scholarly journals Calculating the Inrush Current of Superconducting Transformers

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6714
Author(s):  
Grzegorz Komarzyniec

Under certain circumstances, after connecting a superconducting transformer to the power network, a high value current may flow through its windings. This current can exceed the critical value of the superconductor many times and cause the windings to lose their superconductive state. Loss of superconductive state of the windings may result in thermal interruption of their continuity as a result of conduction of a current of very high density. The mathematical relationships used to calculate the inrush current of conventional transformers do not work well for the calculation of superconducting transformers. This is due to the properties of superconducting materials used in the windings, first of all to the stepwise changes of the windings’ resistance when exiting the superconducting state and when returning to this state. The article presents the mathematical dependencies allowing to calculate the pulse waveforms of the inrush current of these transformers are derived. Basic electrical circuit sizes are used in the calculations, making the calculations quick and easy. Using the formulas, calculations of the inrush current of 8.5 kVA and 13.5 kVA superconducting transformers. The results were verified with the results of the inrush current measurements, achieving good compliance.

Author(s):  
J. Temple Black

Tool materials used in ultramicrotomy are glass, developed by Latta and Hartmann (1) and diamond, introduced by Fernandez-Moran (2). While diamonds produce more good sections per knife edge than glass, they are expensive; require careful mounting and handling; and are time consuming to clean before and after usage, purchase from vendors (3-6 months waiting time), and regrind. Glass offers an easily accessible, inexpensive material ($0.04 per knife) with very high compressive strength (3) that can be employed in microtomy of metals (4) as well as biological materials. When the orthogonal machining process is being studied, glass offers additional advantages. Sections of metal or plastic can be dried down on the rake face, coated with Au-Pd, and examined directly in the SEM with no additional handling (5). Figure 1 shows aluminum chips microtomed with a 75° glass knife at a cutting speed of 1 mm/sec with a depth of cut of 1000 Å lying on the rake face of the knife.


2017 ◽  
Vol 15 (6) ◽  
pp. 942-954 ◽  
Author(s):  
Parul Gulati ◽  
Moushumi Ghosh

Sphingomonas paucimobilis, an oligotroph, is well recognized for its potential for biofilm formation. The present study explored the biofilm forming ability of a strain isolated from municipal drinking water on plumbing materials. The intensity of biofilm formation of this strain on different plumbing materials was examined by using 1 × 1 cm2 pieces of six different pipe materials, i.e. polyvinyl chloride (PVC), polypropylene (PP), polyethylene (PE), aluminium (Al), copper (Cu) and rubber (R) and observing by staining with the chemical chromophore, Calcofluor. To understand whether biofilm formation occurs under flow through conditions, a laboratory-scale simulated distribution system, comprised of the above materials was fabricated. Biofilm samples were collected from the designed system at different biofilm ages (10, 40 and 90 hours old) and enumerated. The results indicated that the biofilm formation occurred on all plumbing materials with Cu and R as exceptions. The intensity of biofilm formation was found to be maximum on PVC followed by PP and PE. We also demonstrated the chemical chromophore (Calcofluor) successfully for rapid and easy visual detection of biofilms, validated by scanning electron microscope (SEM) analysis of the plumbing materials. Chlorination has little effect in preventing biofilm development.


2013 ◽  
Vol 22 (09) ◽  
pp. 1340001 ◽  
Author(s):  
JIUN-WEI HORNG ◽  
TO-YAO CHIU ◽  
CHING-PAO HSIAO ◽  
GUANG-TING HUANG

A current-mode universal biquadratic filter with three input terminals and one output terminal is presented. The architecture uses two current conveyors (CCs), two grounded capacitors and two grounded resistors; and can realize all standard second-order filter functions — highpass, bandpass, lowpass, notch and allpass. Moreover, the circuit still offers the following advantage features: very low active and passive sensitivities, using of grounded capacitors and resistors which is ideal for integrated circuit implementation, without requirements for critical component matching conditions and very high output impedance. The workability of the proposed circuit has been verified via HSPICE simulations using TSMC 0.18 μm, level 49 MOSFET technology.


