scholarly journals Electrospinning Ag-TiO2 Nanorod-Loaded Air Treatment Filters and Their Applications in Air Purification

Molecules ◽  
2020 ◽  
Vol 25 (15) ◽  
pp. 3369
Author(s):  
Shan-Jiang Wang ◽  
Xiao-Yang Zhang ◽  
Dan Su ◽  
Yun-Fan Wang ◽  
Chun-Meng Qian ◽  
...  
Keyword(s):  
Organic Pollutants ◽  
High Efficiency ◽  
Synergistic Effects ◽  
Cost Effective ◽  
Electrospinning Process ◽  
Advanced Materials ◽  
Superior Performance ◽  
Efficient Treatment ◽  
Air Treatment ◽  
Tio2 Nanorod

The efficient treatment of the problem of air pollution is a practical issue related to human health. The development of multi-functional air treatment filters, which can remove various kinds of pollutants, including particulate matter (PM) and organic gases, is a tireless pursuit aiming to address the actual needs of humans. Advanced materials and nano-manufacturing technology have brought about the opportunity to change conventional air filters for practical demands, with the aim of achieving the high-efficiency utilization of photons, a strong catalytic ability, and the synergetic degradation of multi-pollutants. In this work, visible-responding photocatalytic air treatment filters were prepared and combined with a fast and cost-effective electrospinning process. Firstly, we synthesized Ag-loaded TiO2 nanorod composites with a controlled size and number of loaded Ag nanoparticles. Then, multi-functional air treatment filters were designed by loading catalysts on electrospinning nanofibers combined with a programmable brush. We found that such Ag-TiO2 nanorod composite-loaded nanofibers displayed prominent PM filtration (~90%) and the degradation of organic pollutants (above 90%). The superior performance of purification could be demonstrated in two aspects. One was the improvement of the adsorption of pollutants derived from the increase of the specific surface area after the loading of catalysts, and the other was the plasmonic hot carriers, which induced a broadening of the optical absorption in the visible light range, meaning that many more photons were utilized effectively. The designed air treatment filters with synergistic effects for eliminating both PM and organic pollutants have promising potential for the future design and application of novel air treatment devices.

scholarly journals AMP–Chitosan Coating with Bactericidal Activity in the Presence of Human Plasma Proteins

Molecules ◽  
2020 ◽  
Vol 25 (13) ◽  
pp. 3046 ◽  
Author(s):  
Cláudia Monteiro ◽  
Hélia Fernandes ◽  
Diana Oliveira ◽  
Nuno Vale ◽  
Mariana Barbosa ◽  
...  
Keyword(s):  
Plasma Proteins ◽  
Cost Effective ◽  
Wound Dressings ◽  
Advanced Materials ◽  
Efficient Treatment ◽  
Chitosan Coating ◽  
Bactericidal Properties ◽  
Improved Performance ◽  
Conventional Antibiotics

Antibiotic resistance is increasing and new strategies are needed to fight infection. Advanced materials are promising tools that can be combined with innovative alternatives to conventional antibiotics to allow more targeted and efficient treatment. In this work, we explored the activity against Staphylococcus epidermidis (S. epidermidis) of the α-helical antimicrobial peptide (AMP) MSI-78(4-20) (KFLKKAKKFGKAFVKIL) when covalently bound to a chitosan coating. The AMP MSI-78(4-20) (17 mer) is an improved version of its parent MSI-78 (22 mer; commercially known as Pexiganan), a cost-effective short AMP, which was demonstrated to be as effective as MSI-78 and less toxic to eukaryotic cells. An MSI-78(4-20)–chitosan coating could be applied in several infection scenarios, ranging from bone implants to wound dressings, as chitosan possesses osteoconductive and hemostatic properties. Cysteine-modified MSI-78(4-20) was covalently immobilized onto the chitosan coating through a succinimidyl-[(N-maleimidopropionamido)-octaethyleneglycol] ester (SM(PEG)8), a heterobifuncional crosslinker, with N-hydroxysuccinimide (NHS) ester and maleimide groups, by its N- and C- termini. The MSI-78(4-20)–chitosan coating demonstrated bactericidal properties independently of the tethering site and an improved performance in the presence of plasma proteins, which mimics conditions that will be encountered in vivo. This AMP–chitosan coating has therefore great potential for applications in medical devices such as implants or even wound dressings.

