scholarly journals Mechanized Grape Harvest Efficiency

2021 ◽  
Vol 11 (10) ◽  
pp. 4621
Author(s):  
Ján Jobbágy ◽  
Martin Dočkalík ◽  
Koloman Krištof ◽  
Patrik Burg
Keyword(s):  
Weather Conditions ◽  
Hourly Wage ◽  
Purchase Price ◽  
Statistical Software ◽  
Technical Parameters ◽  
Harvest Efficiency ◽  
The Difference ◽  
The Cost ◽  
Selective Process ◽  
Growing Region

Due to the low number of employees and the time limit in the field of grape harvesting, we focused in the presented article on evaluating the effectiveness of the deployment of an outboard grape harvester within the conditions of Slovak viticulture. The vineyards are in the Nitra wine-growing region on the southwestern slopes behind the Pivnica Radošina company, Piešťany district, in a total area of 33 ha. The object of the research was a PELLENC 8090 Selective Process trailed grape harvester aggregated with a SAME Frutteto3 100 tractor. The mechanized harvesting was tested in the vineyards of Pivnica Radošina s. r. on three selected varieties (Pinot Gris, Pinot Blanc, and Tramin Red) for two years. Entry conditions, technical parameters of the equipment, and weather conditions were monitored for all varieties. Data were analyzed with STATISTICA statistical software. As part of the research, post-harvest losses due to mechanized harvesting were monitored. The average losses for all examined varieties reached the value of 2.17% in 2018, and the value of 2.25% in 2017. A significant output was the efficiency of the deployment of the set for mechanized grape harvesting, where in 2018 a minimum value of 146.3 ha was set (the average cost of grapes was 500 Euro.t−1). A significant part of the cost was fixed items, as a two-year tractor and a trailed collector (for 2017) were used for mechanized harvesting. The difference compared to previous research was the deployment of a completely new set during a two-year period on varieties that have not yet been evaluated. The economic efficiency over two years was elaborated in detail, which highlighted the benefits of multi-annual use. In terms of examining losses, differences were shown not only between varieties, but also between years, and these data were statistically verified. The paper evaluates the dependence of the use of mechanized harvesting on changes in the purchase price of grapes (increasing it also exponentially increases the required area) and on changing the hourly wage of an employee (increasing it degressively reduces the required area). From the results it can be said that statistically and economically significant outputs were achieved for the deployment of machine collection.

scholarly journals SPECIFICS OF ATTAINING THE QUALIFICATION OF A PILOT IN CANADA

2020 ◽  
pp. 93-101
Author(s):  
Tetiana Fursenko ◽  
Keyword(s):  
New Technologies ◽  
Weather Conditions ◽  
Flight Training ◽  
Civil Aviation ◽  
Aviation Industry ◽  
Pilot Training ◽  
Scientific Methods ◽  
College Programs ◽  
The Difference ◽  
The Cost

The aim of the paper is to give an overview of the qualification requirements for future pilots in Canada and to discuss trends in such professionals training modernization. The methodological framework of the research is comprised of general scientific methods (analysis, synthesis, comparison, generalization – to study the works of foreign scientists, official and legal documents); specific-scientific methods (categorial analysis – to reveal the essence and clarify the definitions of the basic concepts of the study), and the structural and functional analysis – to determine the organizational, content and procedural features of pilot training in Canada. The analysis of the normative and legislative documents showed that the most professionally important licenses giving a pilot a professional right to work in the aviation industry and civil aviation are the Commercial Pilot’s License – CPL and the Airline Transport Pilot’s License – ATPL. The paper concentrates on the analysis of the requirements for knowledge and skills that a pilot has to possess and develop as well as a number of important steps to be completed to get the CPL and ATPL as specified in the corresponding sections of the Canadian Aviation Regulations. In order to obtain a license, a future pilot has to comply with the requirements for age, health status, a number of written examinations and flight training – flight hours, flight conditions and the level of skills. The qualification of a pilot can be attained at Flight Training Units or following the completion of university and college programs. The paper describes the specifics of integrated courses offered by the former – the Commercial Pilot Licence – Aeroplane (CPL(A)) integrated course, Commercial Pilot Licence – Aeroplane/Instrument Rating (CPL(A)/IR) Integrated Course, and Airline Transport Pilot Licence – ATP(A) Integrated Course. The conclusion is made that the types of flights and pilot activities in terms of CPL (A), CPL (A) / IR and ATP (A) licenses are largely the same. The difference lies in the number of hours provided for certain activity types and several specific requirements such as flying in difficult weather conditions or interaction between crew members. Among pilots’ training modernization trends we single out the following: its organization based on the competence approach, a reduction in the cost of training a new generation of pilots and increasing its efficiency through the introduction of new technologies in the training process.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