2000 ◽  
Author(s):  
Sriram Chandrasekaran ◽  
Douglas K. Lindner ◽  
Don Leo

Abstract In this paper we study the closed loop power flow characteristics between a controlled piezoelectric actuator and a current controlled drive amplifier for two different structural control laws. We determine the real and reactive power flow through the structure and actuator into the amplifier when the structure is excited with a sinusoidal disturbance force under both control laws. The dependence of the real and reactive components of the power on the material properties of the actuator, structure and the configuration of the controller is presented. These real and reactive power estimates are useful for sizing the drive amplifier for the actuator.


1927 ◽  
Vol 5 (1) ◽  
pp. 66-88
Author(s):  
J. ARMITAGE ROBERTSON

The galvanotropic reactions of Polycelis nigra were investigated in constant and "intermittent" (that is, a current showing slight commutator ripple) electrical currents, varying in strength from one to about ten milliamperes. Galvanotropic reactions were most readily forthcoming at about 2 m.a. constant current, higher current strengths producing signs of discomfort or rigor, and intermittent current being slightly more effective in producing such disturbances than constant current. As a rule, Polycelis places itself longitudinally, with head facing the kathode, and moves thither by means of looping, its normal gliding motion being in abeyance. If facing the kathode on application of the current, it simply loops forward, but if moving parallel to the electrodes it turns its anterior end first, and then movesmore or less directly towards the kathode. If previously facing the anode, a turn in the direction of the kathode is usually accomplished only after more or less headwaving and apparent difficulty or hesitation. Decapitate animals, if facing the anode in the current, at some time or other almost invariably loop backwards to the kathode, tail foremost, for a varying number of times, before turning their anterior end to the kathode and orientating normally. This was never observed in normal animals. Decaudate animals behave like unmutilated individuals. Decapitate-and-decaudate Polycelis (middle-pieces) reactin the same manner as do decapitate specimens, i.e. show backward looping. Longitudinal halves of Polycelis are usually curved towards the injured side, and show little or no movement, either in or out of the current; it is supposed that this curvature is mechanical and the result of the injury. Higher amperages (above 2 m.a.) produce, progressively, cessation of forward movement with twisting and apparent discomfort, and, finally, flattening of the kathodic end of the body. This last reaction is often accompanied by various postures, presumably the result of arrested movement. An explanation of these reactions, in normal and unmutilated animals, is attempted, based on the supposed interaction of the experimental current with the external portion of an inherent electrical circuit. If this inherent circuit be obstructed it is suggested that the metabolic activities, with which it is apparently correlated, are to some extent upset. Further, that to avoid this derangement, and concomitant malaise, the animals orientate themselves so that the experimental current does not flow counter to the external portion of their inherent circuit; that the turning mechanism of the flanks which affects this orientation can be explained upon similar grounds; finally that backward looping can be explained as a transference of control or dominance to the tail end, due to the combined inhibitory action of mutilation and of a contrary experimental current upon the normal physiological gradients at the anterior end. A variety of points related to the theory, and some cases of galvanotropism bearing on the work, together with their theoretical explanations, are discussed.


Author(s):  
Toktar Belgibayev ◽  
Yury Shukrinov ◽  
Andrej Plecenik ◽  
Jiri Pechousek ◽  
Cestmir Burdik

Abstract We have investigated the dynamics of magnetization under a current pulse in a φ0 - junction with a direct coupling between the magnetic moment and the superconducting current. The correspondence between the magnetization value at the end of the pulse mz * and the realization of the magnetization reversal along the easy axis of the ferromagnetic is considered. The crucial influence of the ratio w of the ferromagnetic frequency to the characteristic frequency of the Josephson junction on the results of reversal predictions is demonstrated. Effect of w magnitude on the manifestation of periodicity bands in the mz * dependence on the model parameters is shown. There is a critical value of the Gilbert damping, above which the magnetization reversal is not realized. It is shown that at small w the magnitude mz * can be as a criterion of magnetization reversal. I.e., if mz * <0, the magnetization reversal would happen with 100 percent probability. The results can be used in various areas of superconducting spintronics, in particular, to create a memory element based on the Josephson $ {\varphi_0} $ junction


Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 47 ◽  
Author(s):  
Jan Lukas Storck ◽  
Timo Grothe ◽  
Al Mamun ◽  
Lilia Sabantina ◽  
Michaela Klöcker ◽  
...  

