scholarly journals The Role of Supplementary Cementitious Materials (SCMs) in Ultra High Performance Concrete (UHPC): A Review

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1472
Author(s):  
Sungwoo Park ◽  
Siyu Wu ◽  
Zhichao Liu ◽  
Sukhoon Pyo
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Limestone Powder ◽  
Ultra High Performance Concrete ◽  
Environmental Aspect ◽  
Material Requirement ◽  
Strength And Durability

Although ultra high-performance concrete (UHPC) has great performance in strength and durability, it has a disadvantage in the environmental aspect; it contains a large amount of cement that is responsible for a high amount of CO2 emissions from UHPC. Supplementary cementitious materials (SCMs), industrial by-products or naturally occurring materials can help relieve the environmental burden by reducing the amount of cement in UHPC. This paper reviews the effect of SCMs on the properties of UHPC in the aspects of material properties and environmental impacts. It was found that various kinds of SCMs have been used in UHPC in the literature and they can be classified as slag, fly ash, limestone powder, metakaolin, and others. The effects of each SCM are discussed mainly on the early age compressive strength, the late age compressive strength, the workability, and the shrinkage of UHPC. It can be concluded that various forms of SCMs were successfully applied to UHPC possessing the material requirement of UHPC such as compressive strength. Finally, the analysis on the environmental impact of the UHPC mix designs with the SCMs is provided using embodied CO2 generated during the material production.

Effects of corrosion inhibiting admixtures and supplementary cementitious materials combinations on the strength and certain durability properties of HPC

2017 ◽  
Vol 44 (11) ◽  
pp. 918-926 ◽  
Author(s):  
H.Z. Lopez-Calvo ◽  
P. Montes-Garcia ◽  
E.M. Alonso-Guzmán ◽  
W. Martinez-Molina ◽  
T.W. Bremner ◽  
...  
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Durability Properties ◽  
Corrosion Evaluation ◽  
Chloride Profiles ◽  
Calcium Nitrite ◽  
Strength And Durability

This paper reports a study carried out to evaluate the effects of corrosion inhibiting admixtures, calcium nitrite and disodium tetrapropenyl succinate, in combination with supplementary cementitious materials, fly ash and silica fume Portland cement, on the compressive strength and certain durability properties of high performance concrete. Mixture formulations, including binary and ternary combinations of these admixtures were evaluated. Chloride profiles after 91 and 365 days of exposure and the compressive strength and electrical resistivity at 1, 7, 14, 28, 180, and 365 days of age were estimated. Also, results of corrosion evaluation after five-year exposure to a natural marine environment at Treat Island Maine, USA are presented and discussed. Results indicate that the use of corrosion inhibitors in combination with supplementary cementitious materials was beneficial, albeit to various degrees, in enhancing the strength and durability properties of high performance concrete with no noticeable adverse effects.

scholarly journals Experimental Investigation and Prediction of Compressive Strength of Ultra-High Performance Concrete Containing Supplementary Cementitious Materials

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Jisong Zhang ◽  
Yinghua Zhao ◽  
Haijiang Li
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Ann Model ◽  
Ultra High Performance Concrete ◽  
Superior Mechanical Properties ◽  
Normal Strength

Ultra-high performance concrete (UHPC) has superior mechanical properties and durability to normal strength concrete. However, the high amount of cement, high environmental impact, and initial cost are regarded as disadvantages, restricting its wider application. Incorporation of supplementary cementitious materials (SCMs) in UHPC is an effective way to reduce the amount of cement needed while contributing to the sustainability and cost. This paper investigates the mechanical properties and microstructure of UHPC containing fly ash (FA) and silica fume (SF) with the aim of contributing to this issue. The results indicate that, on the basis of 30% FA replacement, the incorporation of 10% and 20% SF showed equivalent or higher mechanical properties compared to the reference samples. The microstructure and pore volume of the UHPCs were also examined. Furthermore, to minimise the experimental workload of future studies, a prediction model is developed to predict the compressive strength of the UHPC using artificial neural networks (ANNs). The results indicate that the developed ANN model has high accuracy and can be used for the prediction of the compressive strength of UHPC with these SCMs.