Costs and the cost-effectiveness threshold

2017 ◽  
Author(s):  
Jan Abel Olsen
Keyword(s):  
Societal Perspective ◽  
Threshold Value ◽  
Quality Adjusted Life Year ◽  
Healthcare Sector ◽  
The Difference ◽  
The Cost ◽  
Qaly Threshold ◽  
Cost Effectiveness Threshold ◽  
Effectiveness Threshold ◽  
Quality Adjusted Life

Chapter 19 starts by distinguishing between the two contrasting perspectives that an economic evaluation would take: the healthcare sector perspective versus the societal perspective. The former is considered a ‘narrow analysis’ which includes only the costs accruing within the healthcare sector, while the latter represents a ‘broad analysis’ that accounts for all resource implications in all sectors of the economy. After an investigation into various types of costs, a ‘limited societal perspective’ is suggested to be more appropriate than either of the two ‘extreme perspectives’. The chapter continues with a discussion of the cost per quality-adjusted life year (QALY) threshold and explains the difference between a demand side- versus a supply-side approach to determining a threshold value for a QALY.

The Direct and Indirect Costs of Treating the Victims of the 2016 Nice Terror Attacks in a Single Pediatric Hospital

2021 ◽  
pp. 1-4
Author(s):  
Federico Solla ◽  
Eytan Ellenberg ◽  
Virginie Rampal ◽  
Julien Margaine ◽  
Charles Musoff ◽  
...  
Keyword(s):  
Indirect Costs ◽  
Medical Costs ◽  
Pediatric Hospital ◽  
Terror Attack ◽  
Direct And Indirect Costs ◽  
Terror Attacks ◽  
Direct Medical Costs ◽  
Annual Budget ◽  
The Difference ◽  
The Cost

Abstract Objective: To analyze the cost of the terror attack in Nice in a single pediatric institution. Methods: We carried out descriptive analyses of the data coming from the Lenval University Children’s Hospital of Nice database after the July 14, 2016 terror attack. The medical cost for each patient was estimated from the invoice that the hospital sent to public insurance. The indirect costs were calculated from the hospital’s accounting, as the items that were previously absent or the difference between costs in 2016 versus the previous year. Results: The costs total 1.56 million USD, corresponding to 2% of Lenval Hospital’s 2016 annual budget. Direct medical costs represented 9% of the total cost. The indirect costs were related to human resources (overtime, sick leave), revenue shortfall, and security and psychiatric reinforcement. Conclusion: Indirect costs had a greater impact than did direct medical costs. Examining the level and variety of direct and indirect costs will lead to a better understanding of the consequences of terror acts and to improved preparation for future attacks.

