scholarly journals Yo-Yo Inspired Triboelectric Nanogenerator

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1798
Author(s):  
Deokjae Heo ◽  
Jihoon Chung ◽  
Gunsub Shin ◽  
Minhyeong Seok ◽  
Chanhee Lee ◽  
...  
Keyword(s):  
Dielectric Material ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Triboelectric Nanogenerator ◽  
Power Sources ◽  
Vast Number ◽  
Hand Motion ◽  
Energy Harvesters ◽  
Triboelectric Nanogenerators ◽  
And Function

Recently, as the demand for sustainable and renewable energy to power a large number of small electronics and sensors has increased, various mechanical energy harvesters such as electromagnetic, piezoelectric, and triboelectric generators have been highlighted because they have no environmental constraints to generate electricity and function as sustainable power sources. Among these generators, triboelectric nanogenerators (TENGs), which produce electrical energy via triboelectrification and electrostatic induction, are a promising energy harvesting technology that can utilize existing materials or the structure of existing commercial products. Considering the vast number of independent portable electronics used today, the development of hand-driven TENGs is important. There is great demand for TENG considering both commercial product-inspired designs, which are the merit of TENG itself, and the hand-driven type. However, relevant studies are still lacking, and therefore further studies in these areas are required. In this study, we developed a novel triboelectric nanogenerator (Y-TENG) inspired by the Yo-Yo that can produce a sustainable electric output by hand motion input. One generator of Y-TENG produced a maximum VOC of 10 V and an ICC of 0.7 μA. Peak/root mean square (RMS) voltage output-based quantitative analysis for the optimized number of blades and dielectric material was performed. The proposed Y-TENG was able to continuously light up three light-emitting diodes (LEDs) while the Y-TENG moved up and down.

scholarly journals Recent Progress in Self-Powered Sensors Based on Triboelectric Nanogenerators

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7129
Author(s):  
Junpeng Wu ◽  
Yang Zheng ◽  
Xiaoyi Li
Keyword(s):  
Mechanical Energy ◽  
Rapid Development ◽  
Electrical Energy ◽  
Displacement Current ◽  
Triboelectric Nanogenerator ◽  
Energy Harvesters ◽  
The Future ◽  
Quantitative Analysis Method ◽  
Self Powered ◽  
Triboelectric Nanogenerators

The emergence of the Internet of Things (IoT) has subverted people’s lives, causing the rapid development of sensor technologies. However, traditional sensor energy sources, like batteries, suffer from the pollution problem and the limited lifetime for powering widely implemented electronics or sensors. Therefore, it is essential to obtain self-powered sensors integrated with renewable energy harvesters. The triboelectric nanogenerator (TENG), which can convert the surrounding mechanical energy into electrical energy based on the surface triboelectrification effect, was born of this background. This paper systematically introduces the working principle of the TENG-based self-powered sensor, including the triboelectrification effect, Maxwell’s displacement current, and quantitative analysis method. Meanwhile, this paper also reviews the recent application of TENG in different fields and summarizes the future development and current problems of TENG. We believe that there will be a rise of TENG-based self-powered sensors in the future.

scholarly journals Triboelectric nanogenerator based on Teflon/vitamin B1 powder for self-powered humidity sensing

2020 ◽  
Vol 11 ◽  
pp. 1394-1401
Author(s):  
Liangyi Zhang ◽  
Huan Li ◽  
Yiyuan Xie ◽  
Jing Guo ◽  
Zhiyuan Zhu
Keyword(s):  
Relative Humidity ◽  
Mechanical Energy ◽  
Vitamin B1 ◽  
Cost Effective ◽  
Electrical Energy ◽  
Open Circuit ◽  
Triboelectric Nanogenerator ◽  
Cost Effective Method ◽  
Self Powered ◽  
Triboelectric Nanogenerators

