scholarly journals Scavenging Ports’ Optimal Design of a Two-Stroke Small Aeroengine Based on the Benson/Bradham Model

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2739 ◽  
Author(s):  
Yuan Qiao ◽  
Xucheng Duan ◽  
Kaisheng Huang ◽  
Yizhou Song ◽  
Jianan Qian
Keyword(s):  
Optimal Design ◽  
Tilt Angle ◽  
Initial Conditions ◽  
Engine Performance ◽  
Operating Conditions ◽  
Trapping Efficiency ◽  
Slip Angle ◽  
Width Ratio ◽  
Delivery Ratio ◽  
Scavenging Efficiency

The two-stroke engine is a common power source for small and medium-sized unmanned aerial vehicles (UAV), which has wide civil and military applications. To improve the engine performance, we chose a prototype two-stroke small areoengine, and optimized the geometric parameters of the scavenging ports by performing one-dimensional (1D) and three-dimensional (3D) computational fluid dynamics (CFD) coupling simulations. The prototype engine is tested on a dynamometer to measure in-cylinder pressure curves, as a reference for subsequent simulations. A GT Power simulation model is established and validated against experimental data to provide initial conditions and boundary conditions for the subsequent AVL FIRE simulations. Four parameters are considered as optimal design factors in this research: Tilt angle of the central scavenging port, tilt angle of lateral scavenging ports, slip angle of lateral scavenging ports, and width ratio of the central scavenging port. An evaluation objective function based on the Benson/Bradham model is selected as the optimization goal. Two different operating conditions, including the take-off and cruise of the UAV are considered. The results include: (1) Orthogonal experiments are analyzed, and the significance of parameters are discussed; (2) the best factors combination is concluded, followed by simulation verification; (3) results before and after optimization are compared in details, including specific scavenging indexes (delivery ratio, trapping efficiency, scavenging efficiency, etc.), conventional performance indicators, and the sectional views of gas composition distribution inside the cylinder.

Simulation and experimental investigation of swirl-loop scavenging in two-stroke diesel engine with two poppet valves

2020 ◽  
pp. 146808742091608 ◽  
Author(s):  
Zheng Xu ◽  
Fenzhu Ji ◽  
Shuiting Ding ◽  
Yunhai Zhao ◽  
Yan Wang ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Influence Factors ◽  
Engine Performance ◽  
Trapping Efficiency ◽  
Delivery Ratio ◽  
Tracer Gas ◽  
Simulation And Experiment ◽  
Scavenging Efficiency ◽  
Stroke Engine ◽  
Poppet Valves

Scavenging is becoming one of the determinants of two-stroke engine performance. Efficiency of U-type loop scavenging of two-stroke diesel engine with two poppet valves is generally unsatisfactory due to scavenging short-circuiting and large amount of residual burned gas in cylinder, and it is hard to generate the swirl that facilitates fuel spray mixing and combustion. In order to deal with the above issues, a swirl-loop scavenging configuration is proposed to involve swirl and depress short-circuiting. To investigate swirl-loop scavenging performance, this article simulates the scavenging process by numerical method, optimizes the tracer gas method to measure and evaluate the scavenging performance, as well as analyzes the influence factors. The results demonstrate that, compared with U-type loop scavenging, the trapping efficiency and scavenging efficiency of swirl-loop scavenging respectively increase by 8% and 10%. Change of engine speed has an impact on the delivery ratio and trapping efficiency but load does not. Both intake and exhaust valve timings affect scavenging performance and short-circuiting to a large extent. In addition, the accuracy of tracer gas method in measurement of scavenging performance parameters is improved, and the scavenging efficiency deviation between simulation and experiment is decreased from 6% to 2%.

