Yuki Mito
Keyword(s):  
Motion Capture ◽  
Evaluation Method ◽  
Semantic Differential ◽  
School Education ◽  
The Other ◽  
Evaluating Methods ◽  
Skill Evaluation ◽  
Scientific Pedagogy ◽  
Nihon Buyo

This paper proposes two evaluating methods of traditional dances to put traditional dances in school education, taking Nihon Buyo as an example. One is a skill evaluation method using motion capture equipment. Digitized data of movements could provide scientific pedagogy and appraisal in school education. The other is an impression evaluation method using Semantic Differential (SD) method. Impressions that spectators get from Nihon Buyo can be statistically and objectively evaluated. Though traditional dances have various styles, techniques, and representations, these two methods could be applied differently to understand them scientifically and put them in school education in perspective on a global basis.

EVALUASI PROYEKSI DEMAND BARANG DAN PENUMPANG PELABUHAN DI PROVINSI MALUKU

2019 ◽  
Vol 19 (2) ◽  
pp. 101-110
Author(s):  
Adrian Firdaus ◽  
M. Dwi Yoga Sutanto ◽  
Rajin Sihombing ◽  
M. Weldy Hermawan
Keyword(s):  
Time Series ◽  
Projection Method ◽  
Development Plan ◽  
Master Plan ◽  
Port Development ◽  
Loading And Unloading ◽  
The Difference ◽  
Existing Data

Abstract Every port in Indonesia must have a Port Master Plan that contains an integrated port development plan. This study discusses one important aspect in the preparation of the Port Master Plan, namely the projected movement of goods and passengers, which can be used as a reference in determining the need for facilities at each stage of port development. The case study was conducted at a port located in a district in Maluku Province and aims to evaluate the analysis of projected demand for goods and passengers occurring at the port. The projection method used is time series and econometric projection. The projection results are then compared with the existing data in 2018. The results of this study show that the econometric projection gives adequate results in predicting loading and unloading activities as well as the number of passenger arrival and departure in 2018. This is indicated by the difference in the percentage of projection results towards the existing data, which is smaller than 10%. Whereas for loading and unloading activities, time series projections with logarithmic trends give better results than econometric projections. Keywords: port, port master plan, port development, unloading activities  Abstrak Setiap pelabuhan di Indonesia harus memiliki sebuah Rencana Induk Pelabuhan yang memuat rencana pengem-bangan pelabuhan secara terpadu. Studi ini membahas salah satu aspek penting dalam penyusunan Rencana Induk Pelabuhan, yaitu proyeksi pergerakan barang dan penumpang, yang dapat dipakai sebagai acuan dalam penentuan kebutuhan fasilitas di setiap tahap pengembangan pelabuhan. Studi kasus dilakukan pada sebuah pelabuhan yang terletak di sebuah kabupaten di Provinsi Maluku dan bertujuan untuk melakukan evaluasi ter-hadap analisis proyeksi demand barang dan penumpang yang terjadi di pelabuhan tersebut. Metode proyeksi yang dipakai adalah proyeksi deret waktu dan ekonometrik. Hasil proyeksi selanjutnya dibandingkan dengan data eksisting tahun 2018. Hasil studi ini menunjukkan bahwa proyeksi ekonometrik memberikan hasil yang cukup baik dalam memprediksi aktivitas bongkar barang serta jumlah penumpang naik dan turun di tahun 2018. Hal ini diindikasikan dengan selisih persentase hasil proyeksi terhadap data eksisting yang lebih kecil dari 10%. Sedangkan untuk aktivitas muat barang, proyeksi deret waktu dengan tren logaritmik memberikan hasil yang lebih baik daripada proyeksi ekonometrik. Kata-kata kunci: pelabuhan, rencana induk pelabuhan, pengembangan pelauhan, aktivitas bongkar barang

Difference in taste of Japanese sugars

2015 ◽  
pp. 624-627
Author(s):  
Kiyoaki Miyasaka ◽  
Mizuki Mutsuura ◽  
Kohei Miyazaki ◽  
Masahiro Okuno ◽  
Masami Mizu ◽  
...  
Keyword(s):  
Sensory Evaluation ◽  
Evaluation Method ◽  
New Products ◽  
Processed Foods ◽  
White Crystal ◽  
Sensing System ◽  
Light Brown Crystal ◽  
Brown Crystal ◽  
Home Cooking ◽  
The Difference

