scholarly journals Bond Tests on Clay Bricks and Natural Stone Masonry Externally Bonded with FRP

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7439
Author(s):  
Marianovella Leone ◽  
Maria Antonietta Aiello
Keyword(s):  
Mechanical Properties ◽  
Stress Transfer ◽  
Experimental Results ◽  
Stone Masonry ◽  
Existing Buildings ◽  
Masonry Unit ◽  
Bond Behaviour ◽  
Clay Bricks ◽  
Externally Bonded ◽  
The Stability

Nowadays, the solution of durability problems of existing buildings has a key role in civil engineering, in which there is an ever-increasing need for building restorations. Over the past 50 years, there is a growing interest in a new composite material, fibre-reinforced polymer (FRP), suitable for increasing the resistance and the stability of existing buildings and, consequently, for extending their service life. In this context, the effectiveness of the strengthening system is related to the bond behaviour that is influenced by several parameters such as bond length, the stiffness of the reinforcement, the mechanical properties of the substrate, environmental conditions, etc. This paper aims to analyse the main experimental results from shear tests performed on two kinds of masonry substrates and different types of FRP reinforcements. The purpose is to highlight the role played by many parameters to the bond behaviour of these systems: the mechanical properties of substrates; the stiffness of reinforcements; the type of supports (i.e., unit or masonry unit). The obtained experimental results underlined that the specimens realised with masonry unit show an increase in debonding load and different stress transfer mechanisms along the bonded length with respect to the specimens with a unit substrate. The analysis of the data revealed that the presence of mortar joints cannot be neglected because it influences the interface global performance.

scholarly journals Mechanical Properties of Strengthening 5083-H111 Aluminum Alloy Plates at Elevated Temperatures

2021 ◽  
Vol 6 (6) ◽  
pp. 87
Author(s):  
Wael Abuzaid ◽  
Rami Hawileh ◽  
Jamal Abdalla
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Elastic Modulus ◽  
Yield Strength ◽  
Elevated Temperatures ◽  
Experimental Results ◽  
Analytical Models ◽  
Temperature Sensitive ◽  
Rc Beams ◽  
Externally Bonded

The use of aluminum alloys for external strengthening of reinforced concrete (RC) beams has been capturing research interest. Exposure to harsh environmental conditions can severely impact the strengthening efficiency. This works aims to investigate the degradation in the mechanical properties of aluminum alloy AA 5083 plates when exposed to temperatures ranging from 25 to 300 °C. Quasi-static Isothermal tensile experiments were conducted at different temperatures. It was observed from the experimental results that the yield strength remained constant in the temperature range of 25–150 °C before starting to drop beyond 150 °C, with a total reduction of ≈ 40% at 300 °C. The elastic modulus was temperature sensitive with about 25% reduction at 200 °C before experiencing a significant and pronounced reduction at 300 °C. The percentage drops in stiffness and yield strength at 300 °C were 62.8% and 38%, respectively. In addition, the Mechanical Threshold Strength Model (MTS) parameters were established to capture the yield strength temperature dependence. Two analytical models were developed based on the experimental results. Both models can reasonably predict the elastic modulus and yield strength of AA 5083 plates as a function of temperature. It was concluded that AA plates should be properly insulated when used as externally bonded reinforcement to strengthen RC beams.

An analysis of the transport properties and mechanical stability of rapidly solidified Al-Sb alloy

2015 ◽  
Vol 10 (2) ◽  
pp. 2663-2681
Author(s):  
Rizk El- Sayed ◽  
Mustafa Kamal ◽  
Abu-Bakr El-Bediwi ◽  
Qutaiba Rasheed Solaiman
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Melt Spinning ◽  
Elastic Moduli ◽  
Mechanical Stability ◽  
Microstructural Analysis ◽  
Alloy System ◽  
Antimony Content ◽  
The Stability ◽  
Rapidly Solidified

The structure of a series of AlSb alloys prepared by melt spinning have been studied in the as melt–spun ribbons  as a function of antimony content .The stability  of these structures has  been  related to that of the transport and mechanical properties of the alloy ribbons. Microstructural analysis was performed and it was found that only Al and AlSb phases formed for different composition.  The electrical, thermal and the stability of the mechanical properties are related indirectly through the influence of the antimony content. The results are interpreted in terms of the phase change occurring to alloy system. Electrical resistivity, thermal conductivity, elastic moduli and the values of microhardness are found to be more sensitive than the internal friction to the phase changes. 

Effect of the surface chemistry on the stability and mechanical properties of the Zirconia-Hydroxyapatite bioceramic

2021 ◽  
Vol 23 ◽  
pp. 100980
Author(s):  
M. Es-saddik ◽  
S. Laasri ◽  
M. Taha ◽  
A. Laghzizil ◽  
A. Guidara ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Surface Chemistry ◽  
The Stability

scholarly journals Studies on the Volumetric Stability and Mechanical Properties of Cement-Fly-Ash-Stabilized Steel Slag

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 495
Author(s):  
Mingkai Zhou ◽  
Xu Cheng ◽  
Xiao Chen
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Steel Slag ◽  
Critical Issue ◽  
Expansion Behavior ◽  
Strength Tests ◽  
Road Materials ◽  
Base Course ◽  
The Stability ◽  
Aggregate Base

