scholarly journals Flexible and Highly Sensitive Pressure Sensors Based on Microstructured Carbon Nanowalls Electrodes

Nanomaterials ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 496 ◽  
Author(s):  
Xi Zhou ◽  
Yongna Zhang ◽  
Jun Yang ◽  
Jialu Li ◽  
Shi Luo ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Limit Of Detection ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Physiological Signals ◽  
Healthcare Applications ◽  
Highly Sensitive ◽  
Carbon Nanowalls ◽  
Pressure Regime

Wearable pressure sensors have attracted widespread attention in recent years because of their great potential in human healthcare applications such as physiological signals monitoring. A desirable pressure sensor should possess the advantages of high sensitivity, a simple manufacturing process, and good stability. Here, we present a highly sensitive, simply fabricated wearable resistive pressure sensor based on three-dimensional microstructured carbon nanowalls (CNWs) embedded in a polydimethylsiloxane (PDMS) substrate. The method of using unpolished silicon wafers as templates provides an easy approach to fabricate the irregular microstructure of CNWs/PDMS electrodes, which plays a significant role in increasing the sensitivity and stability of resistive pressure sensors. The sensitivity of the CNWs/PDMS pressure sensor with irregular microstructures is as high as 6.64 kPa−1 in the low-pressure regime, and remains fairly high (0.15 kPa−1) in the high-pressure regime (~10 kPa). Both the relatively short response time of ~30 ms and good reproducibility over 1000 cycles of pressure loading and unloading tests illustrate the high performance of the proposed device. Our pressure sensor exhibits a superior minimal limit of detection of 0.6 Pa, which shows promising potential in detecting human physiological signals such as heart rate. Moreover, it can be turned into an 8 × 8 pixels array to map spatial pressure distribution and realize array sensing imaging.

scholarly journals A Soft Pressure Sensor Array Based on a Conducting Nanomembrane

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 933
Author(s):  
Daekwang Jung ◽  
Kyumin Kang ◽  
Hyunjin Jung ◽  
Duhwan Seong ◽  
Soojung An ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Sensor Array ◽  
Pressure Sensors ◽  
Strain Range ◽  
High Sensitivity ◽  
Critical Issue ◽  
Mechanical Stimuli ◽  
Highly Sensitive ◽  
Accumulated Strain

Although skin-like pressure sensors exhibit high sensitivity with a high performance over a wide area, they have limitations owing to the critical issue of being linear only in a narrow strain range. Various strategies have been proposed to improve the performance of soft pressure sensors, but such a nonlinearity issue still exists and the sensors are only effective within a very narrow strain range. Herein, we fabricated a highly sensitive multi-channel pressure sensor array by using a simple thermal evaporation process of conducting nanomembranes onto a stretchable substrate. A rigid-island structure capable of dissipating accumulated strain energy induced by external mechanical stimuli was adopted for the sensor. The performance of the sensor was precisely controlled by optimizing the thickness of the stretchable substrate and the number of serpentines of an Au membrane. The fabricated sensor exhibited a sensitivity of 0.675 kPa−1 in the broad pressure range of 2.3–50 kPa with linearity (~0.990), and good stability (>300 Cycles). Finally, we successfully demonstrated a mapping of pressure distribution.

scholarly journals Nano Carbon Black-Based High Performance Wearable Pressure Sensors

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 664 ◽  
Author(s):  
Junsong Hu ◽  
Junsheng Yu ◽  
Ying Li ◽  
Xiaoqing Liao ◽  
Xingwu Yan ◽  
...  
Keyword(s):  
Carbon Black ◽  
Pressure Sensor ◽  
High Performance ◽  
Large Scale ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Atmospheric Pollutant ◽  
Piezoresistive Pressure Sensor ◽  
Nano Carbon

