scholarly journals Magnetic/Polyetherimide-Acrylonitrile Composite Nanofibers for Nickel Ion Removal from Aqueous Solution

Membranes ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 50
Author(s):  
Muhammad Omer Aijaz ◽  
Mohammad Rezaul Karim ◽  
Hamad F. Alharbi ◽  
Nabeel H. Alharthi ◽  
Fahad S. Al-Mubaddel ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Nanofiber Membrane ◽  
Nickel Ion ◽  
Nickel Ions ◽  
X Ray ◽  
Ion Removal ◽  
Composite Nanofiber ◽  
Pseudo Second Order

In this study, a magnetic/polyetherimide-acrylonitrile composite nanofiber membrane with effective adsorption of nickel ions in an aqueous solution was created using a simple electrospinning method. Iron oxide nanoparticles (NPs) were stirred and ultrasonically dispersed into a polyetherimide-acrylonitrile solution to create a homogenous NPs suspension, which was placed in an electrospinning machine to produce a uniform and smooth nanofiber composite membrane. Nanoparticle incorporation into this membrane was confirmed using scanning electron microscope, energy dispersive X-ray spectroscopy (EDX), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and NPs aqueous stability from a leaching test. The high adsorption capability of the membrane on nickel ions was attributed to the combination of magnetic NPs, polyetherimide-acrylonitrile matrix, and the nanostructure of the membrane. A membrane containing magnetic NPs demonstrated the maximum adsorption capabilities (102 mg/g) of nickel ions in an aqueous solution. Various kinetic and isotherm models were applied to understand the adsorption behavior, such as pseudo-second-order kinetic and Langmuir isotherm models. A polyetherimide-acrylonitrile composite nanofiber membrane containing magnetic NPs could be used as an environmentally friendly and nontoxic adsorbent for the removal of nickel ions in an aqueous medium due to its ease of preparation and use and stability in aqueous mediums.

scholarly journals Fabrication of Amino Functionalized Magnetic Expanded Graphite Nanohybrids for Application in Removal of Ag(I) from Aqueous Solution

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Ying-Xia Ma ◽  
Yong-Xin Ruan ◽  
Dan Xing ◽  
Xue-Yan Du ◽  
Pei-Qing La
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Expanded Graphite ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
One Pot ◽  
X Ray ◽  
Pseudo Second Order

Ethylenediamine functionalized magnetic expanded graphite decorated with Fe3O4 nanoparticles (MEG-NH2) was fabricated by one-pot solvothermal method. The as-prepared MEG-NH2 nanohybrids were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and Zeta potential analyzer. The effects of Fe3O4 content in MEG-NH2 nanohybrids, pH, initial concentration, contact time, and dosage on adsorption properties of the MEG-NH2 nanohybrids for Ag(I) from aqueous solution were investigated by batch experiments. The pseudo-first-order and the pseudo-second-order kinetic models were utilized to study adsorption kinetics. The experimental data was also analyzed with Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models. The results show that Ag(I) was reduced to silver in the process of the adsorption by MEG-NH2 nanohybrids; the experimental data was better fitted to pseudo-second-order model and Langmuir isotherm model which revealed that the adsorption process was a chemical adsorption by the formation of silver on the surface of MEG-NH2 nanohybrids.

Adsorption Characteristics of Phenol in Aqueous Solution by Pinus massoniana Biochar

2013 ◽  
Vol 295-298 ◽  
pp. 1154-1160 ◽  
Author(s):  
Guo Zhi Deng ◽  
Xue Yuan Wang ◽  
Xian Yang Shi ◽  
Qian Qian Hong
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Pinus Massoniana ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Salt Ions ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The objective of this paper is to investigate the feasibility of phenol adsorption from aqueous solution by Pinus massoniana biochar. Adsorption conditions, including contact time, initial phenol concentration, adsorbent dosage, strength of salt ions and pH, have been investigated by batch experiments. Equilibrium can be reached in 24 h for phenol from 50 to 250 mg• L-1. The optimum pH value for this kind of biochar is 5.0. The amount of phenol adsorbed per unit decreases with the increase in adsorbent dosage. The existence of salt ions makes negligible influence on the equilibrium adsorption capacity. The experimental data is analyzed by the Freundlich and Langmuir isotherm models. Equilibrium data fits well to the Freundlich model. Adsorption kinetics models are deduced and the pseudo-second-order kinetic model provides a good correlation for the adsorbent process. The results show that the Pinus massoniana biochar can be utilized as an effective adsorption material for the removal of phenol from aqueous solution.

