scholarly journals Wind-Driven Hydrodynamics in the Shallow, Micro-Tidal Estuary at the Fangar Bay (Ebro Delta, NW Mediterranean Sea)

2020 ◽  
Vol 10 (19) ◽  
pp. 6952
Author(s):  
Marta F-Pedrera Balsells ◽  
Manel Grifoll ◽  
Manuel Espino ◽  
Pablo Cerralbo ◽  
Agustín Sánchez-Arcilla
Keyword(s):  
Numerical Experiments ◽  
Field Data ◽  
Three Dimensional ◽  
Estuarine Circulation ◽  
Water Circulation ◽  
Ebro Delta ◽  
Small Scale ◽  
Strong Wind ◽  
Axially Symmetric ◽  
Nw Mediterranean

This article investigates water circulation in small-scale (~10 km2), shallow (less than 4 m) and micro-tidal estuaries. The research characterizes the hydrodynamic wind response in these domains using field data from Fangar Bay (Ebro Delta) jointly with three-dimensional numerical experiments in an idealized domain. During calm periods, field data in Fangar Bay show complex water circulation in the inner part of the estuary owing to its shallow depths and positive estuarine circulation in the mouth. Numerical experiments are conducted to investigate wind-induced water circulation due to laterally varying bathymetry. For intense up-bay wind conditions (wind intensities greater than 9 m·s−1), an axially symmetric transverse structure occurs with outflow in the central channel axis and inflow in the lateral shallow areas. These numerical results explain the water circulation observed in Fangar Bay during strong wind episodes, highlighting the role of the bathymetry in a small-scale environment. During these episodes, the water column tends to homogenize rapidly in Fangar Bay, breaking the stratification and disrupting estuarine circulation, consistent with other observations in similar domains.

Influence of the hydrodynamics in spatio-temporal variability of clorophyll a in a small-scale and microtidal bay: Fangar Bay case (Ebro Delta)

2021 ◽  
Author(s):  
Marta F-Pedrera Balsells ◽  
Manel Grifoll ◽  
Margarita Fernández-Tejedor ◽  
Manuel Espino ◽  
Agustín Sánchez-Arcilla
Keyword(s):  
Water Column ◽  
Temporal Variability ◽  
Light Availability ◽  
Ebro Delta ◽  
Small Scale ◽  
Strong Wind ◽  
Chl A ◽  
Coastal Bays ◽  
Biological Variables ◽  
Field Campaigns

<p>Estuaries and coastal bays are areas of large spatial-temporal variability in physical and biological variables due to environmental factors such as local wind, light availability, freshwater inputs or tides. The physical characteristics of an estuary affect its hydrodynamics. These in turn modify the behaviour of biological variables such as the concentration of chlorophyll a (Chl a). In a small-scale, micro tidal bay such as the Fangar Bay (Ebro Delta), hydrodynamics is influenced above all by local winds, as well as by fresh water contributions. The results of two field campaigns and Sentinel-2 images show how the concentration of Chl a is affected by strong wind episodes typical of this area (NW-E winds). With these episodes of strong wind (> 10 m-s-1) mixing occurs in the water column causing an increase in the concentration of Chl a. On the other hand, with sea breezes (< 6 m-s-1) the water column is stratified causing a decrease in the Chl a concentration. However, the spatial-temporal variability of Chl a in small-scale estuaries and coastal bays is quite complex due to the many factors involved and deserves more intensive field campaigns and additional numerical modelling efforts.</p>

scholarly journals Numerical Simulation of a Lee Wave Case over Three-Dimensional Mountainous Terrain under Strong Wind Condition

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
Lei Li ◽  
P. W. Chan ◽  
Lijie Zhang ◽  
Fei Hu
Keyword(s):  
Mesoscale Model ◽  
Three Dimensional ◽  
Wave Structure ◽  
Energy Utilization ◽  
Small Scale ◽  
Mountainous Terrain ◽  
Water Tank ◽  
Wind Condition ◽  
Strong Wind ◽  
Lee Wave

