scholarly journals Green Assessment of Imports and Exports of Wooden Forest Products Based on Forest Processing Industry: A Case Study of China

Forests ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 166
Author(s):  
Gang Tian ◽  
Wen Yu ◽  
Thi Thanh Huyen Vu ◽  
Guo-Yong Ma
Keyword(s):  
International Trade ◽  
Forest Products ◽  
Wood Pulp ◽  
Entropy Method ◽  
Assessment System ◽  
Assessment Model ◽  
Processing Industry ◽  
Pollution Treatment ◽  
Sawn Timber ◽  
Trade Competitiveness

The research on international trade competitiveness is progressing continuously. Environmental factors have been gradually considered in the competitiveness of international trade. However, the green assessment system of international trade competitiveness is not perfect. Building a model based on the trade economy is complex. This study combines environmental pollution data based on the forest processing industry with trade flows. Environmental trade competitiveness, pollution treatment, and trade scale were selected as the three criterion levels to construct an assessment system. The weight and score of each index were calculated by the overall entropy method. The overall entropy method is more comprehensive than the traditional entropy weight method due to introduce longitudinal comparisons of time and category. This method is a dynamic evaluation model with analysis of three-dimensional sequential data tables. The use of this method enables the assessment model to analyze more comprehensively the green level of a country’s trade in wooden forest products in terms of time and product category. The green level of chemical wood pulp and sawn timber trade in China is at a high level. The pollution treatment and trade scale of chemical wood pulp and sawn timber attained a medium level of matching. The trades in particle board, hardboard, newsprint, carton board, and wrapping paper are at medium levels of green. The trades in medium density fiberboard and plywood have poor levels of green and need to improve their green production capacity. It is suggested that China should increase investment in scientific research, as well as establish policies to restrict and treat pollution in the industry of wooden forest products, while increasing the export volumes of products with high added value. China should attach importance to the pollution resulting from the manufacture of wooden forest products. The state should support policies for these producers reducing production emissions.

scholarly journals THE BRAZILIAN INSERTION INTO THE INTERNATIONAL TRADE OF FOREST PRODUCTS CHAIN

2018 ◽  
Vol 41 (3) ◽  
Author(s):  
Henrique dos Santos Maxir ◽  
Liamara Santos Masullo
Keyword(s):  
International Trade ◽  
Comparative Advantage ◽  
Forest Products ◽  
Wood Pulp ◽  
Revealed Comparative Advantage ◽  
Fuel Wood ◽  
Wood Panels ◽  
The Matrix ◽  
Interindustry Analysis ◽  
Revealed Comparative Advantage Index

ABSTRACT The growing demand for forest products and the increasing interest worldwide in this market requires studying the behavior and defining Brazil’s role in relation to other competitive countries in the sector. This study analyzed the international trade in forest products from 2000 to 2014 emphasizing Brazil’s role. The Revealed Comparative Advantage index (RCA) and Revealed Comparative Disadvantage index (RCD) were analyzed based on the matrix of the symmetric Aquino index, also through the intra-industry and interindustry analysis using the Grubel-Lloyd index. Brazil shows RCA in fuel wood, wood panels, wood floors and wood articles as well as wood pulp. Brazil imports relatively small amounts of wood; nevertheless, it still has relatively high dependence on paper importations.

scholarly journals Evaluation and Analysis of CFI Schemes with Different Length of Displaced Left-Turn Lanes with Entropy Method

2021 ◽  
Vol 13 (12) ◽  
pp. 6917
Author(s):  
Binghong Pan ◽  
Shasha Luo ◽  
Jinfeng Ying ◽  
Yang Shao ◽  
Shangru Liu ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Heavy Traffic ◽  
Efficiency Index ◽  
Entropy Method ◽  
Sustainable Transportation ◽  
Assessment Model ◽  
Left Turn ◽  
Traffic Demand ◽  
Traffic Efficiency ◽  
Multi Attribute Decision Making

As an unconventional design to alleviate the conflict between left-turn and through vehicles, Continuous Flow Intersection (CFI) has obvious advantages in improving the sustainability of roadway. So far, the design manuals and guidelines for CFI are not enough sufficient, especially for the displaced left-turn lane length of CFI. And the results of existing research studies are not operational, making it difficult to put CFI into application. To address this issue, this paper presents a methodological procedure for determination and evaluation of displaced left-turn lane length based on the entropy method considering multiple performance measures for sustainable transportation, including traffic efficiency index, environment effect index and fuel consumption. VISSIM and the surrogate safety assessment model (SSAM) were used to simulate the operational and safety performance of CFI. The multi-attribute decision-making method (MADM) based on an entropy method was adopted to determine the suitability of the CFI schemes under different traffic demand patterns. Finally, the procedure was applied to a typical congested intersection of the arterial road with heavy traffic volume and high left-turn ratio in Xi’an, China, the results showed the methodological procedure is reasonable and practical. According to the results, for the studied intersection, when the Volume-to-Capacity ratio (V/C) in the westbound and eastbound lanes is less than 0.5, the length of the displaced left-turn lanes can be selected in the range of 80 to 170 m. Otherwise, other solutions should be considered to improve the traffic efficiency. The simulation results of the case showed CFI can significantly improve the traffic efficiency. In the best case, compared with the conventional intersection, the number of vehicles increases by 13%, delay, travel time, number of stops, CO emission, and fuel consumption decrease by 41%, 29%, 25%, 17%, and 17%, respectively.

