scholarly journals Fatigue Resistance and Cracking Mechanism of Semi-Flexible Pavement Mixture

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5277
Author(s):  
Shiqi Wang ◽  
Huanyun Zhou ◽  
Xianhua Chen ◽  
Minghui Gong ◽  
Jinxiang Hong ◽  
...  
Keyword(s):  
Low Temperature ◽  
Fatigue Resistance ◽  
Stress Ratio ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Flexible Pavement ◽  
The Poor ◽  
Grouting Material ◽  
Cracking Mechanism

Semi-flexible pavement (SFP) is widely used in recent years because of its good rutting resistance, but it is easy to crack under traffic loads. A large number of studies are aimed at improving its crack resistance. However, the understanding of its fatigue resistance and fatigue-cracking mechanism is limited. Therefore, the semi-circular bending (SCB) fatigue test is used to evaluate the fatigue resistance of the SFP mixture. SCB fatigue tests under different temperature values and stress ratio were used to characterize the fatigue life of the SFP mixture, and its laboratory fatigue prediction model was established. The distribution of various phases of the SFP mixture in the fracture surface was analyzed by digital image processing technology, and its fatigue cracking mechanism was analyzed. The results show that the SFP mixture has better fatigue resistance under low temperature and low stress ratio, while its fatigue resistance under other environmental and load conditions is worse than that of asphalt mixture. The main reason for the poor fatigue resistance of the SFP mixture is the poor deformation capacity and low strength of grouting materials. Furthermore, the performance difference between grouting material and the asphalt binder is large, which leads to the difference of fatigue cracking mechanism of the SFP mixture under different conditions. Under the fatigue load, the weak position of the SFP mixture at a low temperature is asphalt binder and its interface with other materials, while at medium and high temperatures, the weak position of the SFP mixture is inside the grouting material. The research provides a basis for the calculation of the service life of the SFP structure, provides a reference for the improvement direction of the SFP mixture composition and internal structure.

scholarly journals Effect of Blending Degree between Virgin and Aged Binder on Pavement Performance of Recycled Asphalt Mixture with High RAP Content

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Ying Xu ◽  
Zhijing Chou ◽  
Yunze Li ◽  
Jie Ji ◽  
Shi-fa Xu
Keyword(s):  
Low Temperature ◽  
Fatigue Resistance ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Pavement Performance ◽  
Design Stage ◽  
Recycled Asphalt ◽  
Moisture Stability ◽  
Aged Binder ◽  
Resistance Performance

In this study, the influence of the blending degree between virgin and aged binder on the pavement performance of hot-mix recycled asphalt mixture (HMRAM) with high RAP content is analyzed. The aggregate gradation of AC-16 was selected. The RAP contents were 30, 40, and 50%. HMRAMs with different degrees of blending (DOBs) were prepared by changing the mixing temperature (150, 165, and 180°C) without the occurrence of excessive aging for asphalt binders. An improved Hirsch dynamic modulus prediction model was then used to quantitatively characterize the DOB of HMRAM. Finally, the high-temperature, low-temperature, moisture stability, and fatigue resistance performance of HMRAM were tested and the effect of the DOB between the virgin and aged asphalt binder on the pavement performance was analyzed. The results showed that the DOB between the virgin and aged asphalt binder cannot reach 100% at the three mixing temperatures for HMRAM with 30, 40, and 50% RAP contents, which is inconsistent with the assumption of complete blending in China’s specification. The dynamic stability of the mixture gradually decreases with the increased DOB for HMRAM with a high RAP content, while the moisture stability, low-temperature, and fatigue resistance performance are continuously improved. This means that with the increase in DOB in the stage of open to traffic, meeting high-temperature performance criteria at the design stage may become unsatisfactory for HMRAM. The moisture stability, low-temperature performance, and fatigue resistance performances of HMRAM measured at the design stage were reasonable and conservative. The change in DOB significantly affects the content and properties of total free binder in HMRAM, affecting pavement performance. The content and physical properties of the RAP aggregate also have a significant impact on pavement performance.