Photocatalytic removal of nitrate using TiO2/polyacrylonitrile nanofiber membrane synthesized by co-electrospinning process

2014 ◽  
Vol 14 (4) ◽  
pp. 554-560 ◽  
Author(s):  
S. P. Suriyaraj ◽  
M. Benasir Begam ◽  
S. G. Deepika ◽  
P. Biji ◽  
R. Selvakumar
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Tio2 Nanoparticles ◽  
Nitrate Removal ◽  
Electrospinning Process ◽  
Order Kinetic ◽  
Nanofiber Membrane ◽  
Electrospinning Technique ◽  
X Ray ◽  
Pan Nanofiber

The present study investigates the development of titanium dioxide (TiO2)/polyacrylonitrile (PAN) nanofiber membrane for the removal of nitrate from aqueous solution by photocatalysis. The TiO2 nanoparticles were synthesized by conventional sol–gel method followed by blending them into PAN polymer. The blended solution was electrospun into nanofiber using the co-electrospinning technique. The nanoparticle, PAN nanofibers and the TiO2 impregnated nanofibers were characterized using suitable techniques like X-ray diffraction, high-resolution transmission electron microscopy and scanning electron microscopy attached with energy dispersive X-ray spectroscopy. The average size and the diameter of the TiO2 nanoparticles and TiO2/PAN nanofibers were found to be 22 ± 0.32 nm and 90 ± 15 nm respectively. TiO2 nanoparticles and TiO2/PAN nanofibers showed maximum nitrate removal of 74.67 and 39% respectively at 10 mg/L nitrate concentration at pH 4. However at higher concentration (50 mg/L), the nitrate removal was found to be only 16.87%. The experimental data were fitted onto pseudo second-order kinetic model. The impregnation of TiO2 nanoparticles into the PAN nanofibers by co-electrospinning techniques lead to higher removal of nitrate in aqueous solution at lower concentration (10 mg/L and below). However at higher concentration, the TiO2/PAN nanofiber membrane was inefficient to remove nitrate.

scholarly journals Mechanosynthesis of MFe2O4 (M = Co, Ni, and Zn) Magnetic Nanoparticles for Pb Removal from Aqueous Solution

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
America R. Vazquez-Olmos ◽  
Mohamed Abatal ◽  
Roberto Y. Sato-Berru ◽  
G. K. Pedraza-Basulto ◽  
Valentin Garcia-Vazquez ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Xrd Analysis ◽  
Maximum Adsorption Capacity ◽  
Sorption Behavior ◽  
Order Kinetic ◽  
X Ray ◽  
Isotherm Adsorption ◽  
Crystallite Sizes ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Adsorption of Pb(II) from aqueous solution using MFe2O4 nanoferrites (M = Co, Ni, and Zn) was studied. Nanoferrite samples were prepared via the mechanochemical method and were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), micro-Raman, and vibrating sample magnetometry (VSM). XRD analysis confirms the formation of pure single phases of cubic ferrites with average crystallite sizes of 23.8, 19.4, and 19.2 nm for CoFe2O4, NiFe2O4, and ZnFe2O4, respectively. Only NiFe2O4 and ZnFe2O4 samples show superparamagnetic behavior at room temperature, whereas CoFe2O4 is ferromagnetic. Kinetics and isotherm adsorption studies for adsorption of Pb(II) were carried out. A pseudo-second-order kinetic describes the sorption behavior. The experimental data of the isotherms were well fitted to the Langmuir isotherm model. The maximum adsorption capacity of Pb(II) on the nanoferrites was found to be 20.58, 17.76, and 9.34 mg·g−1 for M = Co, Ni, and Zn, respectively.

Thermal Activation of Brazilian Smectite Clay (Primavera) and its Application for the Removal of Cadmium from Aqueous Solution

2020 ◽  
Vol 07 ◽  
Author(s):  
Marta Lígia Pereira da Silva ◽  
Tellys Lins Almeida Barbosa ◽  
Meiry Gláucia Freire Rodrigues
Keyword(s):  
Aqueous Solution ◽  
Kinetic Constant ◽  
Second Order ◽  
Order Kinetic ◽  
Experimental Conditions ◽  
X Ray ◽  
Thermally Activated ◽  
Study Results ◽  
Water Cleaning ◽  
Pseudo Second Order

Background: Region-based solutions for water cleaning could be critical to tackle the water challenges faced in enhancing the in the future. Brazilian Primavera clay is cheap, abundant, and an untested material that has the potential to be used for water cleaning. Objective: the objective of the present work was to thermally activate and characterize the Brazilian clay and then determine the potential to remove Cd2+ from an aqueous solution. Methods: Primavera clay was thermally activated at 300 oC and characterized using X ray diffraction, X-ray Spectroscopy Energy Dispersive, and N2 adsorption. Sorption equilibrium was determined using the following experimental conditions: constant pH 4.5, 5 h, and 27 oC. Langmuir, Freundlich, Dubinin-Radushkevich and Temkin isotherms models were applied in order to determine the efficiency of clay used as an adsorbent. Adsorption kinetics was analyzed using the pseudo-second-order kinetic model. Results: In this study, results revealed that even though the heat treatment did not cause profound alterations on the clay structure(smectite) and surface area (78 m2 /g), a pseudo-second-order kinetic constant of 0.5563 mg/g/min was found for the cadmium removal. Conclusion: The mathematical models of the Langmuir and Temkin showed a better fit to the experimental data. A high affinity between the cadmium and the thermally activated Primavera clay was found up to 88 % with removal efficiencies.

