scholarly journals Longitudinal Dynamics Simulation Tool for Hybrid APU and Full Electric Vehicle

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1207
Author(s):  
Giulia Sandrini ◽  
Marco Gadola ◽  
Daniel Chindamo

Due to problems related to environmental pollution and fossil fuels consumption that have not infinite availability, the automotive sector is increasingly moving towards electric powertrains. The most limiting aspect of this category of vehicles is certainly the battery pack, regarding the difficulty in obtaining high range with good performance and low weights. The aim of this work is to provide a simulation tool, which allows for the analysis of the performance of different types of electric and hybrid powertrains, concerning both mechanical and electrical aspects. Through this model it is possible to test different vehicle configurations before prototype realization or to investigate the impact that subsystems’ modifications may have on a vehicle under development. This will allow to speed-up the model-based design process typical for fully electric and hybrid vehicles. The model aims to be at the same time complete but simple enough to lower the simulation time and computational burden so that it can be used in real-time applications, such as driving simulators. All this reduces the time and costs of vehicle design. Validation is also provided, based on a real vehicle and comparison with another consolidated simulation tool. Maximum error on mechanical quantities is proved to be within 5% while on electrical quantities it is always lower than 10%.

2018 ◽  
Vol 9 (3) ◽  
pp. 38 ◽  
Author(s):  
Azadeh Maroufmashat ◽  
Michael Fowler

Transportation accounts for more than 20% of the total Greenouse Gas (GHG) emissions in Canada. Switching from fossil fuels to more environmentally friendly energy sources and to Zero-Emission Vehicles (ZEVs) is a promising option for future transportation but well to wheel emission and charging/refuelling patterns must also be considered. This paper investigates the barriers to and opportunities for electric charging and hydrogen refueling infrastructure incentives in Ontario, Canada and estimates the number of Internal Combustion Engine Vehicles (ICEVs) that would be offset by infrastructure incentives. The paper also assesses the potential of electric and hybrid-electric powertrains to enable GHG reductions, explores the impact of the electricity supply mix for supporting zero-emission vehicles in different scenarios and studies the effect of the utility factor for PHEVs in Ontario. The authors compare the use of electric vehicle charging infrastructures and hydrogen refueling stations regarding overall GHG emission reductions for an infrastructure incentive funded by a 20-million-dollar government grant. The results suggest that this incentive can provide infrastructure that can offset around 9000 ICEVs vehicles using electricity charging infrastructure and 4000–8700 when using hydrogen refuelling stations. Having appropriate limitations and policy considerations for the potential 1.7 million electric-based vehicles that may be in use by 2024 in Ontario would result in 5–7 million tonne GHG avoidances in different scenarios, equivalent to the removal of 1–1.5 million ICEVs from the road.


Author(s):  
William Wiener ◽  
Koorosh Naghshineh ◽  
Brad Salisbury ◽  
Randall Rozema
Keyword(s):  

Author(s):  
David L. Kirchman

Geomicrobiology, the marriage of geology and microbiology, is about the impact of microbes on Earth materials in terrestrial systems and sediments. Many geomicrobiological processes occur over long timescales. Even the slow growth and low activity of microbes, however, have big effects when added up over millennia. After reviewing the basics of bacteria–surface interactions, the chapter moves on to discussing biomineralization, which is the microbially mediated formation of solid minerals from soluble ions. The role of microbes can vary from merely providing passive surfaces for mineral formation, to active control of the entire precipitation process. The formation of carbonate-containing minerals by coccolithophorids and other marine organisms is especially important because of the role of these minerals in the carbon cycle. Iron minerals can be formed by chemolithoautotrophic bacteria, which gain a small amount of energy from iron oxidation. Similarly, manganese-rich minerals are formed during manganese oxidation, although how this reaction benefits microbes is unclear. These minerals and others give geologists and geomicrobiologists clues about early life on Earth. In addition to forming minerals, microbes help to dissolve them, a process called weathering. Microbes contribute to weathering and mineral dissolution through several mechanisms: production of protons (acidity) or hydroxides that dissolve minerals; production of ligands that chelate metals in minerals thereby breaking up the solid phase; and direct reduction of mineral-bound metals to more soluble forms. The chapter ends with some comments about the role of microbes in degrading oil and other fossil fuels.


