scholarly journals Numerical Simulation on Spatial-Frequency Domain Imaging for Estimating Optical Absorption and Scattering Properties of Two-Layered Horticultural Products

2021 ◽  
Vol 11 (2) ◽  
pp. 617
Author(s):  
Dong Hu ◽  
Yuping Huang ◽  
Qiang Zhang ◽  
Lijian Yao ◽  
Zidong Yang ◽  
...  
Keyword(s):  
Optical Properties ◽  
Optical Property ◽  
Optical Absorption ◽  
Spatial Frequency ◽  
Estimation Accuracy ◽  
Property Estimation ◽  
Spatial Frequencies ◽  
Stepwise Method ◽  
Horticultural Products ◽  
Layered Samples

Spatial-frequency domain imaging (SFDI) is a wide-field, noncontact, and label-free imaging modality that is currently being explored as a new means for estimating optical absorption and scattering properties of two-layered turbid materials. The accuracy of SFDI for optical property estimation, however, depends on light transfer model and inverse algorithm. This study was therefore aimed at providing theoretical analyses of the diffusion model and inverse algorithm through numerical simulation, so as to evaluate the potential for estimating optical absorption and reduced scattering coefficients of two-layered horticultural products. The effect of varying optical properties on reflectance prediction was first simulated, which indicated that there is good separation in diffuse reflectance over a large range of spatial frequencies for different reduced scattering values in the top layer, whereas there is less separation in diffuse reflectance for different values of absorption in the top layer, and even less separation for optical properties in the bottom layer. To implement the nonlinear least-square method for extracting the optical properties of two-layered samples from Monte Carlo-generated reflectance, five curve fitting strategies with different constrained parameters were conducted and compared. The results confirmed that estimation accuracy improved as fewer variables were to be estimated each time. A stepwise method was thus suggested for estimating optical properties of two-layered samples. Four factors influencing optical property estimation of the top layer, which is the basis for accurately implementing the stepwise method, were investigated by generating absolute error contour maps. Finally, the relationship between light penetration depth and spatial frequency was studied. The results showed that penetration depth decreased with the increased spatial frequency and also optical properties, suggesting that appropriate selection of spatial frequencies for a stepwise method to estimate optical properties from two-layered samples provides potential for estimation accuracy improvement. This work lays a foundation for improving optical property estimation of two-layered horticultural products using SFDI.

scholarly journals Spatial-Frequency Domain Imaging: An Emerging Depth-Varying and Wide-Field Technique for Optical Property Measurement of Biological Tissues

Photonics ◽  
2021 ◽  
Vol 8 (5) ◽  
pp. 162
Author(s):  
Zhizhong Sun ◽  
Dong Hu ◽  
Zhong Wang ◽  
Lijuan Xie ◽  
Yibin Ying
Keyword(s):  
Optical Properties ◽  
Optical Property ◽  
Spatial Frequency ◽  
Frequency Domain ◽  
Measurement Data ◽  
Biological Tissues ◽  
Wide Field ◽  
Food And Agriculture ◽  
Spatial Frequency Domain Imaging ◽  
Spatial Frequency Domain

Measurement of optical properties is critical for understanding light-tissue interaction, properly interpreting measurement data, and gaining better knowledge of tissue physicochemical properties. However, conventional optical measuring techniques are limited in point measurement, which partly hinders the applications on characterizing spatial distribution and inhomogeneity of optical properties of biological tissues. Spatial-frequency domain imaging (SFDI), as an emerging non-contact, depth-varying and wide-field optical imaging technique, is capable of measuring the optical properties in a wide field-of-view on a pixel-by-pixel basis. This review first describes the typical SFDI system and the principle for estimating optical properties using the SFDI technique. Then, the applications of SFDI in the fields of biomedicine, as well as food and agriculture, are reviewed, including burn assessment, skin tissue evaluation, tumor tissue detection, brain tissue monitoring, and quality evaluation of agro-products. Finally, a discussion on the challenges and future perspectives of SFDI for optical property estimation is presented.