Erbium/Ytterbium-Doped Waveguide Amplifier (EYDWA) for extended reach of Wavelength Division Multiplexing based free space optics system (WDM/FSO)

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Bentahar Attaouia ◽  
Kandouci Malika ◽  
Ghouali Samir
Keyword(s):  
Wavelength Division Multiplexing ◽  
Free Space ◽  
Cost Effective ◽  
Weather Conditions ◽  
Free Space Optical ◽  
Wavelength Division ◽  
Space Optics ◽  
Effective Implementation ◽  
Transmission Distance ◽  
The Cost

AbstractThis work is focused to carry out the investigation of wavelength division multiplexing (WDM) approach on free space optical (FSO) transmission systems using Erbium Ytterbium Doped Waveguide Amplifier (EYDWA) integrated as post-or pre-amplifier for extending the reach to 30 Km for the cost-effective implementation of FSO system considering weather conditions. Furthermore, the performance of proposed FSO-wavelength division multiplexing (WDM) system is also evaluated on the effect of varying the FSO range and results are reported in terms of Q factor, BER, and eye diagrams. It has been found that, under clear rain the post-amplification was performed and was able to reach transmission distance over 27 Km, whereas, the FSO distance has been limited at 19.5 Km by using pre-amplification.

scholarly journals Why Do Some Firms Spend So Much on Medical Care? Accounting for Variation

2000 ◽  
Vol 3 (1) ◽  
Author(s):  
Matthew Eichner ◽  
Mark McClellan ◽  
David A. Wise
Keyword(s):  
Health Care ◽  
Health Care Cost ◽  
Health Care Expenditures ◽  
Cost Of Treatment ◽  
Consistent Method ◽  
The Difference ◽  
The Cost ◽  
Cost Differences ◽  
Average Expenditure

We are engaged in a long-term project to analyze the determinants of health care cost differences across firms. An important first step is to summarize the nature of expenditure differences across plans. The goal of this article is to develop methods for identifying and quantifying those factors that account for the wide differences in health care expenditures observed across plans.We consider eight plans that vary in average expenditure for individuals filing claims, from a low of $1,645 to a high of $2,484. We present a statistically consistent method for decomposing the cost differences across plans into component parts based on demographic characteristics of plan participants, the mix of diagnoses for which participants are treated, and the cost of treatment for particular diagnoses. The goal is to quantify the contribution of each of these components to the difference between average cost and the cost in a given firm. The demographic mix of plan enrollees accounts for wide differnces in cost ($649). Perhaps the most noticeable feature of the results is that, after adjusting for demographic mix, the difference in expenditures accounted for by the treatment costs given diagnosis ($807) is almost as wide as the unadjusted range in expenditures ($838). Differences in cost due to the different illnesses that are treated, after adjusting for demographic mix, also accounts for large differences in cost ($626). These components of cost do not move together; for example, demographic mix may decrease expenditure under a particular plan while the diagnosis mix may increase costs.Our hope is that understanding the reasons for cost differences across plans will direct more focused attention to controlling costs. Indeed, this work is intended as an important first step toward that goal.

scholarly journals The Effect of Massachusetts' Health Reform on Employer-Sponsored Insurance Premiums

2010 ◽  
Vol 13 (2) ◽  
Author(s):  
John F Cogan ◽  
R. Glenn Hubbard ◽  
Daniel Kessler
Keyword(s):  
United States ◽  
Health Reform ◽  
Medical Expenditure Panel Survey ◽  
Private Insurance ◽  
The United States ◽  
Medical Expenditure ◽  
Insurance Premiums ◽  
Reform Plan ◽  
The Difference ◽  
The Cost

In this paper, we use publicly available data from the Medical Expenditure Panel Survey - Insurance Component (MEPS-IC) to investigate the effect of Massachusetts' health reform plan on employer-sponsored insurance premiums. We tabulate premium growth for private-sector employers in Massachusetts and the United States as a whole for 2004 - 2008. We estimate the effect of the plan as the difference in premium growth between Massachusetts and the United States between 2006 and 2008—that is, before versus after the plan—over and above the difference in premium growth for 2004 to 2006. We find that health reform in Massachusetts increased single-coverage employer-sponsored insurance premiums by about 6 percent, or $262. Although our research design has important limitations, it does suggest that policy makers should be concerned about the consequences of health reform for the cost of private insurance.