Recently, there has been growing interest in triboelectric nanogenerators (TENGs) that can effectively convert various forms of mechanical energy input into electrical energy. In the present study, a novel Teflon/vitamin B1 powder based triboelectric nanogenerator (TVB-TENG) is proposed. Paper is utilized as a supporting platform for triboelectrification between a commercial Teflon tape and vitamin B1 powder. The measured open-circuit voltage was approximately 340 V. The TVB-TENG can be applied as a humidity sensor and exhibits a linear and reversible response to the relative humidity of the environment. Moreover, the change in relative humidity is also indicated by the change in luminosity of a set of light-emitting diodes (LEDs) integrated in the TVB-TENG system. The TVB-TENG proposed in this study illustrates a cost-effective method for portable power supply and sensing devices.

scholarly journals A Contact-Mode Triboelectric Nanogenerator for Energy Harvesting from Marine Pipe Vibrations

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1514
Author(s):  
Rui Li ◽  
He Zhang ◽  
Li Wang ◽  
Guohua Liu
Keyword(s):  
Energy Harvesting ◽  
Dielectric Material ◽  
Mechanical Energy ◽  
Experimental Tests ◽  
Electrical Energy ◽  
Underlying Mechanism ◽  
Triboelectric Nanogenerator ◽  
Contact Mode ◽  
Output Performance ◽  
Ocean Environment

Structural health monitoring is of great significance to ensure the safety of marine pipes, while powering the required monitoring sensors remains a problem because the ocean environment is not amenable to the traditional ways of providing an external power supply. However, mechanical energy due to the vortex-induced vibration of pipelines may be harvested to power those sensors, which is a convenient, economic and environmentally friendly way. We here exploit a contact-separation mode triboelectric nanogenerator (TENG) to create an efficient energy harvester to transform the mechanical energy of vibrating pipes into electrical energy. The TENG device is composed of a tribo-pair of dielectric material films that is connected to a mass-spring base to guarantee the contact-separation motions of the tribo-pair. Experimental tests are conducted to demonstrate the output performance and long-term durability of the TENG device by attaching it to a sample pipe. A theoretical model for the energy harvesting system is developed for predicting the electrical output performance of the device. It is established that the normalized output power depends only on two compound variables with all typical factors taken into consideration simultaneously. The simple scale law is useful to reveal the underlying mechanism of the device and can guideline the optimization of the device based on multi-parameters analyses. The results here may provide references for designing contact-mode TENG energy harvesting devices based on the vibration of marine pipes and similar structures.

scholarly journals Investigation of biocompatible Parylene as triboelectric layer for wearable energy harvesting

2021 ◽  
Vol 7 (2) ◽  
pp. 771-774
Author(s):  
Franz Selbmann ◽  
Mario Baum ◽  
Marco Bobinger ◽  
Markus Gottwald ◽  
Maik Wiemer ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Material Properties ◽  
Dielectric Material ◽  
Low Frequency ◽  
Electrical Energy ◽  
Body Movements ◽  
Mechanical Motion ◽  
Energy Harvesters ◽  
Triboelectric Nanogenerators ◽  
High Output

Abstract Triboelectric nanogenerators (TENGs) are energy converters or energy harvesters that convert mechanical motion into electrical energy on the basis of their material properties. A particular advantage of the TENG is its ability to convert small, low-frequency and random mechanical movements that are relevant for body movements and wearable applications. Within the presented study, different Parylene types were analysed as the dielectric material in TENG and found to be promising with respect to providing high output voltages and powers, respectively. Besides the verification of the usability of Parylene for TENG and its superior triboelectric properties, also significant differences were found between the Parylene types.

scholarly journals Self-rechargeable cardiac pacemaker system with triboelectric nanogenerators

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Hanjun Ryu ◽  
Hyun-moon Park ◽  
Moo-Kang Kim ◽  
Bosung Kim ◽  
Hyoun Seok Myoung ◽  
...  
Keyword(s):  
Medical Devices ◽  
Mechanical Energy ◽  
Cardiac Pacemaker ◽  
Operation Time ◽  
Lithium Ion ◽  
The Body ◽  
Body Motion ◽  
Triboelectric Nanogenerator ◽  
Implantable Medical Devices ◽  
Energy Harvesters

