scholarly journals Lignin: A Biopolymer from Forestry Biomass for Biocomposites and 3D Printing

Materials ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3006 ◽  
Author(s):  
Mihaela Tanase-Opedal ◽  
Eduardo Espinosa ◽  
Alejandro Rodríguez ◽  
Gary Chinga-Carrasco
Keyword(s):  
3D Printing ◽  
Radical Scavenging Activity ◽  
Matrix Material ◽  
Thermo Gravimetric Analysis ◽  
Radical Scavenging ◽  
Fused Deposition Modelling ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Biobased Materials ◽  
Fused Deposition

Biopolymers from forestry biomass are promising for the sustainable development of new biobased materials. As such, lignin and fiber-based biocomposites are plausible renewable alternatives to petrochemical-based products. In this study, we have obtained lignin from Spruce biomass through a soda pulping process. The lignin was used for manufacturing biocomposite filaments containing 20% and 40% lignin and using polylactic acid (PLA) as matrix material. Dogbones for mechanical testing were 3D printed by fused deposition modelling. The lignin and the corresponding biocomposites were characterized in detail, including thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction analysis (XRD), antioxidant capacity, mechanical properties, and scanning electron microscopy (SEM). Although lignin led to a reduction of the tensile strength and modulus, the reduction could be counteracted to some extent by adjusting the 3D printing temperature. The results showed that lignin acted as a nucleating agent and thus led to further crystallization of PLA. The radical scavenging activity of the biocomposites increased to roughly 50% antioxidant potential/cm2, for the biocomposite containing 40 wt % lignin. The results demonstrate the potential of lignin as a component in biocomposite materials, which we show are adequate for 3D printing operations.

Fabrication of modified-release custom-designed ciprofloxacin tablets via fused deposition modeling 3D printing

2020 ◽  
Vol 4 (1) ◽  
pp. 17-27
Author(s):  
Nasir Abbas ◽  
Nadia Qamar ◽  
Amjad Hussain ◽  
Sumera Latif ◽  
Muhammad Sohail Arshad ◽  
...  
Keyword(s):  
3D Printing ◽  
Drug Release ◽  
Fused Deposition Modeling ◽  
Structural Characteristics ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Ciprofloxacin Hydrochloride ◽  
Fused Deposition ◽  
Degradation Temperature

Aim: The aim of the present work was to fabricate customized tablets of ciprofloxacin hydrochloride through 3D printing for optimized dosing. Materials & methods: A hot melt extrusion technique was employed to produce polyvinyl alcohol filaments with differing strengths of ciprofloxacin hydrochloride. Drug-loaded filaments were characterized for mechanical strength, thermal behavior and structural characteristics prior to printing of tablets by varying the infill percentage. Final formulations were evaluated for drug release profiles. Results: The prepared formulations contained 15–20% drug. The drug release patterns of different formulations were found to be reliant on infill percentage. Differential scanning calorimetry and thermo-gravimetric analysis confirmed that degradation temperature of drug is way above the printing temperature. Conclusion: This work is potentially significant for optimized antibiotic dosing, which in turn leads to enhanced clinical outcome.

scholarly journals Enhancement of Antioxidant and Hydrophobic Properties of Alginate via Aromatic Derivatization: Preparation, Characterization, and Evaluation

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2575
Author(s):  
Smaher M. Elbayomi ◽  
Haili Wang ◽  
Tamer M. Tamer ◽  
Yezi You
Keyword(s):  
Radical Scavenging Activity ◽  
Radical Scavenging ◽  
Hydroxyl Group ◽  
Hydroxyl Groups ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Benzoyl Group ◽  
Antioxidant Evaluation ◽  
Thermo Stability

The preparation of bioactive polymeric molecules requires the attention of scientists as it has a potential function in biomedical applications. In the current study, functional substitution of alginate with a benzoyl group was prepared via coupling its hydroxyl group with benzoyl chloride. Fourier transform infrared spectroscopy indicated the characteristic peaks of aromatic C=C in alginate derivative at 1431 cm−1. HNMR analysis demonstrated the aromatic protons at 7.5 ppm assigned to benzoyl groups attached to alginate hydroxyl groups. Wetting analysis showed a decrease in hydrophilicity in the new alginate derivative. Differential scanning calorimetry and thermal gravimetric analysis showed that the designed aromatic alginate derivative demonstrated higher thermo-stability than alginates. The aromatic alginate derivative displayed high anti-inflammatory properties compared to alginate. Finally, the in vitro antioxidant evaluation of the aromatic alginate derivative showed a significant increase in free radical scavenging activity compared to neat alginate against DPPH (2,2-diphenyll-picrylhydrazyl) and ABTS free radicals. The obtained results proposed that the new alginate derivative could be employed for gene and drug delivery applications.