Electrospinning can be used to create nanofibers from diverse polymers in which also other materials can be embedded. Inclusion of magnetic nanoparticles, for example, results in preparation of magnetic nanofibers which are usually isotropically distributed on the substrate. One method to create a preferred direction is using a spinning cylinder as the substrate, which is not always possible, especially in commercial electrospinning machines. Here, another simple technique to partly align magnetic nanofibers is investigated. Since electrospinning works in a strong electric field and the fibers thus carry charges when landing on the substrate, using partly conductive substrates leads to a current flow through the conductive parts of the substrate which, according to Ampère’s right-hand grip rule, creates a magnetic field around it. We observed that this magnetic field, on the other hand, can partly align magnetic nanofibers perpendicular to the borders of the current flow conductor. We report on the first observations of electrospinning magnetic nanofibers on partly conductive substrates with some of the conductive areas additionally being grounded, resulting in partly oriented magnetic nanofibers.


A theory is developed of vortex nucleation by an ion moving in superfluid helium at a low temperature. It is shown that production of a vortex loop attached to the side of the ion becomes energetically possible when the velocity of the ion exceeds a critical value, but that nucleation is impeded by the presence of a small potential barrier. The predicted critical velocity is close to that observed experimentally, at least at high pressure. Nucleation of an encircling vortex ring, considered some years ago by Schwarz & Jang (Phys.Rev. A8,3199 (1973)), probably becomes possible only at a higher velocity, and it is impeded by a large potential barrier. It is shown that for vortex loops the potential barrier can probably be overcome at a rate consistent with experiment either by quantum tunnelling at the lowest temperatures or thermally, by absorption of a single roton, at higher temperatures. Possible explanations of the recent observation by Bowley et al . {Phil. Trans. R. Soc. Lond. A307, 201 (1982)) that at high pressure the rate of vortex nucleation falls off at very high velocities are discussed.


Author(s):  
Prakash B. V. S. Kota ◽  
Darren Hazlett ◽  
Les Perrin

Several roads, airfield pavements, and parking lots in Texas and other states in the western United States have suffered severe pavement damage due to expansive minerals formed from the reactions of calcium-based materials used to stabilize sulfate-bearing soils. Remediation costs for projects that suffer sulfate-induced heave damage are very high, because often the entire pavement may have to be removed and reconstructed. Observations from several projects are described to illustrate the phenomenon of sulfate-induced heave and the current methods to predict the problem. Two recent projects described include one using cement as a replacement for lime and a second using a double application of lime. The discussion also includes limitations of the present methods for determining the so-called soluble sulfate levels in soils. The practice of a double application of lime and several other alternative methods and their limitations are discussed. Although research has clearly identified the expansive minerals as being calcium bearing, no published investigations of non-calcium-based stabilizers that could effectively stabilize sulfate-bearing soils were found.


1892 ◽  
Vol 18 ◽  
pp. 318-319
Author(s):  
Cargill G. Knott

Part II. contains a continuation of former experiments on the twists produced in the magnetic metals when they are under the combined influence of circular and longitudinal magnetisations.It is established that a cobalt rod of rectangular section twists left-handedly when a current is passed along it in the direction of magnetisation. That is, cobalt behaves like nickel. Iron, on the other hand, twists right-handedly, until very high fields are employed. These results seem to have a close connection with the magnetic changes of length in these metals; for iron expands in moderate fields, while nickel and cobalt contract, the former always, and the latter till high fields are reached.


Sign in / Sign up

Export Citation Format

Share Document