scholarly journals Nano-Crystal and Microstructure Formation in Fluoride Photo-Thermo-Refractive Glass Using Chirp-Controlled Ultrafast Laser Bessel Beams

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1432
Author(s):  
Yunjie Zhang ◽  
Xu Wang ◽  
Guodong Zhang ◽  
Razvan Stoian ◽  
Guanghua Cheng
Keyword(s):  
Heat Treatment ◽  
Treatment Time ◽  
Average Diameter ◽  
Ultrafast Laser ◽  
Heat Treatment Time ◽  
X Ray Diffraction ◽  
Bessel Beams ◽  
X Ray ◽  
Spatial Shape ◽  
Nano Crystal

Nano-crystals were formed in the exposed regions of photo-thermo-refractive glass undergoing irradiation with zeroth order chirp-controlled ultrafast laser Bessel beams and subsequent heat treatment. Effects of various writing powers, pulse durations and heat treatment time on the distribution and the size of the nano-crystals were investigated. The results show that nano-crystals’ distribution depended on the laser power density spatial shape, while the size of the nano-crystals is quasi-independent. However, the average diameter of the nano-crystals was affected by the heat treatment time, decreasing from 175 to 105 nm with the time halved. In addition, using crystallographic characterization by X-ray diffraction, the nano-crystal composition in the laser-exposed regions was detected to be sodium fluoride.

Surface Crystallization of ZnO-Al2O3-SiO2 Glass

2007 ◽  
Vol 280-283 ◽  
pp. 1655-1658
Author(s):  
Xiao Dong Li ◽  
Jie Mo Tian ◽  
Chen Wang ◽  
Li Min Dong
Keyword(s):  
Heat Treatment ◽  
Treatment Time ◽  
Glass Ceramics ◽  
Surface Crystallization ◽  
X Ray Diffraction ◽  
Crystalline Layer ◽  
Surface Conditions ◽  
X Ray ◽  
Treatment Processes ◽  
Electronic Microscope

ZnO-Al2O3-SiO2 glasses with different surface conditions were surface crystallized by different heat treatment process. Differential thermal analysis (DTA), X-ray diffraction analysis (XRD) and scanning electronic microscope (SEM) were used to investigate the crystallization behavior of glasses, the crystalline components and microstructure of the as-got glass-ceramics. According to the DTA results, different heat treatment processes of surface crystallization on the glass were adopted. The SEM results show that surface conditions of glasses are important for the surface crystallization, and the thickness of surface crystalline layer increases with heat treatment time.

scholarly journals Synthesis of LiNiO2 by two-step solid-state method

2018 ◽  
Vol 36 (1) ◽  
pp. 107-111 ◽  
Author(s):  
Shuiping Li ◽  
Qisheng Wu ◽  
Chun Zhang ◽  
Huajun Zhu ◽  
Changsen Zhang ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Solid State ◽  
Treatment Time ◽  
Raw Materials ◽  
Perfect Crystal ◽  
X Ray Diffraction ◽  
Mechanochemical Method ◽  
Solid State Method ◽  
X Ray ◽  
Grinding Speed

AbstractLiNiO2 was prepared through two-step solid-state reaction by mechanochemical method and heat treatment, using LiOH (Li2CO3) and Ni(OH)2 as starting materials. The influence of grinding speed and time, heat treatment time, and starting materials on the structure of LiNiO2 was studied. The as-milled samples and products were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The results show that uniform as-milled samples can be obtained at grinding speed of 580 rpm for 0.5 h, using LiOH and Ni(OH)2 as raw materials. Perfect crystal LiNiO2 has been prepared by calcining the as-milled samples at 700 °C for 15 h. Composite material powders consisting of Li2Ni8O10 and LiNiO2 have been obtained using Li2CO3 as lithium source.

scholarly journals X-ray Determination of Compressive Residual Stresses in Spring Steel Generated by High-Speed Water Quenching

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1154
Author(s):  
Diego E. Lozano ◽  
George E. Totten ◽  
Yaneth Bedolla-Gil ◽  
Martha Guerrero-Mata ◽  
Marcel Carpio ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Residual Stresses ◽  
High Speed ◽  
Spring Steel ◽  
X Ray Diffraction ◽  
Laboratory Equipment ◽  
X Ray ◽  
Water Chamber ◽  
Hardened Case ◽  
Compressive Residual Stresses

