scholarly journals Durum-Wheat Straw Bales for Thermal Insulation of Buildings: Findings from a Comparative Energy Analysis of a Set of Wall-Composition Samples on the Building Scale

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5508
Author(s):  
Domenico Palladino ◽  
Flavio Scrucca ◽  
Nicolandrea Calabrese ◽  
Grazia Barberio ◽  
Carlo Ingrao
Keyword(s):  
Durum Wheat ◽  
Wheat Straw ◽  
Heat Loss ◽  
Energy Demand ◽  
Average Energy ◽  
Energy System ◽  
Energy Performance ◽  
Calculation Procedure ◽  
Energy Calculation ◽  
Calculation Methods

The urgent need to make buildings more performant in energy and environmental terms has led to the increasing study of recycled and natural materials as viable solutions. In this context, the present study aims at comparing the energy performance of innovative wall-sample solutions (with recycled polyethylene-terephthalate panels or durum-wheat straw bales) with a basic one. Energy evaluations were performed in Piazza Armerina (a city of Sicily–Italy), where the chosen material is widespread, by applying two calculation methods: a monthly average-energy-calculation approach, mandatory by Italian regulations (UNI TS 11300), and an hourly energy-calculation procedure (EN 52016). The results documented that: (i) the new innovative wall-sample allows for significantly reducing heat loss (heating of 4–10% and cooling of 40–50%) (ii) a lower primary-energy demand was obtained by adopting the new calculation procedure of EN 52016 (energy decreasing of 20–24%); (iii) significant differences in terms of heat-loss (of 10–36%) and heat-gain (up to 75%) calculations were found for the two calculation methods. This puts emphasis upon the importance of properly selecting a calculation method by accounting for all of those key variables and features that are representative of the energy system being investigated.

scholarly journals Digital Twin-Driven Decision Making and Planning for Energy Consumption

2021 ◽  
Vol 10 (2) ◽  
pp. 37
Author(s):  
Yasmin Fathy ◽  
Mona Jaber ◽  
Zunaira Nadeem
Keyword(s):  
Energy Consumption ◽  
Energy Demand ◽  
Energy Production ◽  
Energy Use ◽  
Synthetic Data ◽  
Average Energy ◽  
Energy System ◽  
Real Dataset ◽  
Digital Twin ◽  
The Impact

The Internet of Things (IoT) is revolutionising how energy is delivered from energy producers and used throughout residential households. Optimising the residential energy consumption is a crucial step toward having greener and sustainable energy production. Such optimisation requires a household-centric energy management system as opposed to a one-rule-fits all approach. In this paper, we propose a data-driven multi-layer digital twin of the energy system that aims to mirror households’ actual energy consumption in the form of a household digital twin (HDT). When linked to the energy production digital twin (EDT), HDT empowers the household-centric energy optimisation model to achieve the desired efficiency in energy use. The model intends to improve the efficiency of energy production by flattening the daily energy demand levels. This is done by collaboratively reorganising the energy consumption patterns of residential homes to avoid peak demands whilst accommodating the resident needs and reducing their energy costs. Indeed, our system incorporates the first HDT model to gauge the impact of various modifications on the household energy bill and, subsequently, on energy production. The proposed energy system is applied to a real-world IoT dataset that spans over two years and covers seventeen households. Our conducted experiments show that the model effectively flattened the collective energy demand by 20.9% on synthetic data and 20.4% on a real dataset. At the same time, the average energy cost per household was reduced by 10.7% for the synthetic data and 17.7% for the real dataset.

scholarly journals Evaluation of Thermal and Energy Performance in Mosque Buildings for Current Situation (Simulation Study) in Mountainous Climate of Abha City

2020 ◽  
Vol 12 (10) ◽  
pp. 4014
Author(s):  
Ahmed Ali A. Shohan ◽  
Mohamed B. Gadi
Keyword(s):  
Thermal Comfort ◽  
Heat Loss ◽  
Energy Demand ◽  
Computer Modelling ◽  
Measurement Data ◽  
Energy Performance ◽  
Poor Quality ◽  
Heat Gain ◽  
Actual Measurement ◽  
Main Factors

