scholarly journals Varietal and Geographical Origin Characterization of Peaches and Nectarines by Combining Analytical Techniques and Statistical Approach

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4128
Author(s):  
Gabriella Tamasi ◽  
Claudia Bonechi ◽  
Gemma Leone ◽  
Marco Andreassi ◽  
Marco Consumi ◽  
...  
Keyword(s):  
Prunus Persica ◽  
Antioxidant Properties ◽  
Analytical Techniques ◽  
Mediterranean Area ◽  
Analysis Methodology ◽  
Chemometric Approach ◽  
Sims Analysis ◽  
The Comparative Study ◽  
Geographical Characteristics

Prunus persica L. is one of the most important fruit crops in European production, after grapes, apples, oranges and watermelons. Most varieties are rich in secondary metabolites, showing antioxidant properties for human health. The purpose of this study was to develop a chemical analysis methodology, which involves the use of different analytical-instrumental techniques to deepen the knowledge related to the profile of metabolites present in selected cultivars of peaches and nectarines cultivated in the Mediterranean area (Southern Italy). The comparative study was conducted by choosing yellow-fleshed peaches (RomeStar, ZeeLady) and yellow-fleshed nectarines (Nectaross, Venus) from two geographical areas (Piana di Sibari and Piana di Metaponto), and by determining the chemical parameters for the flesh and skin that allow for identification of any distinctive varietal and/or geographical characteristics. A combined analytical and chemometric approach was used, trough rheological, thermogravimetric (TGA), chromatographic (HPLC-ESI-MS), spectroscopic (UV-Vis, ATR-FTIR, NMR) and spectrometric (ToF-SIMS) analysis. This approach allowed us to identify the characterizing parameters for the analysis of a plant matrix so that the developed methodology could define an easily exportable and extendable model for the characterization of other types of vegetable matrices.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Some applications of electron beam microanalysis techniques in VLSI process evaluation

1983 ◽  
Vol 41 ◽  
pp. 160-161
Author(s):  
Simon Thomas
Keyword(s):  
Integrated Circuits ◽  
Process Evaluation ◽  
Large Scale ◽  
Technology Development ◽  
Analytical Techniques ◽  
Successful Implementation ◽  
Analysis Of Failures ◽  
Characterization Of Materials ◽  
Circuits Vlsi

Trends in the technology development of very large scale integrated circuits (VLSI) have been in the direction of higher density of components with smaller dimensions. The scaling down of device dimensions has been not only laterally but also in depth. Such efforts in miniaturization bring with them new developments in materials and processing. Successful implementation of these efforts is, to a large extent, dependent on the proper understanding of the material properties, process technologies and reliability issues, through adequate analytical studies. The analytical instrumentation technology has, fortunately, kept pace with the basic requirements of devices with lateral dimensions in the micron/ submicron range and depths of the order of nonometers. Often, newer analytical techniques have emerged or the more conventional techniques have been adapted to meet the more stringent requirements. As such, a variety of analytical techniques are available today to aid an analyst in the efforts of VLSI process evaluation. Generally such analytical efforts are divided into the characterization of materials, evaluation of processing steps and the analysis of failures.

A very rapid in situ Kikuchi technique to determine relative crystal misorientation

1988 ◽  
Vol 46 ◽  
pp. 830-831
Author(s):  
J. I. Bennetch
Keyword(s):  
Electron Beam ◽  
Analytical Techniques ◽  
Superplastic Forming ◽  
The Other ◽  
Kikuchi Pattern ◽  
Kikuchi Line ◽  
Line Analysis

In a recent study of the superplastic forming (SPF) behavior of certain Al-Li-X alloys, the relative misorientation between adjacent (sub)grains proved to be an important parameter. It is well established that the most accurate way to determine misorientation across boundaries is by Kikuchi line analysis. However, the SPF study required the characterization of a large number of (sub)grains in each sample to be statistically meaningful, a very time-consuming task even for comparatively rapid Kikuchi analytical techniques.In order to circumvent this problem, an alternate, even more rapid in-situ Kikuchi technique was devised, eliminating the need for the developing of negatives and any subsequent measurements on photographic plates. All that is required is a double tilt low backlash goniometer capable of tilting ± 45° in one axis and ± 30° in the other axis. The procedure is as follows. While viewing the microscope screen, one merely tilts the specimen until a standard recognizable reference Kikuchi pattern is centered, making sure, at the same time, that the focused electron beam remains on the (sub)grain in question.

