scholarly journals Repeated Heat Regeneration of Bone Char for Sustainable Use in Fluoride Removal from Drinking Water

Healthcare ◽  
2018 ◽  
Vol 6 (4) ◽  
pp. 143 ◽  
Author(s):  
H. Herath ◽  
Tomonori Kawakami ◽  
Masamoto Tafu
Keyword(s):  
Adsorption Capacity ◽  
Low Cost ◽  
Sustainable Use ◽  
Chemical Precipitation ◽  
Fluoride Removal ◽  
Bone Char ◽  
Fluoride Adsorption ◽  
Heat Regeneration ◽  
Recovery Percentage ◽  
Regeneration Of Bone

The effectiveness of regenerated chicken bone char (CBC) in fluoride removal was investigated in the present study. Heat treatment was studied as the regeneration method. Results revealed that the CBC regenerated at 673 K yielded the highest fluoride adsorption capacity, hence, 673 K was the best regenerating temperature. The study continued up to five regeneration cycles at the best regenerating temperature; 673 K. The CBC accounted to 16.1 mg F/g CBC as the total adsorption capacity after five regeneration cycles. The recovery percentage of CBC reduced from 79% at the first regeneration to 4% after five regeneration cycles. The hydroxyapatite structure of CBC was not changed during the fluoride adsorption by five regeneration cycles. The ion exchange incorporated with the chemical precipitation occurred during the fluoride adsorption. The repeated regeneration of CBC is possible and it could be used as a low cost defluoridation technique to minimize the wastage of bone char.

scholarly journals Adsorption of fluoride from industrial wastewater using polymer adsorbents: a review

2021 ◽  
Vol 945 (1) ◽  
pp. 012068
Author(s):  
Chee Yung Pang ◽  
Gulnaziya Issabayeva ◽  
Chen Hwa Low ◽  
Mee Chu Wong
Keyword(s):  
Adsorption Capacity ◽  
Industrial Wastewater ◽  
Membrane Filtration ◽  
Chemical Precipitation ◽  
Fluoride Removal ◽  
High Adsorption ◽  
Polymeric Adsorbents ◽  
Fluoride Adsorption ◽  
High Adsorption Capacity ◽  
Removal Technologies

Abstract Fluoride pollution in ground and surface water originates from naturally occurring reactions and industrial activities such as the disposal of industrial wastewater. Amongst different fluoride removal technologies including chemical precipitation, membrane filtration, ion exchange processes, and electrodialysis, adsorption is an attractive method for fluoride removal from wastewater due to its low operational cost, simplicity, and good sustainability. Various adsorbents are used for fluoride removal including, metal oxides and hydroxide, carbonaceous adsorbents, zeolite, polysaccharides, and polyresin adsorbents. This review studies the application of modified polysaccharides and polyresin adsorbents for the removal of fluoride from wastewater. The relationship between the adsorption conditions and the resulting adsorption capacity is thoroughly discussed. Based on the reported studies, modified polysaccharides and polyresins adsorbents can effectively remove fluoride from wastewater achieving high adsorption capacity, the highest being 92.39 mg/g for aluminum impregnated amberlite at pH 3. Furthermore, aluminum impregnated adsorbents reported a higher fluoride adsorption capacity than other modification methods where the three adsorbents with the highest fluoride adsorption capacity are: aluminum impregnated amberlite 92.39 mg/g at pH 3> zirconium immobilized crossed linked chitosan 48.26 mg/g at pH 6 > chitosan/aluminum hydroxide beads 17.68 mg/g at pH 4. In addition, polymeric adsorbents are also highly sustainable as they can be regenerated multiple times to be reused. Therefore, the high adsorption capacity and good regeneration potential allow polymeric adsorbents to serve as promising and sustainable adsorbents to remove fluoride from industrial wastewater.

