scholarly journals Review of Dew Point Evaporative Cooling Technology for Air Conditioning Applications

2021 ◽  
Vol 11 (3) ◽  
pp. 934
Author(s):  
Anna Pacak ◽  
William Worek
Keyword(s):  
Porous Materials ◽  
Water Distribution ◽  
Evaporative Cooling ◽  
Electricity Consumption ◽  
Dew Point ◽  
Coefficient Of Performance ◽  
Cooling Systems ◽  
Climate Conditions ◽  
Current State ◽  
Indirect Evaporative Cooling

Indirect evaporative cooling has the potential to significantly improve the natural environment. It follows from a significant reduction in electricity consumption in the hot period, and hence lower operating costs for cooling systems. This paper presents the current state of knowledge and research directions on dew point indirect evaporative cooling. It was found that researchers focus on the development of dew point indirect evaporative coolers (DPIEC) by improving its design, geometry, water distribution, and new porous materials implementation. To evaluate the performance of new types of DPIEC, different methods are used by the scientists. Finally, optimized devices are studied in terms of their performance in different systems, like hybrid and desiccant systems, considering different climate conditions. Potential directions of development of evaporative technologies were indicated, such as increasing the coefficient of performance of solid desiccant evaporative cooling systems, developing novel geometry, and efficient water distribution, including development of porous materials.

scholarly journals An Overview of Different Indirect and Semi-Indirect Evaporative Cooling System for Study Potency of Nanopore Skinless Bamboo as An Evaporative Cooling New Porous Material

2020 ◽  
Vol 76 (3) ◽  
pp. 109-116
Author(s):  
Hendra Wijaksana ◽  
I. Nyoman Suprapta Winaya ◽  
Made Sucipta ◽  
Ainul Ghurri
Keyword(s):  
Energy Consumption ◽  
Porous Material ◽  
Cooling System ◽  
Evaporative Cooling ◽  
High Energy ◽  
Dew Point ◽  
Air Cooling ◽  
Cooling Systems ◽  
Evaporative Cooling System ◽  
Indirect Evaporative Cooling

The high energy consumption of compressor-based cooling system has prompted the researchers to study and develop non-compressor-based cooling system that less energy consumption, less environment damaging but still has high enough cooling performances. Indirect and semi indirect evaporative cooling system is the feasible non-compressor-based cooling systems that can reach the cooling performance required. These two evaporative cooling systems has some different in construction, porous material used, airflow scheme and secondary air-cooling method used for various applications. This paper would report the cooling performances achieved by those two-cooling systems in terms of cooling efficiency, cooling capacity, wet bulb effectiveness, dew point effectiveness, and temperature drop. Porous material used in indirect and semi-indirect evaporative cooling would be highlighted in terms of their type, size, thickness and any other feature. The introduction of nanopore skinless bamboo potency as a new porous material for either indirect or semi-indirect evaporative cooling would be described. In the future study of nanopore skinless bamboo, a surface morphology and several hygrothermal test including sorption, water vapor transmission, thermal conductivity test would be applied, before it utilizes as a new porous material for direct or semi indirect evaporative cooling.

scholarly journals Experiments on Energy-Efficient Evaporative Cooling Systems for Poultry Farm Application in Multan (Pakistan)

2021 ◽  
Vol 13 (5) ◽  
pp. 2836
Author(s):  
Khawar Shahzad ◽  
Muhammad Sultan ◽  
Muhammad Bilal ◽  
Hadeed Ashraf ◽  
Muhammad Farooq ◽  
...  
Keyword(s):  
Heat Stress ◽  
Low Cost ◽  
Evaporative Cooling ◽  
Thermal Exposure ◽  
Climatic Conditions ◽  
The Body ◽  
Dew Point ◽  
Sweat Glands ◽  
Cooling Systems ◽  
Humidity Index

Poultry are one of the most vulnerable species of its kind once the temperature-humidity nexus is explored. This is so because the broilers lack sweat glands as compared to humans and undergo panting process to mitigate their latent heat (moisture produced in the body) in the air. As a result, moisture production inside poultry house needs to be maintained to avoid any serious health and welfare complications. Several strategies such as compressor-based air-conditioning systems have been implemented worldwide to attenuate the heat stress in poultry, but these are not economical. Therefore, this study focuses on the development of low-cost and environmentally friendly improved evaporative cooling systems (DEC, IEC, MEC) from the viewpoint of heat stress in poultry houses. Thermodynamic analysis of these systems was carried out for the climatic conditions of Multan, Pakistan. The results appreciably controlled the environmental conditions which showed that for the months of April, May, and June, the decrease in temperature by direct evaporative cooling (DEC), indirect evaporative cooling (IEC), and Maisotsenko-Cycle evaporative cooling (MEC) systems is 7–10 °C, 5–6.5 °C, and 9.5–12 °C, respectively. In case of July, August, and September, the decrease in temperature by DEC, IEC, and MEC systems is 5.5–7 °C, 3.5–4.5 °C, and 7–7.5 °C, respectively. In addition, drop in temperature-humidity index (THI) values by DEC, IEC, and MEC is 3.5–9 °C, 3–7 °C, and 5.5–10 °C, respectively for all months. Optimum temperature and relative humidity conditions are determined for poultry birds and thereby, systems’ performance is thermodynamically evaluated for poultry farms from the viewpoint of THI, temperature-humidity-velocity index (THVI), and thermal exposure time (ET). From the analysis, it is concluded that MEC system performed relatively better than others due to its ability of dew-point cooling and achieved THI threshold limit with reasonable temperature and humidity indexes.

