scholarly journals Effect of 2% Chlorhexidine Following Acid Etching on Microtensile Bond Strength of Resin Restorations: A Meta-Analysis

Medicina ◽  
2019 ◽  
Vol 55 (12) ◽  
pp. 769 ◽  
Author(s):  
Tasnim Hamdan-Nassar ◽  
Carlos Bellot-Arcís ◽  
Vanessa Paredes-Gallardo ◽  
Verónica García-Sanz ◽  
Agustín Pascual-Moscardó ◽  
...  

Background and Objectives: The aim of this systematic review was to examine the effect of 2% chlorhexidine following acid etching on the microtensile bond strength of resin restorations for different follow-up times. Materials and Methods: A thorough search of PubMed, Scopus, and Embase databases were conducted. In vitro experimental studies or in vivo studies published up to December 2018 with an experimental group treated with a 2% chlorhexidine solution following acid etching and a control group were included, wherein the final restoration used a resin composite in both the groups. Results: Twenty-one articles were identified for qualitative analysis and 18 for meta-analysis. The difference in the means of microtensile bond strength between the two groups was calculated for the different follow-up times. The differences were significant for 6 months (4.30 MPa; 95% CI 2.72–5.89), 12 months (8.41 MPa; 95% CI 4.93–11.88), and 2–5 years including aged and thermocycling samples (9.08 MPa; 95% CI 5.36–12.81). There were no significant differences for the type of adhesive used. A meta-regression model showed a significant effect of time on the microtensile bond strength. Conclusions: The application of a 2% chlorhexidine solution after acid etching increased the microtensile bond strength significantly for follow-up times of 6 months or more. The adhesive type had no influence.

10.2341/07-69 ◽  
2008 ◽  
Vol 33 (2) ◽  
pp. 183-188 ◽  
Author(s):  
C. J. Soares ◽  
C. A. Pereira ◽  
J. C. Pereira ◽  
F. R. Santana ◽  
C. J. Prado

Clinical Relevance Based on the results of this study, the application of chlorhexidine solution at a concentration of 0.12 and 2% before, after or associated with phosphoric acid etching, presented similar behavior with no adverse effect on 24-hour bond strength.


Author(s):  
Li Wang ◽  
Yiwen Zhang ◽  
Jiajun Zhong ◽  
Yuan Zhang ◽  
Shuisheng Zhou ◽  
...  

Objective: The efficacy of mesenchymal stem cell (MSC) therapy in acetaminophen-induced liver injury has been investigated in animal experiments, but individual studies with a small sample size cannot be used to draw a clear conclusion. Therefore, we conducted a systematic review and meta-analysis of preclinical studies to explore the potential of using MSCs in acetaminophen-induced liver injury. Methods: Eight databases were searched for studies reporting the effects of MSCs on acetaminophen hepatoxicity. The Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines were used. SYRCLE’s risk of bias tool for animal studies was applied to assess the methodological quality. A meta-analysis was performed by using RevMan 5.4 and STATA/SE 16.0 software. Results: Eleven studies involving 159 animals were included according to PRISMA statement guidelines. Significant associations were found for MSCs with the levels of alanine transaminase (ALT) (standardized mean difference (SMD) − 2.58, p < 0.0001), aspartate aminotransferase (AST) (SMD − 1.75, p = 0.001), glutathione (GSH) (SMD 3.7, p < 0.0001), superoxide dismutase (SOD) (SMD 1.86, p = 0.022), interleukin 10 (IL-10) (SMD 5.14, p = 0.0002) and tumor necrosis factor-α (TNF-α) (SMD − 4.48, p = 0.011) compared with those in the control group. The subgroup analysis showed that the tissue source of MSCs significantly affected the therapeutic efficacy (p < 0.05). Conclusion: Our meta-analysis results demonstrate that MSCs could be a potential treatment for acetaminophen-related liver injury.


2016 ◽  
Vol 51 (2) ◽  
pp. 124-137
Author(s):  
Sergi Barrera-Ochoa ◽  
Irene Gallardo-Calero ◽  
Andrea Sallent ◽  
Alba López-Fernández ◽  
Ramona Vergés ◽  
...  