This study of a lee wave event over three-dimensional (3D) mountainous terrain in Lantau Island, Hong Kong, using a simulation combining mesoscale model and computational fluid dynamics (CFD) model has shown that (1) 3D steep mountainous terrain can trigger small scale lee waves under strong wind condition, and the horizontal extent of the wave structure is in a dimension of few kilometers and corresponds to the dimension of the horizontal cross-section of the mountain; (2) the life cycle of the lee wave is short, and the wave structures will continuously form roughly in the same location, then gradually move downstream, and dissipate over time; (3) the lee wave triggered by the mountainous terrain in this case can be categorized into “nonsymmetric vortex shedding” or “turbulent wake,” as defined before based on water tank experiments; (4) the magnitude of the wave is related to strength of wind shear. This study also shows that a simulation combining mesoscale model and CFD can capture complex wave structure in the boundary layer over realistic 3D steep terrain, and have a potential value for operational jobs on air traffic warning, wind energy utilization, and atmospheric environmental assessment.

scholarly journals Flux Separation in Photospheric Magnetoconvection

2001 ◽  
Vol 203 ◽  
pp. 219-221 ◽  
Author(s):  
N. O. Weiss ◽  
M. R. E. Proctor
Keyword(s):  
Magnetic Field ◽  
Magnetic Flux ◽  
Numerical Experiments ◽  
Large Scale ◽  
Initial Conditions ◽  
Three Dimensional ◽  
Small Scale ◽  
The Sun ◽  
Intermediate Regime ◽  
Magnetic Features

Numerical experiments on three-dimensional magnetoconvection in a stratified compressible layer reveal a range of different patterns, depending on the strength of the imposed magnetic field. As the field is decreased there is a transition from small-scale plumes, in the magnetically dominated regime, to large-scale vigorous plumes when the field is dominated by the motion. In the intermediate regime magnetic flux separates from the motion, so that there are almost field-free regions, with clusters of vigorous plumes, surrounded by regions where the Lorentz force is strong enough to control the dynamics. There is a range of field strengths where either small-scale plumes or flux-separated solutions can persist, depending on initial conditions for the computation. These results can be related to magnetic features at the surface of the Sun.

scholarly journals Observations and Numerical Simulations of Subrotor Vortices during T-REX

2009 ◽  
Vol 66 (5) ◽  
pp. 1229-1249 ◽  
Author(s):  
James D. Doyle ◽  
Vanda Grubišić ◽  
William O. J. Brown ◽  
Stephan F. J. De Wekker ◽  
Andreas Dörnbrack ◽  
...  
Keyword(s):  
Numerical Simulations ◽  
Wind Shear ◽  
Three Dimensional ◽  
Vertical Wind Shear ◽  
Leading Edge ◽  
Vortex Sheet ◽  
Small Scale ◽  
Wind Profiler ◽  
Strong Wind ◽  
Transient Nature

Abstract High-resolution observations from scanning Doppler and aerosol lidars, wind profiler radars, as well as surface and aircraft measurements during the Terrain-induced Rotor Experiment (T-REX) provide the first comprehensive documentation of small-scale intense vortices associated with atmospheric rotors that form in the lee of mountainous terrain. Although rotors are already recognized as potential hazards for aircraft, it is proposed that these small-scale vortices, or subrotors, are the most dangerous features because of strong wind shear and the transient nature of the vortices. A life cycle of a subrotor event is captured by scanning Doppler and aerosol lidars over a 5-min period. The lidars depict an amplifying vortex, with a characteristic length scale of ∼500–1000 m, that overturns and intensifies to a maximum spanwise vorticity greater than 0.2 s−1. Radar wind profiler observations document a series of vortices, characterized by updraft/downdraft couplets and regions of enhanced reversed flow, that are generated in a layer of strong vertical wind shear and subcritical Richardson number. The observations and numerical simulations reveal that turbulent subrotors occur most frequently along the leading edge of an elevated sheet of horizontal vorticity that is a manifestation of boundary layer shear and separation along the lee slopes. As the subrotors break from the vortex sheet, intensification occurs through vortex stretching and in some cases tilting processes related to three-dimensional turbulent mixing. The subrotors and ambient vortex sheet are shown to intensify through a modest increase in the upstream inversion strength, which illustrates the predictability challenges for the turbulent characterization of rotors.