The stability of steel-slag road materials remains a critical issue in their utilization as an aggregate base course. In this pursuit, the present study was envisaged to investigate the effects of fly ash on the mechanical properties and expansion behavior of cement-fly-ash-stabilized steel slag. Strength tests and expansion tests of the cement-fly-ash-stabilized steel slag with varying additions of fly ash were carried out. The results indicate that the cement-fly-ash-stabilized steel slag exhibited good mechanical properties. The expansion rate and the number of bulges of the stabilized material reduced with an increase in the addition. When the addition of fly ash was 30–60%, the stabilized material was not damaged due to expansion. Furthermore, the results of X-CT, XRD and SEM-EDS show that fly ash reacted with the expansive component of the steel slag. In addition, the macro structure of the stabilized material was found to be changed by an increase in the concentration of the fly ash, in order to improve the volumetric stability. Our study shows that the cement-fly-ash-stabilized steel slag exhibits good mechanical properties and volumetric stability with reasonable additions of fly ash.

scholarly journals A Review on Mechanical Properties of Natural Fibre Reinforced Polymer Composites under Various Strain Rates

2021 ◽  
Vol 5 (5) ◽  
pp. 130
Author(s):  
Tan Ke Khieng ◽  
Sujan Debnath ◽  
Ernest Ting Chaw Liang ◽  
Mahmood Anwar ◽  
Alokesh Pramanik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Polymer Composites ◽  
Stress Transfer ◽  
Natural Fibre ◽  
Transfer Efficiency ◽  
Strain Rates ◽  
Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Fibre Matrix

With the lightning speed of technological evolution, the demand for high performance yet sustainable natural fibres reinforced polymer composites (NFPCs) are rising. Especially a mechanically competent NFPCs under various loading conditions are growing day by day. However, the polymers mechanical properties are strain-rate dependent due to their viscoelastic nature. Especially for natural fibre reinforced polymer composites (NFPCs) which the involvement of filler has caused rather complex failure mechanisms under different strain rates. Moreover, some uneven micro-sized natural fibres such as bagasse, coir and wood were found often resulting in micro-cracks and voids formation in composites. This paper provides an overview of recent research on the mechanical properties of NFPCs under various loading conditions-different form (tensile, compression, bending) and different strain rates. The literature on characterisation techniques toward different strain rates, composite failure behaviours and current challenges are summarised which have led to the notion of future study trend. The strength of NFPCs is generally found grow proportionally with the strain rate up to a certain degree depending on the fibre-matrix stress-transfer efficiency. The failure modes such as embrittlement and fibre-matrix debonding were often encountered at higher strain rates. The natural filler properties, amount, sizes and polymer matrix types are found to be few key factors affecting the performances of composites under various strain rates whereby optimally adjust these factors could maximise the fibre-matrix stress-transfer efficiency and led to performance increases under various loading strain rates.

scholarly journals Effect of Photoinitiator on Precursory Stability and Curing Depth of Thiol-Ene Clickable Gelatin

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1877
Author(s):  
Kai-Hung Yang ◽  
Gabriella Lindberg ◽  
Bram Soliman ◽  
Khoon Lim ◽  
Tim Woodfield ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Visible Light ◽  
Rheological Properties ◽  
Swelling Ratio ◽  
Sodium Persulfate ◽  
Photo Polymerization ◽  
Gelation Kinetics ◽  
The Stability ◽  
Over Time

Recent advances highlight the potential of photopolymerizable allylated gelatin (GelAGE) as a versatile hydrogel with highly tailorable properties. It is, however, unknown how different photoinitiating system affects the stability, gelation kinetics and curing depth of GelAGE. In this study, sol fraction, mass swelling ratio, mechanical properties, rheological properties, and curing depth were evaluated as a function of time with three photo-initiating systems: Irgacure 2959 (Ig2959; 320–500 nm), lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP; 320–500 nm), and ruthenium/sodium persulfate (Ru/SPS; 400–500 nm). Results demonstrated that GelAGE precursory solutions mixed with either Ig2959 or LAP remained stable over time while the Ru/SPS system enabled the onset of controllable redox polymerization without irradiation during pre-incubation. Photo-polymerization using the Ru/SPS system was significantly faster (<5 s) compared to both Ig2959 (70 s) and LAP (50 s). Plus, The Ru/SPS system was capable of polymerizing a thick construct (8.88 ± 0.94 mm), while Ig2959 (1.62 ± 0.49 mm) initiated hydrogels displayed poor penetration depth with LAP (7.38 ± 2.13 mm) in between. These results thus support the use of the visible light based Ru/SPS photo-initiator for constructs requiring rapid gelation and a good curing depth while Ig2959 or LAP can be applied for photo-polymerization of GelAGE materials requiring long-term incubation prior to application if UV is not a concern.

Analysis and Test on Mechanical Properties of a Flexible Suspension Bridge

2013 ◽  
Vol 405-408 ◽  
pp. 1616-1622
Author(s):  
Guo Hui Cao ◽  
Jia Xing Hu ◽  
Kai Zhang ◽  
Min He
Keyword(s):  
Mechanical Properties ◽  
Suspension Bridge ◽  
Experimental Results ◽  
Suspension Bridges ◽  
Loading Test ◽  
Main Cable ◽  
Element Simulation ◽  
Static Loading Test ◽  
Geometric Nonlinear Analysis ◽  
Test Process

In order to research on mechanical properties of flexible suspension bridges, a geometric nonlinear analysis method was used to simulate on the experimental results, and carried on static loading test finally. In the loading test process, the deformations were measured in critical section of the suspension bridge, and displacement values of measured are compared with simulation values of the finite element simulation. Meanwhile the deformations of the main cable sag are observed under classification loading, the results show that the main cable sag increment is basically linear relationship with the increment of mid-span loading and tension from 3L/8 and 5L/8 to L/2 section, the main cable that increasing unit sag required mid-span loads and tension are gradually reduce in near L/4 and 3L/4 sections and gradually increase in near L/8 and 7L/8 sections and almost equal in near L/2, 3L/8 and 5L/8 sections. From the experimental results, the flexible suspension bridge possess good mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document