2019 ◽  
Vol 11 (02) ◽  
pp. 1950019 ◽  
Author(s):  
Lin Gan ◽  
He Zhang ◽  
Cheng Zhou ◽  
Lin Liu

Rotating scanning motor is the important component of synchronous scanning laser fuze. High emission overload environment in the conventional ammunition has a serious impact on the reliability of the motor. Based on the theory that the buffer pad can attenuate the impact stress wave, a new motor buffering Isolation Method is proposed. The dynamical model of the new buffering isolation structure is established by ANSYS infinite element analysis software to do the nonlinear impact dynamics simulation of rotating scanning motor. The effectiveness of Buffering Isolation using different materials is comparatively analyzed. Finally, the Macht hammer impact experiment is done, the results show that in the experience of the 70,000[Formula: see text]g impact acceleration, the new buffering Isolation method can reduce the impact load about 15 times, which can effectively alleviate the plastic deformation of rotational scanning motor and improve the reliability of synchronization scanning system. A new method and theoretical basis of anti-high overload research for Laser Fuze is presented.


Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 64 ◽  
Author(s):  
Qin Wang ◽  
Hui Xie ◽  
Zhiming Hu ◽  
Chao Liu

In this study, molecular dynamics simulations were carried out to study the coupling effect of electric field strength and surface wettability on the condensation process of water vapor. Our results show that an electric field can rotate water molecules upward and restrict condensation. Formed clusters are stretched to become columns above the threshold strength of the field, causing the condensation rate to drop quickly. The enhancement of surface attraction force boosts the rearrangement of water molecules adjacent to the surface and exaggerates the threshold value for shape transformation. In addition, the contact area between clusters and the surface increases with increasing amounts of surface attraction force, which raises the condensation efficiency. Thus, the condensation rate of water vapor on a surface under an electric field is determined by competition between intermolecular forces from the electric field and the surface.


2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Ka Chun Chong ◽  
Hong Fung ◽  
Carrie Ho Kwan Yam ◽  
Patsy Yuen Kwan Chau ◽  
Tsz Yu Chow ◽  
...  

Abstract Background The elderly healthcare voucher (EHCV) scheme is expected to lead to an increase in the number of elderly people selecting private primary healthcare services and reduce reliance on the public sector in Hong Kong. However, studies thus far have reported that this scheme has not received satisfactory responses. In this study, we examined changes in the ratio of visits between public and private doctors in primary care (to measure reliance on the public sector) for different strategic scenarios in the EHCV scheme. Methods Based on comments from an expert panel, a system dynamics model was formulated to simulate the impact of various enhanced strategies in the scheme: increasing voucher amounts, lowering the age eligibility, and designating vouchers for chronic conditions follow-up. Data and statistics for the model calibration were collected from various sources. Results The simulation results show that the current EHCV scheme is unable to reduce the utilization of public healthcare services, as well as the ratio of visits between public and private primary care among the local aging population. When comparing three different tested scenarios, even if the increase in the annual voucher amount could be maintained at the current pace or the age eligibility can be lowered to include those aged 60 years, the impact on shifts from public-to-private utilization were insignificant. The public-to-private ratio could only be marginally reduced from 0.74 to 0.64 in the first several years. Nevertheless, introducing a chronic disease-oriented voucher could result in a significant drop of 0.50 in the public-to-private ratio during the early implementation phase. However, the effect could not be maintained for an extended period. Conclusions Our findings will assist officials in improving the design of the EHCV scheme, within the wider context of promoting primary care among the elderly. We suggest that an additional chronic disease-oriented voucher can serve as an alternative strategy. The scheme must be redesigned to address more specific objectives or provide a separate voucher that promotes under-utilized healthcare services (e.g., preventive care), instead of services designed for unspecified reasons, which may lead to concerns regarding exploitation.


Safety ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 47
Author(s):  
Wattana Chanthakhot ◽  
Kasin Ransikarbum

Emergency events in the industrial sector have been increasingly reported during the past decade. However, studies that focus on emergency evacuation to improve industrial safety are still scarce. Existing evacuation-related studies also lack a perspective of fire assembly point’s analysis. In this research, location of assembly points is analyzed using the multi-criteria decision analysis (MCDA) technique based on the integrated information entropy weight (IEW) and techniques for order preference by similarity to ideal solution (TOPSIS) to support the fire evacuation plan. Next, we propose a novel simulation model that integrates fire dynamics simulation coupled with agent-based evacuation simulation to evaluate the impact of smoke and visibility from fire on evacuee behavior. Factors related to agent and building characteristics are examined for fire perception of evacuees, evacuees with physical disabilities, escape door width, fire location, and occupancy density. Then, the proposed model is applied to a case study of a home appliance factory in Chachoengsao, Thailand. Finally, results for the total evacuation time and the number of remaining occupants are statistically examined to suggest proper evacuation planning.


