scholarly journals Phase Field Study of the Microstructural Dynamic Evolution and Mechanical Response of NiTi Shape Memory Alloy under Mechanical Loading

Materials ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 183
Author(s):  
Shangbin Xi ◽  
Yu Su
Keyword(s):  
Shape Memory ◽  
Applied Stress ◽  
Phase Field ◽  
Mechanical Response ◽  
Niti Alloy ◽  
Dynamic Evolution ◽  
Niti Shape Memory Alloy ◽  
Free Energy Function ◽  
Potential Wells ◽  
Tension And Compression

For the purpose of investigating the microstructural evolution and the mechanical response under applied loads, a new phase field model based on the Ginzburg-Landau theory is developed by designing a free energy function with six potential wells that represent six martensite variants. Two-dimensional phase field simulations show that, in the process of a shape memory effect induced by temperature-stress, the reduction-disappearance of cubic austenite phase and nucleation-growth of monoclinic martensite multi-variants result in a poly-twined martensitic microstructure. The microstructure of martensitic de-twinning consists of different martensite multi-variants in the tension and compression, which reveals the microstructural asymmetry of nickel-titanium (NiTi) alloy in the tension and compression. Furthermore, in the process of super-elasticity induced by tensile or compressive stress, all martensite variants nucleate and expand as the applied stress gradually increases from zero. Whereas, when the applied stress reaches critical stress, only the martensite variants of applied stress-accommodating continue to expand and others fade gradually. Moreover, the twinned martensite microstructures formed in the tension and compression contain different martensite multi-variants. The study of the microstructural dynamic evolution in the phase transformation can provide a significant reference in improving properties of shape memory alloys that researchers have been exploring in recent years.

Electric Transport Properties of a NiTi Shape Memory Alloy Under Applied Stress.

1991 ◽  
Vol 246 ◽  
Author(s):  
G. Airoldi ◽  
G. Riva ◽  
T. Ranucci ◽  
B. Vicentini
Keyword(s):  
Shape Memory ◽  
Applied Stress ◽  
Single Phase ◽  
Niti Alloy ◽  
Parent Phase ◽  
Physical Property ◽  
Niti Shape Memory Alloy ◽  
Hysteresis Cycle ◽  
Electric Transport ◽  
Deformation Processes

AbstractIt is well known that mechanical properties of Shape Memory Alloys are strongly dependent upon the test temperature (T) respect to transformation temperatures: the stress-strain curves however hinder the true deformation processes acting.Electrical resistance(ER), a physical property sensibly affected by electronic structure modifications, traditionally used to follow the growth of thermal martensite, is here investigated to follow the modifications of a NiTi alloy, in an initial single phase structure, under applied stress. ER measurements are here detected with the aim to distinguish different deformation processes at four test temperatures Ti (i=1,..,4): in martensitic phase,either at T1 <Mf or at T2<As within the hysteresis cycle; in parent phase, either at Af<T3 or at Ms<T4 within the hysteresis cycle, where T2 = T4. Results are examined in comparison with previous obtained data and discussed at the light of imprinted deformation.

scholarly journals Net-Shape NiTi Shape Memory Alloy by Spark Plasma Sintering Method

2021 ◽  
Vol 11 (4) ◽  
pp. 1802
Author(s):  
Sneha Samal ◽  
Orsolya Molnárová ◽  
Filip Průša ◽  
Jaromír Kopeček ◽  
Luděk Heller ◽  
...  
Keyword(s):  
Shape Memory ◽  
Shape Memory Effect ◽  
Spark Plasma Sintering ◽  
Memory Effect ◽  
Niti Alloy ◽  
Niti Shape Memory Alloy ◽  
Good Shape ◽  
Plasma Sintering ◽  
Shape Memory Effects ◽  
Spark Plasma

An analysis of the shape memory effect of a NiTi alloy by using the spark plasma sintering approach has been carried out. Spark plasma sintering of Ti50Ni50 powder (20–63 µm) at a temperature of 900 °C produced specimens showing good shape memory effects. However, the sample showed 2.5% porosity due to a load of 48 MPa. Furthermore, an apparent shape memory effect was recorded and the specimens were characterized by uniformity in chemical composition and shape memory alloys of NiTi showed significant austenite phases with a bending strain recovery of >2.5%.