scholarly journals Effect of Graphene Oxide Nanosheets on Physical Properties of Ultra-High-Performance Concrete with High Volume Supplementary Cementitious Materials

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1929 ◽  
Author(s):  
Yu-You Wu ◽  
Jing Zhang ◽  
Changjiang Liu ◽  
Zhoulian Zheng ◽  
Paul Lambert
Keyword(s):  
Graphene Oxide ◽  
Physical Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Steam Curing ◽  
Slump Flow

Nanomaterials have been increasingly employed for improving the mechanical properties and durability of ultra-high-performance concrete (UHPC) with high volume supplementary cementitious materials (SCMs). Recently, graphene oxide (GO) nanosheets have appeared as one of the most promising nanomaterials for enhancing the properties of cementitious composites. To date, a majority of studies have concentrated on cement pastes and mortars with fewer investigations on normal concrete, ultra-high strength concrete, and ultra-high-performance cement-based composites with a high volume of cement content. The studies of UHPC with high volume SCMs have not yet been widely investigated. This paper presents an experimental investigation into the mini slump flow and physical properties of such a UHPC containing GO nanosheets at additions from 0.00 to 0.05% by weight of cement and a water–cement ratio of 0.16. The study demonstrates that the mini slump flow gradually decreases with increasing GO nanosheet content. The results also confirm that the optimal content of GO nanosheets under standard curing and under steam curing is 0.02% and 0.04%, respectively, and the corresponding compressive and flexural strengths are significantly improved, establishing a fundamental step toward developing a cost-effective and environmentally friendly UHPC for more sustainable infrastructure.

scholarly journals Production of Ultra-High-Performance Concrete with Low Energy Consumption and Carbon Footprint Using Supplementary Cementitious Materials Instead of Silica Fume: A Review

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8291
Author(s):  
Mays A. Hamad ◽  
Mohammed Nasr ◽  
Ali Shubbar ◽  
Zainab Al-Khafaji ◽  
Zainab Al Masoodi ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Cement Production ◽  
Granulated Blast Furnace Slag ◽  
The Impact

The increase in cement production as a result of growing demand in the construction sector means an increase in energy consumption and CO2 emissions. These emissions are estimated at 7% of the global production of CO2. Ultra-high-performance concrete (UHPC) has excellent mechanical and durability characteristics. Nevertheless, it is costly and affects the environment due to its high amount of cement, which may reach 800–1000 kg/m3. In order to reduce the cement content, silica fume (SF) was utilized as a partial alternative to cement in the production of UHPC. Nevertheless, SF is very expensive. Therefore, the researchers investigated the use of supplementary cementitious materials cheaper than SF. Very limited review investigates addressed the impact of such materials on different properties of UHPC in comparison to that of SF. Thus, this study aims to summarize the effectiveness of using some common supplementary cementitious materials, including fly ashes (FA), ground granulated blast furnace slag (GGBS), metakaolin (MK) and rice husk ashes (RHA) in the manufacturing of UHPC, and comparing the performance of each material with that of SF. The comparison among these substances was also discussed. It has been found that RHA is considered a successful alternative to SF to produce UHPC with similar or even higher properties than SF. Moreover, FA, GGBS and MK can be utilized in combination with SF (as a partial substitute of SF) as a result of having less pozzolanic activity than SF.

scholarly journals Review of The Cement-Based Composite Ultra-High-Performance Concrete (UHPC)

2019 ◽  
Vol 13 (1) ◽  
pp. 147-162 ◽  
Author(s):  
Edwin Paul Sidodikromo ◽  
Zhijun Chen ◽  
Muhammad Habib
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Cementitious Materials ◽  
Vital Role ◽  
Engineering Industry ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Strength Concrete ◽  
Normal Strength