2020 ◽  
Vol 30 (Supplement_5) ◽  
Author(s):  
◽  

Abstract The role of the corporate sector in research sponsorship is growing. So too is the evidence that corporations whose products are potentially damaging to health or the environment influence science and the ways in which science is used in policy and practice. Such efforts are a key part of corporate attempts to maintain or increase the consumption or use of industry products, and to secure favourable policy outcomes. The products and practices of corporations are responsible for a growing proportion of the global disease burden. Non-communicable diseases, many driven by consumption of unhealthy commodities and exposure to chemicals, account for over 73 percent of global deaths. It is increasingly important to understand the complex and multifaceted ways corporations seek to influence science; the impact these strategies have; and the ways this influence can be addressed. This workshop brings together global experts to explore these issues. Drawing on examples from several industries (e.g. tobacco, alcohol, food, and pharmaceuticals), it aims to: Increase understanding of the ways corporations whose products are potentially damaging to health influence science. We present a newly developed, evidence-based typology which draws together the vast existing literature in this field, to present a simplified way of understanding corporate influence on science. Delegates will be provided with materials that provide a means for recognising such influence.Examine the influence that corporations have on the first stage in the research process - research agendas. We present examples from tobacco, food and pharmaceutical industries which illustrate the mechanism through which industry funding of science drives researchers to study questions that are favourable to industry. The desired outcome is to maximise research on the benefits of industry products (positioning these products as solutions to complex problems), minimise research on the harms of their products, support their policy and legal positions, and impede potential regulation of their products.Increase awareness of the involvement that corporations have had in altering the mechanisms though which science is used in policymaking. Delegates will hear how corporations promoted and embedded policymaking reforms which increase reliance on and provide a conduit for industry-favourable science.Suggest ways forward concerning management of conflicts of interest in the publication of health research. Here we will discuss the roles that journals can play in governing conflicts of interest and issues of transparency in the publication of academic research.Suggest ways forward for funding research on unhealthy commodities. We present criteria for tobacco industry-supported research funding programs, and discuss the applicability of similar programs for funding research on other unhealthy commodities, and on the practices of other industries such as the fossil fuels industry. Key messages Corporations have been seen to skew evidence bases, manipulate interpretations of science, and influence use of science in policy and practice – such influence is a major threat to public health. This workshop exposes industry tactics in this area and begins to identify ways for dealing with them.


2014 ◽  
Vol 660 ◽  
pp. 386-390 ◽  
Author(s):  
Norazwan Azman ◽  
Mirnah Suardi ◽  
Amir Khalid

The use of fossil fuels as energy sources has grown to significantly be likely to have a major environmental impact. Reduction of world oil reserves and increasing environmental concerns have prompted alternative is found and renewable source of energy called biodiesel. Biodiesel fuel from vegetable oil is considered as the best candidates for diesel fuel replacement in diesel engines because of its closer. Fuel prices are going up day by day in the world. Thus, the means and methods have been trying for years to get fuel alternative outcomes. This study investigated the effects of different storage periods used in quality biodiesel blends (B5, B10, B15) of waste cooking oil and diesel fuel under low temperature and the temperature of the environment. Biodiesel samples were stored in glass containers under indoor conditions, and outdoor conditions for 10 weeks in total. These samples were monitored on a weekly basis through the test properties. The experimental density, viscosity, acid value, water content and flash point discussed in detail. Biodiesel storage at low temperatures is suitable and more advantageous because the impact on the physical properties is minimal and beneficial to slow down the degradation of biodiesel and storage.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4447
Author(s):  
Hokey Min ◽  
Yohannes Haile

With a growing demand for safe, clean, and affordable energy, countries across the world are now seeking to create and rapidly develop renewable energy (RE) businesses. The success of these businesses often hinges on their ability to translate RE into sustainable value for energy consumers and the multiple stakeholders in the energy industry. Such value includes low production costs due to an abundance of natural resources (e.g., wind, water, sunlight), and public health benefits from reduced environmental pollution. Despite the potential for value creation, many RE businesses have struggled to create affordable energy as abundant as that which is produced by traditional fossil fuels. The rationale being that traditional RE sources emanating from natural resources tend to rely on unpredictable weather conditions. Therefore, to help RE businesses deliver sustainable value, we should leverage disruptive innovation that is less dependent on natural resources. This paper is one of the first attempts to assess the impact of disruptive innovation on RE business performances based on the survey data obtained from multiple countries representing both emerging and developed economies.


Sign in / Sign up

Export Citation Format

Share Document