The aim is to create a new and safe experimental model of radiation-induced neurovascular histological changes with reduced morbidity and mortality for use with experimental microsurgical techniques. Seventy-two Sprague–Dawley rats (250–300 g) were divided as follows: Group I: control group, 24 rats clinically evaluated during six weeks; Group II: evaluation of acute side-effects (two-week follow-up period), 24 irradiated (20 Gy) rats; and Group III: evaluation of subacute side-effects (six-week follow-up period), 24 irradiated (20 Gy) rats. Variables included clinical assessments, weight, vascular permeability (arterial and venous), mortality and histological studies. No significant differences were observed between groups with respect to the variables studied. Significant differences were observed between groups I vs II–III regarding survival rates and histological changes to arteries, veins and nerves. Rat body weights showed progressive increases in all groups, and the mortality rate of the present model is 10.4% compared with 30–40% in the previous models. In conclusion, the designed model induces selective changes by radiotherapy in the neurovascular bundle without histological changes affecting the surrounding tissues. This model allows therapeutic experimental studies to be conducted, including the viability of microvascular and microneural sutures post radiotherapy in the cervical neurovascular bundle.


2021 ◽  
Author(s):  
Rajesh Kumar ◽  
Ravi Kant ◽  
Poonam Yadav ◽  
Tamar Rodney ◽  
Mukesh Bairwa

Abstract BackgroundThe burden of tobacco-associated disorders is prevalent worldwide. Over the years, many innovative internet-based approaches have been utilized with variable success to quit tobacco. Though the effectiveness of internet-based and face-to-face interventions on quitting smoking are very well reported in the literature, due to limitation in methodology and limited sample size, it is required to integrate and analyze these studies' findings to reach a single conclusion. The study evaluated the effectiveness of the internet as an intervention approach versus face-to-face interaction on reducing tobacco use as control among adults.MethodsA systematic search was performed through various electronic databases such as Medline, PsychInfo, PubMed, Embase, Cochrane Central Register of Controlled Trials (CENTRAL), ResearchGate, Google Scholar, and Academia. Reference lists of the eligible articles were also screened. Full-text articles were included as per eligibility criteria (PICO framework). No ethnicity restriction was applied.ResultsA total of 13 studies were selected for meta-analysis, with 3852 and 3908 participants in intervention and control groups respectively. Forest plot favours the intervention group at one month follow up for tobacco quitting (OR: 2.37, CI: 1.86-3.02, P-0.00001, I2 =0%), at three months (OR: 1.88, CI: 1.48-2.40, P-0.00001, I2 =42%) at six months (OR: 2.02, CI: 1.64-2.50, P-0.00001, I2 =38%) and at 1 year of follow-up (OR: 1.43, CI: 1.18-1.74, P-0.00001, I2 = 36%) comparing to control group. ConclusionInternet and web-based interventions are highly useful in tobacco quitting at one month, three months, six months, and one year of follow-up compared to face-to-face interaction or no intervention, although the level of evidence was moderate. Additionally, limited availability of trials in developing countries, arising need for research of internet use in developing countries to quit tobacco. Prospero Registration number- PROSPERO 2020 CRD42020214306


2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Spartak Spasov Yanakiev ◽  
Mirela Borislavova Marinova-Takorova

A four-year follow-up of a novel silane heat treatment method for bonding lithium disilicate overlays to tooth structures without hydrofluoric acid etching of the ceramic surface is presented in this case report. Silane heat treatment modifies the silane layer and thus enhances resin ceramic bond strength without hydrofluoric acid etching. The standard ceramic preparation technique prior to bonding silicate ceramics to tooth structure is hydrofluoric acid etching and applying a silane coupling agent, followed by dental adhesive. In this case, the micromechanical roughening of the ceramic surface was performed by air abrasion with Al2O3. Silane heat treatment with constant 120°C airflow, applied for 60 sec, followed by dental adhesive application enhanced the resin-ceramic bond strength. After a four-year follow-up, the restorations’ clinical appearance could be defined as excellent/very good according to the FDI clinical criteria for the evaluation of direct and indirect restorations. This clinical result supports many in vitro studies regarding the resin-ceramic bond strength and durability obtained through postsilanization heat treatment.


2020 ◽  
Vol 8 (D) ◽  
pp. 112-117
Author(s):  
Ayah Atif Selim ◽  
Ahmed Fawzy Abo Elezz ◽  
Rehab Khalil Safy