Comparison of Ion-Milling Techniques For Cross-Sectional TEM of Semiconductors

1985 ◽  
Vol 43 ◽  
pp. 166-167
Author(s):  
Julia T. Luck ◽  
C. W. Boggs ◽  
S. J. Pennycook
Keyword(s):  
Analytical Techniques ◽  
Sample Surface ◽  
Ion Milling ◽  
Cross Sectional ◽  
Reliable Technique ◽  
Near Surface ◽  
Transmission Electron ◽  
Thin Region ◽  
Transient Thermal

The use of cross-sectional Transmission Electron Microscopy (TEM) has become invaluable for the characterization of the near-surface regions of semiconductors following ion-implantation and/or transient thermal processing. A fast and reliable technique is required which produces a large thin region while preserving the original sample surface. New analytical techniques, particularly the direct imaging of dopant distributions, also require good thickness uniformity. Two methods of ion milling are commonly used, and are compared below. The older method involves milling with a single gun from each side in turn, whereas a newer method uses two guns to mill from both sides simultaneously.

Exploring the characterization of Ni doped MgO nanoparticles using co-precipitation method

2020 ◽  
Vol 3 (1) ◽  
pp. 30-33
Author(s):  
Muthulakshmi M ◽  
Madhumitha G
Keyword(s):  
Magnesium Oxide ◽  
Analytical Techniques ◽  
Nickel Chloride ◽  
Precipitation Method ◽  
Crystalline Powder ◽  
High Melting Point ◽  
Design Synthesis ◽  
Mgo Nanoparticles ◽  
Co Precipitation

Nanotechnology is a field of applied science focused on design, synthesis and characterization of nanomaterials. The nickel and magnesium have improved their applications in transparent electrodes and nano electronics. In addition, magnesium oxide has moisture resistance and high melting point properties. In the present work has been carried out in the development of green crystalline powder of nickel doped magnesium oxide nanoparticles by Co-precipitation method, from the mixture of nickel chloride and magnesium chloride with KOH as solvent. From the XRD results, crystalline size of the particle can be observed. Spherical structure of Ni doped MgO nanoparticles were indicated by SEM results and powdered composition of samples were obtained from FTIR. EDAX represents the peak composition of the nanoparticle. The above analytical techniques have confirmed that the Ni doped MgO nanoparticles obtained from the mixture of NiCl2 and MgCl2.

Synthesis and characterization of some polyimide-epoxy composites

e-Polymers ◽  
2011 ◽  
Vol 11 (1) ◽  
Author(s):  
Toheed Akhter ◽  
Humaira Masood Siddiqi ◽  
Zareen Akhter ◽  
M. Saeed Butt
Keyword(s):  
Thermal Behavior ◽  
Epoxy Resins ◽  
Analytical Techniques ◽  
Char Yield ◽  
Epoxy Composites ◽  
Hydroxyl Group ◽  
Synthesis And Characterization ◽  
Tetracarboxylic Acid ◽  
Epoxy Amine

AbstractComposites from some novel polyimide and commercial epoxy were prepared aiming to improve the thermal behavior of epoxy resins. Two diamines namely 4-4'-diamino-4''-hydroxytriphenyl methane (DHTM) and 4-4'- diaminotriphenyl methane (DTM) were synthesized by reacting aniline and aldehydes according to a reported method. The synthesized diamines were blended with commercially available epoxy 1, 4-butanedioldiglycidylether (BDDE) to synthesize model epoxy amine networks which were compared with polyimideepoxy composites. The polyimides were synthesized by reaction of these diamines with aromatic anhydride namely 3,3',4,4'-benzophenone tetracarboxylic acid dianhydride (BTDA). These synthesized polyimides were dispersed in epoxy diamine networks to prepare composites. All the monomers and composites were characterized by making use of various analytical techniques including FTIR, NMR, TGA, DSC and XRD. Presence of hydroxyl group in the diamine helped in better dispersion of polyimide leading to high Tg and high char yield at 600 °C.

scholarly journals Morphometric and Nutritional Characterization of the Main Spanish Lentil Cultivars

Agriculture ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 741
Author(s):  
Javier Plaza ◽  
M. Remedios Morales-Corts ◽  
Rodrigo Pérez-Sánchez ◽  
Isabel Revilla ◽  
Ana M. Vivar-Quintana
Keyword(s):  
Scientific Evidence ◽  
Nutrient Content ◽  
Mediterranean Area ◽  
Western Mediterranean ◽  
Protein Food ◽  
Content Assessment ◽  
Protein Levels ◽  
Nutritional Characteristics ◽  
Clear Differentiation