scholarly journals Performance Characteristics of Solid-Desiccant Evaporative Cooling Systems

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2574 ◽  
Author(s):  
Ramadas Narayanan ◽  
Edward Halawa ◽  
Sanjeev Jain
Keyword(s):  
Air Conditioning ◽  
Natural Ventilation ◽  
Waste Heat ◽  
Numerical Study ◽  
Evaporative Cooling ◽  
Peak Load ◽  
Dew Point ◽  
Low Grade ◽  
Subtropical Climate ◽  
Cooling Systems

Air conditioning accounts for up to 50% of energy use in buildings. Increased air-conditioning-system installations not only increase total energy consumption but also raise peak load demand. Desiccant evaporative cooling systems use low-grade thermal energy, such as solar energy and waste heat, instead of electricity to provide thermal comfort. This system can potentially lead to significant energy saving, reduction in carbon emissions, and it has a low dew-point operation and large capacity range. Their light weight, simplicity of design, and close-to-atmospheric operation make them easy to maintain. This paper evaluates the applicability of this technology to the climatic conditions of Brisbane, Queensland, Australia, specifically for the residential sector. Given the subtropical climate of Brisbane, where humidity levels are not excessively high during cooling periods, the numerical study shows that such a system can be a potential alternative to conventional compression-based air-conditioning systems. Nevertheless, the installation of such a system in Brisbane’s climate zone requires careful design, proper selection of components, and a cheap heat source for regeneration. The paper also discusses the economy-cycle options for this system in such a climate and compares its effectiveness to natural ventilation.

An Overview of Different Indirect and Semi-Indirect Evaporative Cooling System for Study Potency of Nanopore Skinless Bamboo as An Evaporative Cooling New Porous Material

2021 ◽  
Vol 79 (2) ◽  
pp. 123-130
Author(s):  
I Nyoman Suprapta Winaya ◽  
Hendra Wijaksana ◽  
Made Sucipta ◽  
Ainul Ghurri
Keyword(s):  
Energy Consumption ◽  
Porous Material ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Temperature Drop ◽  
High Energy ◽  
Dew Point ◽  
Air Cooling ◽  
Evaporative Cooling System ◽  
Indirect Evaporative Cooling

The high energy consumption of compressor based cooling system has prompted the researchers to study and develop non-compressor based cooling system that less energy consumption, less environment damaging but still has high enough cooling performances. Indirect and semi indirect evaporative cooling system is the feasible non-compressor based cooling systems that can reach the cooling performance required. This two evaporative cooling system has some different in construction, porous material used, airflow scheme and secondary air cooling method used for various applications. This paper would report the cooling performances achieved by those two cooling system in terms of cooling efficiency, cooling capacity, wet bulb effectiveness, dew point effectiveness, and temperature drop. Porous material used in indirect and semi-indirect evaporative cooling would be highlighted in terms of their type, size, thickness and any other feature. The introduction of nanopore skinless bamboo potency as a new porous material for either indirect or semi-indirect evaporative cooling would be described. In the future study of nanopore skinless bamboo, a surface morphology and several hygrothermal test including sorption, water vapor transmission, thermal conductivity test would be applied, before it utilize as a new porous material for direct or semi indirect evaporative cooling.

scholarly journals Indirect evaporative cooling systems: an experimental analysis in summer condition

2017 ◽  
Vol 140 ◽  
pp. 467-474 ◽  
Author(s):  
Stefano De Antonellis ◽  
Cesare Maria Joppolo ◽  
Calogero Leone ◽  
Paolo Liberati ◽  
Samanta Milani
Keyword(s):  
Experimental Analysis ◽  
Evaporative Cooling ◽  
Cooling Systems ◽  
Summer Condition ◽  
Indirect Evaporative Cooling