AbstractSelf-powered implantable devices have the potential to extend device operation time inside the body and reduce the necessity for high-risk repeated surgery. Without the technological innovation of in vivo energy harvesters driven by biomechanical energy, energy harvesters are insufficient and inconvenient to power titanium-packaged implantable medical devices. Here, we report on a commercial coin battery-sized high-performance inertia-driven triboelectric nanogenerator (I-TENG) based on body motion and gravity. We demonstrate that the enclosed five-stacked I-TENG converts mechanical energy into electricity at 4.9 μW/cm3 (root-mean-square output). In a preclinical test, we show that the device successfully harvests energy using real-time output voltage data monitored via Bluetooth and demonstrate the ability to charge a lithium-ion battery. Furthermore, we successfully integrate a cardiac pacemaker with the I-TENG, and confirm the ventricle pacing and sensing operation mode of the self-rechargeable cardiac pacemaker system. This proof-of-concept device may lead to the development of new self-rechargeable implantable medical devices.

scholarly journals Triboelectric nanogenerators (TENG): Factors affecting its efficiency and applications

2021 ◽  
Vol 34 (2) ◽  
pp. 157-172
Author(s):  
Deepak Anand ◽  
Singh Sambyal ◽  
Rakesh Vaid
Keyword(s):  
Large Scale ◽  
Review Paper ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Wearable Electronics ◽  
Factors Affecting ◽  
Electrostatic Induction ◽  
Triboelectric Nanogenerators ◽  
Human Motions ◽  
Great Scope

The demand for energy is increasing tremendously with modernization of the technology and requires new sources of renewable energy. The triboelectric nanogenerators (TENG) are capable of harvesting ambient energy and converting it into electricity with the process of triboelectrification and electrostatic-induction. TENG can convert mechanical energy available in the form of vibrations, rotation, wind and human motions etc., into electrical energy there by developing a great scope for scavenging large scale energy. In this review paper, we have discussed various modes of operation of TENG along with the various factors contributing towards its efficiency and applications in wearable electronics.

scholarly journals Hollow Piezoelectric Ceramic Fibers for Energy Harvesting Fabrics

2013 ◽  
Vol 8 (1) ◽  
pp. 155892501300800
Author(s):  
François M. Guillot ◽  
Haskell W. Beckham ◽  
Johannes Leisen
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Lead Zirconate ◽  
Ceramic Fibers ◽  
Power Sources ◽  
Electromechanical Performance ◽  
Alternative Power

In the past few years, the growing need for alternative power sources has generated considerable interest in the field of energy harvesting. A particularly exciting possibility within that field is the development of fabrics capable of harnessing mechanical energy and delivering electrical power to sensors and wearable devices. This study presents an evaluation of the electromechanical performance of hollow lead zirconate titanate (PZT) fibers as the basis for the construction of such fabrics. The fibers feature individual polymer claddings surrounding electrodes directly deposited onto both inside and outside ceramic surfaces. This configuration optimizes the amount of electrical energy available by placing the electrodes in direct contact with the surface of the material and by maximizing the active piezoelectric volume. Hollow fibers were electroded, encapsulated in a polymer cladding, poled and characterized in terms of their electromechanical properties. They were then glued to a vibrating cantilever beam equipped with a strain gauge, and their energy harvesting performance was measured. It was found that the fibers generated twice as much energy density as commercial state-of-the-art flexible composite sensors. Finally, the influence of the polymer cladding on the strain transmission to the fiber was evaluated. These fibers have the potential to be woven into fabrics that could harvest mechanical energy from the environment and could eventually be integrated into clothing.

