scholarly journals Numerical Integration-Based Performance Analysis of Cross-Eye Jamming Algorithm

2021 ◽  
Vol 11 (24) ◽  
pp. 11612
Author(s):  
Je-An Kim ◽  
Joon-Ho Lee

In this paper, performance analysis of the cross-eye jamming effect under mechanical defects is dealt with. By using a numerical analysis-based approach, the performance analysis method proposed in this paper is closer to the not approximated empirical mean square difference (MSD) than the first-order Taylor approximation-based performance analysis method and the second-order Taylor approximation-based performance analysis method proposed in previous studies. In other words, the effects of amplitude ratio perturbation and phase difference perturbation on performance degradation are quantitatively analyzed. Note that the numerical integration is adopted to derive an analytic expression of the MSD.

Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5027
Author(s):  
Je-An Kim ◽  
Joon-Ho Lee

Cross-eye gain in cross-eye jamming systems is highly dependent on amplitude ratio and the phase difference between jammer antennas. It is well known that cross-eye jamming is most effective for the amplitude ratio of unity and phase difference of 180 degrees. It is assumed that the instabilities in the amplitude ratio and phase difference can be modeled as zero-mean Gaussian random variables. In this paper, we not only quantitatively analyze the effect of amplitude ratio instability and phase difference instability on performance degradation in terms of reduction in cross-eye gain but also proceed with analytical performance analysis based on the first order and second-order Taylor expansion.


2020 ◽  
Vol 2020 ◽  
pp. 1-24
Author(s):  
Eun-Kyung Lee ◽  
Joon-Ho Lee

The performance of the conventional beamforming for angle-of-arrival (AOA) estimation algorithm under measurement uncertainty is analyzed. Gaussian random variables are used for modeling measurement noises. Analytic expression of the mean square error (MSE) is obtained via Taylor series expansion. In traditional performance analysis, estimation accuracy in terms of the MSEs is usually obtained from the Monte Carlo simulation, which is computationally intensive especially for large number of repetitions in the Monte Carlo simulation. For reliable MSE in the Monte Carlo simulation, the number of repetitions should be very large. To circumvent this problem, analytic performance analysis which is less computationally intensive than the Monte Carlo simulation-based performance analysis is proposed in this paper. After some approximations, we derive the closed form expression of the mean square error (MSE) for each incident signal. The validity of the derived expressions is shown by comparing an analytic MSE with an empirical MSEs. The Cramer–Rao bound is also used to further validate the derived analytic expression.


2018 ◽  
Vol 2 (01) ◽  
pp. 14
Author(s):  
Eddy Supardi

The Tax Payer obidience in fulfiling their taxation obligation will be influenced a lot by the satisfaction level toward the service fiscus. The aim of this observation is to know the response of Tax Payer toward service quality through importance and performance. The population which become the object of this observation is the personal Tax Payer registered in Bogor Tax Service Office and the number of respondents taken as the sample are 100 respondents with Slovin formula. The analysis method used is descriptive analysis and importance-performance analysis.   The result of this observation will be able to be used as one of the input to Bogor Tax Service Office in improving the quality service and for the following observation, especially those who take the same object as the observation in order to improve the quality service to the Tax Payer based on the service of its working way which is felt less. Otherwise it is important for The Tax Payer, maintaining the good work or balancing the service quality based on the working way which is evaluated less important by The Taxe Payer, but has been done reasonably well or very well by The Service Office


Author(s):  
Nguyen Cao Thang ◽  
Luu Xuan Hung

The paper presents a performance analysis of global-local mean square error criterion of stochastic linearization for some nonlinear oscillators. This criterion of stochastic linearization for nonlinear oscillators bases on dual conception to the local mean square error criterion (LOMSEC). The algorithm is generally built to multi degree of freedom (MDOF) nonlinear oscillators. Then, the performance analysis is carried out for two applications which comprise a rolling ship oscillation and two degree of freedom one. The improvement on accuracy of the proposed criterion has been shown in comparison with the conventional Gaussian equivalent linearization (GEL).


Author(s):  
Frendly Matulessy ◽  
Dionisius Bawole

This study aims to measure the performance of fish auction process in Arumbai Market in Ambon. Primary data were collected from 43 respondents through observation and direct interview based on questionnaire. Data was analysed by qualitative descriptive method, importance performance analysis method (IPA) and gap analysis, and value for money method. The results show that: 1). There are three auction process activities namely pre auction, auction, and post auction; 2). Fisherman's satisfaction level is 67% and merchant satisfaction is 81%; and 3). The auction performance of the economic aspect is less economical, with the final value of 83%, while the fish auction performance from the efficiency aspect is less efficient with the value of 76%. For that, it needs additional officers to manage fish auction place (TPI) in Arumbai Market. In addition, the fish auction facilities (TPI) in Arumbai Market needs to be improved.