AIM: Investigation of the aging effect on the microtensile bond strength (μTBS) of bulk-fill resin composite (RC) versus a conventionally incrementally applied one. MATERIALS AND METHODS: A total number of 45 sound human impacted third molars extracted molars have been selected to prepare specimens for the μTBS test. Teeth were randomly divided into three groups (C) according to type of RC material which used for restoring the teeth. Where nanohybrid RC (Grandio®SO) was used as the control Group (C1), packable bulk-fill RC (X-tra fil®) was used for restoring teeth in C2 group and flowable bulk-fill RC (X-tra base®) was used for restoring teeth in C3 group. Each group was further subdivided into 3 subgroups (n = 5) according to the water storage time, where in subgroup 1; teeth were stored for 24 h, subgroup 2; teeth were stored for 3 months while for subgroup 3; and teeth were stored for 6 months. After water storage, teeth were sectioned for preparation of μTBS testing beams. Maximum tensile stresses were recorded in megapascal (MPa). RESULTS: After 24 h of water storage, the X-tra base® showed a higher statistically significant μTBS to dentin (33.82 ± 9.84 MPa) than did the other two types of RCs. After 3 months, the X-tra fil® showed the lowest mean value of μTBS (10.90 ± 5.66 MPa), meanwhile, after 6 months of water storage Grandio®SO showed the highest mean value of μTBS (15.85 ± 6.76 MPa). Regardless of the time the X-tra fil® showed the lowest mean of μTBS (15.07 ± 11.73 MPa), while there is no significant difference between the X-tra base® and Grandio®SO. Furthermore, the water aging adversely affects μTBS values which deceased gradually by time. CONCLUSION: The packable bulk-fill RC characterized by lower μTBS to dentin in comparison to the flowable bulk fill and the incrementally applied nanohybrid RCs. Furthermore, the μTBS of the three tested materials decreased gradually by aging.


2008 ◽  
Vol 22 (4) ◽  
pp. 352-357 ◽  
Author(s):  
Fernanda Ribeiro Santana ◽  
Janaína Carla Pereira ◽  
Cristina Alves Pereira ◽  
Alfredo Júlio Fernandes Neto ◽  
Carlos José Soares

2009 ◽  
Vol 44 (6) ◽  
pp. 663-665 ◽  
Author(s):  
Tamara C. Valovich McLeod

Abstract Reference/Citation: Broglio SP, Puetz TW. The effect of sport concussion on neurocognitive function, self-report symptoms, and postural control: a meta-analysis. Sports Med. 2008;38(1):53–67. Clinical Question: How effective are various concussion assessment techniques in detecting the effects of concussion on cognition, balance, and symptoms in athletes? Data Sources: Studies published between January 1970 and June 2006 were identified from the PubMed and PsycINFO databases. Search terms included concussion, mild traumatic brain injury, sport, athlete, football, soccer, hockey, boxing, cognition, cognitive impairment, symptoms, balance, and postural control. The authors also handsearched the reference list of retrieved articles and sought the opinions of experts in the field for additional studies. Study Selection: Studies were included if they were published in English; described a sample of athletes concussed during athletic participation; reported outcome measures of neurocognitive function, postural stability, or self-report symptoms; compared the postconcussion assessments with preseason (healthy) baseline scores or a control group; completed at least 1 postinjury assessment within the first 14 days after the concussion (to reflect neurometabolic recovery); and provided enough information for the authors to calculate effect sizes (means and SDs at baseline and postinjury time points). Selected studies were grouped according to their outcome measure (neurocognitive function, symptoms, or postural control) at initial and follow-up (if applicable) time points. Excluded articles included review articles, abstracts, case studies, editorials, articles without baseline data, and articles with data extending beyond the 14-day postinjury time frame. Data Extraction: From each study, the following information was extracted by one author and checked by the second author: participant demographics (sport, injury severity, incidence of loss of consciousness, and postconcussion assessment times), sample sizes, and baseline and postconcussion means and SDs for all groups. All effect sizes (the Hedge g) were computed so that decreases in neurocognitive function and postural control or increases in symptom reports resulted in negative effect sizes, demonstrating deficits in these domains after concussion. The authors also extracted the following moderators: study design (with or without control group), type of neurocognitive technique (Standardized Assessment of Concussion, computerized test, or pencil-and-paper test), postconcussion assessment time, and number of postconcussion assessments. Main Results: The search identified 3364 possible abstracts, which were then screened by the authors, with 89 articles being further reviewed for relevancy. Fifty articles were excluded because of insufficient data to calculate effect sizes, lack of a baseline assessment or control group, or because the data had been published in more than one study. The remaining 39 studies met all of the inclusion criteria and were used in the meta-analysis; 34 reported neurocognitive outcome measures, 14 provided self-report symptom outcomes, and 6 presented postural control as the dependent variable. The analyzed studies included 4145 total participants (concussed and control) with a mean age of 19.0 ± 0.4 years. The quality of each included study was also evaluated by each of the 2 authors independently using a previously published 15-item scale; the results demonstrated excellent agreement between the raters (intraclass correlation coefficient  =  0.91, 95% confidence interval [CI]  =  0.83, 0.95). The quality appraisal addressed randomization, sample selection, outcome measures, and statistical analysis, among other methodologic considerations. Quality scores of the included studies ranged from 5.25 to 9.00 (scored from 0–15). The initial assessment demonstrated a deficit in neurocognitive function (Z  =  7.73, P &lt; .001, g  =  −0.81 [95% CI  =  −1.01, −0.60]), increase in self-report symptoms (Z  =  2.13, P  =  .03, g  =  −3.31 [95% CI  =  −6.35, −0.27]), and a nonsignificant decrease in postural control (Z  =  1.29, P  =  .19, g  =  −2.56 [95% CI  =  −6.44, 1.32]). For the follow-up assessment analyses, a decrease in cognitive function (Z  =  2.59, P  =  .001, g  =  −26 [95% CI  =  −0.46, −0.06]), an increase in self-report symptoms (Z  =  2.17, P  =  .03, g  =  −1.09 [95% CI  =  −2.07, −0.11]), and a nonsignificant decrease in postural control (Z  =  1.59, P  =  0.11, g  =  −1.16 [95% CI  =  −2.59, 0.27]) were found. Neurocognitive and symptom outcomes variables were reported in 10 studies, and the authors were able to compare changes from baseline in these measures during the initial assessment time point. A difference in effect sizes was noted (QB(1)  =  5.28, P  =  .02), with the increases in self-report symptoms being greater than the associated deficits in neurocognitive function. Conclusions: Sport-related concussion had a large negative effect on cognitive function during the initial assessment and a small negative effect during the first 14 days postinjury. The largest neurocognitive effects were found with the Standardized Assessment of Concussion during the immediate assessment and with pencil-and-paper neurocognitive tests at the follow-up assessment. Large negative effects were noted at both assessment points for postural control measures. Self-report symptoms demonstrated the greatest changes of all outcomes variables, with large negative effects noted both immediately after concussion and during the follow-up assessment. These findings reiterate the recommendations made to include neurocognitive measures, postural control tests, and symptom reports into a multifaceted concussion battery to best assess these injuries.


Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2902
Author(s):  
Phoebe Burrer ◽  
Hoang Dang ◽  
Matej Par ◽  
Thomas Attin ◽  
Tobias T. Tauböck

This study investigated the effect of over-etching and prolonged application time of a universal adhesive on dentin bond strength. Ninety extracted human molars were ground to dentin and randomly allocated into nine groups (G1–9; n = 10 per group), according to the following acid etching and adhesive application times. In the control group (G1), phosphoric acid etching was performed for 15 s followed by application of the universal adhesive Scotchbond Universal (3M) for 20 s, as per manufacturer’s instructions. In groups G2–5, both the etching and adhesive application times were either halved, doubled, quadrupled, or increased eightfold. In groups G6–9, etching times remained the same as in G2–5 (7.5 s, 30 s, 60 s, and 120 s, respectively), but the adhesive application time was set at 20 s as in the control group (G1). Specimens were then restored with a nanofilled composite material and subjected to microtensile bond strength testing. Bond strength data were statistically analyzed by ANOVA and Tukey’s post-hoc tests (α = 0.05). The relationship of bond strength with etching and adhesive application time was examined using linear regression analysis. Treatment of dentin with halved phosphoric acid etching and adhesive application times (G2) resulted in a significant bond strength decrease compared to the control group (G1) and all other test groups, including the group with halved acid etching, but 20 s of adhesive application time (G6). No significant differences in bond strength were found for groups with multiplied etching times and an adhesive application time of 20 s or more, when compared to the control group (G1). In conclusion, a universal adhesive application time of at least 20 s is recommended when bonding to over-etched dentin.


2013 ◽  
Vol 18 (4) ◽  
pp. 98-103 ◽  
Author(s):  
Alexandre Antonio Ribeiro ◽  
Ariane Vicente de Morais ◽  
Daniel Paludo Brunetto ◽  
Antonio Carlos de Oliveira Ruellas ◽  
Monica Tirre Souza de Araujo

INTRODUCTION: Orthodontic patients frequently present composite resin restorations, however there are few studies that evaluate the best way for orthodontic bonding in this situation. OBJECTIVE: The objective of this work was to evaluate the bond strength of orthodontic brackets in resin restorations with surface treatment. METHODS: Fifty one bovine lower incisors were randomly divided into three groups. On the control group (CG) the brackets were bonded to dental enamel; on experimental groups, brackets were bonded to resin restoration with diamond drill treatment (EGT) and with no treatment (EGN). The teeth were placed in PVC tubes with autopolymerized acrylic resin. The shear test was performed in EMIC universal testing machine. The groups were submitted to ANOVA analysis of variance with Tukey post test to verify the statistical difference between groups (α = 0.05). RESULTS: CG (6.62 MPa) and EGT (6.82 MPa) groups presented similar results, while EGN (5.07 MPa) obtained statistically lower results (p < 0.05). CONCLUSION: Therefore, it is concluded that the best technique for bonding of orthodontic brackets on composite resin restorations is the performance of surface detritions.


Sign in / Sign up

Export Citation Format

Share Document