Facile fabrication of direct solid-state Z-scheme g-C3N4/Fe2O3 heterojunction: a cost-effective photocatalyst with high efficiency for the degradation of aqueous organic pollutants

2018 ◽  
Vol 47 (43) ◽  
pp. 15382-15390 ◽  
Author(s):  
Junwei Wang ◽  
Xiaojun Zuo ◽  
Wei Cai ◽  
Jinwei Sun ◽  
Xinlei Ge ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Solid State ◽  
Organic Pollutants ◽  
High Efficiency ◽  
Cost Effective ◽  
Facile Fabrication ◽  
Direct Solid

In situ synthesis of a cost-effective g-C3N4/Fe2O3 hybrid with enhanced photocatalytic activity for the degradation of organic pollutants based on the direct Z-scheme mechanism.

Recent Advances in Heterostructured Photocatalysts for Degradation of Organic Pollutants.

2020 ◽  
Vol 17 ◽  
Author(s):  
Chen-Jing Sun ◽  
Li-Ping Zhao ◽  
Rui Wang
Keyword(s):  
Organic Pollutants ◽  
High Efficiency ◽  
Separation Efficiency ◽  
Organic Pollution ◽  
Utilization Rate ◽  
Type I ◽  
Human Beings ◽  
Global Challenge ◽  
Global Environmental ◽  
High Efficient

: With the development of industrialization, the global environmental pollution and energy crisis are becoming increasingly serious. Organic pollutants pose a serious health threat to human beings and other organisms. The removal of organic pollutants in environment has become a global challenge. The photocatalytic technology has been widely used in the degradation of organic pollutants with its characteristics of simple process, high efficiency, thorough degradation and no secondary pollution. However, the single photocatalyst represented by TiO2 has disadvantages of low light utilization rate and high recombination rate of photocarriers. Building heterojunction is considered one of the most effective methods to enhance the photocatalytic performance of single photocatalyst, which can improve the separation efficiency of photocarriers and utilization of visible light. The classical heterojunction can be divided into four different cases: type I, typeⅡ, p–n heterojunctions and Z-scheme junction. In this paper, the recent progress in the treatment of organic pollution by heterostructure photocatalysts is summarized and the mechanism of heterostructure photocatalysts for the treatment of organic pollutants is reviewed. It is expected that this paper can deepen the understanding of heterostructure photocatalysts and provide guidance for high efficient photocatalytic degradation of organic pollutants in the future.

scholarly journals Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

2021 ◽  
Vol 13 (15) ◽  
pp. 8421
Author(s):  
Yuan Gao ◽  
Jiandong Huang ◽  
Meng Li ◽  
Zhongran Dai ◽  
Rongli Jiang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Practical Applications ◽  
Detailed Structural Analysis ◽  
Alkaline Conditions

Uranium mining waste causes serious radiation-related health and environmental problems. This has encouraged efforts toward U(VI) removal with low cost and high efficiency. Typical uranium adsorbents, such as polymers, geopolymers, zeolites, and MOFs, and their associated high costs limit their practical applications. In this regard, this work found that the natural combusted coal gangue (CCG) could be a potential precursor of cheap sorbents to eliminate U(VI). The removal efficiency was modulated by chemical activation under acid and alkaline conditions, obtaining HCG (CCG activated with HCl) and KCG (CCG activated with KOH), respectively. The detailed structural analysis uncovered that those natural mineral substances, including quartz and kaolinite, were the main components in CCG and HCG. One of the key findings was that kalsilite formed in KCG under a mild synthetic condition can conspicuous enhance the affinity towards U(VI). The best equilibrium adsorption capacity with KCG was observed to be 140 mg/g under pH 6 within 120 min, following a pseudo-second-order kinetic model. To understand the improved adsorption performance, an adsorption mechanism was proposed by evaluating the pH of uranyl solutions, adsorbent dosage, as well as contact time. Combining with the structural analysis, this revealed that the uranyl adsorption process was mainly governed by chemisorption. This study gave rise to a utilization approach for CCG to obtain cost-effective adsorbents and paved a novel way towards eliminating uranium by a waste control by waste strategy.