Automotive components manufacturers use the 5160 steel in leaf and coil springs. The industrial heat treatment process consists in austenitizing followed by the oil quenching and tempering process. Typically, compressive residual stresses are induced by shot peening on the surface of automotive springs to bestow compressive residual stresses that improve the fatigue resistance and increase the service life of the parts after heat treatment. In this work, a high-speed quenching was used to achieve compressive residual stresses on the surface of AISI/SAE 5160 steel samples by producing high thermal gradients and interrupting the cooling in order to generate a case-core microstructure. A special laboratory equipment was designed and built, which uses water as the quenching media in a high-speed water chamber. The severity of the cooling was characterized with embedded thermocouples to obtain the cooling curves at different depths from the surface. Samples were cooled for various times to produce different hardened case depths. The microstructure of specimens was observed with a scanning electron microscope (SEM). X-ray diffraction (XRD) was used to estimate the magnitude of residual stresses on the surface of the specimens. Compressive residual stresses at the surface and sub-surface of about −700 MPa were obtained.

Phase selection in precursor-derived yttrium aluminum garnet and related Al2O3–Y2O3 compositions

2005 ◽  
Vol 20 (4) ◽  
pp. 1017-1025 ◽  
Author(s):  
Ashutosh S. Gandhi ◽  
Carlos G. Levi
Keyword(s):  
Heat Treatment ◽  
Yttrium Aluminum Garnet ◽  
Lattice Parameter ◽  
Defect Structures ◽  
X Ray Diffraction ◽  
Phase Selection ◽  
X Ray ◽  
Yttrium Aluminum ◽  
Rich Side ◽  
Nitrate Solutions

Al2O3–Y2O3 powders were synthesized in the range of 25–55% Y2O3 by reverse coprecipitation of nitrate solutions. All starting powders were amorphous and formed primary yttrium aluminum garnet (YAG) upon crystallization. X-ray diffraction detected only garnet in compositions of 30–40% Y2O3 after heat treatment at 1250 °C. Compositions of 45–55% Y2O3 established a metastable YAG + Y4Al2O9 microstructure. The YAG phase field was metastably extended away from its stoichiometry, as indicated by a systematic increase in lattice parameter with Y2O3 content. Although some Al2O3 enrichment was achieved, YAG appears to tolerate greater off-stoichiometry on the Y2O3-rich side. Possible defect structures accommodating the solubility extension were examined. Phase selection results indicate that compositional inhomogeneity is not the only reason behind the appearance of hexagonal YAlO3, which is frequently reported during YAG synthesis.

In Situ X-Ray Diffraction Studies of Crystallization Growth Behavior in ZnO-Bi2O3-B2O3 Glass as a Route to Functional Optical Devices

MRS Advances ◽  
2018 ◽  
Vol 3 (11) ◽  
pp. 563-567 ◽  
Author(s):  
Quentin Altemose ◽  
Katrina Raichle ◽  
Brittani Schnable ◽  
Casey Schwarz ◽  
Myungkoo Kang ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Glass Ceramics ◽  
Treatment Temperature ◽  
Crystal Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
In Situ Xrd ◽  
Dsc Measurements ◽  
Transmission Window

ABSTRACTTransparent optical ZnO–Bi2O3–B2O3 (ZBB) glass-ceramics were created by the melt quenching technique. In this work, a melt of the glass containing stoichiometric ratios of Zn/Bi/B and As was studied. Differential scanning calorimeter (DSC) measurements was used to measure the thermal behavior. VIS/NIR transmission measurements were used to determine the transmission window. X-ray diffraction (XRD) was used to determine crystal phase. In this study, we explore new techniques and report a detailed study of in-situ XRD of the ZBB composition in order to correlate nucleation temperature, heat treatment temperature, and heat treatment duration with induced crystal phase.