Japanese traditional cuisine “Washoku” was registered as one of the intangible cultural heritages in December 2013. “Washoku” contains and requires large amount of sugar, therefore, sugar is an important seasoning in taste. Japanese have been using many kinds of sugar such as Granulated sugar, White soft sugar, Brown soft sugar, White crystal sugar and Light brown crystal sugar according to application, for both home cooking and processed foods. Mitsui Sugar is focusing on the difference in taste of sugars to develop new attractive sugar products. With a sensory evaluation method, trained panelists could recognize the difference between these sugars though it is quite difficult to explain. Therefore one attempte624-627d to detect the taste difference in these sugars by using a taste sensing system. The system comes with a human taste model membrane and can analyze the density and balance of several tastes such as sweetness, bitterness, umami** and saltiness. The accuracy of the sensing system was evaluated by comparing the results against the sensory evaluation method by trained panelists. The sensing system was able to detect the difference in taste of Japanese sugars, and the results from the sensing system seemed to match with the ones from the sensory evaluation method. The results were plotted on a taste map. This map will be helpful not only in showing the difference between the sugars, but also in explaining the characteristics of the new products.

Sugar factory audits, debottlenecking and efficiency improvement

2020 ◽  
pp. 607-612
Author(s):  
Bernard Coûteaux
Keyword(s):  
Evaluation Method ◽  
Predictive Modelling ◽  
Cane Sugar ◽  
Sugar Factory ◽  
Low Energy Consumption ◽  
Process Simulations ◽  
Capital Efficiency ◽  
Potential Improvement ◽  
Primary Focus

This paper elaborates on the key solutions offered by De Smet Engineers & Contractors (DSEC) to optimize the efficiency of cane sugar producing and processing facilities. In order to meet customer needs, DSEC offers proprietary predictive models built using the latest versions of specialized software. These models allow factory managers to envision the whole picture of increased operational and capital efficiency before it becomes reality. An integrated energy model and the CAPEX/OPEX evaluation method are discussed as ways to estimate and optimize costs, both for new greenfield projects and revamping of existing factories. The models demonstrate that factory capacities can be successfully increased using equipment that is already available. Special attention is paid to crystallization and centrifugation process simulations and the potential improvement of the global energy balance. One case study shows the transformation of a beet sugar factory into a refinery to process raw cane sugar after beet crop season and the second case shows the integration of a refinery into a cane sugar factory. The primary focus of the article is optimization of the technological process through predictive modelling. DSEC’s suggested solutions, which lead to great improvements in a plant’s efficiency and its ability to obtain very low energy consumption, are discussed.

Chemometric Analysis for the Classification of some Groups of Drugs with Divergent Pharmacological Activity on the Basis of some Chromatographic and Molecular Modeling Parameters

2018 ◽  
Vol 21 (2) ◽  
pp. 125-137
Author(s):  
Jolanta Stasiak ◽  
Marcin Koba ◽  
Marcin Gackowski ◽  
Tomasz Baczek
Keyword(s):  
Correlation Analysis ◽  
Pharmacological Activity ◽  
Correlation Coefficients ◽  
Principal Component ◽  
Cardiovascular Drugs ◽  
New Drugs ◽  
Analgesic Drugs ◽  
Starting Point ◽  
Chromatographic Parameters

Aim and Objective: In this study, chemometric methods as correlation analysis, cluster analysis (CA), principal component analysis (PCA), and factor analysis (FA) have been used to reduce the number of chromatographic parameters (logk/logkw) and various (e.g., 0D, 1D, 2D, 3D) structural descriptors for three different groups of drugs, such as 12 analgesic drugs, 11 cardiovascular drugs and 36 “other” compounds and especially to choose the most important data of them. Material and Methods: All chemometric analyses have been carried out, graphically presented and also discussed for each group of drugs. At first, compounds’ structural and chromatographic parameters were correlated. The best results of correlation analysis were as follows: correlation coefficients like R = 0.93, R = 0.88, R = 0.91 for cardiac medications, analgesic drugs, and 36 “other” compounds, respectively. Next, part of molecular and HPLC experimental data from each group of drugs were submitted to FA/PCA and CA techniques. Results: Almost all results obtained by FA or PCA, and total data variance, from all analyzed parameters (experimental and calculated) were explained by first two/three factors: 84.28%, 76.38 %, 69.71% for cardiovascular drugs, for analgesic drugs and for 36 “other” compounds, respectively. Compounds clustering by CA method had similar characteristic as those obtained by FA/PCA. In our paper, statistical classification of mentioned drugs performed has been widely characterized and discussed in case of their molecular structure and pharmacological activity. Conclusion: Proposed QSAR strategy of reduced number of parameters could be useful starting point for further statistical analysis as well as support for designing new drugs and predicting their possible activity.