AYMA: Mechanistic Probabilistic System To Evaluate Flexible Pavement Performance

1998 ◽  
Vol 1629 (1) ◽  
pp. 137-148 ◽  
Author(s):  
Manuel Ayres ◽  
Matthew W. Witczak
Keyword(s):  
Low Temperature ◽  
Mechanistic Model ◽  
Permanent Deformation ◽  
Probabilistic Approach ◽  
Fatigue Cracking ◽  
Flexible Pavement ◽  
Analysis And Design ◽  
Mechanistic Approach ◽  
Low Temperature Cracking ◽  
User Friendly

A new rational mechanistic model for analysis and design of flexible pavement systems has been developed. Furthermore, a fundamental probabilistic approach was incorporated into this system to account for the uncertainty of material and environmental conditions. The system was integrated in a user-friendly Windows program with a variety of user-selected options that include widely used models and those recently developed in the Strategic Highway Research Program project. Three basic types of distress can be investigated separately or all together, including fatigue cracking, permanent deformation, and low-temperature cracking. The mechanistic approach makes use of the JULEA layered elastic analysis program to obtain pavement response. The system provides optional deterministic and probabilistic solutions, accounts for aging and temperature effects over the asphalt materials, variable interface friction, multiple wheel loads, and user-selected locations for analysis. Tabular and graphical results provide expected distress values for each month as well as their variability, probability of failure, and assessment of the overall reliability of the pavement relative to each type of distress for a user-selected failure criterion. Only the load-associated module of AYMA is presented; a separate work describes the low-temperature cracking analysis.

Evaluation of Carbon Nanotubes Asphalt Modification Using the Superpave Criteria

2021 ◽  
Vol 902 ◽  
pp. 135-143
Author(s):  
Mohammad Ali Khasawneh ◽  
Khalid Ghuzlan ◽  
Nada Bani Melhem
Keyword(s):  
Carbon Nanotubes ◽  
Low Temperature ◽  
Rheological Properties ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Asphalt Binders ◽  
Asphalt Pavements ◽  
Low Temperature Cracking ◽  
Asphalt Modification ◽  
Rotational Viscosity

Rutting, fatigue cracking and low temperature cracking are the most important distresses in asphalt pavements as a result of changes in rheological properties of asphalt binder. Many types of modifiers were used to enhance asphalt behavior at both low and high temperatures. In this study, carbon nanotubes (CNT) were used as one of many nanomaterials that take a large attention in the latest research related to asphalt modification against different types of distresses. Effect of CNT on rheological properties of asphalt binder was investigated by testing unmodified and CNT modified asphalt binders using two of Superpave devices: Dynamic Shear Rheometer (DSR) and Bending Beam Rheometer (BBR). Penetration, softening point, flash point and rotational viscosity (RV) tests were carried out as well. CNT was added in 0.1%, 0.5% and 1% by weight of asphalt binder. It was found that adding CNT in 0.5% and 1% increase stiffness of asphalt and consequently asphalt pavement rutting resistance. On the other hand, this increase in stiffness affected pavement behavior adversely which is not desirable for fatigue and low temperature cracking. However, Superpave specifications were still satisfied and asphalt binder’s relaxation properties were improved upon CNT modification. It was eventually found that 0.5% of CNT is the optimum percentage for the best performance.

scholarly journals The Effect of Aging on the Cracking Resistance of Recycled Asphalt

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Mojtaba Mohammadafzali ◽  
Hesham Ali ◽  
James A. Musselman ◽  
Gregory A. Sholar ◽  
Aidin Massahi
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Reclaimed Asphalt Pavement ◽  
Cracking Resistance ◽  
Recycled Asphalt ◽  
Reclaimed Asphalt ◽  
Important Concern

Fatigue cracking is an important concern when a high percentage of Reclaimed Asphalt Pavement (RAP) is used in an asphalt mixture. The aging of the asphalt binder reduces its ductility and makes the pavement more susceptible to cracking. Rejuvenators are often added to high-RAP mixtures to enhance their performance. The aging of a rejuvenated binder is different from virgin asphalt. Therefore, the effect of aging on a recycled asphalt mixture can be different from its effect on a new one. This study evaluated the cracking resistance of 100% recycled asphalt binders and mixtures and investigated the effect of aging on this performance parameter. The cracking resistance of the binder samples was tested by a Bending Beam Rheometer. An accelerated pavement weathering system was used to age the asphalt mixtures and their cracking resistance was evaluated by the Texas Overlay Test. The results from binder and mixture tests mutually indicated that rejuvenated asphalt has a significantly better cracking resistance than virgin asphalt. Rejuvenated mixtures generally aged more rapidly, and the rate of aging was different for different rejuvenators.

scholarly journals Mechanics and Pavement Properties Research of Nanomaterial Modified Asphalt

2012 ◽  
Vol 5 ◽  
pp. 259-264 ◽  
Author(s):  
Shang Jiang Chen ◽  
Xiao Ning Zhang
Keyword(s):  
Low Temperature ◽  
Resilient Modulus ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Test Results ◽  
Modified Asphalt ◽  
Cleavage Strength ◽  
Modified Asphalt Binder ◽  
Powdered Rubber ◽  
Temperature Crack

