scholarly journals UV Sensitivity of Free and Immobilized on Chitosan Matrix Proteases

2020 ◽  
Vol 2 (1) ◽  
pp. 17
Author(s):  
Svetlana Pankova ◽  
Marina Holyavka ◽  
Valeriy Artyukhov
Keyword(s):  
Uv Irradiation ◽  
Living Systems ◽  
Essential Factor ◽  
Active Centers ◽  
Santa Ana ◽  
Uv Sensitivity ◽  
Chitosan Matrix ◽  
Lowry Method ◽  
The Stability

UV irradiation is an essential factor in natural and artificial climate in modern environmental conditions, which has a constant effect on living systems. Collagenase, bromelain, ficin, papain (Sigma-Aldrich: St. Louis, MO, USA) and trypsin (MP biomedicals: Santa Ana, CA, USA) were the objects of this study. The substrate for hydrolysis was BSA (Sigma-Aldrich: St. Louis, MO, USA), the carriers for immobilization were chitosans (<100, 200 and 350 kDa) and chitosan succinate (Bioprogress: Shchyolkovo, Russia). The protease immobilization was carried out by the adsorption. The determination of the protein amount in samples and their catalytic activity was carried out by the modified Lowry method. UV irradiation of proteases was performed using doses 151–6040 J/m2. By the degree of photosensitivity, hydrolases can be arranged in the next row: collagenase → bromelain → ficin → papain → trypsin. Adsorption on a chitosan and succinate of chitosan leads to an increase in the stability to ultraviolet light of heterogeneous (immobilized) biocatalysts compared to free enzymes. Photoprotective effect of the chitosan may be due to the following reasons: enzyme interact with the chitosan to form photo resistant complexes; сhitosan screens active free-radicals, preventing the photooxidation of a certain number of amino acids, including the active centers of the studied enzymes under the influence of UV irradiation.

Determining the Norton’s Equivalent Model of Distribution System with Distributed Generation (DG) for Stability Analysis

2019 ◽  
Vol 12 (2) ◽  
pp. 190-198
Author(s):  
Sunny Katyara ◽  
Lukasz Staszewski ◽  
Faheem Akhtar Chachar
Keyword(s):  
Distributed Generation ◽  
Normal Condition ◽  
Distribution System ◽  
Distribution Networks ◽  
Equivalent Model ◽  
Stability Factor ◽  
Matlab Simulation ◽  
The Stability ◽  
Stability Issues

Background: Since the distribution networks are passive until Distributed Generation (DG) is not being installed into them, the stability issues occur in the distribution system after the integration of DG. Methods: In order to assure the simplicity during the calculations, many approximations have been proposed for finding the system’s parameters i.e. Voltage, active and reactive powers and load angle, more efficiently and accurately. This research presents an algorithm for finding the Norton’s equivalent model of distribution system with DG, considering from receiving end. Norton’s model of distribution system can be determined either from its complete configuration or through an algorithm using system’s voltage and current profiles. The algorithm involves the determination of derivative of apparent power against the current (dS/dIL) of the system. Results: This work also verifies the accuracy of proposed algorithm according to the relative variations in the phase angle of system’s impedance. This research also considers the varying states of distribution system due to switching in and out of DG and therefore Norton’s model needs to be updated accordingly. Conclusion: The efficacy of the proposed algorithm is verified through MATLAB simulation results under two scenarios, (i) normal condition and (ii) faulty condition. During normal condition, the stability factor near to 1 and change in dS/dIL was near to 0 while during fault condition, the stability factor was higher than 1 and the value of dS/dIL was away from 0.