Author(s):  
Tsu-Wang Shen ◽  
Shan-Chun Chang

Abstract Purpose Although electrocardiogram (ECG) has been proven as a biometric for human identification, applying biometric technology remains challenging with diverse heart rate circumstances in which high intensity heart rate caused waveform deformation may not be known in advance when ECG templates are registered. Methods A calibration method that calculates the ratio of the length of an unidentified electrocardiogram signal to the length of an electrocardiogram template is proposed in this paper. Next, the R peak is used as an axis anchor point of a trigonometric projection (TP) to attain the displacement value. Finally, the unidentified ECG signal is calibrated according to the generated trigonometric value, which corresponds to the trigonometric projection degree of the ratio and the attained displacement measurement. Results The results reveal that the proposed method provides superior overall performance compared with that of the conventional downsampling method, based on the percentage root mean square difference (PRD), correlation coefficients, and mean square error (MSE). Conclusion The curve fitting equation directly maps from the heart rate levels to the TP degree without prior registration information. The proposed ECG calibration method offers a more robust system against heart rate interference when conducting ECG identification.


1995 ◽  
Vol 74 (6) ◽  
pp. 2665-2684 ◽  
Author(s):  
Y. Kondoh ◽  
Y. Hasegawa ◽  
J. Okuma ◽  
F. Takahashi

1. A computational model accounting for motion detection in the fly was examined by comparing responses in motion-sensitive horizontal system (HS) and centrifugal horizontal (CH) cells in the fly's lobula plate with a computer simulation implemented on a motion detector of the correlation type, the Reichardt detector. First-order (linear) and second-order (quadratic nonlinear) Wiener kernels from intracellularly recorded responses to moving patterns were computed by cross correlating with the time-dependent position of the stimulus, and were used to characterize response to motion in those cells. 2. When the fly was stimulated with moving vertical stripes with a spatial wavelength of 5-40 degrees, the HS and CH cells showed basically a biphasic first-order kernel, having an initial depolarization that was followed by hyperpolarization. The linear model matched well with the actual response, with a mean square error of 27% at best, indicating that the linear component comprises a major part of responses in these cells. The second-order nonlinearity was insignificant. When stimulated at a spatial wavelength of 2.5 degrees, the first-order kernel showed a significant decrease in amplitude, and was initially hyperpolarized; the second-order kernel was, on the other hand, well defined, having two hyperpolarizing valleys on the diagonal with two off-diagonal peaks. 3. The blockage of inhibitory interactions in the visual system by application of 10-4 M picrotoxin, however, evoked a nonlinear response that could be decomposed into the sum of the first-order (linear) and second-order (quadratic nonlinear) terms with a mean square error of 30-50%. The first-order term, comprising 10-20% of the picrotoxin-evoked response, is characterized by a differentiating first-order kernel. It thus codes the velocity of motion. The second-order term, comprising 30-40% of the response, is defined by a second-order kernel with two depolarizing peaks on the diagonal and two off-diagonal hyperpolarizing valleys, suggesting that the nonlinear component represents the power of motion. 4. Responses in the Reichardt detector, consisting of two mirror-image subunits with spatiotemporal low-pass filters followed by a multiplication stage, were computer simulated and then analyzed by the Wiener kernel method. The simulated responses were linearly related to the pattern velocity (with a mean square error of 13% for the linear model) and matched well with the observed responses in the HS and CH cells. After the multiplication stage, the linear component comprised 15-25% and the quadratic nonlinear component comprised 60-70% of the simulated response, which was similar to the picrotoxin-induced response in the HS cells. The quadratic nonlinear components were balanced between the right and left sides, and could be eliminated completely by their contralateral counterpart via a subtraction process. On the other hand, the linear component on one side was the mirror image of that on the other side, as expected from the kernel configurations. 5. These results suggest that responses to motion in the HS and CH cells depend on the multiplication process in which both the velocity and power components of motion are computed, and that a putative subtraction process selectively eliminates the nonlinear components but amplifies the linear component. The nonlinear component is directionally insensitive because of its quadratic non-linearity. Therefore the subtraction process allows the subsequent cells integrating motion (such as the HS cells) to tune the direction of motion more sharply.


Wind Energy ◽  
2013 ◽  
Vol 17 (11) ◽  
pp. 1727-1736 ◽  
Author(s):  
Ali Al-Abadi ◽  
Özgür Ertunç ◽  
Horst Weber ◽  
Antonio Delgado

2011 ◽  
Vol 2011 ◽  
pp. 1-14 ◽  
Author(s):  
Victor A. Sipachev

Structural studies are largely performed without taking into account vibrational effects or with incorrectly taking them into account. The paper presents a first-order perturbation theory analysis of the problem. It is shown that vibrational effects introduce errors on the order of 0.02 Å or larger (sometimes, up to 0.1-0.2 Å) into the results of diffraction measurements. Methods for calculating the mean rotational constants, mean-square vibrational amplitudes, vibrational corrections to internuclear distances, and asymmetry parameters are described. Problems related to low-frequency motions, including torsional motions that transform into free rotation at low excitation levels, are discussed. The algorithms described are implemented in the program available from the author (free).


Sign in / Sign up

Export Citation Format

Share Document