Nanomaterials (nano powdered rubber VP401, VP501 and sepiolite and CaCo3 composites) were selected to improve the high-temperature and low-temperature performance of asphalt binder. Nanomaterial modified asphalt was prepared using the high shear machine. Laboratory experiments of asphalt binder and asphalt mixture were conducted to evaluate the properties of modified asphalt binder, including the penetration, ductility, softening point, viscosity, and etc. Also, asphalt mixture tests were carried out, such as the cleavage strength test, resilient modulus test, rutting test, water stability test and etc. Based on the test results, asphalt binder modified by 1% nano powdered rubber VP401 has better performance resistance to low temperature crack and rutting, compared to other nanomaterial modified asphalt binder.

scholarly journals Low-Temperature Performance of Polymer-Modified Binders in Stone Mastic Asphalts

2021 ◽  
Vol 6 (4) ◽  
pp. 58
Author(s):  
Ana Dias ◽  
Hugo Silva ◽  
Carlos Palha ◽  
Joel Oliveira
Keyword(s):  
Low Temperature ◽  
Low Temperatures ◽  
Elastic Recovery ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Thermal Cracking ◽  
Mechanical Tests ◽  
Asphalt Mixtures ◽  
Modified Binders

When temperatures drop to significantly low levels, road pavements are subjected to thermally-induced stresses, resulting in the appearance of thermal cracking, among other distresses. In these situations, polymers can be used as asphalt binder modifiers to improve certain asphalt binder properties, such as elastic recovery, cohesion, and ductility. Polymers also minimize some of the problems of asphalt mixtures, such as thermal and fatigue cracking and permanent deformation. This work’s objective was to study the behavior of asphalt mixtures at low temperatures, mainly when using modified binders. Thus, three binders were selected and tested: a standard 50/70 penetration grade bitumen and two polymer-modified binders (PMB), obtained by adding, respectively, 2.5% and 5.0% of styrene–butadiene–styrene (SBS) in the 50/70 pen grade bitumen. Then, the PMBs were incorporated into stone mastic asphalt mixtures (namely SMA 11), which were subjected to low-temperature mechanical tests based on the most recent European Standards. The asphalt binders and mixtures evaluated in this work were tested for thermal cracking resistance, creep, elastic recovery, cohesive strength, and ductility strength. Overall, it is concluded that the studied asphalt mixtures with PMB, with just 2.5% SBS, performed adequately at low temperatures down to −20 °C.

scholarly journals Evaluation of Low- and Intermediate-Temperature Performance of Bio Oil-Modified Asphalt Binders

2021 ◽  
Vol 13 (7) ◽  
pp. 4039
Author(s):  
Sara A. Alattieh ◽  
Ghazi G. Al-Khateeb ◽  
Waleed Zeiada
Keyword(s):  
Low Temperature ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Asphalt Binders ◽  
Tensile Stresses ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Bio Oil ◽  
Low Temperature Cracking ◽  
Low Temperature Performance

Fatigue cracking and low-temperature cracking are two major distresses that occur in asphalt pavements. Fatigue cracking is a load-associated distress caused by the tensile stresses at the bottom/top of the asphalt concrete (AC) layer due to repeated traffic loading. On the other hand, low-temperature cracking occurs when tensile stresses built up with in the AC layer at low temperatures exceed the tensile strength of that layer. In this study, the performance of date seeds oil bio-modified asphalt binders (DSO-BMB) is evaluated against fatigue and low-temperature cracking. The DSO-BMBs are prepared using volume ratios of 1.5, 2.5, 3.5, 4.5, and 5.5% date seeds oil-to-asphalt binder. The base asphalt binder used in the study is a 60/70-penetration grade with a Superpave performance grade (PG) of PG 64–16. The dynamic shear rheometer (DSR) standard test was used to assess the fatigue performance of the bio-modified binders (BMBs), while the bending beam rheometer (BBR) test was used to test the BMBs for low-temperature performance. In addition, the DSR linear amplitude sweep (LAS) test was used to evaluate the fatigue tolerance behavior of the DSO-BMBs. The analysis and results of the study showed that the bio-oil enhanced the low-temperature performance. The low PG grade improved from −16 °C for the control asphalt binder to −28 °C for the BMB. Additionally, the fatigue resistance of the BMBs was improved as illustrated by the damage–characteristic curves of the modified asphalt binders from the visco-elastic continuum damage (VECD) analysis and the increase in the number of cycles to fatigue failure (Nf).

scholarly journals How the Mix Factors Affect the Dynamic Modulus of Hot-Mix Asphalt

2019 ◽  
Vol 3 (3) ◽  
pp. 72
Author(s):  
Md Rashadul Islam ◽  
Sylvester A. Kalevela ◽  
Guy Mendel
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Dynamic Modulus ◽  
Hot Mix Asphalt ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Performance Grade ◽  
Reduced Frequency ◽  
Nominal Size ◽  
S 100