The reasonable design pattern of flexible pressure sensors with excellent performance and prominent features including high sensitivity and a relatively wide workable linear range has attracted significant attention owing to their potential application in the advanced wearable electronics and artificial intelligence fields. Herein, nano carbon black from kerosene soot, an atmospheric pollutant generated during the insufficient burning of hydrocarbon fuels, was utilized as the conductive material with a bottom interdigitated textile electrode screen printed using silver paste to construct a piezoresistive pressure sensor with prominent performance. Owing to the distinct loose porous structure, the lumpy surface roughness of the fabric electrodes, and the softness of polydimethylsiloxane, the piezoresistive pressure sensor exhibited superior detection performance, including high sensitivity (31.63 kPa−1 within the range of 0–2 kPa), a relatively large feasible range (0–15 kPa), a low detection limit (2.26 pa), and a rapid response time (15 ms). Thus, these sensors act as outstanding candidates for detecting the human physiological signal and large-scale limb movement, showing their broad range of application prospects in the advanced wearable electronics field.

scholarly journals Flexible Ecoflex®/Graphene Nanoplatelet Foams for Highly Sensitive Low-Pressure Sensors

Sensors ◽  
2020 ◽  
Vol 20 (16) ◽  
pp. 4406
Author(s):  
Marco Fortunato ◽  
Irene Bellagamba ◽  
Alessio Tamburrano ◽  
Maria Sabrina Sarto
Keyword(s):  
High Performance ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Cost Effective ◽  
Low Pressure ◽  
Human Motion ◽  
Compression Tests ◽  
Piezoresistive Sensors ◽  
Human Motion Detection ◽  
Pressure Regime

The high demand for multifunctional devices for smart clothing applications, human motion detection, soft robotics, and artificial electronic skins has encouraged researchers to develop new high-performance flexible sensors. In this work, we fabricated and tested new 3D squeezable Ecoflex® open cell foams loaded with different concentrations of graphene nanoplatelets (GNPs) in order to obtain lightweight, soft, and cost-effective piezoresistive sensors with high sensitivity in a low-pressure regime. We analyzed the morphology of the produced materials and characterized both the mechanical and piezoresistive response of samples through quasi-static cyclic compression tests. Results indicated that sensors infiltrated with 1 mg of ethanol/GNP solution with a GNP concentration of 3 mg/mL were more sensitive and stable compared to those infiltrated with the same amount of ethanol/GNP solution but with a lower GNP concentration. The electromechanical response of the sensors showed a negative piezoresistive behavior up to ~10 kPa and an opposite trend for the 10–40 kPa range. The sensors were particularly sensitive at very low deformations, thus obtaining a maximum sensitivity of 0.28 kPa−1 for pressures lower than 10 kPa.

scholarly journals Hierarchical network enabled flexible textile pressure sensors with ultra-high sensitivity, ultra-wide linearity and high-temperature resistance

2021 ◽  
Author(s):  
Meiling Jia ◽  
Chenghan Yi ◽  
Yankun Han ◽  
Xin Li ◽  
Guoliang Xu ◽  
...  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Pressure Sensor ◽  
High Performance ◽  
Full Range ◽  
Pressure Sensors ◽  
Fiber Surface ◽  
High Sensitivity ◽  
Harsh Environments ◽  
Point To Point

Abstract Thin, lightweight, and flexible textile pressure sensors with the ability to precisely detect the full range of faint pressure (< 100 Pa), low pressure (in the range of KPa) and high pressure (in the range of MPa) are in significant demand to meet the requirements for applications in daily activities and more meaningfully in some harsh environments, such as high temperature and high pressure. However, it is still a major challenge to fulfill these requirements simultaneously in a single pressure sensor. Herein, a high-performance pressure sensor enabled by polyimide fiber fabric with functionalized carbon-nanotube (PI/FCNT) is obtained via a facile electrophoretic deposition (EPD) approach. High-density FCNT is evenly wrapped and chemically bonded to the fiber surface during the EPD process, forming a conductive hierarchical fiber/FCNT matrix. Benefiting from the abundant yet firm contacting points, point-to-point contacting mode, and high elastic modulus of both PI and CNT, the proposed PI/FCNT pressure sensor exhibits ultra-high sensitivity (3.57 MPa− 1), ultra-wide linearity (3.24 MPa), exceptionally broad sensing range (~ 45 MPa), and long-term stability (> 4000 cycles). Furthermore, under a high working temperature of 200 ºC, the proposed sensor device still shows an ultra-high sensitivity of 2.64 MPa− 1 within a wide linear range of 7.2 MPa, attributing to its intrinsic high-temperature-resistant properties of PI and CNT. Thanks to these merits, the proposed PI/FCNT(EPD) pressure sensor could serve as an E-skin device to monitor the human physiological information, precisely detect tiny and extremely high pressure, and can be integrated into an intelligent mechanical hand to detect the contact force under high-temperature (> 300 ºC), endowing it with high applicability in the fields of real-time health monitoring, intelligent robots, and harsh environments.