scholarly journals Key Properties of a Bioactive Ag-SiO2/TiO2 Coating on NiTi Shape Memory Alloy as Necessary at the Development of a New Class of Biomedical Materials

2021 ◽  
Vol 22 (2) ◽  
pp. 507
Author(s):  
Mateusz Dulski ◽  
Robert Gawecki ◽  
Sławomir Sułowicz ◽  
Michal Cichomski ◽  
Alicja Kazek-Kęsik ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Dermal Fibroblast ◽  
Niti Alloy ◽  
Bacterial Biofilm ◽  
Niti Shape Memory Alloy ◽  
Normal Human Dermal Fibroblast ◽  
Water Contact ◽  
Nano Coating

Recent years have seen the dynamic development of methods for functionalizing the surface of implants using biomaterials that can mimic the physical and mechanical nature of native tissue, prevent the formation of bacterial biofilm, promote osteoconduction, and have the ability to sustain cell proliferation. One of the concepts for achieving this goal, which is presented in this work, is to functionalize the surface of NiTi shape memory alloy by an atypical glass-like nanocomposite that consists of SiO2-TiO2 with silver nanoparticles. However, determining the potential medical uses of bio(nano)coating prepared in this way requires an analysis of its surface roughness, tribology, or wettability, especially in the context of the commonly used reference coat-forming hydroxyapatite (HAp). According to our results, the surface roughness ranged between (112 ± 3) nm (Ag-SiO2)—(141 ± 5) nm (HAp), the water contact angle was in the range (74.8 ± 1.6)° (Ag-SiO2)—(70.6 ± 1.2)° (HAp), while the surface free energy was in the range of 45.4 mJ/m2 (Ag-SiO2)—46.8 mJ/m2 (HAp). The adhesive force and friction coefficient were determined to be 1.04 (Ag-SiO2)—1.14 (HAp) and 0.247 ± 0.012 (Ag-SiO2) and 0.397 ± 0.034 (HAp), respectively. The chemical data showed that the release of the metal, mainly Ni from the covered NiTi substrate or Ag from Ag-SiO2 coating had a negligible effect. It was revealed that the NiTi alloy that was coated with Ag-SiO2 did not favor the formation of E. coli or S. aureus biofilm compared to the HAp-coated alloy. Moreover, both approaches to surface functionalization indicated good viability of the normal human dermal fibroblast and osteoblast cells and confirmed the high osteoconductive features of the biomaterial. The similarities of both types of coat-forming materials indicate an excellent potential of the silver-silica composite as a new material for the functionalization of the surface of a biomaterial and the development of a new type of functionalized implants.

EFFECTS OF PARTICLE SIZE AND SINTERING TEMPERATURE ON SUPERELASTICITY BEHAVIOR OF NiTi SHAPE MEMORY ALLOY USING NANOINDENTATION

2021 ◽  
pp. 2150024
Author(s):  
C. VELMURUGAN ◽  
V. SENTHILKUMAR
Keyword(s):  
Particle Size ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Sintering Temperature ◽  
Niti Alloy ◽  
Indentation Load ◽  
Niti Shape Memory Alloy ◽  
Recovery Ratio ◽  
Work Recovery ◽  
Niti Sma

The present study investigates the superelasticity properties of spark plasma sintered (SPS) nickel titanium shape memory alloy (NiTi SMA) with the influence of sintering temperature and particle size. The nanoindentation is conducted on the surface of the NiTi SMA at various loads such as 100, 300 and 500[Formula: see text]mN. The nanoindentation technique determines the quantitative results of elasto-plastic properties such as depth recovery in the form of superelasticity, stiffness, hardness and work recovery ratio from load–depth ([Formula: see text]–[Formula: see text]) data during loading and unloading of the indenter. Experimental findings show that the depth and work recovery ratio increases with the decrease of indentation load and particle size. In contrast, increasing the sintering temperature exhibited a better depth and work recovery due to the removal of pores which could enhance the reverse transformation. The contact stiffness is influenced by [Formula: see text] which leads to attain a maximum stiffness at the highest load (500[Formula: see text]mN) and particle size (45[Formula: see text][Formula: see text]m) along with the lowest sintering temperature (700∘C). NiTi alloy exhibited a maximum hardness of 9.46[Formula: see text]GPa when subjected to indent at the lowest load and particle size sintered at 800∘C. The present study reveals a better superelastic behavior in NiTi SMA by reducing the particle size and indentation load associated with the enhancement of sintering temperature.

