scholarly journals Investigation of the Lightning Impulse Breakdown Voltage of Mineral Oil based Fe3O4 Nanofluids

Coatings ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 799 ◽  
Author(s):  
Víctor A. Primo ◽  
Belén García ◽  
Juan Carlos Burgos ◽  
Daniel Pérez-Rosa
Keyword(s):  
Dielectric Properties ◽  
Breakdown Voltage ◽  
Mineral Oil ◽  
Power Transformers ◽  
Experimental Conditions ◽  
Insulating Materials ◽  
Recent Interest ◽  
Insulating Liquids ◽  
Lightning Impulse ◽  
Transformer Design

The recent interest in the development of nanomaterials has led researchers to the study of their electrical properties and the applications that they may have as insulating materials. One of these applications is the use of nanofluids as electrical insulation of power transformers. It has been reported that the dielectric properties of insulating liquids in which small amounts of nanoparticles have been dispersed are, in some cases, superior to those of the base fluids. Although these materials are promising, and their application could lead to advantages for the transformer design and reliability in the future, more research is necessary to evaluate different combination of materials under a wider range of experimental conditions. In this paper, a research on the lightning impulse breakdown voltage of mineral oil and several Fe3O4-based nanofluids is presented. Fluids prepared with different concentrations of nanoparticles were subjected to impulse lightning voltages considering both positive and negative polarities. As shown in this work the positive impulse breakdown voltage of the liquids showed improvements of up to 50%; in the case of the negative impulses not significant improvements were obtained.

scholarly journals Lightning Impulse Withstand of Natural Ester Liquid

Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1964 ◽  
Author(s):  
Stephanie Haegele ◽  
Farzaneh Vahidi ◽  
Stefan Tenbohlen ◽  
Kevin Rapp ◽  
Alan Sbravati
Keyword(s):  
Breakdown Voltage ◽  
Dielectric Strength ◽  
Mineral Oil ◽  
Homogeneous Field ◽  
Inhomogeneous Field ◽  
Insulating Liquids ◽  
Lightning Impulse ◽  
Insulating Liquid ◽  
Natural Ester ◽  
Inhomogeneity Factor

Due to the low biodegradability of mineral oil, intense research is conducted to define alternative liquids with comparable dielectric properties. Natural ester liquids are an alternative in focus; they are used increasingly as insulating liquid in distribution and power transformers. The main advantages of natural ester liquids compared to mineral oil are their good biodegradability and mainly high flash and fire points providing better fire safety. The dielectric strength of natural ester liquids is comparable to conventional mineral oil for homogeneous field arrangements. However, many studies showed a reduced dielectric strength for highly inhomogeneous field arrangements. This study investigates at which degree of inhomogeneity differences in breakdown voltage between the two insulating liquids occur. Investigations use lightning impulses with different electrode arrangements representing different field inhomogeneity factors and different gap distances. To ensure comparisons with existing transformer geometries, investigations are application-oriented using a transformer conductor model, which is compared to other studies. Results show significant differences in breakdown voltage from an inhomogeneity factor of 0.1 (highly inhomogeneous field) depending on the gap distance. Larger electrode gaps provide a larger inhomogeneity at which differences in breakdown voltages occur.

Electrophysical properties of mixtures of mineral oil and synthetic ester dielectric liquid

2021 ◽  
Vol 14 (2) ◽  
pp. 132-141
Author(s):  
M. N. Lyutikova ◽  
S. M. Korobeynikov ◽  
A. A. Konovalov
Keyword(s):  
Dielectric Loss ◽  
Breakdown Voltage ◽  
Loss Tangent ◽  
Dielectric Loss Tangent ◽  
Kinematic Viscosity ◽  
Mineral Oil ◽  
Flash Point ◽  
Power Transformers ◽  
Synthetic Ester ◽  
Insulating Properties