scholarly journals A Case Study of Flood Risk Evaluation Based on Emergy Theory and Cloud Model in Anyang Region, China

Water ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 420
Author(s):  
Zening Wu ◽  
Yuhai Cui ◽  
Yuan Guo
Keyword(s):  
Risk Assessment ◽  
Flood Risk ◽  
Flood Control ◽  
Flood Hazard ◽  
Cloud Model ◽  
Flood Disaster ◽  
Assessment System ◽  
Assessment Model ◽  
Flood Risk Assessment ◽  
Emergy Theory

With the progression of climate change, the intensity and frequency of extreme rainfall have increased in many parts of the world, while the continuous acceleration of urbanization has made cities more vulnerable to floods. In order to effectively estimate and assess the risks brought by flood disasters, this paper proposes a regional flood disaster risk assessment model combining emergy theory and the cloud model. The emergy theory can measure many kinds of hazardous factor and convert them into unified solar emergy (sej) for quantification. The cloud model can transform the uncertainty in flood risk assessment into certainty in an appropriate way, making the urban flood risk assessment more accurate and effective. In this study, the flood risk assessment model combines the advantages of the two research methods to establish a natural and social dual flood risk assessment system. Based on this, the risk assessment system of the flood hazard cloud model is established. This model was used in a flood disaster risk assessment, and the risk level was divided into five levels: very low risk, low risk, medium risk, high risk, and very high risk. Flood hazard risk results were obtained by using the entropy weight method and fuzzy transformation method. As an example for the application of this model, this paper focuses on the Anyang region which has a typical continental monsoon climate. The results show that the Anyang region has a serious flood disaster threat. Within this region, Linzhou County and Anyang County have very high levels of risk for flood disaster, while Hua County, Neihuang County, Wenfeng District and Beiguan District have high levels of risk for flood disaster. These areas are the core urban areas and the economic center of local administrative regions, with 70% of the industrial clusters being situated in these regions. Only with the coordinated development of regional flood control planning, economy, and population, and reductions in the uncertainty of existing flood control and drainage facilities can the sustainable, healthy and stable development of the region be maintained.

scholarly journals Trade competitiveness and export performance of Indian cardamom

1970 ◽  
pp. 34-42
Author(s):  
L Thomas, P Rajeev, P C Sanil
Keyword(s):  
International Trade ◽  
Export Performance ◽  
Secondary Data ◽  
Export Markets ◽  
Trade Data ◽  
The Past ◽  
Export Competitiveness ◽  
Trade Competitiveness ◽  
And Performance ◽  
Research Investments

India is one of the major producers and consumer of cardamom. The export performance of cardamom has witnessed several changes over the past few decades. This paper analyses the trends and performance of cardamom commodity from India. Using secondary data from the Spices Board and the Ministry of Commerce along with international trade data from the United Nations International Trade Statistics Database, the trend in the domestic production and export markets is clearly drawn out. The changes in Revealed Comparative Advantage in cardamom exports over the years is used to study the level and changes in the export competitiveness of the commodity. The study identifies a revival in export competiveness in the recent years along with an increase in the share of global cardamom exports. The highly concentrated production of cardamom, the preference for Indian cardamom in Middle East economies and the revival of export competitiveness can benefit the Indian cardamom producers. The study argues for strengthening research investments in cardamom for sustaining and enhancing the benefits from cardamom exports from the country.

scholarly journals Export Competitiveness Analysis of Creative Industries in the European Union

2020 ◽  
Vol 17 (1) ◽  
pp. 28-37
Author(s):  
Deimantė Krisiukėnienė ◽  
Vaida Pilinkienė
Keyword(s):  
International Trade ◽  
Comparative Advantage ◽  
Theoretical Background ◽  
Creative Industries ◽  
Research Purpose ◽  
The European Union ◽  
Revealed Comparative Advantage ◽  
Data Set ◽  
Trade Competitiveness ◽  
The Eu