scholarly journals Optical spin-symmetry breaking for high-efficiency directional helicity-multiplexed metaholograms

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Muhammad Ashar Naveed ◽  
Muhammad Afnan Ansari ◽  
Inki Kim ◽  
Trevon Badloe ◽  
Joohoon Kim ◽  
...  
Keyword(s):  
High Efficiency ◽  
Spin Symmetry ◽  
Cost Effective ◽  
Dielectric Materials ◽  
Additional Degree ◽  
Cost Effective Alternative ◽  
Spin Orbit Interactions ◽  
Smart Mobile ◽  
The Cost ◽  
Hydrogenated Amorphous

AbstractHelicity-multiplexed metasurfaces based on symmetric spin–orbit interactions (SOIs) have practical limits because they cannot provide central-symmetric holographic imaging. Asymmetric SOIs can effectively address such limitations, with several exciting applications in various fields ranging from asymmetric data inscription in communications to dual side displays in smart mobile devices. Low-loss dielectric materials provide an excellent platform for realizing such exotic phenomena efficiently. In this paper, we demonstrate an asymmetric SOI-dependent transmission-type metasurface in the visible domain using hydrogenated amorphous silicon (a-Si:H) nanoresonators. The proposed design approach is equipped with an additional degree of freedom in designing bi-directional helicity-multiplexed metasurfaces by breaking the conventional limit imposed by the symmetric SOI in half employment of metasurfaces for one circular handedness. Two on-axis, distinct wavefronts are produced with high transmission efficiencies, demonstrating the concept of asymmetric wavefront generation in two antiparallel directions. Additionally, the CMOS compatibility of a-Si:H makes it a cost-effective alternative to gallium nitride (GaN) and titanium dioxide (TiO2) for visible light. The cost-effective fabrication and simplicity of the proposed design technique provide an excellent candidate for high-efficiency, multifunctional, and chip-integrated demonstration of various phenomena.

scholarly journals Synergistic Effects of Fe2O3 Nanotube/Polyaniline Composites for an Electrochemical Supercapacitor with Enhanced Capacitance

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1557
Author(s):  
Farkhod Azimov ◽  
Jihee Kim ◽  
Seong Min Choi ◽  
Hyun Min Jung
Keyword(s):  
Electrode Materials ◽  
High Efficiency ◽  
Electrochemical Impedance ◽  
Synergistic Effects ◽  
Structural Development ◽  
Anodized Aluminum ◽  
Anodized Aluminum Oxide ◽  
Inner Diameter ◽  
Polyaniline Composites ◽  
Fe2o3 Nanotubes

α-Fe2O3, which is an attractive material for supercapacitor electrodes, has been studied to address the issue of low capacitance through structural development and complexation to maximize the use of surface pseudocapacitance. In this study, the limited performance of α-Fe2O3 was greatly improved by optimizing the nanotube structure of α-Fe2O3 and its combination with polyaniline (PANI). α-Fe2O3 nanotubes (α-NT) were fabricated in a form in which the thickness and inner diameter of the tube were controlled by Fe(CO)5 vapor deposition using anodized aluminum oxide as a template. PANI was combined with the prepared α-NT in two forms: PANI@α-NT-a enclosed inside and outside with PANI and PANI@α-NT-b containing PANI only on the inside. In contrast to α-NT, which showed a very low specific capacitance, these two composites showed significantly improved capacitances of 185 Fg−1 for PANI@α-NT-a and 62 Fg−1 for PANI@α-NT-b. In the electrochemical impedance spectroscopy analysis, it was observed that the resistance of charge transfer was minimized in PANI@α-NT-a, and the pseudocapacitance on the entire surface of the α-Fe2O3 nanotubes was utilized with high efficiency through binding and conductivity improvements by PANI. PANI@α-NT-a exhibited a capacitance retention of 36% even when the current density was increased 10-fold, and showed excellent stability of 90.1% over 3000 charge–discharge cycles. This approach of incorporating conducting polymers through well-controlled nanostructures suggests a solution to overcome the limitations of α-Fe2O3 electrode materials and improve performance.