Optical Properties of Sputtered Silver Granular Films

2005 ◽  
Vol 480-481 ◽  
pp. 287-292 ◽  
Author(s):  
S.E. Paje ◽  
F. Teran ◽  
J.M. Riveiro ◽  
J. Llopis ◽  
M.A. García ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Optical Properties ◽  
Optical Absorption ◽  
Surface Morphology ◽  
Silver Clusters ◽  
Plasmon Excitation ◽  
Granular Films ◽  
Silver Films ◽  
Atomic Force ◽  
Atomic Force Micrographs

In this research we study optical absorption and morphology of silver films prepared with a sputtering method. Silver granular films are obtained on a glass substrate for films with thickness smaller than about 60 Å. Superficial silver clusters of around 100 nm in diameter are clearly seen in the atomic force micrographs. The absorption of these samples are characterized by plasmon excitation in the 450-650 nm spectral range, which differs from the known excitation of silver nanoparticles fabricated by different techniques. The optical absorption of silver granular films depend on sputtering conditions like substrate temperature or deposition rate and correlates with the surface morphology.

scholarly journals Tuning the optoelectronic properties of hematite with rhodium doping for photoelectrochemical water splitting using density functional theory approach

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Abdur Rauf ◽  
Muhammad Adil ◽  
Shabeer Ahmad Mian ◽  
Gul Rahman ◽  
Ejaz Ahmed ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Optical Properties ◽  
Optical Absorption ◽  
Water Splitting ◽  
Density Functional ◽  
Formation Energy ◽  
Visible Region ◽  
Photoelectrochemical Water Splitting ◽  
Theory Approach ◽  
Functional Theory

AbstractHematite (Fe2O3) is one of the best candidates for photoelectrochemical water splitting due to its abundance and suitable bandgap. However, its efficiency is mostly impeded due to the intrinsically low conductivity and poor light absorption. In this study, we targeted this intrinsic behavior to investigate the thermodynamic stability, photoconductivity and optical properties of rhodium doped hematite using density functional theory. The calculated formation energy of pristine and rhodium doped hematite was − 4.47 eV and − 5.34 eV respectively, suggesting that the doped material is thermodynamically more stable. The DFT results established that the bandgap of doped hematite narrowed down to the lower edge (1.61 eV) in the visible region which enhanced the optical absorption and photoconductivity of the material. Moreover, doped hematite has the ability to absorb a broad spectrum (250–800) nm. The enhanced optical absorption boosted the photocurrent and incident photon to current efficiency. The calculated results also showed that the incorporation of rhodium in hematite induced a redshift in optical properties.

scholarly journals Comparative Study on Electronic Structure and Optical Properties of α-Fe2O3, Ag/α-Fe2O3 and S/α-Fe2O3

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 424
Author(s):  
Cuihua Zhao ◽  
Baishi Li ◽  
Xi Zhou ◽  
Jianhua Chen ◽  
Hongqun Tang
Keyword(s):  
Optical Properties ◽  
Optical Absorption ◽  
Electronic Structures ◽  
Density Functional ◽  
Peak Strength ◽  
Visible Range ◽  
High Symmetry ◽  
Functional Theory ◽  
Optical Absorption Peak ◽  
Calculation Results

The electronic structures and optical properties of pure, Ag-doped and S-doped α-Fe2O3 were studied using density functional theory (DFT). The calculation results show that the structure of α-Fe2O3 crystal changes after Ag and S doping, which leads to the different points of the high symmetry of Ag-doped and S-doped α-Fe2O3 with that of pure α-Fe2O3 in the energy band, as well as different Brillouin paths. In addition, the band gap of α-Fe2O3 becomes smaller after Ag and S doping, and the optical absorption peak shifts slightly toward the short wavelength, with the increased peak strength of S/α-Fe2O3 and the decreased peak strength of Ag/α-Fe2O3. However, the optical absorption in the visible range is enhanced after Ag and S doping compared with that of pure α-Fe2O3 when the wavelength is greater than 380 nm, and the optical absorption of S-doped α-Fe2O3 is stronger than that of Ag-doped α-Fe2O3.

LINEAR AND NONLINEAR INTERSUBBAND OPTICAL ABSORPTION OF FINITE AND INFINITE SEMI-PARABOLIC QUANTUM WELLS

2011 ◽  
Vol 25 (07) ◽  
pp. 497-507 ◽  
Author(s):  
M. J. KARIMI ◽  
A. KESHAVARZ ◽  
A. POOSTFORUSH
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Optical Absorption ◽  
Quantum Well ◽  
Quantum Wells ◽  
Resonant Peak ◽  
Energy Eigenvalues ◽  
Finite Case ◽  
Infinite Case ◽  
Index Changes

In this work, the optical absorption coefficients and the refractive index changes for the infinite and finite semi-parabolic quantum well are calculated. Numerical calculations are performed for typical GaAs / Al x Ga 1-x As semi-parabolic quantum well. The energy eigenvalues and eigenfunctions of these systems are calculated numerically. Optical properties are obtained using the compact density matrix approach. Results show that the energy eigenvalues and the matrix elements of the infinite and finite cases are different. The calculations reveal that the resonant peaks of the optical properties of the finite case occur at lower values of the incident photon energy with respect to the infinite case. Results indicate that the maximum value of the refractive index changes for the finite case are greater than that of the infinite case. Our calculations also show that in contrast to the infinite case, the resonant peak value of the total absorption coefficient in the case of the finite well is a non-monotonic function of the semi-parabolic confinement frequency.