Chemically activated cow bone for increased fluoride removal from drinking water

2016 ◽  
Vol 6 (2) ◽  
pp. 215-223 ◽  
Author(s):  
Teshome L. Yami ◽  
Elizabeth C. Butler ◽  
David A. Sabatini
Keyword(s):  
Drinking Water ◽  
Adsorption Capacity ◽  
Thermal Activation ◽  
Chemical Activation ◽  
Unit Mass ◽  
Fluoride Removal ◽  
Bone Char ◽  
Fluoride Adsorption ◽  
Removal Capacity ◽  
Cow Bone

Thermally activated cow bone is widely utilized for treating fluoride impacted drinking water to meet the World Health Organization guideline value of 1.5 mg/L. However, the fluoride removal capacity of bone char is low, leaving room for further improvement. This study, therefore, strives to improve the fluoride adsorption capacity of cow bone by using chemical activation in place of thermal activation. Chemically activated cow bones (CABs) had, on average, a four-fold higher fluoride adsorption capacity than bone char. Characterization of the most effective CAB were made to explore potential reasons for the increased fluoride adsorption capacity. The X-ray diffraction pattern of the CAB showed formation of bassanite and monetite minerals which may be responsible for the higher fluoride adsorption capacity. Chemical activation is also a lower-cost production process than the thermal activation of cow bone. Further, a higher mass of media was recovered per unit mass of starting material during chemical activation. Therefore, this research shows that increased fluoride removal capacity can be achieved with chemical activation of cow bone while reducing activation costs and greatly increasing product yield per unit mass of starting material, all of which support further evaluation and field testing of this material.

scholarly journals Bone char from an invasive aquatic species "devilfish" as a sustainable adsorbent for the removal of fluoride in water for human consumption

2021 ◽  
Author(s):  
Sergio Armando Cruz-Briano ◽  
Nahum Andrés Medellín-Castillo ◽  
Arturo Torres-Dosal ◽  
Roberto Leyva-Ramos ◽  
Juan Carlos Moreno-Piraján ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Rural Community ◽  
Management Strategy ◽  
Dental Fluorosis ◽  
Low Cost ◽  
Human Consumption ◽  
Bone Char ◽  
Fluoride Adsorption ◽  
Desorption Study ◽  
Treatment Technologies

Abstract In this study, bone chars were obtained from an alien acuatic species “devilfish” bones by pyrolysis of 500–800°C. Bone chars were evaluated as a sustainable adsorbent of fluoride, it was found pyrolysed bone char at 500°C adsorbed the most amount of fluoride. The effect of pH indicated that the adsorption capacity increased as the pH decreased. Thermodynamic parameters of fluoride adsorption on devilfish bone chars were estimated as ΔH°= 7.213 kJ mol− 1, ΔG°= 23.61 kJ mol− 1 and ΔS° = 103.4 J mol− 1 K− 1 indicating that adsorption is endothermic, spontaneous and with great affinity of fluoride on bone char from devilfish. The fluoride desorption study showed that fluoride is desorbed from the material of 0.24 to 20.06 %, so the adsorption is considered to be partly reversible. The regeneration of the bone char at 400, 500 and 600°C was studied and it was noted that its adsorption capacity decreases slightly so it could be considered appropriate for the use in water treatment technologies. Adsorption of fluorides from drinking well water of a rural community with dental fluorosis problems and high levels of fluoride in water, revealed that by increasing the amount of the bone char of 0.05 to 0.8 g, the disposal of fluoride increases from 69.1 to 98.7 %. Lastly, it was established that the bone char synthesized from devilfish is a low-cost, viable a sustainable material to remove fluorides from water and represents an environmental management strategy of this alien species.

scholarly journals Eggshell Powder as an Adsorbent for Removal of Fluoride from Aqueous Solution: Equilibrium, Kinetic and Thermodynamic Studies

2012 ◽  
Vol 9 (3) ◽  
pp. 1457-1480 ◽  
Author(s):  
R. Bhaumik ◽  
N. K. Mondal ◽  
B. Das ◽  
P. Roy ◽  
K. C. Pal ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Fluoride Removal ◽  
Contaminated Water ◽  
Fluoride Adsorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies ◽  
Maximum Removal

A new medium, eggshell powder has been developed for fluoride removal from aqueous solution. Fluoride adsorption was studied in a batch system where adsorption was found to be pH dependent with maximum removal efficiency at 6.0. The experimental data was more satisfactorily fitted with Langmuir isotherm model. The kinetics and the factor controlling adsorption process fully accepted by pseudo-second-order model were also discussed. Eawas found to be 45.98 kJmol-1by using Arrhenius equation, indicating chemisorption nature of fluoride onto eggshell powder. Thermodynamic study showed spontaneous nature and feasibility of the adsorption process with negative enthalpy (∆H0) value also supported the exothermic nature. Batch experiments were performed to study the applicability of the adsorbent by using fluoride contaminated water collected from affected areas. These results indicate that eggshell powder can be used as an effective, low-cost adsorbent to remove fluoride from aqueous solution as well as groundwater.