Achieving and maintaining indoor thermal comfort is a crucial factor for energy saving and human health, especially in heavily occupied public buildings, such as mosque buildings. The acceptable level of thermal comfort should not be achieved at the expense of damaging the environment by using preventable energy depletion. This study aims to investigate what level thermal comfort is achieved and related issues in mosque buildings in Abha city, which has a semi-arid moderate/cold mountainous climate. The research involved a computer modelling investigation by using Thermal Analysis Software (TAS). A number of comparisons of the simulation results with actual measurement data in mosque buildings, such as temperature, relative humidity, and energy demand were conducted. Main factors influencing thermal comfort and PMV were investigated for the selected mosques. In addition, thermal performance of mosques’ fabrics and envelopes in terms of solar gain and heat loss/gain by conduction and its impacts on thermal comfort and energy demands were also discussed. The outcome showed some discomfort due to heat gain in summer and heat loss in winter. The results also revealed that the main factors behind heat gain or loss were the poor quality of the investigated mosque buildings’ envelopes, including walls, roofs, floors, windows, and doors.

scholarly journals Energy Flexibility as Additional Energy Source in Multi-Energy Systems with District Cooling

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 519
Author(s):  
Alice Mugnini ◽  
Gianluca Coccia ◽  
Fabio Polonara ◽  
Alessia Arteconi
Keyword(s):  
Energy Source ◽  
Energy Demand ◽  
Energy Systems ◽  
Energy System ◽  
Energy Performance ◽  
Primary Energy ◽  
Energy Sources ◽  
Variable Load ◽  
Additional Energy ◽  
The Impact

The integration of multi-energy systems to meet the energy demand of buildings represents one of the most promising solutions for improving the energy performance of the sector. The energy flexibility provided by the building is paramount to allowing optimal management of the different available resources. The objective of this work is to highlight the effectiveness of exploiting building energy flexibility provided by thermostatically controlled loads (TCLs) in order to manage multi-energy systems (MES) through model predictive control (MPC), such that energy flexibility can be regarded as an additional energy source in MESs. Considering the growing demand for space cooling, a case study in which the MPC is used to satisfy the cooling demand of a reference building is tested. The multi-energy sources include electricity from the power grid and photovoltaic modules (both of which are used to feed a variable-load heat pump), and a district cooling network. To evaluate the varying contributions of energy flexibility in resource management, different objective functions—namely, the minimization of the withdrawal of energy from the grid, of the total energy cost and of the total primary energy consumption—are tested in the MPC. The results highlight that using energy flexibility as an additional energy source makes it possible to achieve improvements in the energy performance of an MES building based on the objective function implemented, i.e., a reduction of 53% for the use of electricity taken from the grid, a 43% cost reduction, and a 17% primary energy reduction. This paper also reflects on the impact that the individual optimization of a building with a multi-energy system could have on other users sharing the same energy sources.

Free Energy Calculation Methods of Biomolecules

2011 ◽  
Vol 27 (5) ◽  
pp. 395-402 ◽  
Author(s):  
Changjun CHEN ◽  
Yanzhao HUANG ◽  
Yi XIAO
Keyword(s):  
Free Energy ◽  
Free Energy Calculation ◽  
Energy Calculation ◽  
Calculation Methods

scholarly journals Techno-Economic Analysis of a Novel Hydrogen-Based Hybrid Renewable Energy System for Both Grid-Tied and Off-Grid Power Supply in Japan: The Case of Fukushima Prefecture

2020 ◽  
Vol 10 (12) ◽  
pp. 4061 ◽  
Author(s):  
Naoto Takatsu ◽  
Hooman Farzaneh
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Economic Assessment ◽  
Energy System ◽  
Modeling Framework ◽  
Integrated Simulation ◽  
Hybrid Renewable Energy System ◽  
Renewable Energy System ◽  
Hybrid Renewable Energy