Vapor-selective active membrane energy exchanger for high efficiency outdoor air treatment

2021 ◽  
Vol 295 ◽  
pp. 116950
Author(s):  
Andrew J. Fix ◽  
James E. Braun ◽  
David M. Warsinger
Keyword(s):  
High Efficiency ◽  
Outdoor Air ◽  
Air Treatment ◽  
Active Membrane ◽  
Membrane Energy

scholarly journals Sustainable Ventilation Strategies for a Medium-Sized Space with Regional Effect

2021 ◽  
Vol 13 (9) ◽  
pp. 4651
Author(s):  
Ming-Lun Alan Fong
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Co2 Emission ◽  
High Efficiency ◽  
Regional Climate ◽  
Cost Effective ◽  
Regional Effect ◽  
Climate Conditions ◽  
Ventilation Strategies ◽  
Set Up

The analysis of ventilation strategies is fundamentally affected by regional climate conditions and local cost databases, in terms of energy consumption, CO2 emission and cost-effective analysis. A systematic approach is covered in this paper to estimate a local economic and environmental impact on a medium-sized space located in two regions during supply-and-installation and operation phases. Three ventilation strategies, including mixing ventilation (MV), displacement ventilation (DV) and stratum ventilation (SV) were applied to medium-sized air-conditioned space with this approach. The trend of the results for three ventilation systems in the life cycle assessment (LCA) and life cycle cost (LCC) analysis is SV < DV < MV. The result of CO2 emission and regional LCC shows that SV is the lowest one in both regional studies. In comparison with the Hong Kong Special Administrative Region (HKSAR) during 20 Service years, the case analysis demonstrates that the percentage differences in LCC analysis of MV, DV & SV in Guangdong are less than 20.5%, 19.4% and 18.82% respectively. Their CO2 emission of MV, DV and SV in Guangdong are more than HKSAR in 10.69%, 11.22% and 12.05%, respectively. The present study could provide information about regional effects in the LCA and LCC analysis of three ventilation strategies emissions, and thereby help set up models for decision-making on high efficiency and cost-effective ventilation strategy plans.

Solar Thermophotovoltaic Converters Based on Tungsten Emitters

2006 ◽  
Vol 129 (3) ◽  
pp. 298-303 ◽  
Author(s):  
V. M. Andreev ◽  
A. S. Vlasov ◽  
V. P. Khvostikov ◽  
O. A. Khvostikova ◽  
P. Y. Gazaryan ◽  
...  
Keyword(s):  
Band Gap ◽  
High Efficiency ◽  
Radiation Spectrum ◽  
Cost Effective ◽  
Fresnel Lens ◽  
Photocurrent Density ◽  
Back Side ◽  
High Concentration ◽  
Emitter System ◽  
Solar Powered

Results of a solar thermophotovoltaic (STPV) system study are reported. Modeling of the STPV module performance and the analysis of various parameters influencing the system are presented. The ways for the STPV system efficiency to increase and their magnitude are considered such as: improvement of the emitter radiation selectivity and application of selective filters for better matching the emitter radiation spectrum and cell photoresponse; application of the cells with a back side reflector for recycling the sub-band gap photons; and development of low-band gap tandem TPV cells for better utilization of the radiation spectrum. Sunlight concentrator and STPV modules were designed, fabricated, and tested under indoor and outdoor conditions. A cost-effective sunlight concentrator with Fresnel lens was developed as a primary concentrator and a secondary quartz meniscus lens ensured the high concentration ratio of ∼4000×, which is necessary for achieving the high efficiency of the concentrator–emitter system owing to trap escaping radiation. Several types of STPV modules have been developed and tested under concentrated sunlight. Photocurrent density of 4.5A∕cm2 was registered in a photoreceiver based on 1×1cm2GaSb cells under a solar powered tungsten emitter.

Sign in / Sign up

Export Citation Format

Share Document