Systematic Assessment of Combustion Turbine Inlet Air-Cooling Techniques

2005 ◽  
Vol 127 (1) ◽  
pp. 159-169 ◽  
Author(s):  
Abdalla M. Al-Amiri ◽  
Montaser M. Zamzam
Keyword(s):  
Air Temperature ◽  
Evaporative Cooling ◽  
Heat Rate ◽  
Climatic Conditions ◽  
Coefficient Of Performance ◽  
Air Cooling ◽  
Cooling Systems ◽  
Turbine Inlet ◽  
Wide Range ◽  
The Impact

The current study is centered on assessing the benefits of incorporating combustion turbine inlet air-cooling systems into a reference combustion turbine plant, which is based on a simple cycle under base load mode. Actual climatic conditions of a selected site were examined thoroughly to identify the different governing weather patterns. The main performance characteristics of both refrigerative and evaporative cooling systems were explored by examining the effect of several parameters including inlet air temperature, airflow-to-turbine output ratio, coefficient of performance (for refrigerative cooling systems), and evaporative degree hours (for evaporative cooling systems). The impact of these parameters was presented against the annual gross energy increase, average heat rate reduction, cooling load requirements and net power increase. Finally, a feasibility design chart was constructed to outline the economic returns of employing a refrigerative cooling unit against different prescribed inlet air temperature values using a wide range of combustion turbine mass flow rates.

scholarly journals Numerical Investigation of a Novel Plate-Fin Indirect Evaporative Cooling System Considering Condensation

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 332
Author(s):  
Yuanyuan Zhou ◽  
Zhen Yan ◽  
Ming Gao ◽  
Qiumin Dai ◽  
Yanshun Yu
Keyword(s):  
Heat Transfer ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Operating Conditions ◽  
Dew Point ◽  
Inlet Temperature ◽  
Thermoelectric Cooling ◽  
Evaporative Cooling System ◽  
Evaporative Cooler ◽  
Indirect Evaporative Cooling

An indirect evaporative cooling system combining with thermoelectric cooling technology (i.e., TIEC system) is proposed, in which a counter-flow plate-fin indirect evaporative cooler is inserted with thermoelectric cooling (i.e., TEC) modules. In hot and humid climate, condensation may occur on the dry channel surface of the cooler. For the TIEC system, with the aid of TEC technology, the surface temperature of the dry channel can be much lower than that of a traditional indirect evaporative cooler, thus, the condensation from the primary air is more likely to take place. A numerical model of this novel TIEC system is developed with specifically taking condensation from primary air into account. Detailed performance analysis of the TIEC system is carried out. Analytical results found that the condensation from primary air reduces the dew point effectiveness by up to 45.0% by weakening the sensible heat transfer but increases the coefficient of performance by up to 62.2% by increasing the latent heat transfer, under given conditions. The effects of main operating conditions, such as the electrical current I and number n of TEC modules, inlet temperature Tp,i, humidity ratio RHp and velocity Vp of the primary air, and the mass flow rate ratio x of secondary to primary air, are investigated under non-condensation and condensation states. It is shown that condensate is more easily produced under higher I, n, Tp,i, RHp, x and lower Vp.

Annual thermal performance assessment of a regenerative evaporative cooling system under different climate conditions in Mexico

2021 ◽  
pp. 1420326X2110457
Author(s):  
Enrique Mitz-Hernandez ◽  
Miguel Gijón-Rivera ◽  
Carlos I. Rivera-Solorio
Keyword(s):  
Thermal Performance ◽  
Atmospheric Pressure ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Channel Length ◽  
Dew Point ◽  
Transfer Model ◽  
Climate Conditions ◽  
Wide Range ◽  
Evaporative Cooling System

A numerical heat and mass transfer model with thermophysical properties dependent on the temperature, humidity ratio and atmospheric pressure was developed. The numerical model was verified and validated against literature, and it showed good agreements. The pseudo-transient model provides a low-cost computational tool to evaluate the potential and performance of a dew point evaporative cooling system for a wide range of extreme climate conditions (BWh, BSh, Cw and Aw from Köppen classification). A parametric analysis of different operational and design conditions in the evaporative cooler was conducted. Results show that there is an optimal channel length for given climatic conditions. The Dew-point evaporative cooling (DPEC) system showed that the best thermal performance corresponds to the climate very arid (Hermosillo – BWh) with 4018 comfort hours (83.1%) followed by the climate arid (Monterrey – BSh) with 3470 comfort hours (90.9%), the mild climate (Puebla – Cw) with 295 comfort hours (100%) and the warm climate (Cancun – Aw) with 3452 comfort hours (62.3%). Finally, an engineering correlation for constant atmospheric pressure and channel length was obtained ([Formula: see text] of 93%).

Sign in / Sign up

Export Citation Format

Share Document