scholarly journals High-Sensitivity Flexible Pressure Sensor-Based 3D CNTs Sponge for Human–Computer Interaction

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3465
Author(s):  
Jianli Cui ◽  
Xueli Nan ◽  
Guirong Shao ◽  
Huixia Sun
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Pressure Sensors ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Wide Range ◽  
Flexible Pressure Sensors

Researchers are showing an increasing interest in high-performance flexible pressure sensors owing to their potential uses in wearable electronics, bionic skin, and human–machine interactions, etc. However, the vast majority of these flexible pressure sensors require extensive nano-architectural design, which both complicates their manufacturing and is time-consuming. Thus, a low-cost technology which can be applied on a large scale is highly desirable for the manufacture of flexible pressure-sensitive materials that have a high sensitivity over a wide range of pressures. This work is based on the use of a three-dimensional elastic porous carbon nanotubes (CNTs) sponge as the conductive layer to fabricate a novel flexible piezoresistive sensor. The synthesis of a CNTs sponge was achieved by chemical vapor deposition, the basic underlying principle governing the sensing behavior of the CNTs sponge-based pressure sensor and was illustrated by employing in situ scanning electron microscopy. The CNTs sponge-based sensor has a quick response time of ~105 ms, a high sensitivity extending across a broad pressure range (less than 10 kPa for 809 kPa−1) and possesses an outstanding permanence over 4,000 cycles. Furthermore, a 16-pixel wireless sensor system was designed and a series of applications have been demonstrated. Its potential applications in the visualizing pressure distribution and an example of human–machine communication were also demonstrated.

Ultrahigh Sensitivity Micro-cliff Graphene Wearable Pressure Sensor Made by Instant Flash Light Exposure

Nanoscale ◽  
2021 ◽  
Author(s):  
Yachu Zhang ◽  
Han Lin ◽  
Fei Meng ◽  
Huai Liu ◽  
David Mesa ◽  
...  
Keyword(s):  
Health Monitoring ◽  
Pressure Sensor ◽  
Biomedical Applications ◽  
Light Exposure ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Fast Response ◽  
Highly Sensitive ◽  
Ultrahigh Sensitivity ◽  
Sensitive Pressure

Wearable and highly sensitive pressure sensors are of great importance for robotics, health monitoring and biomedical applications. Simultaneously achieving high sensitivity within a broad working range, fast response time (within...

scholarly journals A new strategy for the fabrication of a flexible and highly sensitive capacitive pressure sensor

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Ruzhan Qin ◽  
Mingjun Hu ◽  
Xin Li ◽  
Te Liang ◽  
Haoyi Tan ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Capacitive Sensor ◽  
Capacitive Pressure Sensor ◽  
Interdigital Electrode ◽  
Interdigital Electrodes ◽  
Highly Sensitive ◽  
New Strategy ◽  
Application Prospects