scholarly journals CFD Analysis of a Large Marine Engine Scavenging Process

Processes ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 141
Author(s):  
Tomislav Senčić ◽  
Vedran Mrzljak ◽  
Vedran Medica-Viola ◽  
Igor Wolf
Keyword(s):  
Engine Performance ◽  
Passive Scalar ◽  
Trapping Efficiency ◽  
Pollutant Emissions ◽  
Delivery Ratio ◽  
Engine Operation ◽  
Marine Diesel ◽  
Operation Parameters ◽  
Scavenging Efficiency ◽  
Charging Efficiency

The scavenging process is an important part of the two-stroke engine operation. Its efficiency affects the global engine performance such as power, fuel consumption, and pollutant emissions. Slow speed marine diesel engines are uniflow scavenged, which implies inlet scavenging ports on the bottom of the liner and an exhaust valve on the top of the cylinder. A CFD model of such an engine process was developed with the OpenFOAM software tools. A 12-degree sector of the mesh was used corresponding to one of the 30 scavenging ports. A mesh sensitivity test was performed, and the cylinder pressure was compared to experimental data for the analyzed part of the process. The scavenging performances were analyzed for real operation parameters. The influence of the scavenge air pressure and inlet ports geometric orientation was analyzed. The scavenging process is analyzed by means of a passive scalar representing fresh air in the cylinder. Isosurfaces that show the concentration of fresh air were presented. The variation of oxygen and carbon dioxide with time and the axial and angular momentum in the cylinder were calculated. Finally, the scavenging performance for the various operation parameters was evaluated by means of scavenging efficiency, charging efficiency, trapping efficiency, and delivery ratio. It was found that the scavenging efficiency decreases with the engine load due to the shorter time for the process. The scavenging efficiency increases with the pressure difference between the exhaust and scavenging port, and the scavenging efficiency decreases with the increase in the angle of the scavenging ports. It was concluded that smaller angles than the industry standard of 20° could be beneficial to the scavenging efficiency. In the investigation, the charging efficiency ranged from 0.91 to over 0.99, the trapping efficiency ranged from 0.54 to 0.83, the charging efficiency ranged from 0.78 to 0.92, and the delivery ratio ranged from 1.21 to 2.03.

Parametric Study of the Scavenging Process in Marine Two-Stroke Diesel Engines

2015 ◽  
Author(s):  
Fredrik Herland Andersen ◽  
Stefan Mayer
Keyword(s):  
Diesel Engines ◽  
Vortex Breakdown ◽  
Initial Conditions ◽  
Combustion Process ◽  
Operating Conditions ◽  
Exhaust Valve ◽  
Delivery Ratio ◽  
Exhaust Gas ◽  
Scale Production ◽  
Cfd Model

Large commercial ships such as container vessels and bulk carriers are propelled by low-speed, uniflow scavenged two-stroke diesel engines. The integral in-cylinder process in this type of engine is the scavenging process, where the burned gas from the combustion process is evacuated through the exhaust valve and replaced with fresh air for the subsequent compression stroke. The scavenging air enters the cylinder via inlet ports which are uncovered by the piston at bottom dead center (BDC). The exhaust gas is then displaced by the fresh air. The scavenging ports are angled to introduce a swirling component to the flow. The in-cylinder swirl is beneficial for air-fuel mixture, cooling of the cylinder liner and minimizing dead zones where pockets of exhaust gas are trapped. However, a known characteristic of swirling flows is an adverse pressure gradient in the center of the flow, which might lead to a local deficit in axial velocity and the formation of central recirculation zones, known as vortex breakdown. This paper will present a CFD analysis of the scavenging process in a MAN B&W two-stroke diesel engine. The study include a parameter sweep where the operating conditions such as air amount, port timing and scavenging pressure are varied. The CFD model comprise the full geometry from scavenge receiver to exhaust receiver. Asymmetric inlet and outlet conditions is included as well as the dynamics of a moving piston and valve. Time resolved boundary conditions corresponding to measurements from an operating, full scale production, engine as well as realistic initial conditions are used in the simulations. The CFD model provides a detailed description of the in-cylinder flow from exhaust valve opening (EVO) to exhaust valve closing (EVC). The study reveals a close coupling between the volume flow (delivery ratio) and the in-cylinder bulk purity of air which appears to be independent of operating conditions, rpm, scavenge air pressure, BMEP etc. The bulk purity of air in the cylinder shows good agreement with a simple theoretical perfect displacement model.