Hot-mix asphalt (HMA) is a composite material consisting of stone-aggregates, sand, asphalt binder and additives. The properties of this combined material are dependent on the volumetric parameters used in the mix design. This study investigates the effects of volumetric mix factors on the dynamic moduli (E*) of eleven categories of HMAs. For each category of asphalt mixture, the variations in dynamic modulus for different contractors, binder types, effective binder content (Vbe), air void (Va), voids-in-mineral aggregates (VMA), voids-filled-with asphalt (VFA) and asphalt content (AC) are assessed statistically. Results show that the S(100) mixture (nominal size of 19 mm, 100 gyrations) with the Performance Grade (PG) binder of PG 64-22 has the highest value of E* at low temperature or high reduced frequency. At high temperature or lower reduced frequency, S(100) PG 76-28 has the highest E* value. The SX(75) mixture (nominal size of 12.5 mm, 75 gyrations) with the binder of PG 64-28 has the lowest E* value at high temperature or lower reduced frequency. At low temperature or high reduced frequency, SX(75) PG 58-34 has the lowest E* value. The Stone Mix Asphalt (SMA) mix has a lower E* compared to S(100) and SX(100) mixes ((nominal size of 12.5 mm, 100 gyrations) with the Performance Grade (PG) binder of) at low temperature. The E* increases with an increase in Vbe, Va, and VFA, and decreases with an increase in VMA and AC. The E* of a mix can vary from 200 ksi (1380 MPa) to about 1000 ksi (6900 MPa) for a particular frequency (10 Hz) and temperature (21.1 °C), even if samples are from the same contractor.

Performance Evaluation of Bioengineered Recyled Asphalt Materials

2021 ◽  
pp. 036119812110363
Author(s):  
Ali Arabzadeh ◽  
Joseph H. Podolsky ◽  
Maxwell D. Staver ◽  
R. Christopher Williams ◽  
Austin D. Hohmann ◽  
...  
Keyword(s):  
Low Temperature ◽  
Mechanical Performance ◽  
Elastic Recovery ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Compact Tension ◽  
Performance Grade ◽  
Modified Asphalt Binder ◽  
Low Temperature Cracking ◽  
Wheel Tracking

In this study, asphalt mixtures were engineered with bio-renewable soybean oil-derived modifiers, and then used for pavement demonstration projects in the U.S. states of Iowa and Minnesota in the summer of 2019. The performance grade, elastic recovery (R), and non-recoverable creep compliance (Jnr) of the binders were evaluated. The modification of asphalt binder for the Iowa project almost maintained the high and low temperature grades, and the presence of modifier in the mixture of Minnesota project resulted in a slight decrease in the low temperature grade while maintaining the high temperature grade. The Jnr and R values proved the increase of elasticity and relaxation of the asphalt binder modified for the Iowa project. The Jnr calculated for the Minnesota project revealed a considerable increase in the relaxation of the asphalt binder. Disc-shaped compact tension, Hamburg wheel tracking, and push-pull were the mechanical performance tests performed on the mixtures. Based on the results obtained from these tests, the Iowa mixture, produced with modified asphalt binder, showed a significant improvement in resistance to low-temperature cracking, rutting, moisture damage, and fatigue cracking. The Minnesota mixture, modified in the plant, showed a significant improvement in the fatigue performance and a slight improvement in low-temperature cracking resistance.

The Property Research on Interfacial Modificated Semi-Flexible Pavement Material

2011 ◽  
Vol 71-78 ◽  
pp. 1090-1098
Author(s):  
Yan Yang ◽  
Shao Long Huang ◽  
Qing Jun Ding ◽  
Xin Yan Peng
Keyword(s):  
Shear Strength ◽  
Fatigue Life ◽  
Low Temperature ◽  
Dynamic Modulus ◽  
Stress Ratio ◽  
Flexible Pavement ◽  
Bending Test ◽  
Interfacial Modification ◽  
Dynamic Modulus Test ◽  
Interfacial Modifier

Based on shearing test, bending test in low temperature, fatigue test and dynamic modulus test, the text researched the effect on the property of the semi-flexible pavement by a kind of interfacial modifier. The study showed the feasible content of interfacial modifier was 0.4～0.6% . Used 0.4%, the shear strength reached 1.83MPa, flexural strength 6.97MPa, and fatigue-life was over 40000 at 0.2 stress ratio. From interfacial modification, the synthesis property of semi-flexible pavement was especially perfect.

Sign in / Sign up

Export Citation Format

Share Document