Synthesis and solvatochromic studies of 2- amino-3-phenolazo1-(4-sulfophenyl)-3-methyi-5-pyrozolone and use it for the determination of trace amount of Nickel (II) in blood samples

2016 ◽  
Vol 5 (10) ◽  
pp. 4920
Author(s):  
Amar M. Ali ◽  
Hussain. J. Mohammed*
Keyword(s):  
Stability Constant ◽  
Trace Amount ◽  
Benzenesulfonic Acid ◽  
Determination Method ◽  
Blood Samples ◽  
Determination Of Nickel ◽  
Normal Human ◽  
The Stability ◽  
Normal Human Blood

A new, simple, sensitive and rapid spectrophotometric method is proposed for the determination of trace amount of Nickel (II). The method is based on the formation of a 1:2 complex with 4-(4-((2-hydroxy-6-nitrophenyl) diazenyl) -3-methyl-5-oxo-2, 5-dihydro-1H-pyrazol-1-yl) benzenesulfonic acid (2-ANASP) as a new reagent is developed. The complex has a maximum absorption at 516 nm and εmax of 1. 84 X 105 L. mol-1. cm-1. A linear correlation (0. 25 – 4. 0μg. ml-1) was found between absorbance at λmax and concentration. The accuracy and reproducibility of the determination method for various known amounts of Nickel (II) were tested. The results obtained are both precise (RSD was 1. 2 %) and accurate (relative error was 0. 787 %). The effect of diverse ions on the determination of Nickel (II) to investigate the selectivity of the method were also studied. The stability constant of the product was 0. 399 X 106 L. mol-1. The proposed method was successfully applied to the analysis of diabetes blood and normal human blood. 

scholarly journals Determination of Objective Weights Using a New Method Based on the Removal Effects of Criteria (MEREC)

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 525 ◽  
Author(s):  
Mehdi Keshavarz-Ghorabaee ◽  
Maghsoud Amiri ◽  
Edmundas Kazimieras Zavadskas ◽  
Zenonas Turskis ◽  
Jurgita Antucheviciene
Keyword(s):  
Essential Elements ◽  
New Method ◽  
Multi Criteria Decision Making ◽  
Analysis Of Means ◽  
Simulation Based ◽  
Criteria Weights ◽  
The Stability ◽  
Computational Analyses ◽  
Weighting Methods

The weights of criteria in multi-criteria decision-making (MCDM) problems are essential elements that can significantly affect the results. Accordingly, researchers developed and presented several methods to determine criteria weights. Weighting methods could be objective, subjective, and integrated. This study introduces a new method, called MEREC (MEthod based on the Removal Effects of Criteria), to determine criteria’ objective weights. This method uses a novel idea for weighting criteria. After systematically introducing the method, we present some computational analyses to confirm the efficiency of the MEREC. Firstly, an illustrative example demonstrates the procedure of the MEREC for calculation of the weights of criteria. Secondly, a comparative analysis is presented through an example for validation of the introduced method’s results. Additionally, we perform a simulation-based analysis to verify the reliability of MEREC and the stability of its results. The data of the MCDM problems generated for making this analysis follow a prevalent symmetric distribution (normal distribution). We compare the results of the MEREC with some other objective weighting methods in this analysis, and the analysis of means (ANOM) for variances shows the stability of its results. The conducted analyses demonstrate that the MEREC is efficient to determine objective weights of criteria.

scholarly journals Determination of Transverse Shear Stiffness of Sandwich Panels with a Corrugated Core by Numerical Homogenization

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1976
Author(s):  
Tomasz Garbowski ◽  
Tomasz Gajewski
Keyword(s):  
Transverse Shear ◽  
Shear Stiffness ◽  
The Finite Element Method ◽  
Homogenization Procedure ◽  
Plate Structures ◽  
Corrugated Board ◽  
Energy Equivalence ◽  
The Stability ◽  
Global Stiffness Matrix

Knowing the material properties of individual layers of the corrugated plate structures and the geometry of its cross-section, the effective material parameters of the equivalent plate can be calculated. This can be problematic, especially if the transverse shear stiffness is also necessary for the correct description of the equivalent plate performance. In this work, the method proposed by Biancolini is extended to include the possibility of determining, apart from the tensile and flexural stiffnesses, also the transverse shear stiffness of the homogenized corrugated board. The method is based on the strain energy equivalence between the full numerical 3D model of the corrugated board and its Reissner-Mindlin flat plate representation. Shell finite elements were used in this study to accurately reflect the geometry of the corrugated board. In the method presented here, the finite element method is only used to compose the initial global stiffness matrix, which is then condensed and directly used in the homogenization procedure. The stability of the proposed method was tested for different variants of the selected representative volume elements. The obtained results are consistent with other technique already presented in the literature.