Fluoride removal from drinking water in Senegal: laboratory and pilot experimentation on bone char-based treatment

2011 ◽  
Vol 1 (4) ◽  
pp. 213-223 ◽  
Author(s):  
Sabrina Sorlini ◽  
Daniela Palazzini ◽  
Carlo Collivignarelli
Keyword(s):  
Drinking Water ◽  
Dental Fluorosis ◽  
Low Cost ◽  
Fluoride Concentration ◽  
Pilot Scale ◽  
Appropriate Technology ◽  
World Health ◽  
Fluoride Removal ◽  
Process Conditions ◽  
Bone Char

In Senegal there are four regions where fluoride concentration in drinking water exceeds the World Health Organization guide value of 1.5 mg/L. This generates permanent damages to the teeth (dental fluorosis) and to the skeleton (skeletal fluorosis). A safe, efficient, simple and low-cost effective defluoridation technique is not available yet and needs to be developed in order to prevent the occurrence of fluorosis. This experimental research was carried out in order to define an appropriate technology for fluoride removal from groundwater in Senegal. Batch tests and filtration tests at laboratory and pilot scale were carried out using animal bone char as adsorbent material for fluoride removal. Possible influencing parameters, such as specific ions in Senegalese drinking water, were investigated and the best process conditions were defined for the application in Senegal. The results attest to the efficacy of bone char in removing fluoride from Senegalese water: at pilot scale the mean specific adsorption was 2.7 mg F−/g of bone char, corresponding to a total treated volume of 4,000 L and a filter life of nearly three months.

scholarly journals Mg-Al Mixed Oxide Adsorbent Synthesized Using FCT Template for Fluoride Removal from Drinking Water

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Jifa Liu ◽  
Ping Zhao ◽  
Yue Xu ◽  
Xibin Jia
Keyword(s):  
Drinking Water ◽  
Adsorption Capacity ◽  
Mixed Oxide ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Molar Ratio ◽  
Fluoride Removal ◽  
Hydroxyl Groups ◽  
X Ray ◽  
Fluoride Adsorption

To make full use of natural waste, a novel Mg-Al mixed oxide adsorbent was synthesized by the dip-calcination method using the fluff of the chinar tree (FCT) and an Mg(II) and Al(III) chloride solution as raw materials. The adsorbents were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The effects of the Mg/Al molar ratio and calcination temperature on the performance of the novel Mg-Al mixed oxide adsorbent were investigated. The optimized Mg-Al mixed oxide adsorbent had a Langmuir adsorption capacity of 53 mg/g. This adsorption capacity was higher than that of the separate Mg oxide and Al oxide. The synergy between Mg and Al is beneficial to the adsorption performance of the material. The fluoride adsorption capacity of the optimized Mg-Al mixed oxide adsorbent is only slightly affected by ions such as Cl−, NO3−, SO42−, Na+, and K+and is excellent for use in recycling and real water. The hydroxyl groups on the surface of the Mg-Al mixed oxide adsorbent play a key role in the adsorption of fluorine. The as-obtained novel Mg-Al mixed oxide adsorbent is an efficient and environmentally friendly agent for fluoride removal from drinking water.

scholarly journals Adsorption of Fluoride Ion onto Zirconyl-Impregnated Activated Carbon Prepared from Lapsi Seed Stone

2013 ◽  
Vol 30 ◽  
pp. 13-23 ◽  
Author(s):  
Sahira Joshi ◽  
Mandira Adhikari ◽  
Raja Ram Pradhananga
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Zinc Chloride ◽  
Contact Time ◽  
Activated Carbons ◽  
Low Cost ◽  
Chemical Society ◽  
Nitrogen Atmosphere ◽  
Batch Mode ◽  
Fluoride Adsorption