A Comprehensive Study on Natural Gas HCCI Engine Response to Different Initial Conditions via a Thermo-Kinetic Engine Model

2009 ◽  
Author(s):  
Omid Jahanian ◽  
Seyed Ali Jazayeri
Keyword(s):  
Natural Gas ◽  
Initial Conditions ◽  
Chemical Species ◽  
Engine Performance ◽  
Operating Conditions ◽  
Zone Model ◽  
Operating Characteristics ◽  
Hcci Engine ◽  
Engine Model ◽  
Homogenous Charge Compression Ignition

Homogenous Charge Compression Ignition (HCCI) combustion is a promising concept to reduce engine emissions and fuel consumption. In this paper, a thermo-kinetic model is developed to study the operating characteristics of a natural gas HCCI engine. The zero-dimensional single zone model consist detail chemical kinetics of natural gas oxidation including 325 reactions with 53 chemical species, and is validated with experimental results of reference works for two different engines, Volvo TD 100 and Caterpillar 3500, in 5 operating conditions. Then, the influence of parameters such as manifold temperature/pressure and equivalence ratio on in-cylinder temperature/pressure trends and start of combustion is studied. Measurements for Volvo engine show that SOC occurs 3–5 CAD earlier with every 15K increase in initial temperature. These whole results are explained in detail to describe the engine performance thoroughly.

Development of the Tracer Gas Method for Large Bore Natural Gas Engines—Part II: Measurement of Scavenging Parameters

2002 ◽  
Vol 124 (3) ◽  
pp. 686-694 ◽  
Author(s):  
D. B. Olsen ◽  
G. C. Hutcherson ◽  
B. D. Willson ◽  
C. E. Mitchell
Keyword(s):  
Natural Gas ◽  
Operating Conditions ◽  
Trapping Efficiency ◽  
Pollutant Emissions ◽  
Boost Pressure ◽  
Tracer Gas ◽  
Gas Industry ◽  
Natural Gas Engines ◽  
Natural Gas Industry ◽  
Scavenging Efficiency

In this work the tracer gas method using nitrous oxide as the tracer gas is implemented on a stationary two-stroke cycle, four-cylinder, fuel-injected large-bore natural gas engine. The engine is manufactured by Cooper-Bessemer, model number GMV-4TF. It is representative of the large bore natural gas stationary engine fleet currently in use by the natural gas industry for natural gas compression and power generation. Trapping efficiency measurements are carried out with the tracer gas method at various engine operating conditions, and used to evaluate the scavenging efficiency and trapped A/F ratio. Scavenging efficiency directly affects engine power and trapped A/F ratio has a dramatic impact on pollutant emissions. Engine operating conditions are altered through variations in boost pressure, speed, back pressure, and intake port restriction.

Experimental Evaluation of Turbo-Matching Appropriateness of B60J67, B60J68, A58N70 and A58N72 Turbo-Chargers for a Commercial Vehicle Engine

2018 ◽  
Vol 6 (11) ◽  
pp. 71
Author(s):  
Badal Dev Roy ◽  
R. Saravanan
Keyword(s):  
Internal Combustion Engines ◽  
Perfect Match ◽  
Engine Performance ◽  
Operating Conditions ◽  
Data Logger ◽  
Negative Effects ◽  
Road Test ◽  
The Road ◽  
A Charge ◽  
All Speeds