TEM and X-Ray Examinations of Intermetallic Phases and Carbides Precipitation in an Fe-Ni Superalloy during Prolonged Ageing

2013 ◽  
Vol 212 ◽  
pp. 15-20
Author(s):  
Kazimierz J. Ducki ◽  
Jacek Mendala ◽  
Lilianna Wojtynek
Keyword(s):  
Heat Treatment ◽  
Solution Heat Treatment ◽  
Intermetallic Phase ◽  
Intermetallic Phases ◽  
Precipitation Process ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
Solid Samples ◽  
Structural Investigations ◽  
X Ray

The influence of prolonged ageing on the precipitation process of the secondary phases in an Fe-Ni superalloy of A-286 type has been studied. The samples were subjected to a solution heat treatment at 980°C for 2 h and water quenched, and then aged at temperatures of 715, 750 and 780°C at holding times from 0.5 to 500 h. Structural investigations were conducted using TEM and X-ray diffraction methods. The X-ray phase analyses performed on the isolates were obtained by anodic dissolution of the solid samples. After solution heat treatment the alloy has the structure of twinned austenite with a small amount of undissolved precipitates, such as carbide TiC, carbonitride TiC0.3N0.7, nitride TiN0.3, carbosulfide Ti4C2S2, Laves phase Ni2Si, and boride MoB. The application of ageing causes precipitation processes of γ-Ni3(Al,Ti), G (Ni16Ti6Si7), η (Ni3Ti), β (NiTi) and σ (Cr0.46Mo0.40Si0.14) intermetallic phases, as well as the carbide M23C6. It was found that the main phase precipitating during alloy ageing was the γ intermetallic phase.

Hardening of Selective Laser Melted M2 Steel

2021 ◽  
Author(s):  
Mei Yang ◽  
Yishu Zhang ◽  
Haoxing You ◽  
Richard Smith ◽  
Richard D. Sisson
Keyword(s):  
Heat Treatment ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
High Hardness ◽  
Steel Part ◽  
X Ray Diffraction ◽  
X Ray ◽  
Heat Treated ◽  
Near Net Shape

Abstract Selective laser melting (SLM) is an additive manufacturing technique that can be used to make the near-net-shape metal parts. M2 is a high-speed steel widely used in cutting tools, which is due to its high hardness of this steel. Conventionally, the hardening heat treatment process, including quenching and tempering, is conducted to achieve the high hardness for M2 wrought parts. It was debated if the hardening is needed for additively manufactured M2 parts. In the present work, the M2 steel part is fabricated by SLM. It is found that the hardness of as-fabricated M2 SLM parts is much lower than the hardened M2 wrought parts. The characterization was conducted including X-ray diffraction (XRD), optical microscopy, Scanning Electron Microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) to investigate the microstructure evolution of as-fabricated, quenched, and tempered M2 SLM part. The M2 wrought part was heat-treated simultaneously with the SLM part for comparison. It was found the hardness of M2 SLM part after heat treatment is increased and comparable to the wrought part. Both quenched and tempered M2 SLM and wrought parts have the same microstructure, while the size of the carbides in the wrought part is larger than that in the SLM part.

scholarly journals Synchrotron Nano-Diffraction Study of Thermally Treated Asbestos Tremolite from Val d’Ala, Turin (Italy)

Minerals ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 311 ◽  
Author(s):  
Carlotta Giacobbe ◽  
Jonathan Wright ◽  
Dario Di Giuseppe ◽  
Alessandro Zoboli ◽  
Mauro Zapparoli ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Heat Treatment ◽  
Risk Management ◽  
Structure Analysis ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adverse Health Effects ◽  
Nano Crystalline ◽  
Original Fibre

Nowadays, due to the adverse health effects associated with exposure to asbestos, its removal and thermal inertization has become one of the most promising ways for reducing waste risk management. Despite all the advances in structure analysis of fibers and characterization, some problems still remain that are very hard to solve. One challenge is the structure analysis of natural micro- and nano-crystalline samples, which do not form crystals large enough for single-crystal X-ray diffraction (SC-XRD), and their analysis is often hampered by reflection overlap and the coexistence of multiple fibres linked together. In this paper, we have used nano-focused synchrotron X-rays to refine the crystal structure of a micrometric tremolite fibres from Val d’Ala, Turin (Italy) after various heat treatment. The structure of the original fibre and after heating to 800 °C show minor differences, while the fibre that was heated at 1000 °C is recrystallized into pyroxene phases and cristobalite.

Sign in / Sign up

Export Citation Format

Share Document