The potentials of activated carbon derived from Lapsi (Choerospondias axillaries) seed stone after impregnation with zirconium for adsorptive removal of fluoride is presented. Activated carbons from Lapsi seed stone were prepared by three different techniques. Firstly by directly burning in limited supply of air, secondly by treating with a mixture of conc. H2SO4 and HNO3 (in the ratio of 1:1 by weight) and thirdly by activation with zinc chloride (in the ratio of 1:1 by weight) followed by carbonization at 400°C and 500°C under nitrogen atmosphere. Thus prepared carbons were impregnated with zirconyl oxychloride and effects of pH, adsorbent dose, and contact time and adsorbate concentration for the removal of fluoride were evaluated by batch mode. The optimum pH for adsorption of fluoride was observed at pH 3-4, and a minimum contact time for the maximum defluoridation was found to be 180 min. The Langmuir and Freundlich isotherms were used to describe adsorption equilibrium. Zirconium impregnation increased the fluoride adsorption capacity of carbon to considerable extent. Among carbon prepared by three different techniques, the carbon prepared from zinc chloride activation followed by carbonization showed relatively higher fluoride adsorption capacity. From the experiment it is concluded that activated carbon prepared from Lapsi seed is an efficient, low-cost alternative to commercial activated carbon for defluoridation of water.DOI: http://dx.doi.org/10.3126/jncs.v30i0.9330Journal of Nepal Chemical Society Vol. 30, 2012 Page:  13-23 Uploaded date: 12/16/2013    

Granulation of Fe-Al-Ce nano-adsorbent for fluoride removal from drinking water using inorganic binder

2013 ◽  
Vol 13 (5) ◽  
pp. 1309-1316 ◽  
Author(s):  
Chao-Li Su ◽  
Lin Chen ◽  
Ting-Jie Wang ◽  
Li-Xin Yu ◽  
Yong Jin
Keyword(s):  
Adsorption Capacity ◽  
Active Sites ◽  
Organic Binder ◽  
Hydroxyl Group ◽  
Fluoride Removal ◽  
Great Loss ◽  
Fluoride Adsorption ◽  
High Fluoride ◽  
Nano Adsorbent ◽  
Extrusion Method

Nano-adsorbents usually have high fluoride adsorption capacity. However, they cannot be used in packed beds because of their low hydraulic conductivity. Granulation with organic binder usually causes a great loss of adsorption capacity due to the active sites of the adsorbent being extensively occupied by the organic binder. Using inorganic sol as a binder is expected to have a potential for reducing the loss of adsorption capacity. In this paper, aluminium, zirconium, titanium and silica sol were employed as binders for Fe-Al-Ce nano-adsorbent granulation. The nano-adsorbent was mixed with sol and dried to form lumps, then calcinated and ground into powder. The morphology, adsorption capacity and structure of the compound powder were analysed. As an optimization, aluminium sol was selected as a binder in the granulation of Fe-Al-Ce nano-adsorbent using extrusion method. The effects of sol on the adsorbent and the granule structure were characterized. The granules showed a high adsorption capacity, reaching over 90% capacity of Fe-Al-Ce nano-adsorbent, much higher than that of using acrylic-styrene copolymer latex as a binder in our previous research. It is inferred that aluminium sol is a suitable binder which does no damage to the active hydroxyl group of Fe-Al-Ce adsorbent.

scholarly journals Synthesis of a Novel Ce-bpdc for the Effective Removal of Fluoride from Aqueous Solution

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Changqing Zhao ◽  
Yanwei Cui ◽  
Fang Fang ◽  
Si Ok Ryu ◽  
Jiarui Huang
Keyword(s):  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Photoelectron Spectroscopy ◽  
Ph Value ◽  
Binding Capacity ◽  
Fluoride Removal ◽  
Maximum Adsorption Capacity ◽  
Fluoride Ions ◽  
X Ray ◽  
Fluoride Adsorption

Ce-1,1′-biphenyl-4,4′-dicarboxylic acid (Ce-bpdc), a novel type of metal organic framework, was synthesized and applied to remove excessive fluoride from water. The structure and morphology of Ce-bpdc were measured by X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The effects, such as saturated adsorption capacity, HCO3-, and pH, were investigated. The optimal pH value for fluoride adsorption was the range from 5 to 6. The coexisting bicarbonate anions have a little influence on fluoride removal. The fluoride adsorption over the Ce-bpdc adsorbent could reach its equilibrium in about 20 min. The Ce-bpdc coordination complex exhibited high binding capacity for fluoride ions. The maximum adsorption capacity calculated from Langmuir model was high up to 45.5 mg/g at 298 K (pH = 7.0) and the removal efficiency was greater than 80%. In order to investigate the mechanism of fluoride removal, various adsorption isotherms such as Langmuir and Freundlich were fitted. The experimental data revealed that the Langmuir isotherm gave a more satisfactory fit for fluoride removal. Finally, the tested results of ground water samples from three places, Yuefang, Jiangji, and Sanyi which exhibited high removal efficiency, also demonstrate the potential utility of the Ce-bpdc as an effective adsorbent.

Sign in / Sign up

Export Citation Format

Share Document