Power transformers are key equipment in power generation, transmission, and distribution systems. The reliability of power transformers is based on the performance of the insulation system, which includes solid cellulose insulation and a liquid dielectric. Modern power engineering requires liquid insulation to have excellent insulating properties, high fire resistance, and biodegradability. Mineral oil that has been in use for over 100 years does not meet certain requirements. Therefore, various methods of enhancing the insulating properties of the oil are currently being considered, including mixing it with other liquid dielectrics, which have excellent properties. Synthetic and natural esters are considered as alternative fluids.This article discusses the possibility of enhancing the insulating characteristics of mineral oil with a high content of aromatic hydrocarbons (for example, T-750 oil) by mixing it with synthetic ester Midel 7131. Assessment is given of insulating parameters of the resulting mixtures with an ester fraction in mineral oil from 0% to fifty%. The main characteristics of the mixtures are described, such as density, kinematic viscosity, flash point, dielectric loss tangent, relative dielectric permittivity, breakdown voltage, and moisture content. It is shown that with an increase in the proportion of ester, some parameters of the obtained insulating liquid improve (flash point, dielectric constant, breakdown voltage), while values of other parameters (density, kinematic viscosity, dielectric loss tangent) with an ester content of more than 10% in the mixture do not meet the requirements for mineral oils.

scholarly journals The Impact of TiO2 Nanoparticle Concentration Levels on Impulse Breakdown Performance of Mineral Oil-Based Nanofluids

Nanomaterials ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 627 ◽  
Author(s):  
Ziyi Wang ◽  
You Zhou ◽  
Wu Lu ◽  
Neng Peng ◽  
Weijie Chen
Keyword(s):  
Tio2 Nanoparticles ◽  
Electric Fields ◽  
Breakdown Voltage ◽  
Concentration Level ◽  
Breakdown Strength ◽  
Mineral Oil ◽  
Interfacial Region ◽  
Bulk Oil ◽  
Lightning Impulse ◽  
The Impact

The insulation of mineral oil-based nanofluids was found to vary with different concentration level of nanoparticles. However, the mechanisms behind this research finding are not well studied. In this paper, mineral oil-based nanofluids were prepared by suspending TiO2 nanoparticles with weight percentages ranging from 0.0057% to 0.0681%. The breakdown voltage and chop time of nanofluids were observed under standard lightning impulse waveform. The experimental results show that the presence of TiO2 nanoparticles increases the breakdown voltage of mineral oil under positive polarity. The enhancement of breakdown strength tends to saturate when the concentration of nanoparticle exceeds 0.0227 wt%. Electronic traps formed at the interfacial region of nanoparticles, which could capture fast electrons in bulk oil and reduce the net density of space charge in front of prebreakdown streamers, are responsible for the breakdown strength enhancement. When the particle concentration level is higher, the overlap of Gouy–Chapman diffusion layers results in the saturation of trap density in nanofluids. Consequently, the breakdown strength of nanofluids is saturated. Under negative polarity, the electrons are likely to be scattered by the nanoparticles on the way towards the anode, resulting in enhanced electric fields near the streamer tip and the decrement of breakdown voltage.

scholarly journals Behavior of Biodegradable Oil under Impulse Voltages

2015 ◽  
Vol 785 ◽  
pp. 320-324 ◽  
Author(s):  
Nurul Izzatul Akma Katim ◽  
Mohd Taufiq Ishak ◽  
A.M. Ishak ◽  
M.Z.A.A. Kadir
Keyword(s):  
Breakdown Voltage ◽  
Palm Oil ◽  
Coconut Oil ◽  
Mineral Oil ◽  
Electrical Performance ◽  
Uniform Field ◽  
Testing Methods ◽  
Environmental Compatibility ◽  
Impulse Voltage ◽  
Lightning Impulse

The properties of Palm Oil (PO) and Coconut Oil (CO) offer the potential for transformers with non-toxicity, high fire and flash points and better environmental compatibility while compared with those filled with Mineral Oil (MO). This potential has led to intensive studies of electrical performance of biodegradable oil especially in evaluating the electrical performance under lightning impulse voltage in recent years. This paper presents the investigation on the impulse breakdown voltage of PO and CO in such a uniform field. The PO used in this study is Refined, Bleached and Deodorized Palm Oil (RBDPO) Olein type. Two testing methods, rising-voltage and up-and-down are considered for both oils with different gap distances (2.0 mm and 3.8 mm). Testing methods including rising-voltage method and up-and-down method have no notable influence on the breakdown voltages of RBDPOs and CO compared to MO.