scholarly journals Biocompatibility of Nanoporous TiO2Coating on NiTi Alloy Prepared via Dealloying Method

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Jin Huang ◽  
Junqiang Wang ◽  
Xiangdong Su ◽  
Weichang Hao ◽  
Tianmin Wang ◽  
...  
Keyword(s):  
Low Temperature ◽  
Shape Memory ◽  
Biomedical Application ◽  
Niti Alloy ◽  
Treatment Method ◽  
Niti Shape Memory Alloy ◽  
Contact Method ◽  
Biological Compatibility ◽  
Before And After ◽  
Niti Shape Memory Alloys

This paper investigated the biocompatibility of nanoporous TiO2coating on NiTi shape-memory alloy (SMA) prepared via dealloying method. Our previous study shows that the dealloying treatment at low temperature leads to 130 nm Ni-free surface titania surface layer, which possesses good bioactivity because of the combination of hydroxyl (OH−) group in the process of dealloying treatment simultaneously. In this paper, the biological compatibility of NiTi alloy before and after dealloying treatment was evaluated and compared by direct contact method with dermal mesenchymal stem cells (DMSCs) by the isolated culture way. The interrelation between the biological compatibility and surface change of material after modification was systematically analyzed. As a consequence, the dealloying treatment method at low temperature could be of interest for biomedical application, as it can avoid sensitization and allergies and improve biocompatibility of NiTi shape-memory alloys. Thus it laid the foundation of the clinical trials for surface modification of NiTi memory alloy.

The effects of shape memory alloys’ tension–compression asymmetryon NiTi endodontic files’ fatigue life

2018 ◽  
Vol 232 (5) ◽  
pp. 437-445 ◽  
Author(s):  
MR Karamooz-Ravari ◽  
R Dehghani
Keyword(s):  
Finite Element ◽  
Shape Memory ◽  
Numerical Models ◽  
Equivalent Stress ◽  
Element Model ◽  
Niti Shape Memory Alloy ◽  
Element Analysis ◽  
Tension And Compression ◽  
Von Mises Equivalent Stress ◽  
Von Mises

Nowadays, NiTi rotary endodontic files are of great importance due to their flexibility which enables the device to cover all the portions of curved canal of tooth. Although this class of files are flexible, intracanal separation might happen during canal preparation due to bending or torsional loadings of the file. Since fabrication and characterization of such devices is challenging, time-consuming, and expensive, it is preferable to predict this failure before fabrication using numerical models. It is demonstrated that NiTi shape memory alloy shows asymmetric material response in tension and compression which can significantly affect the lifetime of the files fabricated from. In this article, the effects of this material asymmetry on the bending response of rotary files are assessed using finite element analysis. To do so, a constitutive model which takes material asymmetry into account is used in combination with the finite element model of a RaCe file. The results show that the material asymmetry can significantly affect the maximum von Mises equivalent stress as well as the force–displacement response of the tip of this file.

SHAPE MEMORY INVESTIGATION OF SMART CAMAR LOGO USING NITI ALLOY WIRE

2015 ◽  
Vol 76 (3) ◽  
Author(s):  
Muhammad Safwan Shuhaimi ◽  
Nubailah Abd. Hamid ◽  
Rosliza Razali ◽  
Muhammad Hussain Ismail
Keyword(s):  
Phase Transformation ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Niti Alloy ◽  
Niti Shape Memory Alloy ◽  
Shape Effect ◽  
Niti Wire ◽  
The Wire ◽  
Reversible Phase

This project is investigates of NiTi shape memory alloy for simple smart application. The shape memory effect (SME) is attributed from the reversible phase transformation when subjected to stress and temperature. In this study, a small model of CAMAR logo was designed to mimic the shape memory effect. Three samples of wire were investigated; (i) Austenitic NiTi (ii) Martensitic NiTi and (iii) commercial plain carbon steel. The reversible austenite to martensite transformation of the NiTi wire was investigated by a differential scanning calorimetry (DSC) at temperatures ranging from -50 and 200oC. The wire was shaped into CAMAR logo using a mould and then heated at 500°C for 30 minutes in a high temperature furnace. To observe the shape effect recovery, the wire was straighten and reheated in warm water at different temperatures. Results showed that the austenitic wire exhibited complete shape memory recovery after heated at temperature approximately 35°C and  80°C. For the martensitic wire, complete recovery was only observed when the water temperature was ~ 80°C and no recovery was observed at ~30°C. This recovery effect was significantly influenced by the reversible phase transformation temperatures (PTTs) which attributed from the Austenite finish (Af) temperature.