scholarly journals Biocomposites of Bio-Polyethylene Reinforced with a Hydrothermal-Alkaline Sugarcane Bagasse Pulp and Coupled with a Bio-Based Compatibilizer

Molecules ◽  
2020 ◽  
Vol 25 (9) ◽  
pp. 2158
Author(s):  
Nanci Vanesa Ehman ◽  
Diana Ita-Nagy ◽  
Fernando Esteban Felissia ◽  
María Evangelina Vallejos ◽  
Isabel Quispe ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Water Absorption ◽  
Sugarcane Bagasse ◽  
Thermo Gravimetric Analysis ◽  
Decomposition Temperature ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Cradle To Gate ◽  
Bagasse Pulp

Bio-polyethylene (BioPE, derived from sugarcane), sugarcane bagasse pulp, and two compatibilizers (fossil and bio-based), were used to manufacture biocomposite filaments for 3D printing. Biocomposite filaments were manufactured and characterized in detail, including measurement of water absorption, mechanical properties, thermal stability and decomposition temperature (thermo-gravimetric analysis (TGA)). Differential scanning calorimetry (DSC) was performed to measure the glass transition temperature (Tg). Scanning electron microscopy (SEM) was applied to assess the fracture area of the filaments after mechanical testing. Increases of up to 10% in water absorption were measured for the samples with 40 wt% fibers and the fossil compatibilizer. The mechanical properties were improved by increasing the fraction of bagasse fibers from 0% to 20% and 40%. The suitability of the biocomposite filaments was tested for 3D printing, and some shapes were printed as demonstrators. Importantly, in a cradle-to-gate life cycle analysis of the biocomposites, we demonstrated that replacing fossil compatibilizer with a bio-based compatibilizer contributes to a reduction in CO2-eq emissions, and an increase in CO2 capture, achieving a CO2-eq storage of 2.12 kg CO2 eq/kg for the biocomposite containing 40% bagasse fibers and 6% bio-based compatibilizer.

Decellularized liver-regenerative 3D printing biomaterials for cell-based liver therapies via a designed procedure combined with papain-containing reagent treatments and supercritical fluids

2021 ◽  
pp. 1-8
Author(s):  
Ching-Cheng Huang
Keyword(s):  
3D Printing ◽  
Thermo Gravimetric Analysis ◽  
Extraction Process ◽  
Gravimetric Analysis ◽  
Collagen Scaffolds ◽  
Scanning Calorimetry ◽  
Porcine Liver ◽  
Good Thermal Stability ◽  
Decellularized Liver ◽  
Liver Collagen

BACKGROUND: The biologic scaffolds derived from decellularized tissues and organs have been successfully developed in a variety of preclinical and/or clinical studies. OBJECTIVE: The new decellularized liver-regenerative 3D printing biomaterials were designed and prepared for cell-based liver therapies. METHODS: An extraction process was employed to remove the tissue and cellular molecules from porcine liver via pretreatment of supercritical fluid of carbon dioxide (ScCO2). Varying porosities of the decellularized liver tissues were created using papain-containing reagent treatments after ScCO2. RESULTS: The resulting liver-regenerative 3D printing biomaterials of decellularized liver collagen scaffolds were characterized by Fourier transform infrared spectroscopy, thermo-gravimetric analysis, differential scanning calorimetry and scanning electron microscopy. CONCLUSIONS: The decellularized liver collagen scaffolds with good thermal stability (>150 °C) were obtained and employed as liver-regenerative 3D printing biomaterials for cell-based liver therapies.

scholarly journals Formulation and Evaluation of 3D Printed Pregabalin Tablets Targeted For Neuropathic Pain By Qbd Approach For Personalized Medicine

2021 ◽  
Vol 11 (6) ◽  
pp. 1-13
Author(s):  
Bhusnure omprakash Gadgeppa ◽  
Mule Shrikrishna Tukaram ◽  
Gholvesachin Baburo ◽  
Giram padamja Sidram ◽  
Gaurav Agarwal Prof.(Dr) ◽  
...  
Keyword(s):  
Neuropathic Pain ◽  
3D Printing ◽  
Drug Release ◽  
Thermo Gravimetric Analysis ◽  
Processing Condition ◽  
Gravimetric Analysis ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
3D Printed