Electrical Breakdown Voltage of Palm Oil and Nano Graphene Filler in Nanofluids Application on Transformer Insulating Oil

2021 ◽  
Vol 902 ◽  
pp. 59-63
Author(s):  
Kanin Wajanasoonthon ◽  
Amnart Suksri
Keyword(s):  
Breakdown Voltage ◽  
Palm Oil ◽  
Electrical Breakdown ◽  
High Viscosity ◽  
Mineral Oil ◽  
Power Transformers ◽  
Environment Friendly ◽  
Insulating Oil ◽  
Graphene Nanoparticles ◽  
Nano Graphene

Generally, power transformers have been using mineral oil as a liquid insulator due to its availability and excellent dielectric property. However, petroleum sources are depleting, which implies that mineral oil is going to be limited in availability. So, this research is to investigate on vegetable oil with nanographene filler as a substitution. Vegetable insulating oil is considered as environment-friendly insulating oil due to their superiority of biodegradable, nature-friendly, high fire-point, and good level of breakdown voltage (BV). Nevertheless, vegetable insulating oil have high viscosity, leading to a slow flow rate on the cooling performance of power transformers. To solve this problem, a process of transesterification was used to produce palm oil methyl ester (POME) from a refined bleached deodorized palm olein (RBDPO) to reduce its viscosity. RBDPO and POME were used as two kinds of fluid-based to combine with graphene nanoparticles (GNPs). Electrical breakdown voltage tests were performed by the IEC60156 standard. The results shown that POME have higher BV than RBDPO but adding GNPs may lead to lower BV even with a small amount of concentration. Nevertheless, every nanofluid has a higher BV than 30 kV.

scholarly journals Dielectric Properties of Electrical Insulating Liquids for High Voltage Electric Devices in a Time-Varying Electric Field

Energies ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 391
Author(s):  
Peter Havran ◽  
Roman Cimbala ◽  
Juraj Kurimský ◽  
Bystrík Dolník ◽  
Iraida Kolcunová ◽  
...  
Keyword(s):  
Dielectric Properties ◽  
Electric Field ◽  
Electric Power ◽  
Mineral Oil ◽  
Dielectric Losses ◽  
Time Varying ◽  
Power Equipment ◽  
Debye Relaxation ◽  
Insulating Liquids ◽  
Hydrocarbon Oil

The motivation to improve components in electric power equipment brings new proposals from world-renowned scientists to strengthen them in operation. An essential part of every electric power equipment is its insulation system, which must have the best possible parameters. The current problem with mineral oil replacement is investigating and testing other alternative electrical insulating liquids. In this paper, we present a comparison of mineral and hydrocarbon oil (liquefied gas) in terms of conductivity and relaxation mechanisms in the complex plane of the Cole-Cole diagram and dielectric losses. We perform the comparison using the method of dielectric relaxation spectroscopy in the frequency domain at different intensities of the time-varying electric field 0.5 kV/m, 5 kV/m, and 50 kV/m. With the increasing intensity of the time-varying electric field, there is a better approximation of the Debye behavior in all captured polarization processes of the investigated oils. By comparing the distribution of relaxation times, mineral oil shows closer characteristics to Debye relaxation. From the point of view of dielectric losses at the main frequency, hydrocarbon oil achieves better dielectric properties at all applied intensities of the time-varying electric field, which is very important for practical use.

scholarly journals Electrical insulating liquid: A review

2017 ◽  
Vol 07 (04) ◽  
pp. 1730001 ◽  
Author(s):  
Deba Kumar Mahanta ◽  
Shakuntala Laskar
Keyword(s):  
Coconut Oil ◽  
Mineral Oil ◽  
Insulating Materials ◽  
Insulating Material ◽  
Insulating Liquids ◽  
Materials Used ◽  
Insulating Liquid ◽  
Transformer Insulation ◽  
Oil Sunflower

Insulating liquid plays an important role for the life span of the transformer. Petroleum-based mineral oil has become dominant insulating liquid of transformer for more than a century for its excellent dielectric and cooling properties. However, the usage of petroleum-based mineral oil, derived from a nonrenewable energy source, has affected the environment for its nonbiodegradability property. Therefore, researchers direct their attention to renewable and biodegradable alternatives. Palm fatty acid ester, coconut oil, sunflower oil, etc. are considered as alternatives to replace mineral oil as transformer insulation liquid. This paper gives an extensive review of different liquid insulating materials used in a transformer. Characterization of different liquids as an insulating material has been discussed. An attempt has been made to classify different insulating liquids-based on different properties.

Sign in / Sign up

Export Citation Format

Share Document