Isogeometric Analysis of 3D Dynamic Thermo-Mechanical Phase-Field Model for Cubic-to-Tetragonal Phase Transformations in Shape Memory Alloys

2015 ◽  
Author(s):  
Rakesh Dhote ◽  
Kamran Behdinan
Keyword(s):  
Shape Memory ◽  
Phase Transformations ◽  
Phase Field ◽  
Isogeometric Analysis ◽  
Domain Walls ◽  
Landau Theory ◽  
Phase Field Model ◽  
Diffuse Interface ◽  
Free Energy Function ◽  
Martensitic Phase Transformations

In this paper, we study the dynamic thermo-mechanical behaviors of 3D shape memory alloy (SMA) nanostructures using the phase-field (PF) model. The PF model is based on the Ginzburg-Landau theory and requires a non-convex free energy function for an adequate description of the cubic-to-tetragonal martensitic phase transformations. We have developed a model that includes domain walls, treated as a diffuse interface, which leads to a fourth-order differential equation in a strain-based order parameter PF model. Arising numerical challenges have been overcome based on an isogeometric analysis (IGA) framework. Microstructure morphology evolution and consequent thermo-mechanical properties have been studied on SMA nanostructures of different geometries. The numerical results are in agreement with experimental observations. The developed coupled dynamic model has provided a better understanding of underlying microstructures and behaviors, which can be used for development of better SMA-based devices.

Corrosion Kinetics of Laser Treated NiTi Shape Memory Alloy Biomaterials

1996 ◽  
Vol 459 ◽  
Author(s):  
F. Villermaux ◽  
I. Nakatsugawa ◽  
M. Tabrizian ◽  
D. L. Piron ◽  
M. Meunier ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Laser Treatment ◽  
Niti Alloy ◽  
Niti Shape Memory Alloy ◽  
Surgical Implants ◽  
Hank’S Solution ◽  
Kinetics Of ◽  
Human Fluids

ABSTRACTNiTi shape memory alloy presents interesting mechanical properties as surgical implants. However, due to its high amount of Ni which may dissolve and release toxic ions in human fluids, the medical use of this material is a great concern. We have developed a laser treatment which modifies the oxide layer and enhances uniform and localised corrosion resistance of NiTi alloy.In this paper we further analysed the effect of this treatment with potentiostatic and AC impedance measurements in physiological Hank's solution. We conclude that the laser treatment creates a stable passive film which results in improved corrosion resistance of this alloy.

The Structure and Shape Memory of the Hot Extruded NiTi Alloy

2016 ◽  
Vol 687 ◽  
pp. 19-24
Author(s):  
Tomasz Goryczka ◽  
Zdzisław Lekston ◽  
Jerzy Dybich ◽  
Maciej Zubko ◽  
Tadeusz Wierzchoń ◽  
...  
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Cast Alloy ◽  
Niti Alloy ◽  
Hot Extrusion ◽  
Point Of View ◽  
Niti Shape Memory Alloy ◽  
X Ray Diffraction ◽  
Axial Texture ◽  
Texture Type

The paper presents results of structural studies of hot extruded NiTi shape memory alloy that is in the B2 phase at room temperature. Texture of the alloy was determined from the X-ray diffraction measurements. It was found that in result of 60 % sample reduction (at a cross-section of a bar formed by hot extrusion) weak axial texture - type <110>B2 was formed. The volume of the grains oriented in this way was approx. 20 %. Basing on metallographic observations it was also found that the size of the grains formed as a result of the thermomechanical treatment was uniform with the average area of 1700 μm2. This information is significant from the point of view of functional properties. Hot extruded alloy revealed presence of the reversible martensitic transformation. Its characteristic temperatures were slight higher than in as-cast alloy. Moreover, the extruded NiTi alloy showed 100 % of the shape recovery.

Sign in / Sign up

Export Citation Format

Share Document