AbstractResearch purpose. The research purpose is to assess and compare the competitiveness of the EU creative industries’ export.Design/Methodology/Approach. The article is organised as follows: Section 1 presents a short theoretical conception of creative industries; Section 2 presents the theoretical background of trade competitiveness indices; Section 3 introduces the research data set, method and variables; Section 4 discusses the results of the revealed comparative advantage index analysis; and the final section presents the conclusions of the research. It should be noted that the research does not cover all possible factors underlying the differences in the external sector performance and thus may need to be complemented with country-specific analysis as warranted. Methods of the research include theoretical review and analysis, evaluation of comparative advantage indices and clustering.Findings. The analysis revealed that the EU countries may gain competitiveness because of the globalisation effects and the development of creative industries. The increase in the revealed comparative advantage (RCA) index during the period 2004–2017 shows rising EU international trade specialisation in creative industries. According to dynamic RCA index results, France, Poland, Slovakia, Slovenia and Spain has competitive advantage in creative industries sectors and could be specified as ‘rising stars’ according to dynamic of their export.Originality/Value/Practical implications. A creative industries analysis is becoming increasingly relevant in scientific research. Fast globalisation growth affects the processes in which closed economies together with their specific sectors are no longer competitive in the market because productivity of countries as well as particular economic sectors depends on international trade liberalisation, technology and innovation. Scientific literature, nevertheless, contains a gap in the area of international trade competitiveness research in creative industries sector.

scholarly journals Effect of Freight Transport Service Performance on Global Market Competitiveness

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Eyakem Fikru
Keyword(s):  
International Trade ◽  
Performance Index ◽  
Freight Transport ◽  
Global Market ◽  
Service Performance ◽  
Research Approach ◽  
Transport Service ◽  
Market Competitiveness ◽  
Trade Competitiveness ◽  
The Right

The producers, intermediaries, shippers, and consignees, located often thousands of miles distant from each other, require efficient transport and logistics services to get the right product with the right quality and quantity to the right place within the right time and above all at a right price. The main objective of this study was to assess the effect of freight transport service performance on international trade competitiveness. A descriptive research design was used. Secondary data were collected from international organizations' policy, standards documents, and annual report of the year 2018 by using the Logistic Performance Index rank. Moreover, a quantitative research approach was applied. The data were entered, manipulated, organized, and analyzed using Excel and Statistical Package for Social Science. Both descriptive and inferential analyses were used to identify and examine the extent of international trade competitiveness and its implication in the global market. As the result reviled the entire logistic performance factors such as Growth Domestic Product, Distance, Infrastructure, Landlocked, and Timelines were found to be significantly important to determine the global market competitiveness. But, the geographical distance between bilateral countries affected a country’s trade negatively. The top 10 higher Logistic Performance Index scores more competitive and better implementer of the effects of freight transport factors; whereas, the bottom scorers had an ineffective market link with their partners.

International Trade In Forest Products

2003 ◽  
pp. 177-199 ◽  
Author(s):  
Jeffrey P. Prestemon ◽  
Joseph Buongiorno ◽  
David N. Wear ◽  
Jacek P. Siry
Keyword(s):  
International Trade ◽  
Forest Products

International trade in forest products: lumber trade disputes, models and examples

2021 ◽  
Keyword(s):  
United States ◽  
International Trade ◽  
Forest Products ◽  
The United States ◽  
Wood Products ◽  
Forest Sector ◽  
Softwood Lumber ◽  
Background Theory ◽  
The North ◽  
The Impact

Abstract Because of the long-standing Canada-United States lumber trade dispute and the current pressure on the world's forests as a renewable energy source, much attention has been directed toward the modelling of international trade in wood products. Two types of trade models are described in this book: one is rooted in economic theory and mathematical programming, and the other consists of two econometric/statistical models--a gravity model rooted in theory and an approach known as GVAR that relies on time series analyses. The purpose of the book is to provide the background theory behind models and enable readers to easily construct their own models to analyze policy questions, whether in forestry or another sector. Examples in the book illustrate how models can be used to say something about a variety of issues, including identification of the gains and losses to various players in the North American softwood lumber business, and the potential for redirecting sales of lumber to countries outside the United States. The discussion is expanded to include other products besides lumber, and used to examine, for example, the effects of log export restrictions by one naton on all other forestry jurisdictions, the impacts of climate policies as they relate to the global forest sector, and the impact of oil prices on forest product markets throughout the world.

Research on Risk Assessment Method and System Development of Small Ammonia Refrigeration Units

2019 ◽  
Author(s):  
Xiang Li ◽  
Weihua Wang ◽  
Weike Jing ◽  
Jin Shi ◽  
Fakun Zhuang
Keyword(s):  
Risk Assessment ◽  
Evaluation Method ◽  
System Development ◽  
Correction Method ◽  
Assessment Method ◽  
Scientific Basis ◽  
Assessment System ◽  
Assessment Model ◽  
Mitigation Measures ◽  
Risk Assessment Method

Abstract In recent years, ammonia leakage accidents occur frequently, which causes a great concern in China. Based on traditional risk analysis methods and the equipment characteristics, a risk evaluation method for small ammonia refrigeration units is proposed. The method includes a risk assessment model based on area division, a failure probability assessment method based on expert scoring system, a failure consequence assessment method based on regional population density and consequence mitigation measures, and a HAZOP risk correction method. Based on the proposed method, a risk assessment system of small ammonia refrigeration units is developed. This risk assessment method and system will provide a scientific basis to carry out the cold storage management in China.

Sign in / Sign up

Export Citation Format

Share Document