Nowadays, there is a growing demand for high-quality vegetal protein food products, such as pulses and lentils in particular. However, there is no scientific evidence on the nutritional and morphometric characterization of the main lentil cultivars in the Western Mediterranean area. For this reason, the aim of this work is to carry out a morphometric and nutritional characterization of the main Spanish lentil cultivars. Nutrient content assessment was performed on dry matter. The results showed that all studied cultivars are large and heavy lentils, except for the cultivar “Pardina”. They have high protein levels, ranging from 21% to 25%, which is higher than those found in any other pulse, as well as a high carbohydrate content, greater than 59% in all cases. Fiber content was higher than expected in “Armuña” and “Rubia Castellana” cultivars, ranging from 6% to 6.6%, and exceptionally high in the case of the cultivar “Pardina”, which reached 7.8%. Conversely, very low values were found for fat content, varying between 0.5% and 0.9%. Ca, Fe and Mg levels were remarkably higher (from 550 ppm to 851 ppm, from 98 ppm to 139 ppm and from 790 ppm to 989 ppm, respectively) than those found for other lentil cultivars, especially the high Mg content in the cultivars “Jaspeada” and “Microjaspeada”, both above 955 ppm. Clear differentiation was found between the cultivars “Rubia Castellana”, “Pardina” and those included in the Protected Geographical Indication (PGI) “Lenteja de la Armuña”. Overall, lentil cultivars included in the PGI “Lenteja de la Armuña” showed better morphometric and nutritional characteristics than cultivars “Pardina” or “Rubia Castellana”.

scholarly journals Analytical Characterization of Water-Soluble Constituents in Olive-Derived By-Products

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1299
Author(s):  
Pablo Doménech ◽  
Aleta Duque ◽  
Isabel Higueras ◽  
José Luis Fernández ◽  
Paloma Manzanares
Keyword(s):  
Olive Tree ◽  
Mediterranean Area ◽  
Water Soluble ◽  
Olive Pomace ◽  
Olive Leaves ◽  
Olive Stone ◽  
Olive Trees ◽  
Tree Pruning ◽  
By Products

Olive trees constitute one of the largest agroindustries in the Mediterranean area, and their cultivation generates a diverse pool of biomass by-products such as olive tree pruning (OTP), olive leaves (OL), olive stone (OS), and extracted olive pomace (EOP). These lignocellulosic materials have varying compositions and potential utilization strategies within a biorefinery context. The aim of this work was to carry out an integral analysis of the aqueous extractives fraction of these biomasses. Several analytical methods were applied in order to fully characterize this fraction to varying extents: a mass closure of >80% was reached for EOP, >76% for OTP, >65% for OS, and >52% for OL. Among the compounds detected, xylooligosaccharides, mannitol, 3,4-dihydroxyphenylglycol, and hydroxytyrosol were noted as potential enhancers of the valorization of said by-products. The extraction of these compounds is expected to be more favorable for OTP, OL, and EOP, given their high extractives content, and is compatible with other utilization strategies such as the bioconversion of the lignocellulosic fraction into biofuels and bioproducts.

scholarly journals Application of Innovative TGA/Chemometric Approach for Forensic Purposes: The Estimation of the Time since Death in Contaminated Specimens

Diagnostics ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 121
Author(s):  
Roberta Risoluti ◽  
Giuseppina Gullifa ◽  
Vittorio Fineschi ◽  
Paola Frati ◽  
Stefano Materazzi
Keyword(s):  
Multidisciplinary Approach ◽  
Vitreous Humor ◽  
Classification Model ◽  
Forensic Sciences ◽  
Time Since Death ◽  
Time Of Death ◽  
Novel Approach ◽  
Chemometric Approach ◽  
Postmortem Examinations

Chronothanatology has always been a challenge in forensic sciences. Therefore, the importance of a multidisciplinary approach for the characterization of matrices (organs, tissues, or fluids) that respond linearly to the postmortem interval (PMI) is emerging increasingly. The vitreous humor is particularly suitable for studies aimed at assessing time-related modifications because it is topographically isolated and well-protected. In this work, a novel approach based on thermogravimetry and chemometrics was used to estimate the time since death in the vitreous humor and to collect a databank of samples derived from postmortem examinations after medico–legal evaluation. In this study, contaminated and uncontaminated specimens with tissue fragments were included in order to develop a classification model to predict time of death based on partial least squares discriminant analysis (PLS-DA) that was as robust as possible. Results demonstrate the possibility to correctly predict the PMI even in contaminated samples, with an accuracy not lower than 70%. In addition, the correlation coefficient of the measured versus predicted outcomes was found to be 0.9978, confirming the ability of the model to extend its feasibility even to such situations involving contaminated vitreous humor.

scholarly journals Characterization of the antioxidant properties of phenolic extracts from some citrus peels

2011 ◽  
Vol 49 (6) ◽  
pp. 729-736 ◽  
Author(s):  
G. Oboh ◽  
A. O. Ademosun
Keyword(s):  
Antioxidant Properties ◽  
Citrus Peels ◽  
Phenolic Extracts
Sign in / Sign up

Export Citation Format

Share Document