Introduction: Ultra-High-Performance Concrete (UHPC) is an advanced type of concrete in the Civil Engineering industry. It is a cement-based composite which exhibits improved mechanical and durable properties showing a high compressive strength of not less than 150 MPa and high tensile strength of not less than 7 MPa. Objective: In this article, a review of the use of a different type of supplementary cementitious materials (SCMs) including fibers is made for obtaining the desired UHPC. Discussion and Conclusion: For this, it is vital to understand the principles of UHPC. UHPC has several advantages over normal strength concrete (NSC) and high strength concrete (HSC) with some commercially ready UHPC’s available, but the use of it is restricted due to the limited design codes. The influence of the curing type also plays a vital role in the overall performance of UHPC.

scholarly journals The effect of Vietnam’s nano-silica on mechanical properties of high-performance concrete

2021 ◽  
Vol 72 (1) ◽  
pp. 76-83
Author(s):  
Lam Le Hong ◽  
Lam Dao Duy ◽  
Huu Pham Duy
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Nano Silica ◽  
Nano Sio2 ◽  
Curing Period ◽  
Compressive Strength Test

The demand for High Performance Concrete (HPC) is steadily increasing with massive developments. Conventionally, it is possible to use industrial products such as silica fume (SF), fly ash, as supplementary cementitious materials (SCM), to enhance the attributes of HPC. In recent years, nano-silica (NS) is used as an additive in added mainly to fill up the deviation arises with the addition of SF for HPC. This study aims to optimize the proportion of NS (produced in Vietnam) in the mixture used for fabricating 70 MPa high-performance concrete. SiO2 powder with particle size from 10 to 15 nm were used for mixing. A series of compressive strength test of HPC with nano-SiO2 varied from 0 to 2.8 percent of total of all binders (0%, 1.2%, 2%, 2.8%), and the fixed percentage of silica fume at 8% were proposed. Results show compressive strength increases with the increase of nano-SiO2, but this increase stops after reaching 2%. And at day 28 of the curing period, only concrete mixture containing of 8% silica fume and 2% nano-SiO2, had the highest compressive strength.

scholarly journals Mechanical Properties of Ultra-High Performance Concrete before and after Exposure to High Temperatures

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 770 ◽  
Author(s):  
How-Ji Chen ◽  
Yi-Lin Yu ◽  
Chao-Wei Tang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
High Temperatures ◽  
High Performance ◽  
High Performance Concrete ◽  
Silicon Powder ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Splitting Strength ◽  
Experimental Group

Compared with ordinary concrete, ultra-high performance concrete (UHPC) has excellent toughness and better impact resistance. Under high temperatures, the microstructure and mechanical properties of UHPC may seriously deteriorate. As such, we first explored the properties of UHPC with a designed 28-day compressive strength of 120 MPa or higher in the fresh mix phase, and measured its hardened mechanical properties at seven days. The test variables included: the type of cementing material and the mixing ratio (silica ash, ultra-fine silicon powder), the type of fiber (steel fiber, polypropylene fiber), and the fiber content (volume percentage). In addition to the UHPC of the experimental group, pure concrete was used as the control group in the experiment; no fiber or supplementary cementitious materials (silica ash, ultra-fine silicon powder) were added to enable comparison and discussion and analysis. Then, the UHPC-1 specimens of the experimental group were selected for further compressive, flexural, and splitting strength tests and SEM observations after exposure to different target temperatures in an electric furnace. The test results show that at room temperature, the 56-day compressive strength of the UHPC-1 mix was 155.8 MPa, which is higher than the >150 MPa general compressive strength requirement for ultra-high-performance concrete. The residual compressive strength, flexural strength, and splitting strength of the UHPC-1 specimen after exposure to 300, 400, and 500 °C did not decrease significantly, and even increased due to the drying effect of heating. However, when the temperature was 600 °C, spalling occurred, so the residual mechanical strength rapidly declined. SEM observations confirmed that polypropylene fibers melted at high temperatures, thereby forming other channels that helped to reduce the internal vapor pressure of the UHPC and maintain a certain residual strength.

Sign in / Sign up

Export Citation Format

Share Document