The Turbocharger is a charge booster for internal combustion engines to ensure best engine performance at all speeds and road conditions especially at the higher load.  Random selection of turbocharger may lead to negative effects like surge and choke in the breathing of the engine. Appropriate selection or match of the turbocharger (Turbomatching) is a tedious task and expensive. But perfect match gives many distinguished advantages and it is a one time task per the engine kind. This study focuses to match the turbocharger to desired engine by simulation and on road test. The objective of work is to find the appropriateness of matching of turbochargers with trim 67 (B60J67), trim 68 (B60J68),  trim 70 (A58N70) and trim 72 (A58N72) for the TATA 497 TCIC -BS III engine. In the road-test (data-logger method) the road routes like highway and slope up were considered for evaluation. The operating conditions with respect various speeds, routes and simulated outputs were compared with the help of compressor map.

scholarly journals Optimal Tuner Selection for Kalman Filter-Based Aircraft Engine Performance Estimation

2009 ◽  
Vol 132 (3) ◽  
Author(s):  
Donald L. Simon ◽  
Sanjay Garg
Keyword(s):  
Kalman Filter ◽  
Estimation Error ◽  
Engine Performance ◽  
Aircraft Engine ◽  
Operating Conditions ◽  
Performance Estimation ◽  
Experimental Simulation ◽  
Tuning Parameter ◽  
Estimation Accuracy ◽  
On Line

A linear point design methodology for minimizing the error in on-line Kalman filter-based aircraft engine performance estimation applications is presented. This technique specifically addresses the underdetermined estimation problem, where there are more unknown parameters than available sensor measurements. A systematic approach is applied to produce a model tuning parameter vector of appropriate dimension to enable estimation by a Kalman filter, while minimizing the estimation error in the parameters of interest. Tuning parameter selection is performed using a multivariable iterative search routine that seeks to minimize the theoretical mean-squared estimation error. This paper derives theoretical Kalman filter estimation error bias and variance values at steady-state operating conditions, and presents the tuner selection routine applied to minimize these values. Results from the application of the technique to an aircraft engine simulation are presented and compared with the conventional approach of tuner selection. Experimental simulation results are found to be in agreement with theoretical predictions. The new methodology is shown to yield a significant improvement in on-line engine performance estimation accuracy.

Experimental research on scavenging process of opposed-piston two-stroke gasoline engine based on tracer gas method

2021 ◽  
pp. 146808742110366
Author(s):  
Fukang Ma ◽  
Wei Yang ◽  
Yifang Wang ◽  
Junfeng Xu ◽  
Yufeng Li
Keyword(s):  
Gas Exchange ◽  
Exchange Process ◽  
Delivery Ratio ◽  
Tracer Gas ◽  
Piston Motion ◽  
Trapped Air ◽  
Exchange Performance ◽  
Gdi Engine ◽  
Gas Exchange Process ◽  
Scavenging Efficiency

The scavenging process of two stroke engine includes free exhaust, scavenging, and post intake process, which clears the burned gas in cylinder and suctions the fresh air for next cycle. The gas exchange process of Opposed-Piston Two-Stroke (OP2S) engine with gasoline direct injection (GDI) engine is a uniflow scavenging method between intake port and exhaust port. In order to investigate the characteristics of the gas exchange process in OP2S-GDI engine, a specific tracer gas method (TGM) was developed and the experiments were carried out to analyze the gas exchange performance under different intake and exhaust conditions and opposed-piston movement rule. The results show that gas exchange performance and trapped gas mass are significantly influenced by intake pressure and exhaust pressure. And it has a positive effect on the scavenging efficiency and the trapped air mass. Scavenging efficiency and trapped air mass are almost independent of pressure drop when the delivery ratio exceeds 1.4. Consequently, the delivery ratio ranges from 0.5 to 1.4 is chosen to achieve an optimization of steady running and minimum pump loss. The opposed piston motion phase difference only affects the scavenging timing. Scavenging performance is mainly influenced by scavenging timing and scavenging duration. With the increased phase difference of piston motion, the scavenging efficiency and delivery ratio increased gradually, the trapping efficiency would increase first and decrease then and reaches its maximum at 14°CA.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

Sign in / Sign up

Export Citation Format

Share Document