The 3D printing technology has been newly employed in the design and formulation of different dosage forms with the aim formulation and evaluation of 3D printed Pregabalin tablets for the treatment of neuropathic pain by QbD approach. Drug (Pregabalin) together with other excipients, were mixed and extruded into filaments by hot melt extrusion. Then with the help of fused deposition modeling these obtained filaments were printed into tablets. Due to the use of different polymers in the printed formulation different release profiles for the 3D printed tablets were obtained. Drug release characteristics change the infill or the size of the printed tablets, allowing the personalization of the tablets. Filaments and tablets were characterized by means of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X- RAY powder diffraction (XRPD), and thermo gravimetric analysis (TGA). The results showed that after printing, the processing condition did not have a significant impact on the stability of the drug and the crystalline nature of the drug remained. FDM 3D printing makes it possible not only to formulate 3D printing Pregabalin tablets for the treatment of neuropathic pain but also to modify the potential of additive manufacturing in the development of personalized dose medicines. This study presents novel formulations containing Pregabalin for prevention of neuropathic pain and investigates 3D printing technology for personalized production of oral solid dosage from enabling adjustable dose as well as drug release properties.

scholarly journals Influence of Controlled Cooling on Crystallinity of Poly(L-Lactic Acid) Scaffolds after Hydrolytic Degradation

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2943
Author(s):  
Javier Vazquez-Armendariz ◽  
Raquel Tejeda-Alejandre ◽  
Aida Rodriguez-Garcia ◽  
Yadira I. Vega-Cantu ◽  
Christian Mendoza-Buenrostro ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Cooling System ◽  
Thermo Gravimetric Analysis ◽  
Hydrolytic Degradation ◽  
Degree Of Crystallinity ◽  
Gravimetric Analysis ◽  
Controlled Cooling ◽  
Scanning Calorimetry ◽  
Fused Deposition ◽  
Deposition Modeling

The use of hybrid manufacturing to produce bimodal scaffolds has represented a great advancement in tissue engineering. These scaffolds provide a favorable environment in which cells can adhere and produce new tissue. However, there are several areas of opportunity to manufacture structures that provide enough strength and rigidity, while also improving chemical integrity. As an advancement in the manufacturing process of scaffolds, a cooling system was introduced in a fused deposition modeling (FDM) machine to vary the temperature on the printing bed. Two groups of polylactic acid (PLA) scaffolds were then printed at two different bed temperatures. The rate of degradation was evaluated during eight weeks in Hank’s Balanced Salt Solution (HBSS) in a controlled environment (37 °C–120 rpm) to assess crystallinity. Results showed the influence of the cooling system on the degradation rate of printed scaffolds after the immersion period. This phenomenon was attributable to the mechanism associated with alkaline hydrolysis, where a higher degree of crystallinity obtained in one group induced greater rates of mass loss. The overall crystallinity was observed, through differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA), and Fourier transformed infrared spectroscopy (FTIR) analysis, to increase with time because of the erosion of some amorphous parts after immersion.

Synthesis, characterization and corrosion protection properties of polyN-(p-bromophenyl)-2-methacrylamide-co-glycidyl methacrylate on low nickel stainless steel

2011 ◽  
Vol 31 (2-3) ◽  
Author(s):  
Sakvai Mohammed Safiullah ◽  
Deivasigamani Thirumoolan ◽  
Kottur Anver Basha ◽  
K. Mani Govindaraju ◽  
Dhanraj Gopi ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Corrosion Protection ◽  
Glycidyl Methacrylate ◽  
Electrochemical Impedance ◽  
Thermo Gravimetric Analysis ◽  
Gel Permeation Chromatography ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Protection Efficiency ◽  
Ft Ir

Abstract The synthesis of copolymers from different feed ratios of N-(p-bromophenyl)-2- methacrylamide (PBPMA) and glycidyl methacrylate (GMA) was achieved by using free radical solution polymerization technique and characterized using FT-IR, 1H and 13C NMR spectroscopy. The thermal stability of the synthesized copolymers was studied using thermo-gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The molecular weight of the copolymer is determined by gel permeation chromatography (GPC). The corrosion performances of low nickel stainless steel specimens dip coated with different composition of copolymers were investigated in 0.5 M H2SO4 using potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) techniques. The polarization and impedance measurements showed different corrosion protection efficiency with change in composition of the copolymers. It was found that the corrosion protection properties are owing to the barrier effect of the polymer layer covered on the low nickel stainless steel surfaces. However, it is observed that the mole ratio of PBPMA and GMA plays a major role in the protective nature of the copolymer.