After the Great East Japan Earthquake, energy security and vulnerability have become critical issues facing the Japanese energy system. The integration of renewable energy sources to meet specific regional energy demand is a promising scenario to overcome these challenges. To this aim, this paper proposes a novel hydrogen-based hybrid renewable energy system (HRES), in which hydrogen fuel can be produced using both the methods of solar electrolysis and supercritical water gasification (SCWG) of biomass feedstock. The produced hydrogen is considered to function as an energy storage medium by storing renewable energy until the fuel cell converts it to electricity. The proposed HRES is used to meet the electricity demand load requirements for a typical household in a selected residential area located in Shinchi-machi in Fukuoka prefecture, Japan. The techno-economic assessment of deploying the proposed systems was conducted, using an integrated simulation-optimization modeling framework, considering two scenarios: (1) minimization of the total cost of the system in an off-grid mode and (2) maximization of the total profit obtained from using renewable electricity and selling surplus solar electricity to the grid, considering the feed-in-tariff (FiT) scheme in a grid-tied mode. As indicated by the model results, the proposed HRES can generate about 47.3 MWh of electricity in all scenarios, which is needed to meet the external load requirement in the selected study area. The levelized cost of energy (LCOE) of the system in scenarios 1 and 2 was estimated at 55.92 JPY/kWh and 56.47 JPY/kWh, respectively.

scholarly journals Experimental Data and Simulations of Performance and Thermal Comfort in a Typical Mediterranean House

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3311
Author(s):  
Víctor Pérez-Andreu ◽  
Carolina Aparicio-Fernández ◽  
José-Luis Vivancos ◽  
Javier Cárcel-Carrasco
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Demand ◽  
Natural Ventilation ◽  
Thermal Characterization ◽  
Energy Performance ◽  
Building Stock ◽  
Energy Demands ◽  
Dwelling House ◽  
Account Standard

The number of buildings renovated following the introduction of European energy-efficiency policy represents a small number of buildings in Spain. So, the main Spanish building stock needs an urgent energy renovation. Using passive strategies is essential, and thermal characterization and predictive tests of the energy-efficiency improvements achieving acceptable levels of comfort for their users are urgently necessary. This study analyzes the energy performance and thermal comfort of the users in a typical Mediterranean dwelling house. A transient simulation has been used to acquire the scope of Spanish standards for its energy rehabilitation, taking into account standard comfort conditions. The work is based on thermal monitoring of the building and a numerical validated model developed in TRNSYS. Energy demands for different models have been calculated considering different passive constructive measures combined with real wind site conditions and the behavior of users related to natural ventilation. This methodology has given us the necessary information to decide the best solution in relation to energy demand and facility of implementation. The thermal comfort for different models is not directly related to energy demand and has allowed checking when and where the measures need to be done.

scholarly journals Optimal Planning and Operation of a Residential Energy Community under Shared Electricity Incentives

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2045
Author(s):  
Pierpaolo Garavaso ◽  
Fabio Bignucolo ◽  
Jacopo Vivian ◽  
Giulia Alessio ◽  
Michele De Carli
Keyword(s):  
Renewable Energy ◽  
Power Distribution ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Distribution Networks ◽  
Building Envelope ◽  
Net Energy ◽  
Technical Equipment ◽  
Optimal Planning