Preparation of copper aluminum-biochar composite as adsorbent of malachite green in aqueous solution

2020 ◽  
Author(s):  
Neza Rahayu Palapa ◽  
Tarmizi Taher ◽  
Risfidian Mohadi ◽  
Addy Rachmat ◽  
Aldes Lesbani
Keyword(s):  
Aqueous Solution ◽  
Composite Material ◽  
Malachite Green ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Pseudo Second Order ◽  
Edx Analyses ◽  
Copper Aluminum ◽  
Regeneration Study

Abstract In this work, CuAl/Biochar (BC) composite was prepared by the coprecipitation method. The materials were applied to remove malachite green in aqueous solution. These materials were characterized using XRD, FTIR, BET and SEM-EDX analyses. The composite material was confirmed by X-ray diffractograms with reflection (002) at 24o and the appearance of new peaks at 1095 cm -1 . The BET result of CuAl/BC composite has larger surface area is 168 m 2 /g than 46 m 2 /g for LDH. The morphologies of composite materials show agglomeration and micro particle size. The result of the adsorption study indicated the composite material follows pseudo-second-order (PSO) and Langmuir isotherm models. The maximum adsorption capacity of malachite green using CuAl/BC uptake is 164.316 mg/g. The thermodynamic analysis indicates that the malachite green adsorption is spontaneous, endothermic. Regeneration study of adsorbent CuAl/BC composite shows after four times reused, it still has high removal efficiency at 89%.

Preparation of titanate nanoflower for sorption of 75Se(IV) radioisotope from aqueous solution: Equilibrium, kinetic and thermodynamic studies

2015 ◽  
Vol 103 (12) ◽  
Author(s):  
Sahar El-Sayed Abd El-Kader Sharaf El-Deen ◽  
Karam Fatwhi Allan ◽  
Mohamed Holeil ◽  
Gehan El-Sayed Abd El-Kader Sharaf El-Deen
Keyword(s):  
Aqueous Solution ◽  
Electrostatic Interactions ◽  
Outer Sphere ◽  
Solution Temperature ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
X Ray ◽  
Adsorptive Removal ◽  
Order Kinetic Model

AbstractIn this study, the adsorptive removal of selenium (IV) from aqueous solution by titanate nanoflower (TNF) was prepared via alkaline hydrothermal method. The morphology and crystal phase of the TNF were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscope (EDX), selected area electron diffraction (SAED), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR) and specific surface area. This study was conducted to determine the influence of various operating parameters such as pH, adsorbate weight, initial anion concentration, contact time and solution temperature on the adsorptive removal of selenium (IV). Equilibrium adsorption data were analyzed using Freundlich, Langmuir and Dubinin–Radushkevich (D–R) isotherm models. The results demonstrated that the adsorption was well described by the Langmuir adsorption isotherm with the maximum adsorption capacity up to 46.52 mg/g at pH 3.5. The adsorption of Se(IV) anions onto the surface of TNF may proceed through outer sphere electrostatic interactions and/or inner-sphere complexation interaction. The kinetic data indicated that the adsorption fit well with the pseudo-second-order kinetic model. The thermodynamic parameters implied that the adsorption process was spontaneous and endothermic in nature.

Chiral poly(amide-imide)/ZnS nanocomposite as a new adsorbent for simultaneous removal of cationic dyes from aqueous solution

2020 ◽  
pp. 095400832093914
Author(s):  
Maryam Sadeghi ◽  
Zahra Rafiee
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
High Efficiency ◽  
Second Order ◽  
Isotherm Models ◽  
Simultaneous Removal ◽  
Base Interaction ◽  
X Ray ◽  
Operational Variables ◽  
Pseudo Second Order