The Rapid Iterative Test and Evaluation Method (RITE)

2018 ◽  
Author(s):  
Michael C. Medlock
Keyword(s):  
Evaluation Method ◽  
Test And Evaluation ◽  
Original Case ◽  
Definition Of

This chapter begins with a discussion of the philosophy and then definition of the RITE method. It then delves into the benefits of this method and provides practical notes on running RITE tests effectively. The chapter concludes with an overview of the original case study behind the 2002 article documenting this method.

scholarly journals Force Generation on the Hallux Is More Affected by the Ankle Joint Angle than the Lesser Toes: An In Vivo Human Study

Biology ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 48
Author(s):  
Junya Saeki ◽  
Soichiro Iwanuma ◽  
Suguru Torii
Keyword(s):  
Repeated Measures ◽  
Joint Angle ◽  
Plantar Flexion ◽  
Human Study ◽  
Force Generation ◽  
Functional Difference ◽  
Multiple Comparison Test ◽  
The Difference ◽  
Metatarsophalangeal Joints

The structure of the first toe is independent of that of the other toes, while the functional difference remains unclear. The purpose of this study was to investigate the difference in the force generation characteristics between the plantar-flexion of the first and second–fifth metatarsophalangeal joints (MTPJs) by comparing the maximal voluntary plantar-flexion torques (MVC torque) at different MTPJs and ankle positions. The MVC torques of the first and second–fifth MTPJs were measured at 0°, 15°, 30°, and 45° dorsiflexed positions of the MTPJs, and at 20° plantar-flexed, neutral, and 20° dorsiflexed positions of the ankle. Two-way repeated measures analyses of variance with Holm’s multiple comparison test (MTPJ position × ankle position) were performed. When the MTPJ was dorsiflexed at 0°, 15°, and 30°, the MVC torque of the first MTPJ when the ankle was dorsiflexed at 20° was higher than that when the ankle was plantar-flexed at 20°. However, the ankle position had no significant effect on the MVC torque of the second–fifth MTPJ. Thus, the MVC torque of the first MTPJ was more affected by the ankle position than the second–fifth MTPJs.

scholarly journals Estimating and reporting treatment effects in clinical trials for weight management: using estimands to interpret effects of intercurrent events and missing data

2021 ◽  
Author(s):  
Sean Wharton ◽  
Arne Astrup ◽  
Lars Endahl ◽  
Michael E. J. Lean ◽  
Altynai Satylganova ◽  
...  
Keyword(s):  
Clinical Trials ◽  
Missing Data ◽  
Weight Management ◽  
Treatment Effect ◽  
Repeated Measures ◽  
Treatment Effects ◽  
Randomized Clinical Trials ◽  
Weight Losses ◽  
The Difference ◽  
Treatment Of Obesity

AbstractIn the approval process for new weight management therapies, regulators typically require estimates of effect size. Usually, as with other drug evaluations, the placebo-adjusted treatment effect (i.e., the difference between weight losses with pharmacotherapy and placebo, when given as an adjunct to lifestyle intervention) is provided from data in randomized clinical trials (RCTs). At first glance, this may seem appropriate and straightforward. However, weight loss is not a simple direct drug effect, but is also mediated by other factors such as changes in diet and physical activity. Interpreting observed differences between treatment arms in weight management RCTs can be challenging; intercurrent events that occur after treatment initiation may affect the interpretation of results at the end of treatment. Utilizing estimands helps to address these uncertainties and improve transparency in clinical trial reporting by better matching the treatment-effect estimates to the scientific and/or clinical questions of interest. Estimands aim to provide an indication of trial outcomes that might be expected in the same patients under different conditions. This article reviews how intercurrent events during weight management trials can influence placebo-adjusted treatment effects, depending on how they are accounted for and how missing data are handled. The most appropriate method for statistical analysis is also discussed, including assessment of the last observation carried forward approach, and more recent methods, such as multiple imputation and mixed models for repeated measures. The use of each of these approaches, and that of estimands, is discussed in the context of the SCALE phase 3a and 3b RCTs evaluating the effect of liraglutide 3.0 mg for the treatment of obesity.

Sign in / Sign up

Export Citation Format

Share Document