Energy communities (ECs) are becoming increasingly common entities in power distribution networks. To promote local consumption of renewable energy sources, governments are supporting members of ECs with strong incentives on shared electricity. This policy encourages investments in the residential sector for building retrofit interventions and technical equipment renovations. In this paper, a general EC is modeled as an energy hub, which is deemed as a multi-energy system where different energy carriers are converted or stored to meet the building energy needs. Following the standardized matrix modeling approach, this paper introduces a novel methodology that aims at jointly identifying both optimal investments (planning) and optimal management strategies (operation) to supply the EC’s energy demand in the most convenient way under the current economic framework and policies. Optimal planning and operating results of five refurbishment cases for a real multi-family building are found and discussed, both in terms of overall cost and environmental impact. Simulation results verify that investing in building thermal efficiency leads to progressive electrification of end uses. It is demonstrated that the combination of improvements on building envelope thermal performances, photovoltaic (PV) generation, and heat pump results to be the most convenient refurbishment investment, allowing a 28% overall cost reduction compared to the benchmark scenario. Furthermore, incentives on shared electricity prove to stimulate higher renewable energy source (RES) penetration, reaching a significant reduction of emissions due to decreased net energy import.

scholarly journals Energy Performance Assessment of Innovative Building Solutions Coming from Construction and Demolition Waste Materials

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1226
Author(s):  
Beatriz Fraga-De Cal ◽  
Antonio Garrido-Marijuan ◽  
Olaia Eguiarte ◽  
Beñat Arregi ◽  
Ander Romero-Amorrortu ◽  
...  
Keyword(s):  
Thermal Insulation ◽  
Energy Demand ◽  
Energy Savings ◽  
Flow Analysis ◽  
Weather Conditions ◽  
Energy Performance ◽  
Construction And Demolition Waste ◽  
The European Union ◽  
Demolition Waste ◽  
The Impact

Prefabricated solutions incorporating thermal insulation are increasingly adopted as an energy conservation measure for building renovation. The InnoWEE European project developed three technologies from Construction and Demolition Waste (CDW) materials through a manufacturing process that supports the circular economy strategy of the European Union. Two of them consisted of geopolymer panels incorporated into an External Thermal Insulation Composite System (ETICS) and a ventilated façade. This study evaluates their thermal performance by means of monitoring data from three pilot case studies in Greece, Italy, and Romania, and calibrated building simulation models enabling the reliable prediction of energy savings in different climates and use scenarios. Results showed a reduction in energy demand for all demo buildings, with annual energy savings up to 25% after placing the novel insulation solutions. However, savings are highly dependent on weather conditions since the panels affect cooling and heating loads differently. Finally, a parametric assessment is performed to assess the impact of insulation thickness through an energy performance prediction and a cash flow analysis.

scholarly journals A Systematic Literature Review of Multi-Criteria Decision-Making Methods for Sustainable Selection of Insulation Materials in Buildings

2021 ◽  
Vol 13 (2) ◽  
pp. 737
Author(s):  
Indre Siksnelyte-Butkiene ◽  
Dalia Streimikiene ◽  
Tomas Balezentis ◽  
Virgilijus Skulskis
Keyword(s):  
Decision Making ◽  
Literature Review ◽  
Systematic Literature Review ◽  
Energy Demand ◽  
Energy Performance ◽  
Future Research ◽  
Multi Criteria Decision Making ◽  
Insulation Materials ◽  
Advantages And Disadvantages ◽  
Selection Of

The European Commission has recently adopted the Renovation Wave Strategy, aiming at the improvement of the energy performance of buildings. The strategy aims to at least double renovation rates in the next ten years and make sure that renovations lead to higher energy and resource efficiency. The choice of appropriate thermal insulation materials is one of the simplest and, at the same time, the most popular strategies that effectively reduce the energy demand of buildings. Today, the spectrum of insulation materials is quite wide, and each material has its own specific characteristics. It is recognized that the selection of materials is one of the most challenging and difficult steps of a building project. This paper aims to give an in-depth view of existing multi-criteria decision-making (MCDM) applications for the selection of insulation materials and to provide major insights in order to simplify the process of methods and criteria selection for future research. A systematic literature review is performed based on the Search, Appraisal, Synthesis and Analysis (SALSA) framework and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. In order to determine which MCDM method is the most appropriate for different questions, the main advantages and disadvantages of different methods are provided.

Sign in / Sign up

Export Citation Format

Share Document