Extrusion-Based 3D Printing for Pharmaceuticals: Contemporary Research and Applications

2019 ◽  
Vol 24 (42) ◽  
pp. 4991-5008 ◽  
Author(s):  
Mohammed S. Algahtani ◽  
Abdul Aleem Mohammed ◽  
Javed Ahmad
Keyword(s):  
Cosmetic Surgery ◽  
Fused Deposition Modeling ◽  
Personalised Medicine ◽  
Organ Transplant ◽  
Three Dimensional ◽  
Dosage Forms ◽  
Release Profile ◽  
Small Scale ◽  
Drug Release Profile ◽  
Fused Deposition

Three-dimensional printing (3DP) has a significant impact on organ transplant, cosmetic surgery, surgical planning, prosthetics and other medical fields. Recently, 3 DP attracted the attention as a promising method for the production of small-scale drug production. The knowledge expansion about the population differences in metabolism and genetics grows the need for personalised medicine substantially. In personalised medicine, the patient receives a tailored dose and the release profile is based on his pharmacokinetics data. 3 DP is expected to be one of the leading solutions for the personalisation of the drug dispensing. This technology can fabricate a drug-device with complicated geometries and fillings to obtain the needed drug release profile. The extrusionbased 3 DP is the most explored method for investigating the feasibility of the technology to produce a novel dosage form with properties that are difficult to achieve using the conventional industrial methods. Extrusionbased 3 DP is divided into two techniques, the semi-solid extrusion (SSE) and the fused deposition modeling (FDM). This review aims to explain the extrusion principles behind the two techniques and discuss their capabilities to fabricate novel dosage forms. The advantages and limitations observed through the application of SSE and FDM for fabrication of drug dosage forms were discussed in this review. Further exploration and development are required to implement this technology in the healthcare frontline for more effective and personalised treatment.

scholarly journals Land Subsidence Estimation for Aquifer Drainage Induced by Underground Mining

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4658
Author(s):  
Artur Guzy ◽  
Wojciech T. Witkowski
Keyword(s):  
Environmental Impact ◽  
Land Subsidence ◽  
Field Data ◽  
Underground Mining ◽  
Small Scale ◽  
Aquifer System ◽  
Maximum Value ◽  
The Impact ◽  
Method Model ◽  
Impact Of Mining

Land subsidence caused by groundwater withdrawal induced by mining is a relatively unknown phenomenon. This is primarily due to the small scale of such movements compared to the land subsidence caused by deposit extraction. Nonetheless, the environmental impact of drainage-related land subsidence remains underestimated. The research was carried out in the “Bogdanka” coal mine in Poland. First, the historical impact of mining on land subsidence and groundwater head changes was investigated. The outcomes of these studies were used to construct the influence method model. With field data, our model was successfully calibrated and validated. Finally, it was used for land subsidence estimation for 2030. As per the findings, the field of mining exploitation has the greatest land subsidence. In 2014, the maximum value of the phenomenon was 0.313 cm. However, this value will reach 0.364 m by 2030. The spatial extent of land subsidence caused by mining-induced drainage extends up to 20 km beyond the mining area’s boundaries. The presented model provided land subsidence patterns without the need for a complex numerical subsidence model. As a result, the method presented can be effectively used for land subsidence regulation plans considering the impact of mining on the aquifer system.

scholarly journals Imaging of bi-anisotropic periodic structures from electromagnetic near-field data

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Dinh-Liem Nguyen ◽  
Trung Truong
Keyword(s):  
Inverse Scattering ◽  
Maxwell Equations ◽  
Field Data ◽  
Periodic Structures ◽  
Near Field ◽  
Scattering Problem ◽  
Three Dimensional ◽  
Inverse Scattering Problem ◽  
Factorization Method ◽  
Unique Determination

AbstractThis paper is concerned with the inverse scattering problem for the three-dimensional Maxwell equations in bi-anisotropic periodic structures. The inverse scattering problem aims to determine the shape of bi-anisotropic periodic scatterers from electromagnetic near-field data at a fixed frequency. The factorization method is studied as an analytical and numerical tool for solving the inverse problem. We provide a rigorous justification of the factorization method which results in the unique determination and a fast imaging algorithm for the periodic scatterer. Numerical examples for imaging three-dimensional periodic structures are presented to examine the efficiency of the method.

scholarly journals Quantification of Measurement and Model Effects in Monopile Foundation Scour Protection Experiments

2021 ◽  
Vol 9 (6) ◽  
pp. 585
Author(s):  
Minghao Wu ◽  
Leen De Vos ◽  
Carlos Emilio Arboleda Chavez ◽  
Vasiliki Stratigaki ◽  
Maximilian Streicher ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Flow Field ◽  
Three Dimensional ◽  
Small Scale ◽  
Maximum Wave Height ◽  
Chaotic Flow ◽  
The Mean ◽  
Scour Protection ◽  
Damage Number ◽  
Measurement Effects