Harmonic basis functions for spatial coding in the cat striate cortex

1989 ◽  
Vol 3 (4) ◽  
pp. 351-363 ◽  
Author(s):  
V. D. Glezer ◽  
V. V. Yakovlev ◽  
V. E. Gauzelman
Keyword(s):  
Spatial Frequency ◽  
Striate Cortex ◽  
Weighting Function ◽  
Discrete Distribution ◽  
Basis Functions ◽  
Spatial Coding ◽  
Central Visual Field ◽  
Spatial Frequencies ◽  
The Absolute ◽  
Number Of Cycles

AbstractThe number of subregions in the activity profiles of simple cells varies in different cells from 2–8; that is, the number of cycles in the weighting function varies from 1–4. The distribution of receptive-field (RF) sizes at eccentricities of 0-6 deg are clustered at half-octave intervals and form a discrete distribution with maxima at 0.62, 0.9, 1.24, 1.8, 2.48, and 3.4 deg. The spatial frequencies to which the cells are tuned are also clustered at half-octave intervals, forming a discrete distribution peaking at 0.45, 0.69, 0.9, 1.35, 1.88, 2.7, 3.8, and 5.6 cycles/deg. If we divide the RF sizes by the size of the period of the subregions, then the average indices of complexity (really existing) or the number of cycles in the weighting function form (after normalization) the sequences: 1, 1.41, 2.0, 2.9, 4.15.The relation between the bandwidth of the spatial-frequency characteristic and the optimal spatial frequency is in accordance with predictions of the Fourier hypothesis. The absolute bandwidth does not change with the number of cycles/module. This means that inside the module the absolute bandwidth does not change with the number of the harmonic. The results allow us to suggest the following. A module of the striate cortex, which is a group of cells with RFs of equal size projected onto the same area of central visual field, accounts for the Fourier description of the image. The basis functions of the module are composed of four harmonics only, irrespective of size and position of the module.Besides linear cells (sinusoidal and cosinusoidal elements), the module contains nonlinear cells, performing a nonlinear summation of the responses of sinusoidal and cosinusoidal elements. Such cells are characterized by an index of complexity which is more than the number of cycles in the weighting function and by marked overlap of ON and OFF zones. The analysis of organization suggests that the cells can measure the amplitude and phase of the stimulus.

Spatial-frequency and orientation tuning in psychophysical end-stopping

1998 ◽  
Vol 15 (4) ◽  
pp. 585-595 ◽  
Author(s):  
CONG YU ◽  
DENNIS M. LEVI
Keyword(s):  
Spatial Frequency ◽  
Frequency Tuning ◽  
Spatial Filter ◽  
Orientation Tuning ◽  
Maximal Strength ◽  
Facilitation Effect ◽  
Spatial Filters ◽  
Spatial Frequency Tuning ◽  
Spatial Frequencies ◽  
Wide Range

A psychophysical analog to cortical receptive-field end-stopping has been demonstrated previously in spatial filters tuned to a wide range of spatial frequencies (Yu & Levi, 1997a). The current study investigated tuning characteristics in psychophysical spatial filter end-stopping. When a D6 (the sixth derivative of a Gaussian) target is masked by a center mask (placed in the putative spatial filter center), two end-zone masks (placed in the filter end-zones) reduce thresholds. This “end-stopping” effect (the reduction of masking induced by end-zone masks) was measured at various spatial frequencies and orientations of end-zone masks. End-stopping reached its maximal strength when the spatial frequency and/or orientation of the end-zone masks matched the spatial frequency and/or orientation of the target and center mask, showing spatial-frequency tuning and orientation tuning. The bandwidths of spatial-frequency and orientation tuning functions decreased with increasing target spatial frequency. At larger orientation differences, however, end-zone masks induced a secondary facilitation effect, which was maximal when the spatial frequency of end-zone masks equated the target spatial frequency. This facilitation effect might be related to certain types of contour and texture perception, such as perceptual pop-out.

Sign in / Sign up

Export Citation Format

Share Document