scholarly journals Engineering motile aqueous phase-separated droplets via liposome stabilisation

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Shaobin Zhang ◽  
Claudia Contini ◽  
James W. Hindley ◽  
Guido Bolognesi ◽  
Yuval Elani ◽  
...  
Keyword(s):  
Aqueous Phase ◽  
Marangoni Effect ◽  
Living Systems ◽  
Biological Processes ◽  
Biological Applications ◽  
Emulsion System ◽  
Biotechnological Potential ◽  
New Directions ◽  
Directional Motion ◽  
The Stability

AbstractThere are increasing efforts to engineer functional compartments that mimic cellular behaviours from the bottom-up. One behaviour that is receiving particular attention is motility, due to its biotechnological potential and ubiquity in living systems. Many existing platforms make use of the Marangoni effect to achieve motion in water/oil (w/o) droplet systems. However, most of these systems are unsuitable for biological applications due to biocompatibility issues caused by the presence of oil phases. Here we report a biocompatible all aqueous (w/w) PEG/dextran Pickering-like emulsion system consisting of liposome-stabilised cell-sized droplets, where the stability can be easily tuned by adjusting liposome composition and concentration. We demonstrate that the compartments are capable of negative chemotaxis: these droplets can respond to a PEG/dextran polymer gradient through directional motion down to the gradient. The biocompatibility, motility and partitioning abilities of this droplet system offers new directions to pursue research in motion-related biological processes.

scholarly journals Charge Transfer Complexes of Ketotifen with 2,3-Dichloro-5,6-dicyano-p-benzoquinone and 7,7,8,8-Tetracyanoquodimethane: Spectroscopic Characterization Studies

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 2039
Author(s):  
Gamal A. E. Mostafa ◽  
Ahmed Bakheit ◽  
Najla AlMasoud ◽  
Haitham AlRabiah
Keyword(s):  
Charge Transfer ◽  
Spectroscopic Characterization ◽  
Molar Ratio ◽  
Charge Transfer Complexes ◽  
Physical Parameters ◽  
Spectrophotometric Methods ◽  
Theoretical Approaches ◽  
The Stability ◽  
Ct Complexes

The reactions of ketotifen fumarate (KT) with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as π acceptors to form charge transfer (CT) complexes were evaluated in this study. Experimental and theoretical approaches, including density function theory (DFT), were used to obtain the comprehensive, reliable, and accurate structure elucidation of the developed CT complexes. The CT complexes (KT-DDQ and KT-TCNQ) were monitored at 485 and 843 nm, respectively, and the calibration curve ranged from 10 to 100 ppm for KT-DDQ and 2.5 to 40 ppm for KT-TCNQ. The spectrophotometric methods were validated for the determination of KT, and the stability of the CT complexes was assessed by studying the corresponding spectroscopic physical parameters. The molar ratio of KT:DDQ and KT:TCNQ was estimated at 1:1 using Job’s method, which was compatible with the results obtained using the Benesi–Hildebrand equation. Using these complexes, the quantitative determination of KT in its dosage form was successful.

scholarly journals Bleaching of chlorophylls by UV irradiation in vitro: The effects on chlorophyll organization in acetone and n-hexane

2008 ◽  
Vol 73 (3) ◽  
pp. 271-282 ◽  
Author(s):  
Jelena Zvezdanovic ◽  
Dejan Markovic
Keyword(s):  
Uv Irradiation ◽  
Photosynthetic Pigments ◽  
Energy Input ◽  
First Order ◽  
First Order Kinetics ◽  
Uv Photons ◽  
The Stability ◽  
Major Factors

The stability of chlorophylls toward UV irradiation was studied by Vis spectrophotometry in extracts containing mixtures of photosynthetic pigments in acetone and n-hexane. The chlorophylls underwent destruction (bleaching) obeying first-order kinetics. The bleaching was governed by three major factors: the energy input of the UV photons, the concentration of the chlorophylls and the polarity of the solvent, implying different molecular organizations of the chlorophylls in the two solvents.

Sign in / Sign up

Export Citation Format

Share Document