The present work introduces an analysis of the measurement and model effects that exist in monopile scour protection experiments with repeated small scale tests. The damage erosion is calculated using the three dimensional global damage number S3D and subarea damage number S3D,i. Results show that the standard deviation of the global damage number σ(S3D)=0.257 and is approximately 20% of the mean S3D, and the standard deviation of the subarea damage number σ(S3D,i)=0.42 which can be up to 33% of the mean S3D. The irreproducible maximum wave height, chaotic flow field and non-repeatable armour layer construction are regarded as the main reasons for the occurrence of strong model effects. The measurement effects are limited to σ(S3D)=0.039 and σ(S3D,i)=0.083, which are minor compared to the model effects.

scholarly journals Impact of mechanized clam dredging on the discarded megabenthic fauna on the Catalan coast (NW Mediterranean)

2021 ◽  
pp. 1-9
Author(s):  
Marc Baeta ◽  
Claudia Rubio ◽  
Françoise Breton
Keyword(s):  
Small Scale ◽  
Fishing Activity ◽  
Lethal Damage ◽  
Catalan Coast ◽  
Nw Mediterranean ◽  
Chamelea Gallina ◽  
Level Scale ◽  
Nw Mediterranean Sea ◽  
The Impact ◽  
Partial Damage

Abstract There is an important small-scale fishery using mechanized dredges and targeting clams (mainly wedge clam Donax trunculus and striped venus clam Chamelea gallina) along the Catalan coast (NW Mediterranean Sea). This study evaluated for the first time the discards and impact of mechanized clam dredging on the Catalan coast. To this end, three surveys were performed on board standard clam vessels (September and November 2016 and January 2017). Surveys were conducted in the three main clam fishing areas (Rosas Bay, South Barcelona and Ebro Delta). The composition of discards and the impact caused to discarded species was assessed using a three-level scale (undamaged; minor or partial damage; and lethal damage). Our study revealed that a large proportion of the catch (between 67–82% weight) is discarded. Even though about 63% of the discarded species were undamaged, 11% showed minor or partial damage and 26% lethal damage. Infaunal and epifaunal species with soft-body or fragile shells were the most impacted by the fishing activity (e.g. the sea urchin Echinocardium mediterraneum (~89%) and the bivalve Ensis minor (~74%)). Our results showed different levels of impact by target species and fishing area.

scholarly journals Experimental and Numerical Investigation about Small Clearance Journal Bearings under Static Load Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Carlo Alberto Niccolini Marmont Du Haut Champ ◽  
Fabrizio Stefani ◽  
Paolo Silvestri
Keyword(s):  
Three Dimensional ◽  
Journal Bearings ◽  
Radial Clearance ◽  
Small Scale ◽  
Test Rig ◽  
Small Clearance ◽  
Dimensional Simulation ◽  
Dynamic Loading Conditions ◽  
Static And Dynamic Loading ◽  
Good Agreement

The aim of the present research is to characterize both experimentally and numerically journal bearings with low radial clearances for rotors in small-scale applications (e.g., microgas turbines); their diameter is in the order of ten millimetres, leading to very small dimensional clearances when the typical relative ones (order of 1/1000) are employed; investigating this particular class of journal bearings under static and dynamic loading conditions represents something unexplored. To this goal, a suitable test rig was designed and the performance of its bearings was investigated under steady load. For the sake of comparison, numerical simulations of the lubrication were also performed by means of a simplified model. The original test rig adopted is a commercial rotor kit (RK), but substantial modifications were carried out in order to allow significant measurements. Indeed, the relative radial clearance of RK4 RK bearings is about 2/100, while it is around 1/1000 in industrial bearings. Therefore, the same original RK bearings are employed in this new test rig, but a new shaft was designed to reduce their original clearance. The new custom shaft allows to study bearing behaviour for different clearances, since it is equipped with interchangeable journals. Experimental data obtained by this test rig are then compared with further results of more sophisticated simulations. They were carried out by means of an in-house developed finite element (FEM) code, suitable for thermoelasto-hydrodynamic (TEHD) analysis of journal bearings both in static and dynamic conditions. In this paper, bearing static performances are studied to assess the reliability of the experimental journal location predictions by comparing them with the ones coming from already validated numerical codes. Such comparisons are presented both for large and small clearance bearings of original and modified RKs, respectively. Good agreement is found only for the modified RK equipped with small clearance bearings (relative radial clearance 8/1000), as expected. In comparison with two-dimensional lubrication analysis, three-dimensional simulation improves prediction of journal location and correlation with experimental results.

Sign in / Sign up

Export Citation Format

Share Document