Stress Analysis of Smart Beam Energy Harvesters

2016 ◽  
Author(s):  
Nathan S. Hosking ◽  
Zahra Sotoudeh
Keyword(s):  
Smart Materials ◽  
Mechanical Energy ◽  
Strain Analysis ◽  
Electrical Energy ◽  
Structural Dynamic ◽  
Energy Harvesters ◽  
Beam Equations ◽  
Variational Asymptotic ◽  
Strain Components ◽  
Smart Beam

In this paper, we study fully coupled electromagnetic-elastic behaviors present in the structures of smart beams using variational asymptotic beam sections and geometrically exact fully intrinsic beam equations combined in a consistent theory. We present results for smart beams under various oscillatory loads in both the axial and transverse directions and calculate the corresponding deformations. Recovery equations are employed to construct the full 3D stress and strain components in order to complete a full stress / strain analysis. Smart materials change mechanical energy to electrical energy; therefore, changing the structural dynamic behavior of the structure and its stiffness matrix.

scholarly journals A highly shape-adaptive, stretchable design based on conductive liquid for energy harvesting and self-powered biomechanical monitoring

2016 ◽  
Vol 2 (6) ◽  
pp. e1501624 ◽  
Author(s):  
Fang Yi ◽  
Xiaofeng Wang ◽  
Simiao Niu ◽  
Shengming Li ◽  
Yajiang Yin ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Three Dimensional ◽  
Power Source ◽  
Triboelectric Nanogenerator ◽  
Stretchable Electronics ◽  
Large Area ◽  
Conductive Liquid ◽  
Power Sources ◽  
Energy Harvesters ◽  
Self Powered

The rapid growth of deformable and stretchable electronics calls for a deformable and stretchable power source. We report a scalable approach for energy harvesters and self-powered sensors that can be highly deformable and stretchable. With conductive liquid contained in a polymer cover, a shape-adaptive triboelectric nanogenerator (saTENG) unit can effectively harvest energy in various working modes. The saTENG can maintain its performance under a strain of as large as 300%. The saTENG is so flexible that it can be conformed to any three-dimensional and curvilinear surface. We demonstrate applications of the saTENG as a wearable power source and self-powered sensor to monitor biomechanical motion. A bracelet-like saTENG worn on the wrist can light up more than 80 light-emitting diodes. Owing to the highly scalable manufacturing process, the saTENG can be easily applied for large-area energy harvesting. In addition, the saTENG can be extended to extract energy from mechanical motion using flowing water as the electrode. This approach provides a new prospect for deformable and stretchable power sources, as well as self-powered sensors, and has potential applications in various areas such as robotics, biomechanics, physiology, kinesiology, and entertainment.

Investigation of Vibration Energy Harvesting Using Two Cantilevers With Random Input

2017 ◽  
Author(s):  
Wei Yang ◽  
Panagiotis Alevras ◽  
Shahrzad Towfighian
Keyword(s):  
Mechanical Energy ◽  
Duffing Oscillator ◽  
Electrical Energy ◽  
Potential Energy Function ◽  
Excitation Level ◽  
Vibration Energy ◽  
Random Input ◽  
Vibration Energy Harvesting ◽  
Energy Harvesters ◽  
Low Performance

There is a growing interest to convert ambient mechanical energy to electrical energy by vibration energy harvesters. Realistic vibrations are random and spread over a large frequency range. Most energy harvesters are linear with narrow frequency bandwidth and show low performance, which led to creation of nonlinear harvesters that have larger bandwidth. This article presents a simulation study of a nonlinear energy harvester that contains two cantilever beams coupled by magnetic force. One of the cantilever beam is covered partially by piezoelectric material, while the other beam is normal to the first one and is used to create a variable potential energy function. The variable double-well potential function enables optimum conversion of the kinetic energy and thus larger output. The system is modeled by coupled Duffing oscillator equations. To represent the ambient vibrations, the response to Gaussian random input signal (generated by Shinozuka formula) is studied using power spectral density. The effects of different parameters on the system are also investigated. The results show that the double cantilever harvester has a threshold distance, where the harvester can perform optimally regardless of the excitation level. This observation is opposite to that of the conventional fixed magnet cantilever system where the optimal distance varies with the excitation level. Results of this study can be used to enhance energy efficiency of vibration energy harvesters.

Sign in / Sign up

Export Citation Format

Share Document