AbstractThe development of flexible capacitive pressure sensors has wide application prospects in the fields of electronic skin and intelligent wearable electronic devices, but it is still a great challenge to fabricate capacitive sensors with high sensitivity. Few reports have considered the use of interdigital electrode structures to improve the sensitivity of capacitive pressure sensors. In this work, a new strategy for the fabrication of a high-performance capacitive flexible pressure sensor based on MXene/polyvinylpyrrolidone (PVP) by an interdigital electrode is reported. By increasing the number of interdigital electrodes and selecting the appropriate dielectric layer, the sensitivity of the capacitive sensor can be improved. The capacitive sensor based on MXene/PVP here has a high sensitivity (~1.25 kPa−1), low detection limit (~0.6 Pa), wide sensing range (up to 294 kPa), fast response and recovery times (~30/15 ms) and mechanical stability of 10000 cycles. The presented sensor here can be used for various pressure detection applications, such as finger pressing, wrist pulse measuring, breathing, swallowing and speech recognition. This work provides a new method of using interdigital electrodes to fabricate a highly sensitive capacitive sensor with very promising application prospects in flexible sensors and wearable electronics.

Wearable and visual pressure sensors based on Zn2GeO4@polypyrrole nanowire aerogels

2017 ◽  
Vol 5 (42) ◽  
pp. 11018-11024 ◽  
Author(s):  
Jie Xue ◽  
Jiawei Chen ◽  
Jizhong Song ◽  
Leimeng Xu ◽  
Haibo Zeng
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Light Emitting Diode ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Light Emitting

A high-performance and tailorable pressure sensor based on the Zn2GeO4@PPy nanowire aerogel for applications in visual and wearable fields has been developed and show high sensitivity of the pressure sensor (0.38 kPa−1at pressure regions less than 1.5 kPa). We also combined the aerogels with Light Emitting Diode which make a visible sensor come true.

scholarly journals A flexible and highly sensitive pressure sensor based on three-dimensional electrospun carbon nanofibers

RSC Advances ◽  
2021 ◽  
Vol 11 (23) ◽  
pp. 13898-13905
Author(s):  
Chuan Cai ◽  
He Gong ◽  
Weiping Li ◽  
Feng Gao ◽  
Qiushi Jiang ◽  
...  
Keyword(s):  
Carbon Nanofibers ◽  
Pressure Sensor ◽  
Carbon Nanofiber ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Highly Sensitive ◽  
Sensitive Pressure

A three-dimensional electrospun carbon nanofiber network was used to measure press strains with high sensitivity.

Core-shell Cu@C@ZIF-8 composite: a high-performance electrode material for electrochemical sensing of nitrite with high selectivity and sensitivity

2021 ◽  
Author(s):  
Feng Gao ◽  
Xiaolong Tu ◽  
Yongfang Yu ◽  
Yansha Gao ◽  
Jin Zou ◽  
...  
Keyword(s):  
High Performance ◽  
High Selectivity ◽  
Limit Of Detection ◽  
Metal Organic Framework ◽  
High Sensitivity ◽  
Electrochemical Sensing ◽  
Core Shell ◽  
Zeolitic Imidazolate Framework ◽  
Sensing Platform ◽  
The Difference

Abstract Herein, an efficient electrochemical sensing platform is proposed for selective and sensitive detection of nitrite on the basis of Cu@C@Zeolitic imidazolate framework-8 (Cu@C@ZIF-8) heterostructure. Core-shell Cu@C@ZIF-8 composite was synthesized by pyrolysis of Cu-metal-organic framework@ZIF-8 (Cu-MOF@ZIF-8) in Ar atmosphere on account of the difference of thermal stability between Cu-MOF and ZIF-8. For the sensing system of Cu@C@ZIF-8, ZIF-8 with proper pore size allows nitrite diffuse through the shell, while big molecules cannot, which ensures high selectivity of the sensor. On the other hand, Cu@C as electrocatalyst promotes the oxidation of nitrite, thereby resulting high sensitivity of the sensor. Accordingly, the Cu@C@ZIF-8 based sensor presents excellent performance for nitrite detection, which achieves a wide linear response range of 0.1 µM to 300.0 µM, and a low limit of detection (LOD) of 0.033 µM. In addition, the Cu@C@ZIF-8 sensor possesses excellent stability and reproducibility, and was employed to quantify nitrite in sausage samples with recoveries of 95.45-104.80%.

Sign in / Sign up

Export Citation Format

Share Document