Efficient Solar Desalination System Using Humidification/Dehumidification Process

2014 ◽  
Vol 136 (4) ◽  
Author(s):  
Adel M. Abdel Dayem
Keyword(s):  
High Pressure ◽  
Heat Source ◽  
System Performance ◽  
Salt Water ◽  
Weather Conditions ◽  
Water Production ◽  
High Pressure Pump ◽  
Solar Desalination ◽  
Flat Plate Collector ◽  
The Cost

An innovative solar desalination system is successfully designed, manufactured, and experimentally tested at Makkah, 21.4 degN. The system consists of 1.15 m2 flat-plate collector as a heat source and a desalination unit. The unit is about 400 l vertical cylindrical insulated tank. It includes storage, evaporator, and condenser of hot salt-water that is fed from the collector. The heated water in the collector is raised naturally to the unit bottom at which it is used as storage. A high pressure pump is used to inject the water vertically up through 1-mm three nozzles inside the unit. The hot salt-water is atomized inside the unit where the produced vapor is condensed on the inner surfaces of the unit outer walls to outside. The system was experimentally tested under different weather conditions. It is obtained that the system can produce about 9 l a day per quadratic meter of collector surface area. By that it can produce about 1.6 l/kWh of solar energy. Moreover, the water temperature has a great effect on the system performance although the scaling possibility is becoming significant. By that way the cost of a liter water production is relatively high and is obtained as 0.5 US$.

United Front: Partisans of the Leningrad Region and their connections with the Central Asian Soviet Republics

2021 ◽  
Vol 2021 (02) ◽  
pp. 214-225
Author(s):  
Sergey Kulik ◽  
Аnatoliy Kashevarov ◽  
Zamira Ishankhodjaeva
Keyword(s):  
World War Ii ◽  
Weather Conditions ◽  
Leningrad Region ◽  
World War ◽  
North West ◽  
The North ◽  
Occupied Territory ◽  
Central Asian ◽  
The Difference ◽  
Almost All

During World War II, representatives of almost all the Soviet Republics fought in partisan detachments in the occupied territory of the Leningrad Region. Among them were many representatives of the Central Asian republics: Kazakhstan, Kyrgyzstan and Uzbekistan. Many Leningrad citizens, including relatives of partisans, had been evacuated to Central Asia by that time. However, representatives of Asian workers’ collectives came to meet with the partisans. The huge distance, the difference in cultures and even completely different weather conditions did not become an obstacle to those patriots-Turkestanis who joined the resistance forces in the North-West of Russia.

THE TECHNICAL CONDITION OF THE SURVEYED HYDRAULIC UNITS IN THE MOSCOW REGION AND THE CLASSIFICATION FEATURES OF THEIR RESERVOIRS

2021 ◽  
pp. 69-79
Author(s):  
V. V. GRITSAN ◽  
Keyword(s):  
Technical Condition ◽  
Moscow Region ◽  
Risk Level ◽  
Ecological Framework ◽  
Safety Level ◽  
Repair Work ◽  
Hydraulic Unit ◽  
Technical Parameters ◽  
Characteristic Features ◽  
The Cost

The article presents the results of surveys of 311 class IV hydraulic structures carried out in 2016-2020 in the Moscow region. All the reservoirs of the surveyed hydraulic units were classified according to their characteristic features, the technical condition of culverts and dams was assessed, there was established the safety level of both separate structures and hydraulic units as a whole. During the surveys, the technical parameters of the surveyed structures were established, the state of each structure and the hydraulic unit as a whole was assessed, a possibility of their accident and a risk level for the downstream areas were considered. At the same time, recommendations were developed for the elimination of serious damage and, with the help of an examination, the amount of the cost of the necessary repair work was determined. The paper also assesses the issues of the ecological state of the areas where the hydraulic units are located and the hydraulic units themselves as blocks of the ecological framework of the territories.

Sign in / Sign up

Export Citation Format

Share Document