A new adsorbent, poly(amide-imide)/zinc sulfide nanocomposite (PAI/ZnS NC), was fabricated and identified by Fourier-transform infrared spectroscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, field emission-scanning electron microscopy, and transmission electron microscopy. Then, the obtained NC was applied for the simultaneous removal of auramine O (AO) and rhodamine B (RB) dyes from aqueous solution via the interactions of hydrogen bonding, π– π stacking, and Lewis acid–base interaction. The effects of operational variables including pH, PAI/ZnS NC mass, AO and RB concentration, and sonication time on removal efficiency were examined and optimized values were found to be 8.0, 16 mg, 11 mg L−1, and 6 min, respectively. The adsorption capacities of PAI/ZnS NC for the removal of AO and RB dyes were found to be 70.92 and 91.74 mg g−1, respectively. Ultraviolet–visible spectrophotometer was used to determine the amount of residual dye in solution. Fitting the experimental equilibrium data to isotherm models such as Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich reveals the suitability of the Langmuir model with high correlation coefficients ( R 2 = 0.998 for AO and R 2 = 0.999 for RB). Pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich kinetic models applicability was tested and the pseudo-second-order equation controls the kinetics of the adsorption process. Furthermore, this study establishes that PAI/ZnS NC can be successfully applied as a low-cost adsorbent and conserve its high efficiency after nine cycles for the removal of AO and RB dyes.

scholarly journals Magnetic/Polyetherimide-Acrylonitrile Composite Nanofibers for Nickel Ions Removal from Aqueous Solution

2020 ◽  
Author(s):  
Muhammaed O Aijaz ◽  
Mohammed R Karim ◽  
Hamad F. Alharbi ◽  
Nabeel H. Alharthi ◽  
Fahad Al-Mubaddel
Keyword(s):  
Aqueous Solution ◽  
Magnetic Nanoparticles ◽  
Aqueous Medium ◽  
Composite Nanofibers ◽  
Adsorption Process ◽  
Composite Membranes ◽  
Polymeric Membrane ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Nickel Ions

Within the study, magnetic/polyetherimide-acrylonitrile composite nanofibers membrane with effective adsorption of nickel ions in aqueous solution were established, through a simple electrospinning method. Iron oxide nanoparticles were stirred and ultrasonically dispersed into polyetherimide-acrylonitrile solution for homogenous suspension. Afterwards, the polyetherimide-acrylonitrile solution with uniform suspension of iron nanoparticles was used in electrospinning machine to produce uniform and smooth nanofibers composite membrane. The confirmation of nanoparticles incorporation into polymeric membrane were characterized by SEM, EDX, FTIR, XRD and nanoparticles aqueous stability through leach out test. The high adsorption capability of the composite membranes on nickel ions was mainly attributed to the combination of magnetic nanoparticles, polyetherimide-acrylonitrile matrix and nano-sized structure of membrane. Membrane containing magnetic nanoparticles demonstrate the maximum adsorption capabilities (102 mg/g) for nickel ions from aqueous solution. Different kinetics and isotherm models were applied to understand the adsorption behavior during adsorption process, amongst them pseudo second order kinetic and Langmuir isotherm model were well fitted. Additionally, EDX, FTIR and XRD results confirmed the presence of nickel ions onto membrane after adsorption process. Polyetherimide-acrylonitrile composite nanofibers membranes containing magnetic nanoparticles may use as an environmentally-friendly and non-toxic adsorbent for the removal of nickel ions in aqueous medium due to its ease of preparation, easy to use and stability in aqueous medium by retaining the nanoparticles inside the nanofibers membranes.

scholarly journals Granules of brick waste (GBW) as low-cost sorbent for removal of Pb+2 ions from aqueous solutions

2020 ◽  
Vol 27 (3) ◽  
pp. 1-8
Author(s):  
Teba H. Mhawesh ◽  
Ziad T. Abd Ali
Keyword(s):  
Aqueous Solutions ◽  
Low Cost ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Sorption Data ◽  
X Ray ◽  
Batch Tests ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The potential application of granules of Granular brick waste as a low-cost sorbent for removal of Pb+2 ions from aqueous solutions has been studied. The properties of Granular brick waste were determined through several tests such as X-Ray diffraction , Energy dispersive X-ray, Scanning electron microscopy , and surface area. In batch tests, the influence of several operating parameters including contact time, initial concentration, agitation speed, and the dose of GBW was investigated. The best values of these parameters that provided maximum removal efficiency of lead (89.5 %) were 2.5 hr, 50 mg/L, 250 rpm, and 1.8 g/100mL, respectively. The sorption data obtained by batch experiments subjected to the three isotherm models called Langmuir, Freundlich and   Elovich. The results showed that the Langmuir isotherm model described well the sorption data (R2= 0.9866) in comparison with other models. The kinetic data were analyzed using two kinetic models called pseudo_first_order and pseudo_second_order. The pseudo-second-order kinetic model was found to agree well with the experimental data.

Sign in / Sign up

Export Citation Format

Share Document