Graphene Nanoplates Filled Nylon 6,6 Nanocomposites, Morphological, Thermal, Mechanical and Solvent Uptake Study

2019 ◽  
Vol 41 (3) ◽  
pp. 388-388
Author(s):  
Khalid Saeed Khalid Saeed ◽  
Tariq Shah and Ahmad Hassan Tariq Shah and Ahmad Hassan
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Neutral Red ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Nucleation Effect ◽  
Morphological Studies ◽  
Solvent Uptake ◽  
Nylon 6,6 ◽  
Dsc Analyses ◽  
Graphene Nanoplates

Effect of graphene nanoplates (GNPs) on the properties of Nylon 6,6 (Nyl 6,6) is investigated in present study. The morphological studies presented that the GNPs were dispersed inside the Nyl 6,6 matrix. The thermo gravimetric analysis (TGA) illustrated that the thermal degradation of nanocomposites samples were started at the range of 350-393 oC, which was appreciably higher than neat Nyl 6,6 (360 oC). The differential scanning calorimetry (DSC) analyses revealed that the crystallization temperature (Tc) of GNPs/Nyl 6,6 increased as increased the addition of GNPs, which might be due to the nucleation effect of GNPs. The mechanical properties of Nyl 6,6 was enhanced by incorporation of GNPs upto the addition of an optimal quantity of filler (5%wt GNPs) into the polymer matrix. The stress yield and Young’s modulus of 5%wt GNPs/Nyl 6,6 was 96.79 and 1.54, N/nm2, respectively. Both Nyl 6,6 and nanocomposites samples were also used for the adsorption of Neutral red chloride (NRC) dye, which significantly remove the dye from the aqueous solution. The neat nylon 6,6 and GNPs (5 and 10 wt%)/Nyl 6,6 adsorbed about 88.49, 93.15, and 93.60% within 2 h, respectively.

Characterization of Novel Solid Dispersions of Moringa oleifera Leaf Powder Using Thermo-Analytical Techniques

Processes ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 2230
Author(s):  
Nontsikelelo Noxolo Tafu ◽  
Victoria A. Jideani
Keyword(s):  
Solid Dispersion ◽  
Moringa Oleifera ◽  
Solid Dispersions ◽  
Intermolecular Hydrogen Bond ◽  
Thermo Gravimetric Analysis ◽  
Analytical Techniques ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Hydrogen Bond Interactions ◽  
Leaf Powder

Moringa oleifera leaf powder (MOLP) has been identified as the most important functional ingredient owing to its rich nutritional profile and healthy effects. The solubility and functional properties of this ingredient can be enhanced through solid dispersion technology. This study aimed to investigate the effects of polyethylene glycols (PEGs) 4000 and 6000 as hydrophilic carriers and solid dispersion techniques (freeze-drying, melting, solvent evaporation, and microwave irradiation) on the crystallinity and thermal stability of solid-dispersed Moringa oleifera leaf powders (SDMOLPs). SDMOLPs were dully characterized using powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR). The PXRD results revealed that the solid dispersions were partially amorphous with strong diffraction peaks at 2θ values of 19° and 23°. The calorimetric and thermogravimetric curves showed that PEGs conferred greater stability on the dispersions. The FTIR studyrevealed the existence of strong intermolecular hydrogen bond interactions between MOLP and PEG functional groups. MOLP solid dispersions may be useful in functional foods and beverages and nutraceutical formulations.

scholarly journals Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery

Pharmaceutics ◽  
2018 ◽  
Vol 10 (4) ◽  
pp. 203 ◽  
Author(s):  
Deck Tan ◽  
Mohammed Maniruzzaman ◽  
Ali Nokhodchi
Keyword(s):  
3D Printing ◽  
Hot Melt Extrusion ◽  
Pharmaceutical Products ◽  
Fused Deposition Modelling ◽  
Melt Extrusion ◽  
3D Object ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
Pharmaceutical Applications ◽  
Hot Melt

Three-dimensional printing, also known as additive manufacturing, is a fabrication process whereby a 3D object is created layer-by-layer by depositing a feedstock material such as thermoplastic polymer. The 3D printing technology has been widely used for rapid prototyping and its interest as a fabrication method has grown significantly across many disciplines. The most common 3D printing technology is called the Fused Deposition Modelling (FDM) which utilises thermoplastic filaments as a starting material, then extrudes the material in sequential layers above its melting temperature to create a 3D object. These filaments can be fabricated using the Hot-Melt Extrusion (HME) technology. The advantage of using HME to manufacture polymer filaments for FDM printing is that a homogenous solid dispersion of two or more pharmaceutical excipients i.e., polymers can be made and a thermostable drug can even be introduced in the filament composition, which is otherwise impractical with any other techniques. By introducing HME techniques for 3D printing filament development can improve the bioavailability and solubility of drugs as well as sustain the drug release for a prolonged period of time. The latter is of particular interest when medical implants are considered via 3D printing. In recent years, there has been increasing interest in implementing a continuous manufacturing method on pharmaceutical products development and manufacture, in order to ensure high quality and efficacy with less batch-to-batch variations of the pharmaceutical products. The HME and FDM technology can be combined into one integrated continuous processing platform. This article reviews the working principle of Hot Melt Extrusion and Fused Deposition Modelling, and how these two technologies can be combined for the use of advanced pharmaceutical applications.

Sign in / Sign up

Export Citation Format

Share Document